The dot package v1.1.2 uses Function() to compile templates. This can be exploited by the attacker if they can control the given template or if they can control the value set on Object.prototype.

The is a code injection vulnerability in versions of Rails prior to 5.0.1 that wouldallow an attacker who controlled the `locals` argument of a `render` call to perform a RCE.

Service Data Download in SAP Application Server ABAP (ST-PI, before versions 2008_1_46C, 2008_1_620, 2008_1_640, 2008_1_700, 2008_1_710, 740) allows an attacker to inject code that can be executed by the application. An attacker could thereby control the behavior of the application and the whole ABAP system leading to Code Injection.

Under certain conditions, SAP Adaptive Server Enterprise (XP Server on Windows Platform), versions 15.7, 16.0, does not perform the necessary checks for an authenticated user while executing the extended stored procedure, allowing an attacker to read, modify, delete restricted data on connected servers, leading to Code Injection.

CuteNews 2.0.1 allows remote authenticated attackers to execute arbitrary PHP code via unspecified vectors.

Grandstream GXP1600 series firmware 1.0.4.152 and below is vulnerable to authenticated remote command execution when an attacker adds an OpenVPN up script to the phone's VPN settings via the "Additional Settings" field in the web interface. When the VPN's connection is established, the user defined script is executed with root privileges.

A vulnerability has been found in Magic-Api up to 2.0.1 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /resource/file/api/save?auto=1. The manipulation leads to code injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249511.

Yii Yii2 Gii before 2.2.2 allows remote attackers to execute arbitrary code via the Generator.php messageCategory field. The attacker can embed arbitrary PHP code into the model file.

Improper Control of Generation of Code ('Code Injection') in NetScaler ADC and NetScaler Gateway allows an attacker with access to NSIP, CLIP or SNIP with management interface to perform Authenticated (low privileged) remote code execution on Management Interface.

Improper Input Validation in Nagios Fusion 4.1.8 and earlier allows an authenticated attacker to execute remote code via table pagination.

Real Time Logic FuguHub v8.1 and earlier was discovered to contain a remote code execution (RCE) vulnerability via the component /FuguHub/cmsdocs/.

This vulnerability allows an remote attacker with low privileges to misuse Improper Control of Generation of Code ('Code Injection') to gain full control of the affected device.

In CMSuno 1.6.2, an attacker can inject malicious PHP code as a "username" while changing his/her username & password. After that, when attacker logs in to the application, attacker's code will be run. As a result of this vulnerability, authenticated user can run command on the server.

A vulnerability was found in web-arena-x webarena up to 0.2.0. It has been declared as critical. This vulnerability affects the function HTMLContentEvaluator of the file webarena/evaluation_harness/evaluators.py. The manipulation of the argument target["url"] leads to code injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

openmediavault before 4.1.36 and 5.x before 5.5.12 allows authenticated PHP code injection attacks, via the sortfield POST parameter of rpc.php, because json_encode_safe is not used in config/databasebackend.inc. Successful exploitation allows arbitrary command execution on the underlying operating system as root.

An authenticated attacker can inject malicious code into "lang" parameter in /uno/central.php file in CMSuno 1.6.2 and run this PHP code in the web page. In this way, attacker can takeover the control of the server.

Modelina is a library for generating data models based on inputs such as AsyncAPI, OpenAPI, or JSON Schema documents. Versions prior to 1.0.0 are vulnerable to Code injection. This issue affects anyone who is using the default presets and/or does not handle the functionality themself. This issue has been partially mitigated in version 1.0.0, with the maintainer's GitHub Security Advisory (GHSA) noting "It is impossible to fully guard against this, because users have access to the original raw information. However, as of version 1, if you only access the constrained models, you will not encounter this issue. Further similar situations are NOT seen as a security issue, but intended behavior." The suggested workaround from the maintainers is "Fully custom presets that change the entire rendering process which can then escape the user input."

Improper Control of Generation of Code ('Code Injection') vulnerability in Soft8Soft LLC Verge3D Publishing and E-Commerce.This issue affects Verge3D Publishing and E-Commerce: from n/a through 4.5.2.

Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to versions 3.1.45 and 4.1.1, template authors could inject php code by choosing a malicious {block} name or {include} file name. Sites that cannot fully trust template authors should upgrade to versions 3.1.45 or 4.1.1 to receive a patch for this issue. There are currently no known workarounds.

A code injection vulnerability exists in one of the webpages in GE Reason RT430, RT431 & RT434 GNSS clocks in firmware versions prior to version 08A06 that could allow an authenticated remote attacker to execute arbitrary code on the system.

A remote code injection vulnerability was discovered in HPE KVM IP Console Switches version(s): G2 4x1Ex32 Prior to 2.8.3.

Wazuh is a free and open source platform used for threat prevention, detection, and response. A wrong validation in the `host_deny` script allows to write any string in the `hosts.deny` file, which can end in an arbitrary command execution on the target system. This vulnerability is part of the active response feature, which can automatically triggers actions in response to alerts. By default, active responses are limited to a set of pre defined executables. This is enforced by only allowing executables stored under `/var/ossec/active-response/bin` to be run as an active response. However, the `/var/ossec/active-response/bin/host_deny` can be exploited. `host_deny` is used to add IP address to the `/etc/hosts.deny` file to block incoming connections on a service level by using TCP wrappers. Attacker can inject arbitrary command into the `/etc/hosts.deny` file and execute arbitrary command by using the spawn directive. The active response can be triggered by writing events either to the local `execd` queue on server or to the `ar` queue which forwards the events to agents. So, it can leads to LPE on server as root and RCE on agent as root. This vulnerability is fixed in 4.7.2.

