In the Linux kernel, the following vulnerability has been resolved: libfs: fix get_stashed_dentry() get_stashed_dentry() tries to optimistically retrieve a stashed dentry from a provided location. It needs to ensure to hold rcu lock before it dereference the stashed location to prevent UAF issues. Use rcu_dereference() instead of READ_ONCE() it's effectively equivalent with some lockdep bells and whistles and it communicates clearly that this expects rcu protection.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: reset mmio mappings with devm Set our various mmio mappings to NULL. This should make it easier to catch something rogue trying to mess with mmio after device removal. For example, we might unmap everything and then start hitting some mmio address which has already been unmamped by us and then remapped by something else, causing all kinds of carnage.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix firmware crash due to invalid peer nss Currently, if the access point receives an association request containing an Extended HE Capabilities Information Element with an invalid MCS-NSS, it triggers a firmware crash. This issue arises when EHT-PHY capabilities shows support for a bandwidth and MCS-NSS set for that particular bandwidth is filled by zeros and due to this, driver obtains peer_nss as 0 and sending this value to firmware causes crash. Address this issue by implementing a validation step for the peer_nss value before passing it to the firmware. If the value is greater than zero, proceed with forwarding it to the firmware. However, if the value is invalid, reject the association request to prevent potential firmware crashes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check debug trap enable before write dbg_ev_file In interrupt context, write dbg_ev_file will be run by work queue. It will cause write dbg_ev_file execution after debug_trap_disable, which will cause NULL pointer access. v2: cancel work "debug_event_workarea" before set dbg_ev_file as NULL.

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info() Instead of doing a BUG_ON() handle the error by returning -EUCLEAN, aborting the transaction and logging an error message.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Remove SCSI host only if added If host tries to remove ufshcd driver from a UFS device it would cause a kernel panic if ufshcd_async_scan fails during ufshcd_probe_hba before adding a SCSI host with scsi_add_host and MCQ is enabled since SCSI host has been defered after MCQ configuration introduced by commit 0cab4023ec7b ("scsi: ufs: core: Defer adding host to SCSI if MCQ is supported"). To guarantee that SCSI host is removed only if it has been added, set the scsi_host_added flag to true after adding a SCSI host and check whether it is set or not before removing it.

In the Linux kernel, the following vulnerability has been resolved: bpf: Remove tst_run from lwt_seg6local_prog_ops. The syzbot reported that the lwt_seg6 related BPF ops can be invoked via bpf_test_run() without without entering input_action_end_bpf() first. Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL probably didn't work since it was introduced in commit 04d4b274e2a ("ipv6: sr: Add seg6local action End.BPF"). The reason is that the per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self test case but each BPF function expects it. Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add missing NULL pointer check within dpcd_extend_address_range [Why & How] ASSERT if return NULL from kcalloc.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix prime with external buffers Make sure that for external buffers mapping goes through the dma_buf interface instead of trying to access pages directly. External buffers might not provide direct access to readable/writable pages so to make sure the bo's created from external dma_bufs can be read dma_buf interface has to be used. Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't trigger this due to the fact that virtual machines will not have multiple GPUs but it enables better test coverage in IGT.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com

In the Linux kernel, the following vulnerability has been resolved: arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry In a review discussion of the changes to support vCPU hotplug where a check was added on the GICC being enabled if was online, it was noted that there is need to map back to the cpu and use that to index into a cpumask. As such, a valid ID is needed. If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible for the entry in cpu_madt_gicc[cpu] == NULL. This function would then cause a NULL pointer dereference. Whilst a path to trigger this has not been established, harden this caller against the possibility.

In the Linux kernel, the following vulnerability has been resolved: spi: rockchip: Resolve unbalanced runtime PM / system PM handling Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and simply disabled clocks unconditionally when suspending the system. This causes problems when the device is already runtime suspended when we go to sleep -- in which case we double-disable clocks and produce a WARNing. Switch back to pm_runtime_force_{suspend,resume}(), because that still seems like the right thing to do, and the aforementioned commit makes no explanation why it stopped using it. Also, refactor some of the resume() error handling, because it's not actually a good idea to re-disable clocks on failure.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix missing cleanup on rollforward recovery error In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't access invalid sched Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") accessing job->base.sched can produce unexpected results as the initialisation of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the memset. This commit fixes an issue when a CS would fail validation and would be rejected after job->num_ibs is incremented. In this case, amdgpu_ib_free(ring->adev, ...) will be called, which would crash the machine because the ring value is bogus. To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this because the device is actually not used in this function. The next commit will remove the ring argument completely. (cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7)

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: Check if fully initialized before signalling HPD event via IRQ Make sure the connector is fully initialized before signalling any HPD events via drm_kms_helper_hotplug_event(), otherwise this may lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: nfsd: ensure that nfsd4_fattr_args.context is zeroed out If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to checking for the security label, then args.context will be set to uninitialized junk on the stack, which we'll then try to free. Initialize it early.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference in pcs_get_function() pinmux_generic_get_function() can return NULL and the pointer 'function' was dereferenced without checking against NULL. Add checking of pointer 'function' in pcs_get_function(). Found by code review.

