In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: Add check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: tls: stop recv() if initial process_rx_list gave us non-DATA If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work.

In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before truncation in jfs_truncate_nolock() Added a check for "read-only" mode in the `jfs_truncate_nolock` function to avoid errors related to writing to a read-only filesystem. Call stack: block_write_begin() { jfs_write_failed() { jfs_truncate() { jfs_truncate_nolock() { txEnd() { ... log = JFS_SBI(tblk->sb)->log; // (log == NULL) If the `isReadOnly(ip)` condition is triggered in `jfs_truncate_nolock`, the function execution will stop, and no further data modification will occur. Instead, the `xtTruncate` function will be called with the "COMMIT_WMAP" flag, preventing modifications in "read-only" mode.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: handle a symlink read error correctly Patch series "Convert ocfs2 to use folios". Mark did a conversion of ocfs2 to use folios and sent it to me as a giant patch for review ;-) So I've redone it as individual patches, and credited Mark for the patches where his code is substantially the same. It's not a bad way to do it; his patch had some bugs and my patches had some bugs. Hopefully all our bugs were different from each other. And hopefully Mark likes all the changes I made to his code! This patch (of 23): If we can't read the buffer, be sure to unlock the page before returning.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-mpmu: Fix a NULL vs IS_ERR() check The devm_kzalloc() function returns NULL on error, not error pointers. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Add shadow buffering for deferred I/O DMA areas are not necessarily backed by struct page, so we cannot rely on it for deferred I/O. Allocate a shadow buffer for drivers that require deferred I/O and use it as framebuffer memory. Fixes driver errors about being "Unable to handle kernel NULL pointer dereference at virtual address" or "Unable to handle kernel paging request at virtual address". The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial allocation, which creates the DMA-backed buffer object, and a tail that sets up the fbdev data structures. There is a tail function for direct memory mappings and a tail function for deferred I/O with the shadow buffer. It is no longer possible to use deferred I/O without shadow buffer. It can be re-added if there exists a reliably test for usable struct page in the allocated DMA-backed buffer object.

In the Linux kernel, the following vulnerability has been resolved: mailbox: th1520: Fix a NULL vs IS_ERR() bug The devm_ioremap() function doesn't return error pointers, it returns NULL. Update the error checking to match.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp2: call pm_genpd_init() only after genpd.name is set Setting the genpd's struct device's name with dev_set_name() is happening within pm_genpd_init(). If it remains NULL, things can blow up later, such as when crafting the devfs hierarchy for the power domain: Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read ... Call trace: strlen from start_creating+0x90/0x138 start_creating from debugfs_create_dir+0x20/0x178 debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144 genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90 genpd_debug_init from do_one_initcall+0x5c/0x244 do_one_initcall from kernel_init_freeable+0x19c/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28 Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name with dev_name(&genpd->dev) in genpd_debug_add.part().

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prohibit deactivating all links In the internal API this calls this is a WARN_ON, but that should remain since internally we want to know about bugs that may cause this. Prevent deactivating all links in the debugfs write directly.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Disable works on hci_unregister_dev This make use of disable_work_* on hci_unregister_dev since the hci_dev is about to be freed new submissions are not disarable.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: dispcc-sm6350: Add missing parent_map for a clock If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for the clock where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together.

In the Linux kernel, the following vulnerability has been resolved: io_uring: prevent reg-wait speculations With *ENTER_EXT_ARG_REG instead of passing a user pointer with arguments for the waiting loop the user can specify an offset into a pre-mapped region of memory, in which case the [offset, offset + sizeof(io_uring_reg_wait)) will be intepreted as the argument. As we address a kernel array using a user given index, it'd be a subject to speculation type of exploits. Use array_index_nospec() to prevent that. Make sure to pass not the full region size but truncate by the maximum offset allowed considering the structure size.

