A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids() Mounting btrfs from two images (which have the same one fsid and two different dev_uuids) in certain executing order may trigger an UAF for variable 'device->bdev_file' in __btrfs_free_extra_devids(). And following are the details: 1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs devices by ioctl(BTRFS_IOC_SCAN_DEV): / btrfs_device_1 → loop0 fs_device \ btrfs_device_2 → loop1 2. mount /dev/loop0 /mnt btrfs_open_devices btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0) btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree fail: btrfs_close_devices // -ENOMEM btrfs_close_bdev(btrfs_device_1) fput(btrfs_device_1->bdev_file) // btrfs_device_1->bdev_file is freed btrfs_close_bdev(btrfs_device_2) fput(btrfs_device_2->bdev_file) 3. mount /dev/loop1 /mnt btrfs_open_devices btrfs_get_bdev_and_sb(&bdev_file) // EIO, btrfs_device_1->bdev_file is not assigned, // which points to a freed memory area btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree btrfs_free_extra_devids if (btrfs_device_1->bdev_file) fput(btrfs_device_1->bdev_file) // UAF ! Fix it by setting 'device->bdev_file' as 'NULL' after closing the btrfs_device in btrfs_close_one_device().

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink: Initialise extack before use in ACKs Add missing extack initialisation when ACKing BATCH_BEGIN and BATCH_END.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Free job before xe_exec_queue_put Free job depends on job->vm being valid, the last xe_exec_queue_put can destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put. (cherry picked from commit 32a42c93b74c8ca6d0915ea3eba21bceff53042f)

In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leaks and crashes while performing a soft reset The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled.

A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func() 'new_map' is allocated using devm_* which takes care of freeing the allocated data on device removal, call to .dt_free_map = pinconf_generic_dt_free_map double frees the map as pinconf_generic_dt_free_map() calls pinctrl_utils_free_map(). Fix this by using kcalloc() instead of auto-managed devm_kcalloc().

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix user-after-free from session log off There is racy issue between smb2 session log off and smb2 session setup. It will cause user-after-free from session log off. This add session_lock when setting SMB2_SESSION_EXPIRED and referece count to session struct not to free session while it is being used.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437

In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent tail call between progs attached to different hooks bpf progs can be attached to kernel functions, and the attached functions can take different parameters or return different return values. If prog attached to one kernel function tail calls prog attached to another kernel function, the ctx access or return value verification could be bypassed. For example, if prog1 is attached to func1 which takes only 1 parameter and prog2 is attached to func2 which takes two parameters. Since verifier assumes the bpf ctx passed to prog2 is constructed based on func2's prototype, verifier allows prog2 to access the second parameter from the bpf ctx passed to it. The problem is that verifier does not prevent prog1 from passing its bpf ctx to prog2 via tail call. In this case, the bpf ctx passed to prog2 is constructed from func1 instead of func2, that is, the assumption for ctx access verification is bypassed. Another example, if BPF LSM prog1 is attached to hook file_alloc_security, and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier knows the return value rules for these two hooks, e.g. it is legal for bpf_lsm_audit_rule_known to return positive number 1, and it is illegal for file_alloc_security to return positive number. So verifier allows prog2 to return positive number 1, but does not allow prog1 to return positive number. The problem is that verifier does not prevent prog1 from calling prog2 via tail call. In this case, prog2's return value 1 will be used as the return value for prog1's hook file_alloc_security. That is, the return value rule is bypassed. This patch adds restriction for tail call to prevent such bypasses.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Validate TA binary size Add TA binary size validation to avoid OOB write. (cherry picked from commit c0a04e3570d72aaf090962156ad085e37c62e442)

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow Syzkaller reported this splat: ================================================================== BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/ke ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in ip6_finish_output2() If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix race between laundromat and free_stateid There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely.

In the Linux kernel, the following vulnerability has been resolved: parisc: fix a possible DMA corruption ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be possible that two unrelated 16-byte allocations share a cache line. If one of these allocations is written using DMA and the other is written using cached write, the value that was written with DMA may be corrupted. This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 - that's the largest possible cache line size. As different parisc microarchitectures have different cache line size, we define arch_slab_minalign(), cache_line_size() and dma_get_cache_alignment() so that the kernel may tune slab cache parameters dynamically, based on the detected cache line size.

A vulnerability classified as critical has been found in Linux Kernel. This affects the function spl2sw_nvmem_get_mac_address of the file drivers/net/ethernet/sunplus/spl2sw_driver.c of the component BPF. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211041 was assigned to this vulnerability.