In the Linux kernel, the following vulnerability has been resolved: driver: iio: add missing checks on iio_info's callback access Some callbacks from iio_info structure are accessed without any check, so if a driver doesn't implement them trying to access the corresponding sysfs entries produce a kernel oops such as: [ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute [...] [ 2203.783416] Call trace: [ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48 [ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120 [ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4 [ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0 [ 2203.802236] vfs_read from ksys_read+0xa4/0xd4 [ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54 [ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0) [ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000 [ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000 [ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0 [ 2203.830363] Code: bad PC value [ 2203.832695] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: Revert "serial: 8250_omap: Set the console genpd always on if no console suspend" This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940. Kevin reported that this causes a crash during suspend on platforms that dont use PM domains.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception.

An issue was discovered in the Linux kernel through 5.16-rc6. ef100_update_stats in drivers/net/ethernet/sfc/ef100_nic.c lacks check of the return value of kmalloc().

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: schedule rx work after everything is set up Right now it's possible to hit NULL pointer dereference in rtw_rx_fill_rx_status on hw object and/or its fields because initialization routine can start getting USB replies before rtw_dev is fully setup. The stack trace looks like this: rtw_rx_fill_rx_status rtw8821c_query_rx_desc rtw_usb_rx_handler ... queue_work rtw_usb_read_port_complete ... usb_submit_urb rtw_usb_rx_resubmit rtw_usb_init_rx rtw_usb_probe So while we do the async stuff rtw_usb_probe continues and calls rtw_register_hw, which does all kinds of initialization (e.g. via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on. Fix this by moving the first usb_submit_urb after everything is set up. For me, this bug manifested as: [ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped [ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status because I'm using Larry's backport of rtw88 driver with the NULL checks in rtw_rx_fill_rx_status.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: Allocate memory for driver private data Fix driver not allocating memory for struct btintel_data which is used to store internal data.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.

In the Linux kernel, the following vulnerability has been resolved: pktgen: use cpus_read_lock() in pg_net_init() I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix bridge mode operations when there are no VFs Currently, trying to set the bridge mode attribute when numvfs=0 leads to a crash: bridge link set dev eth2 hwmode vepa [ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] [ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core] [...] [ 168.976037] Call Trace: [ 168.976188] <TASK> [ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core] [ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core] [ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0 [ 168.979714] rtnetlink_rcv_msg+0x159/0x400 [ 168.980451] netlink_rcv_skb+0x54/0x100 [ 168.980675] netlink_unicast+0x241/0x360 [ 168.980918] netlink_sendmsg+0x1f6/0x430 [ 168.981162] ____sys_sendmsg+0x3bb/0x3f0 [ 168.982155] ___sys_sendmsg+0x88/0xd0 [ 168.985036] __sys_sendmsg+0x59/0xa0 [ 168.985477] do_syscall_64+0x79/0x150 [ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 168.987773] RIP: 0033:0x7f8f7950f917 (esw->fdb_table.legacy.vepa_fdb is null) The bridge mode is only relevant when there are multiple functions per port. Therefore, prevent setting and getting this setting when there are no VFs. Note that after this change, there are no settings to change on the PF interface using `bridge link` when there are no VFs, so the interface no longer appears in the `bridge link` output.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Restrict high priorities on group_create We were allowing any users to create a high priority group without any permission checks. As a result, this was allowing possible denial of service. We now only allow the DRM master or users with the CAP_SYS_NICE capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM. As the sole user of that uAPI lives in Mesa and hardcode a value of MEDIUM [1], this should be safe to do. Additionally, as those checks are performed at the ioctl level, panthor_group_create now only check for priority level validity. [1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038