In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix integer overflow bug on 32 bit systems Most of these sizes and counts are capped at 256MB so the math doesn't result in an integer overflow. The "relocs" count needs to be checked as well. Otherwise on 32bit systems the calculation of "full_data" could be wrong. full_data = data_len + relocs * sizeof(unsigned long);

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: tests: Fix potential NULL dereference in test_cfg80211_parse_colocated_ap() kunit_kzalloc() may return NULL, dereferencing it without NULL check may lead to NULL dereference. Add a NULL check for ies.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock during uvc_probe If uvc_probe() fails, it can end up calling uvc_status_unregister() before uvc_status_init() is called. Fix this by checking if dev->status is NULL or not in uvc_status_unregister().

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-apbcp: Fix a NULL vs IS_ERR() check The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix RCU stall while reaping monitor destination ring While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-dai: Ensure DAI widget is valid during params Each cpu DAI should associate with a widget. However, the topology might not create the right number of DAI widgets for aggregated amps. And it will cause NULL pointer deference. Check that the DAI widget associated with the CPU DAI is valid to prevent NULL pointer deference due to missing DAI widgets in topologies with aggregated amps.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix improper sg use with CONFIG_VMAP_STACK=y With vmalloc stack addresses enabled (CONFIG_VMAP_STACK=y) DCP trusted keys can crash during en- and decryption of the blob encryption key via the DCP crypto driver. This is caused by improperly using sg_init_one() with vmalloc'd stack buffers (plain_key_blob). Fix this by always using kmalloc() for buffers we give to the DCP crypto driver.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix TCP options overflow. Syzbot reported the following splat: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline] RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552 Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83 RSP: 0000:ffffc90003916c90 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007 R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_page_unref include/linux/skbuff_ref.h:43 [inline] __skb_frag_unref include/linux/skbuff_ref.h:56 [inline] skb_release_data+0x483/0x8a0 net/core/skbuff.c:1119 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb+0x55/0x70 net/core/skbuff.c:1204 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3436 [inline] tcp_ack+0x2442/0x6bc0 net/ipv4/tcp_input.c:4032 tcp_rcv_state_process+0x8eb/0x44e0 net/ipv4/tcp_input.c:6805 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5672 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5785 process_backlog+0x662/0x15b0 net/core/dev.c:6117 __napi_poll+0xcb/0x490 net/core/dev.c:6883 napi_poll net/core/dev.c:6952 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:7074 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x57/0xc0 arch/x86/kernel/apic/apic.c:1049 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0033:0x7f34f4519ad5 Code: 85 d2 74 0d 0f 10 02 48 8d 54 24 20 0f 11 44 24 20 64 8b 04 25 18 00 00 00 85 c0 75 27 41 b8 08 00 00 00 b8 0f 01 00 00 0f 05 <48> 3d 00 f0 ff ff 76 75 48 8b 15 24 73 0d 00 f7 d8 64 89 02 48 83 RSP: 002b:00007ffec5b32ce0 EFLAGS: 00000246 RAX: 0000000000000001 RBX: 00000000000668a0 RCX: 00007f34f4519ad5 RDX: 00007ffec5b32d00 RSI: 0000000000000004 RDI: 0000564f4bc6cae0 RBP: 0000564f4bc6b5a0 R08: 0000000000000008 R09: 0000000000000000 R10: 00007ffec5b32de8 R11: 0000000000000246 R12: 0000564f48ea8aa4 R13: 0000000000000001 R14: 0000564f48ea93e8 R15: 00007ffec5b32d68 </TASK> Eric noted a probable shinfo->nr_frags corruption, which indeed occurs. The root cause is a buggy MPTCP option len computation in some circumstances: the ADD_ADDR option should be mutually exclusive with DSS since the blamed commit. Still, mptcp_established_options_add_addr() tries to set the relevant info in mptcp_out_options, if ---truncated---

In the Linux kernel, the following vulnerability has been resolved: gve: guard XSK operations on the existence of queues This patch predicates the enabling and disabling of XSK pools on the existence of queues. As it stands, if the interface is down, disabling or enabling XSK pools would result in a crash, as the RX queue pointer would be NULL. XSK pool registration will occur as part of the next interface up. Similarly, xsk_wakeup needs be guarded against queues disappearing while the function is executing, so a check against the GVE_PRIV_FLAGS_NAPI_ENABLED flag is added to synchronize with the disabling of the bit and the synchronize_net() in gve_turndown.