A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.

In the Linux kernel, the following vulnerability has been resolved: tracing: Consider the NULL character when validating the event length strlen() returns a string length excluding the null byte. If the string length equals to the maximum buffer length, the buffer will have no space for the NULL terminating character. This commit checks this condition and returns failure for it.

In the Linux kernel, the following vulnerability has been resolved: atm: idt77252: prevent use after free in dequeue_rx() We can't dereference "skb" after calling vcc->push() because the skb is released.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read() Avoid a possible buffer overflow if size is larger than 4K. (cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434)

In the Linux kernel, the following vulnerability has been resolved: drm/mgag200: Bind I2C lifetime to DRM device Managed cleanup with devm_add_action_or_reset() will release the I2C adapter when the underlying Linux device goes away. But the connector still refers to it, so this cleanup leaves behind a stale pointer in struct drm_connector.ddc. Bind the lifetime of the I2C adapter to the connector's lifetime by using DRM's managed release. When the DRM device goes away (after the Linux device) DRM will first clean up the connector and then clean up the I2C adapter.

In the Linux kernel, the following vulnerability has been resolved: net: sched: use RCU read-side critical section in taprio_dump() Fix possible use-after-free in 'taprio_dump()' by adding RCU read-side critical section there. Never seen on x86 but found on a KASAN-enabled arm64 system when investigating https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa: [T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0 [T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862 [T15862] [T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty #2 [T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024 [T15862] Call trace: [T15862] dump_backtrace+0x20c/0x220 [T15862] show_stack+0x2c/0x40 [T15862] dump_stack_lvl+0xf8/0x174 [T15862] print_report+0x170/0x4d8 [T15862] kasan_report+0xb8/0x1d4 [T15862] __asan_report_load4_noabort+0x20/0x2c [T15862] taprio_dump+0xa0c/0xbb0 [T15862] tc_fill_qdisc+0x540/0x1020 [T15862] qdisc_notify.isra.0+0x330/0x3a0 [T15862] tc_modify_qdisc+0x7b8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Allocated by task 15857: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_alloc_info+0x40/0x60 [T15862] __kasan_kmalloc+0xd4/0xe0 [T15862] __kmalloc_cache_noprof+0x194/0x334 [T15862] taprio_change+0x45c/0x2fe0 [T15862] tc_modify_qdisc+0x6a8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Freed by task 6192: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_free_info+0x4c/0x80 [T15862] poison_slab_object+0x110/0x160 [T15862] __kasan_slab_free+0x3c/0x74 [T15862] kfree+0x134/0x3c0 [T15862] taprio_free_sched_cb+0x18c/0x220 [T15862] rcu_core+0x920/0x1b7c [T15862] rcu_core_si+0x10/0x1c [T15862] handle_softirqs+0x2e8/0xd64 [T15862] __do_softirq+0x14/0x20

The arcmsr_iop_message_xfer function in drivers/scsi/arcmsr/arcmsr_hba.c in the Linux kernel through 4.8.2 does not restrict a certain length field, which allows local users to gain privileges or cause a denial of service (heap-based buffer overflow) via an ARCMSR_MESSAGE_WRITE_WQBUFFER control code.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Vangogh: Fix kernel memory out of bounds write KASAN reports that the GPU metrics table allocated in vangogh_tables_init() is not large enough for the memset done in smu_cmn_init_soft_gpu_metrics(). Condensed report follows: [ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu] [ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067 ... [ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544 [ 33.861816] Tainted: [W]=WARN [ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023 [ 33.861822] Call Trace: [ 33.861826] <TASK> [ 33.861829] dump_stack_lvl+0x66/0x90 [ 33.861838] print_report+0xce/0x620 [ 33.861853] kasan_report+0xda/0x110 [ 33.862794] kasan_check_range+0xfd/0x1a0 [ 33.862799] __asan_memset+0x23/0x40 [ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.867135] dev_attr_show+0x43/0xc0 [ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0 [ 33.867155] seq_read_iter+0x3f8/0x1140 [ 33.867173] vfs_read+0x76c/0xc50 [ 33.867198] ksys_read+0xfb/0x1d0 [ 33.867214] do_syscall_64+0x90/0x160 ... [ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s: [ 33.867358] kasan_save_stack+0x33/0x50 [ 33.867364] kasan_save_track+0x17/0x60 [ 33.867367] __kasan_kmalloc+0x87/0x90 [ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu] [ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu] [ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu] [ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu] [ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu] [ 33.869608] local_pci_probe+0xda/0x180 [ 33.869614] pci_device_probe+0x43f/0x6b0 Empirically we can confirm that the former allocates 152 bytes for the table, while the latter memsets the 168 large block. Root cause appears that when GPU metrics tables for v2_4 parts were added it was not considered to enlarge the table to fit. The fix in this patch is rather "brute force" and perhaps later should be done in a smarter way, by extracting and consolidating the part version to size logic to a common helper, instead of brute forcing the largest possible allocation. Nevertheless, for now this works and fixes the out of bounds write. v2: * Drop impossible v3_0 case. (Mario) (cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703)