In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset the binding mark of a reused connection Steve French reported null pointer dereference error from sha256 lib. cifs.ko can send session setup requests on reused connection. If reused connection is used for binding session, conn->binding can still remain true and generate_preauth_hash() will not set sess->Preauth_HashValue and it will be NULL. It is used as a material to create an encryption key in ksmbd_gen_smb311_encryptionkey. ->Preauth_HashValue cause null pointer dereference error from crypto_shash_update(). BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 8 PID: 429254 Comm: kworker/8:39 Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET69W (1.52 ) Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] RIP: 0010:lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? do_user_addr_fault+0x2ee/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] _sha256_update+0x77/0xa0 [sha256_ssse3] sha256_avx2_update+0x15/0x30 [sha256_ssse3] crypto_shash_update+0x1e/0x40 hmac_update+0x12/0x20 crypto_shash_update+0x1e/0x40 generate_key+0x234/0x380 [ksmbd] generate_smb3encryptionkey+0x40/0x1c0 [ksmbd] ksmbd_gen_smb311_encryptionkey+0x72/0xa0 [ksmbd] ntlm_authenticate.isra.0+0x423/0x5d0 [ksmbd] smb2_sess_setup+0x952/0xaa0 [ksmbd] __process_request+0xa3/0x1d0 [ksmbd] __handle_ksmbd_work+0x1c4/0x2f0 [ksmbd] handle_ksmbd_work+0x2d/0xa0 [ksmbd] process_one_work+0x16c/0x350 worker_thread+0x306/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xef/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x44/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id() mwifiex_get_priv_by_id() returns the priv pointer corresponding to the bss_num and bss_type, but without checking if the priv is actually currently in use. Unused priv pointers do not have a wiphy attached to them which can lead to NULL pointer dereferences further down the callstack. Fix this by returning only used priv pointers which have priv->bss_mode set to something else than NL80211_IFTYPE_UNSPECIFIED. Said NULL pointer dereference happened when an Accesspoint was started with wpa_supplicant -i mlan0 with this config: network={ ssid="somessid" mode=2 frequency=2412 key_mgmt=WPA-PSK WPA-PSK-SHA256 proto=RSN group=CCMP pairwise=CCMP psk="12345678" } When waiting for the AP to be established, interrupting wpa_supplicant with <ctrl-c> and starting it again this happens: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000 | [0000000000000140] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio +mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs +imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6 | CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18 | Hardware name: somemachine (DT) | Workqueue: events sdio_irq_work | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex] | lr : mwifiex_get_cfp+0x34/0x15c [mwifiex] | sp : ffff8000818b3a70 | x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004 | x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9 | x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000 | x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000 | x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517 | x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1 | x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157 | x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124 | x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000 | Call trace: | mwifiex_get_cfp+0xd8/0x15c [mwifiex] | mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex] | mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex] | mwifiex_process_sta_event+0x298/0xf0c [mwifiex] | mwifiex_process_event+0x110/0x238 [mwifiex] | mwifiex_main_process+0x428/0xa44 [mwifiex] | mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio] | process_sdio_pending_irqs+0x64/0x1b8 | sdio_irq_work+0x4c/0x7c | process_one_work+0x148/0x2a0 | worker_thread+0x2fc/0x40c | kthread+0x110/0x114 | ret_from_fork+0x10/0x20 | Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000) | ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed This avoids warning: [ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 Caused by get_c0_compare_int on secondary CPU. We also skipped saving IRQ number to struct clock_event_device *cd as it's never used by clockevent core, as per comments it's only meant for "non CPU local devices".

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix RX buf alloc_size alignment and atomic op panic The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0

In the Linux kernel, the following vulnerability has been resolved: sched/smt: Fix unbalance sched_smt_present dec/inc I got the following warn report while doing stress test: jump label: negative count! WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0 Call Trace: <TASK> __static_key_slow_dec_cpuslocked+0x16/0x70 sched_cpu_deactivate+0x26e/0x2a0 cpuhp_invoke_callback+0x3ad/0x10d0 cpuhp_thread_fun+0x3f5/0x680 smpboot_thread_fn+0x56d/0x8d0 kthread+0x309/0x400 ret_from_fork+0x41/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(), the cpu offline failed, but sched_smt_present is decremented before calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so fix it by incrementing sched_smt_present in the error path.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix missing workqueue destroy in xe_gt_pagefault On driver reload we never free up the memory for the pagefault and access counter workqueues. Add those destroy calls here. (cherry picked from commit 7586fc52b14e0b8edd0d1f8a434e0de2078b7b2b)

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup() If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop up the damage. If it fails early enough, before xhci->interrupters is allocated but after xhci->max_interrupters has been set, which happens in most (all?) cases, things get uglier, as xhci_mem_cleanup() unconditionally derefences xhci->interrupters. With prejudice. Gate the interrupt freeing loop with a check on xhci->interrupters being non-NULL. Found while debugging a DMA allocation issue that led the XHCI driver on this exact path.