In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Cleanup global '__scm' on probe failures If SCM driver fails the probe, it should not leave global '__scm' variable assigned, because external users of this driver will assume the probe finished successfully. For example TZMEM parts ('__scm->mempool') are initialized later in the probe, but users of it (__scm_smc_call()) rely on the '__scm' variable. This fixes theoretical NULL pointer exception, triggered via introducing probe deferral in SCM driver with call trace: qcom_tzmem_alloc+0x70/0x1ac (P) qcom_tzmem_alloc+0x64/0x1ac (L) qcom_scm_assign_mem+0x78/0x194 qcom_rmtfs_mem_probe+0x2d4/0x38c platform_probe+0x68/0xc8

In the Linux kernel, the following vulnerability has been resolved: btrfs: check folio mapping after unlock in relocate_one_folio() When we call btrfs_read_folio() to bring a folio uptodate, we unlock the folio. The result of that is that a different thread can modify the mapping (like remove it with invalidate) before we call folio_lock(). This results in an invalid page and we need to try again. In particular, if we are relocating concurrently with aborting a transaction, this can result in a crash like the following: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 76 PID: 1411631 Comm: kworker/u322:5 Workqueue: events_unbound btrfs_reclaim_bgs_work RIP: 0010:set_page_extent_mapped+0x20/0xb0 RSP: 0018:ffffc900516a7be8 EFLAGS: 00010246 RAX: ffffea009e851d08 RBX: ffffea009e0b1880 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc900516a7b90 RDI: ffffea009e0b1880 RBP: 0000000003573000 R08: 0000000000000001 R09: ffff88c07fd2f3f0 R10: 0000000000000000 R11: 0000194754b575be R12: 0000000003572000 R13: 0000000003572fff R14: 0000000000100cca R15: 0000000005582fff FS: 0000000000000000(0000) GS:ffff88c07fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000407d00f002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die+0x78/0xc0 ? page_fault_oops+0x2a8/0x3a0 ? __switch_to+0x133/0x530 ? wq_worker_running+0xa/0x40 ? exc_page_fault+0x63/0x130 ? asm_exc_page_fault+0x22/0x30 ? set_page_extent_mapped+0x20/0xb0 relocate_file_extent_cluster+0x1a7/0x940 relocate_data_extent+0xaf/0x120 relocate_block_group+0x20f/0x480 btrfs_relocate_block_group+0x152/0x320 btrfs_relocate_chunk+0x3d/0x120 btrfs_reclaim_bgs_work+0x2ae/0x4e0 process_scheduled_works+0x184/0x370 worker_thread+0xc6/0x3e0 ? blk_add_timer+0xb0/0xb0 kthread+0xae/0xe0 ? flush_tlb_kernel_range+0x90/0x90 ret_from_fork+0x2f/0x40 ? flush_tlb_kernel_range+0x90/0x90 ret_from_fork_asm+0x11/0x20 </TASK> This occurs because cleanup_one_transaction() calls destroy_delalloc_inodes() which calls invalidate_inode_pages2() which takes the folio_lock before setting mapping to NULL. We fail to check this, and subsequently call set_extent_mapping(), which assumes that mapping != NULL (in fact it asserts that in debug mode) Note that the "fixes" patch here is not the one that introduced the race (the very first iteration of this code from 2009) but a more recent change that made this particular crash happen in practice.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix f2fs_bug_on when uninstalling filesystem call f2fs_evict_inode. creating a large files during checkpoint disable until it runs out of space and then delete it, then remount to enable checkpoint again, and then unmount the filesystem triggers the f2fs_bug_on as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inode.c:896! CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty #360 Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:f2fs_evict_inode+0x58c/0x610 Call Trace: __die_body+0x15/0x60 die+0x33/0x50 do_trap+0x10a/0x120 f2fs_evict_inode+0x58c/0x610 do_error_trap+0x60/0x80 f2fs_evict_inode+0x58c/0x610 exc_invalid_op+0x53/0x60 f2fs_evict_inode+0x58c/0x610 asm_exc_invalid_op+0x16/0x20 f2fs_evict_inode+0x58c/0x610 evict+0x101/0x260 dispose_list+0x30/0x50 evict_inodes+0x140/0x190 generic_shutdown_super+0x2f/0x150 kill_block_super+0x11/0x40 kill_f2fs_super+0x7d/0x140 deactivate_locked_super+0x2a/0x70 cleanup_mnt+0xb3/0x140 task_work_run+0x61/0x90 The root cause is: creating large files during disable checkpoint period results in not enough free segments, so when writing back root inode will failed in f2fs_enable_checkpoint. When umount the file system after enabling checkpoint, the root inode is dirty in f2fs_evict_inode function, which triggers BUG_ON. The steps to reproduce are as follows: dd if=/dev/zero of=f2fs.img bs=1M count=55 mount f2fs.img f2fs_dir -o checkpoint=disable:10% dd if=/dev/zero of=big bs=1M count=50 sync rm big mount -o remount,checkpoint=enable f2fs_dir umount f2fs_dir Let's redirty inode when there is not free segments during checkpoint is disable.