The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges.

An out-of-bounds memory write flaw was found in the Linux kernel’s Kid-friendly Wired Controller driver. This flaw allows a local user to crash or potentially escalate their privileges on the system. It is in bigben_probe of drivers/hid/hid-bigbenff.c. The reason is incorrect assumption - bigben devices all have inputs. However, malicious devices can break this assumption, leaking to out-of-bound write.

In the Linux kernel, the following vulnerability has been resolved: vduse: fix memory corruption in vduse_dev_ioctl() The "config.offset" comes from the user. There needs to a check to prevent it being out of bounds. The "config.offset" and "dev->config_size" variables are both type u32. So if the offset if out of bounds then the "dev->config_size - config.offset" subtraction results in a very high u32 value. The out of bounds offset can result in memory corruption.

The start_thread function in arch/powerpc/kernel/process.c in the Linux kernel through 4.6.3 on powerpc platforms mishandles transactional state, which allows local users to cause a denial of service (invalid process state or TM Bad Thing exception, and system crash) or possibly have unspecified other impact by starting and suspending a transaction before an exec system call.

In the Linux kernel, the following vulnerability has been resolved: idpf: avoid vport access in idpf_get_link_ksettings When the device control plane is removed or the platform running device control plane is rebooted, a reset is detected on the driver. On driver reset, it releases the resources and waits for the reset to complete. If the reset fails, it takes the error path and releases the vport lock. At this time if the monitoring tools tries to access link settings, it call traces for accessing released vport pointer. To avoid it, move link_speed_mbps to netdev_priv structure which removes the dependency on vport pointer and the vport lock in idpf_get_link_ksettings. Also use netif_carrier_ok() to check the link status and adjust the offsetof to use link_up instead of link_speed_mbps.

The apparmor_setprocattr function in security/apparmor/lsm.c in the Linux kernel before 4.6.5 does not validate the buffer size, which allows local users to gain privileges by triggering an AppArmor setprocattr hook.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix timer use-after-free on failed mount Syzbot has found an ODEBUG bug in ext4_fill_super The del_timer_sync function cancels the s_err_report timer, which reminds about filesystem errors daily. We should guarantee the timer is no longer active before kfree(sbi). When filesystem mounting fails, the flow goes to failed_mount3, where an error occurs when ext4_stop_mmpd is called, causing a read I/O failure. This triggers the ext4_handle_error function that ultimately re-arms the timer, leaving the s_err_report timer active before kfree(sbi) is called. Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd.

The msm_ipc_router_close function in net/ipc_router/ipc_router_socket.c in the ipc_router component for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allow attackers to cause a denial of service (NULL pointer dereference) or possibly have unspecified other impact by triggering failure of an accept system call for an AF_MSM_IPC socket.

Multiple heap-based buffer overflows in the hiddev_ioctl_usage function in drivers/hid/usbhid/hiddev.c in the Linux kernel through 4.6.3 allow local users to cause a denial of service or possibly have unspecified other impact via a crafted (1) HIDIOCGUSAGES or (2) HIDIOCSUSAGES ioctl call.