In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid possible physmem_info segment corruption When physical memory for the kernel image is allocated it does not consider extra memory required for offsetting the image start to match it with the lower 20 bits of KASLR virtual base address. That might lead to kernel access beyond its memory range.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix null ptr deref in dtInsertEntry [syzbot reported] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713 ... [Analyze] In dtInsertEntry(), when the pointer h has the same value as p, after writing name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the previously true judgment "p->header.flag & BT-LEAF" to change to no after writing the name operation, this leads to entering an incorrect branch and accessing the uninitialized object ih when judging this condition for the second time. [Fix] After got the page, check freelist first, if freelist == 0 then exit dtInsert() and return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix overflow in __rb_map_vma An overflow occurred when performing the following calculation: nr_pages = ((nr_subbufs + 1) << subbuf_order) - pgoff; Add a check before the calculation to avoid this problem. syzbot reported this as a slab-out-of-bounds in __rb_map_vma: BUG: KASAN: slab-out-of-bounds in __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058 Read of size 8 at addr ffff8880767dd2b8 by task syz-executor187/5836 CPU: 0 UID: 0 PID: 5836 Comm: syz-executor187 Not tainted 6.13.0-rc2-syzkaller-00159-gf932fb9b4074 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xc3/0x620 mm/kasan/report.c:489 kasan_report+0xd9/0x110 mm/kasan/report.c:602 __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058 ring_buffer_map+0x56e/0x9b0 kernel/trace/ring_buffer.c:7138 tracing_buffers_mmap+0xa6/0x120 kernel/trace/trace.c:8482 call_mmap include/linux/fs.h:2183 [inline] mmap_file mm/internal.h:124 [inline] __mmap_new_file_vma mm/vma.c:2291 [inline] __mmap_new_vma mm/vma.c:2355 [inline] __mmap_region+0x1786/0x2670 mm/vma.c:2456 mmap_region+0x127/0x320 mm/mmap.c:1348 do_mmap+0xc00/0xfc0 mm/mmap.c:496 vm_mmap_pgoff+0x1ba/0x360 mm/util.c:580 ksys_mmap_pgoff+0x32c/0x5c0 mm/mmap.c:542 __do_sys_mmap arch/x86/kernel/sys_x86_64.c:89 [inline] __se_sys_mmap arch/x86/kernel/sys_x86_64.c:82 [inline] __x64_sys_mmap+0x125/0x190 arch/x86/kernel/sys_x86_64.c:82 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reproducer for this bug is: ------------------------8<------------------------- #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <asm/types.h> #include <sys/mman.h> int main(int argc, char **argv) { int page_size = getpagesize(); int fd; void *meta; system("echo 1 > /sys/kernel/tracing/buffer_size_kb"); fd = open("/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw", O_RDONLY); meta = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, page_size * 5); } ------------------------>8-------------------------

arch/x86/kvm/vmx.c in the KVM subsystem in the Linux kernel before 3.17.2 on Intel processors does not ensure that the value in the CR4 control register remains the same after a VM entry, which allows host OS users to kill arbitrary processes or cause a denial of service (system disruption) by leveraging /dev/kvm access, as demonstrated by PR_SET_TSC prctl calls within a modified copy of QEMU.

In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane).

In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it.

In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS.

In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_test: Fix NULL dereference on allocation failure If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success.

In the Linux kernel, the following vulnerability has been resolved: mm, slub: do not call do_slab_free for kfence object In 782f8906f805 the freeing of kfence objects was moved from deep inside do_slab_free to the wrapper functions outside. This is a nice change, but unfortunately it missed one spot in __kmem_cache_free_bulk. This results in a crash like this: BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840 slab_err (mm/slub.c:1129) free_to_partial_list (mm/slub.c:? mm/slub.c:4036) slab_pad_check (mm/slub.c:864 mm/slub.c:1290) check_slab (mm/slub.c:?) free_to_partial_list (mm/slub.c:3171 mm/slub.c:4036) kmem_cache_alloc_bulk (mm/slub.c:? mm/slub.c:4495 mm/slub.c:4586 mm/slub.c:4635) napi_build_skb (net/core/skbuff.c:348 net/core/skbuff.c:527 net/core/skbuff.c:549) All the other callers to do_slab_free appear to be ok. Add a kfence_free check in __kmem_cache_free_bulk to avoid the crash.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Fix out-of-bound access If an ATU violation was caused by a CPU Load operation, the SPID could be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array).

A use-after-free vulnerability was found in the siano smsusb module in the Linux kernel. The bug occurs during device initialization when the siano device is plugged in. This flaw allows a local user to crash the system, causing a denial of service condition.

In the Linux kernel, the following vulnerability has been resolved: i2c: cadence: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in functions cdns_i2c_master_xfer and cdns_reg_slave. However, pm_runtime_get_sync will increment pm usage counter even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.