In the Linux kernel, the following vulnerability has been resolved: Revert "libfs: fix infinite directory reads for offset dir" The current directory offset allocator (based on mtree_alloc_cyclic) stores the next offset value to return in octx->next_offset. This mechanism typically returns values that increase monotonically over time. Eventually, though, the newly allocated offset value wraps back to a low number (say, 2) which is smaller than other already- allocated offset values. Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir"), if a directory's offset allocator wraps, existing entries are no longer visible via readdir/getdents because offset_readdir() stops listing entries once an entry's offset is larger than octx->next_offset. These entries vanish persistently -- they can be looked up, but will never again appear in readdir(3) output. The reason for this is that the commit treats directory offsets as monotonically increasing integer values rather than opaque cookies, and introduces this comparison: if (dentry2offset(dentry) >= last_index) { On 64-bit platforms, the directory offset value upper bound is 2^63 - 1. Directory offsets will monotonically increase for millions of years without wrapping. On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator can wrap after only a few weeks (at worst). Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir") to prepare for a fix that can work properly on 32-bit systems and might apply to recent LTS kernels where shmem employs the simple_offset mechanism.

In the Linux kernel, the following vulnerability has been resolved: net: Fix icmp host relookup triggering ip_rt_bug arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: <IRQ> ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_direct_read_write() The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails. There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently).

In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix warning in migrate_enable for boosted tasks When running the following command: while true; do stress-ng --cyclic 30 --timeout 30s --minimize --quiet done a warning is eventually triggered: WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794 setup_new_dl_entity+0x13e/0x180 ... Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? enqueue_dl_entity+0x631/0x6e0 ? setup_new_dl_entity+0x13e/0x180 ? __warn+0x7e/0xd0 ? report_bug+0x11a/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 enqueue_dl_entity+0x631/0x6e0 enqueue_task_dl+0x7d/0x120 __do_set_cpus_allowed+0xe3/0x280 __set_cpus_allowed_ptr_locked+0x140/0x1d0 __set_cpus_allowed_ptr+0x54/0xa0 migrate_enable+0x7e/0x150 rt_spin_unlock+0x1c/0x90 group_send_sig_info+0xf7/0x1a0 ? kill_pid_info+0x1f/0x1d0 kill_pid_info+0x78/0x1d0 kill_proc_info+0x5b/0x110 __x64_sys_kill+0x93/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f0dab31f92b This warning occurs because set_cpus_allowed dequeues and enqueues tasks with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning is triggered. A boosted task already had its parameters set by rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary, hence the WARN_ON call. Check if we are requeueing a boosted task and avoid calling setup_new_dl_entity if that's the case.