Myucms v2.2.1 contains a remote code execution (RCE) vulnerability in the component \controller\Config.php, which can be exploited via the add() method.

phpCMS 2008 sp4 allowas remote malicious users to execute arbitrary php commands via the pagesize parameter to yp/product.php.

Monstra CMS 3.0.4 allows attackers to execute arbitrary code via a crafted payload entered into the "Snippet content" field under the "Edit Snippet" module.

A flaw was found in Moodle. A remote code execution risk was identified in the Moodle LMS EQUELLA repository. By default, this was only available to teachers and managers on sites with the EQUELLA repository enabled.

A flaw was found in Moodle. A remote code execution risk was identified in the Moodle LMS Dropbox repository. By default, this was only available to teachers and managers on sites with the Dropbox repository enabled.

Improper Control of Generation of Code ('Code Injection') vulnerability in Brainstorm Force Astra Pro.This issue affects Astra Pro: from n/a through 4.3.1.

A remote code execution (RCE) vulnerability in /root/run/adm.php?admin-ediy&part=exdiy of imcat v5.1 allows authenticated attackers to execute arbitrary code.

Code Injection in GitHub repository lirantal/daloradius prior to master-branch.

Code injection via nginx.ingress.kubernetes.io/permanent-redirect annotation.

Malicious code injection in Apache Ambari in prior to 2.7.8. Users are recommended to upgrade to version 2.7.8, which fixes this issue. Impact: A Cluster Operator can manipulate the request by adding a malicious code injection and gain a root over the cluster main host.

Usermin 0.980 through 1.x before 1.660 allows uconfig_save.cgi sig_file_free remote code execution because it uses the two argument (not three argument) form of Perl open.

SeaCMS v12.9 was discovered to contain a remote code execution (RCE) vulnerability via the component /augap/adminip.php.

Improper Control of Generation of Code ('Code Injection') vulnerability in Qode Interactive Qode Essential Addons.This issue affects Qode Essential Addons: from n/a through 1.5.2.

Wuzhi CMS v4.1.0 contains a remote code execution (RCE) vulnerability in \attachment\admin\index.php.

An issue discovered in OpenCart 4.0.0.0 to 4.0.2.3 allows authenticated backend users having common/security write privilege can write arbitrary untrusted data inside config.php and admin/config.php, resulting in remote code execution on the underlying server.

Subrion 4.2.1 has a remote command execution vulnerability in the backend.

DNN (aka DotNetNuke) before 9.1.1 has Remote Code Execution via a cookie, aka "2017-08 (Critical) Possible remote code execution on DNN sites."

Improper Control of Generation of Code ('Code Injection') vulnerability in TienCOP WP EXtra.This issue affects WP EXtra: from n/a through 6.2.

In XWiki Platform 7.2 through 11.10.2, registered users without scripting/programming permissions are able to execute python/groovy scripts while editing personal dashboards. This has been fixed 11.3.7 , 11.10.3 and 12.0.

Pi-hole's Web interface provides a central location to manage a Pi-hole instance and review performance statistics. Prior to Pi-hole Web interface version 5.5.1, the `validDomainWildcard` preg_match filter allows a malicious character through that can be used to execute code, list directories, and overwrite sensitive files. The issue lies in the fact that one of the periods is not escaped, allowing any character to be used in its place. A patch for this vulnerability was released in version 5.5.1.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. In affected versions it's possible for a user to execute any content with the right of an existing document's content author, provided the user have edit right on it. A crafted URL of the form ` /xwiki/bin/edit//?content=%7B%7Bgroovy%7D%7Dprintln%28%22Hello+from+Groovy%21%22%29%7B%7B%2Fgroovy%7D%7D&xpage=view` can be used to execute arbitrary groovy code on the server. This vulnerability has been patched in XWiki versions 14.10.6 and 15.2RC1. Users are advised to update. There are no known workarounds for this issue.

An issue in ThingNario Photon v.1.0 allows a remote attacker to execute arbitrary code and escalate privileges via a crafted script to the ping function to the "thingnario Logger Maintenance Webpage" endpoint.

An issue was discovered in Titan SpamTitan 7.07. Improper sanitization of the parameter jaction when interacting with the page mailqueue.php could lead to PHP code evaluation server-side, because the user-provided input is passed directly to the php eval() function. The user has to be authenticated on the web platform before interacting with the page.

Zulip Server 2.x before 2.1.7 allows eval injection if a privileged attacker were able to write directly to the postgres database, and chose to write a crafted custom profile field value.

In Jenkins Templating Engine Plugin 2.5.3 and earlier, libraries defined in folders are not subject to sandbox protection, allowing attackers with Item/Configure permission to execute arbitrary code in the context of the Jenkins controller JVM.

An authenticated attacker can achieve stored XSS by exploiting improper sanitization of the plant name value while adding or editing a plant.

An issue in HummerRisk HummerRisk v.1.10 thru 1.4.1 allows an authenticated attacker to execute arbitrary code via a crafted request to the service/LicenseService component.

On Phoenix Contact PLCnext Control Devices versions before 2021.0 LTS an authenticated low privileged user could embed malicious Javascript code to gain admin rights when the admin user visits the vulnerable website (local privilege escalation).