In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: unregister wiphy only if it has been registered There is a specific error path in probe functions in wilc drivers (both sdio and spi) which can lead to kernel panic, as this one for example when using SPI: Unable to handle kernel paging request at virtual address 9f000000 when read [9f000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22 Hardware name: Atmel SAMA5 PC is at wiphy_unregister+0x244/0xc40 [cfg80211] LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211] [...] wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000] wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi] wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4 spi_probe from really_probe+0x270/0xb2c really_probe from __driver_probe_device+0x1dc/0x4e8 __driver_probe_device from driver_probe_device+0x5c/0x140 driver_probe_device from __driver_attach+0x220/0x540 __driver_attach from bus_for_each_dev+0x13c/0x1a8 bus_for_each_dev from bus_add_driver+0x2a0/0x6a4 bus_add_driver from driver_register+0x27c/0x51c driver_register from do_one_initcall+0xf8/0x564 do_one_initcall from do_init_module+0x2e4/0x82c do_init_module from load_module+0x59a0/0x70c4 load_module from init_module_from_file+0x100/0x148 init_module_from_file from sys_finit_module+0x2fc/0x924 sys_finit_module from ret_fast_syscall+0x0/0x1c The issue can easily be reproduced, for example by not wiring correctly a wilc device through SPI (and so, make it unresponsive to early SPI commands). It is due to a recent change decoupling wiphy allocation from wiphy registration, however wilc_netdev_cleanup has not been updated accordingly, letting it possibly call wiphy unregister on a wiphy which has never been registered. Fix this crash by moving wiphy_unregister/wiphy_free out of wilc_netdev_cleanup, and by adjusting error paths in both drivers

In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: independent PMD page table shared count The folio refcount may be increased unexpectly through try_get_folio() by caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount to check whether a pmd page table is shared. The check is incorrect if the refcount is increased by the above caller, and this can cause the page table leaked: BUG: Bad page state in process sh pfn:109324 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324 flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff) page_type: f2(table) raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000 raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000 page dumped because: nonzero mapcount ... CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7 Tainted: [B]=BAD_PAGE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 dump_stack+0x18/0x28 bad_page+0x8c/0x130 free_page_is_bad_report+0xa4/0xb0 free_unref_page+0x3cc/0x620 __folio_put+0xf4/0x158 split_huge_pages_all+0x1e0/0x3e8 split_huge_pages_write+0x25c/0x2d8 full_proxy_write+0x64/0xd8 vfs_write+0xcc/0x280 ksys_write+0x70/0x110 __arm64_sys_write+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0x128 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x190/0x198 The issue may be triggered by damon, offline_page, page_idle, etc, which will increase the refcount of page table. 1. The page table itself will be discarded after reporting the "nonzero mapcount". 2. The HugeTLB page mapped by the page table miss freeing since we treat the page table as shared and a shared page table will not be unmapped. Fix it by introducing independent PMD page table shared count. As described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390 gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv pmds, so we can reuse the field as pt_share_count.

In the Linux kernel, the following vulnerability has been resolved: slab: Fix too strict alignment check in create_cache() On m68k, where the minimum alignment of unsigned long is 2 bytes: Kernel panic - not syncing: __kmem_cache_create_args: Failed to create slab 'io_kiocb'. Error -22 CPU: 0 UID: 0 PID: 1 Comm: swapper Not tainted 6.12.0-atari-03776-g7eaa1f99261a #1783 Stack from 0102fe5c: 0102fe5c 00514a2b 00514a2b ffffff00 00000001 0051f5ed 00425e78 00514a2b 0041eb74 ffffffea 00000310 0051f5ed ffffffea ffffffea 00601f60 00000044 0102ff20 000e7a68 0051ab8e 004383b8 0051f5ed ffffffea 000000b8 00000007 01020c00 00000000 000e77f0 0041e5f0 005f67c0 0051f5ed 000000b6 0102fef4 00000310 0102fef4 00000000 00000016 005f676c 0060a34c 00000010 00000004 00000038 0000009a 01000000 000000b8 005f668e 0102e000 00001372 0102ff88 Call Trace: [<00425e78>] dump_stack+0xc/0x10 [<0041eb74>] panic+0xd8/0x26c [<000e7a68>] __kmem_cache_create_args+0x278/0x2e8 [<000e77f0>] __kmem_cache_create_args+0x0/0x2e8 [<0041e5f0>] memset+0x0/0x8c [<005f67c0>] io_uring_init+0x54/0xd2 The minimal alignment of an integral type may differ from its size, hence is not safe to assume that an arbitrary freeptr_t (which is basically an unsigned long) is always aligned to 4 or 8 bytes. As nothing seems to require the additional alignment, it is safe to fix this by relaxing the check to the actual minimum alignment of freeptr_t.

In the Linux kernel, the following vulnerability has been resolved: gpio: grgpio: Add NULL check in grgpio_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in grgpio_probe is not checked. Add NULL check in grgpio_probe, to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' If platform_get_resource_byname() fails and returns NULL because DT lacks an 'mmio' property for the MHI endpoint, dereferencing res->start will cause a NULL pointer access. Add a check to prevent it. [kwilczynski: error message update per the review feedback] [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: ad7780: fix division by zero in ad7780_write_raw() In the ad7780_write_raw() , val2 can be zero, which might lead to a division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw() is based on iio_info's write_raw. While val is explicitly declared that can be zero (in read mode), val2 is not specified to be non-zero.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add check for granularity in dml ceil/floor helpers [Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec)

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.c Add error pointer check after calling otx2_mbox_get_rsp().

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity() The following call-chain leads to enabling interrupts in a nested interrupt disabled section: irq_set_vcpu_affinity() irq_get_desc_lock() raw_spin_lock_irqsave() <--- Disable interrupts its_irq_set_vcpu_affinity() guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard() irq_put_desc_unlock() <--- Warns because interrupts are enabled This was broken in commit b97e8a2f7130, which replaced the original raw_spin_[un]lock() pair with guard(raw_spinlock_irq). Fix the issue by using guard(raw_spinlock). [ tglx: Massaged change log ]

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add cond_resched() for no forced preemption model For no forced preemption model kernel, in the scenario where the expander is connected to 12 high performance SAS SSDs, the following call trace may occur: [ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211] [ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 214.575224][ C240] pc : fput_many+0x8c/0xdc [ 214.579480][ C240] lr : fput+0x1c/0xf0 [ 214.583302][ C240] sp : ffff80002de2b900 [ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000 [ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000 [ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000 [ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001 [ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000 [ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000 [ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0 [ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff [ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c [ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0 [ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001 [ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080 [ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554 [ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020 [ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8 [ 214.677191][ C240] Call trace: [ 214.680320][ C240] fput_many+0x8c/0xdc [ 214.684230][ C240] fput+0x1c/0xf0 [ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc [ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140 [ 214.696917][ C240] bio_endio+0x160/0x1bc [ 214.701001][ C240] blk_update_request+0x1c8/0x3bc [ 214.705867][ C240] scsi_end_request+0x3c/0x1f0 [ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0 [ 214.715249][ C240] scsi_finish_command+0x104/0x140 [ 214.720200][ C240] scsi_softirq_done+0x90/0x180 [ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70 [ 214.730016][ C240] scsi_mq_done+0x48/0xac [ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas] [ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw] [ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw] [ 214.752179][ C240] irq_thread_fn+0x34/0xa4 [ 214.756435][ C240] irq_thread+0xc4/0x130 [ 214.760520][ C240] kthread+0x108/0x13c [ 214.764430][ C240] ret_from_fork+0x10/0x18 This is because in the hisi_sas driver, both the hardware interrupt handler and the interrupt thread are executed on the same CPU. In the performance test scenario, function irq_wait_for_interrupt() will always return 0 if lots of interrupts occurs and the CPU will be continuously consumed. As a result, the CPU cannot run the watchdog thread. When the watchdog time exceeds the specified time, call trace occurs. To fix it, add cond_resched() to execute the watchdog thread.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction atomicity bug when enabling simple quotas Set squota incompat bit before committing the transaction that enables the feature. With the config CONFIG_BTRFS_ASSERT enabled, an assertion failure occurs regarding the simple quota feature. [5.596534] assertion failed: btrfs_fs_incompat(fs_info, SIMPLE_QUOTA), in fs/btrfs/qgroup.c:365 [5.597098] ------------[ cut here ]------------ [5.597371] kernel BUG at fs/btrfs/qgroup.c:365! [5.597946] CPU: 1 UID: 0 PID: 268 Comm: mount Not tainted 6.13.0-rc2-00031-gf92f4749861b #146 [5.598450] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [5.599008] RIP: 0010:btrfs_read_qgroup_config+0x74d/0x7a0 [5.604303] <TASK> [5.605230] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.605538] ? exc_invalid_op+0x56/0x70 [5.605775] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606066] ? asm_exc_invalid_op+0x1f/0x30 [5.606441] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606741] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.607038] ? try_to_wake_up+0x317/0x760 [5.607286] open_ctree+0xd9c/0x1710 [5.607509] btrfs_get_tree+0x58a/0x7e0 [5.608002] vfs_get_tree+0x2e/0x100 [5.608224] fc_mount+0x16/0x60 [5.608420] btrfs_get_tree+0x2f8/0x7e0 [5.608897] vfs_get_tree+0x2e/0x100 [5.609121] path_mount+0x4c8/0xbc0 [5.609538] __x64_sys_mount+0x10d/0x150 The issue can be easily reproduced using the following reproducer: root@q:linux# cat repro.sh set -e mkfs.btrfs -q -f /dev/sdb mount /dev/sdb /mnt/btrfs btrfs quota enable -s /mnt/btrfs umount /mnt/btrfs mount /dev/sdb /mnt/btrfs The issue is that when enabling quotas, at btrfs_quota_enable(), we set BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE at fs_info->qgroup_flags and persist it in the quota root in the item with the key BTRFS_QGROUP_STATUS_KEY, but we only set the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA after we commit the transaction used to enable simple quotas. This means that if after that transaction commit we unmount the filesystem without starting and committing any other transaction, or we have a power failure, the next time we mount the filesystem we will find the flag BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE set in the item with the key BTRFS_QGROUP_STATUS_KEY but we will not find the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA set in the superblock, triggering an assertion failure at: btrfs_read_qgroup_config() -> qgroup_read_enable_gen() To fix this issue, set the BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA flag immediately after setting the BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE. This ensures that both flags are flushed to disk within the same transaction.

In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb

In the Linux kernel, the following vulnerability has been resolved: bpf: fix recursive lock when verdict program return SK_PASS When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix looping of queued SG entries The dwc3_request->num_queued_sgs is decremented on completion. If a partially completed request is handled, then the dwc3_request->num_queued_sgs no longer reflects the total number of num_queued_sgs (it would be cleared). Correctly check the number of request SG entries remained to be prepare and queued. Failure to do this may cause null pointer dereference when accessing non-existent SG entry.

In the Linux kernel, the following vulnerability has been resolved: media: amphion: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops.

In the Linux kernel, the following vulnerability has been resolved: gve: guard XDP xmit NDO on existence of xdp queues In GVE, dedicated XDP queues only exist when an XDP program is installed and the interface is up. As such, the NDO XDP XMIT callback should return early if either of these conditions are false. In the case of no loaded XDP program, priv->num_xdp_queues=0 which can cause a divide-by-zero error, and in the case of interface down, num_xdp_queues remains untouched to persist XDP queue count for the next interface up, but the TX pointer itself would be NULL. The XDP xmit callback also needs to synchronize with a device transitioning from open to close. This synchronization will happen via the GVE_PRIV_FLAGS_NAPI_ENABLED bit along with a synchronize_net() call, which waits for any RCU critical sections at call-time to complete.

In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Prevent integer overflow issue In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32 values that come from the user so the multiplication can lead to integer wrapping. Then we pass the result to uverbs_request_next_ptr() which also could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)" multiplication can also overflow on 32bit systems although it's fine on 64bit systems. This patch does two things. First, I've re-arranged the condition in uverbs_request_next_ptr() so that the use controlled variable "len" is on one side of the comparison by itself without any math. Then I've modified all the callers to use size_mul() for the multiplications.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix the memleak while create new ctrl failed Now while we create new ctrl failed, we have not free the tagset occupied by admin_q, here try to fix it.

In the Linux kernel, the following vulnerability has been resolved: PCI/MSI: Handle lack of irqdomain gracefully Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support: WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32 __pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2 RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub. That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP. Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over. Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: Add space for a terminator into DAIs array The code uses the initialised member of the asoc_sdw_dailink struct to determine if a member of the array is in use. However in the case the array is completely full this will lead to an access 1 past the end of the array, expand the array by one entry to include a space for a terminator.