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix use-after-free in jffs2_clear_xattr_subsystem When we mount a jffs2 image, assume that the first few blocks of the image are normal and contain at least one xattr-related inode, but the next block is abnormal. As a result, an error is returned in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then called in jffs2_build_filesystem() and then again in jffs2_do_fill_super(). Finally we can observe the following report: ================================================================== BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac Read of size 8 at addr ffff8881243384e0 by task mount/719 Call Trace: dump_stack+0x115/0x16b jffs2_clear_xattr_subsystem+0x95/0x6ac jffs2_do_fill_super+0x84f/0xc30 jffs2_fill_super+0x2ea/0x4c0 mtd_get_sb+0x254/0x400 mtd_get_sb_by_nr+0x4f/0xd0 get_tree_mtd+0x498/0x840 jffs2_get_tree+0x25/0x30 vfs_get_tree+0x8d/0x2e0 path_mount+0x50f/0x1e50 do_mount+0x107/0x130 __se_sys_mount+0x1c5/0x2f0 __x64_sys_mount+0xc7/0x160 do_syscall_64+0x45/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 719: kasan_save_stack+0x23/0x60 __kasan_kmalloc.constprop.0+0x10b/0x120 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x1c0/0x870 jffs2_alloc_xattr_ref+0x2f/0xa0 jffs2_scan_medium.cold+0x3713/0x4794 jffs2_do_mount_fs.cold+0xa7/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] Freed by task 719: kmem_cache_free+0xcc/0x7b0 jffs2_free_xattr_ref+0x78/0x98 jffs2_clear_xattr_subsystem+0xa1/0x6ac jffs2_do_mount_fs.cold+0x5e6/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] The buggy address belongs to the object at ffff8881243384b8 which belongs to the cache jffs2_xattr_ref of size 48 The buggy address is located 40 bytes inside of 48-byte region [ffff8881243384b8, ffff8881243384e8) [...] ================================================================== The triggering of the BUG is shown in the following stack: ----------------------------------------------------------- jffs2_fill_super jffs2_do_fill_super jffs2_do_mount_fs jffs2_build_filesystem jffs2_scan_medium jffs2_scan_eraseblock <--- ERROR jffs2_clear_xattr_subsystem <--- free jffs2_clear_xattr_subsystem <--- free again ----------------------------------------------------------- An error is returned in jffs2_do_mount_fs(). If the error is returned by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to be executed. If the error is returned by jffs2_build_filesystem(), the jffs2_clear_xattr_subsystem() also does not need to be executed again. So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root' to fix this UAF problem.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] r ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter() In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Fix invalid error returning in mhi_queue mhi_queue returns an error when the doorbell is not accessible in the current state. This can happen when the device is in non M0 state, like M3, and needs to be waken-up prior ringing the DB. This case is managed earlier by triggering an asynchronous M3 exit via controller resume/suspend callbacks, that in turn will cause M0 transition and DB update. So, since it's not an error but just delaying of doorbell update, there is no reason to return an error. This also fixes a use after free error for skb case, indeed a caller queuing skb will try to free the skb if the queueing fails, but in that case queueing has been done.

In the Linux kernel, the following vulnerability has been resolved: md/raid1: properly indicate failure when ending a failed write request This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume.

In the Linux kernel, the following vulnerability has been resolved: sctp: do asoc update earlier in sctp_sf_do_dupcook_a There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this.

In the Linux kernel, the following vulnerability has been resolved: ionic: fix use after netif_napi_del() When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: drm/xe/tracing: Fix a potential TP_printk UAF The commit afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format") exposes potential UAFs in the xe_bo_move trace event. Fix those by avoiding dereferencing the xe_mem_type_to_name[] array at TP_printk time. Since some code refactoring has taken place, explicit backporting may be needed for kernels older than 6.10.

Use-after-free vulnerability in drivers/net/ppp/ppp_generic.c in the Linux kernel before 4.5.2 allows local users to cause a denial of service (memory corruption and system crash, or spinlock) or possibly have unspecified other impact by removing a network namespace, related to the ppp_register_net_channel and ppp_unregister_channel functions.

"IBM InfoSphere Information Server 11.7 could allow a locally authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-"Force ID: 231361.

In the Linux kernel, the following vulnerability has been resolved: dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails When loading a device-mapper table for a request-based mapped device, and the allocation/initialization of the blk_mq_tag_set for the device fails, a following device remove will cause a double free. E.g. (dmesg): device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device device-mapper: ioctl: unable to set up device queue for new table. Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0305e098835de000 TEID: 0305e098835de803 Fault in home space mode while using kernel ASCE. AS:000000025efe0007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... lots of modules ... Supported: Yes, External CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3 Hardware name: IBM 8561 T01 7I2 (LPAR) Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000 000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000 000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640 00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8 Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8 000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58 #000000025e368ec4: e3b010000008 ag %r11,0(%r1) >000000025e368eca: e310b0080004 lg %r1,8(%r11) 000000025e368ed0: a7110001 tmll %r1,1 000000025e368ed4: a7740129 brc 7,25e369126 000000025e368ed8: e320b0080004 lg %r2,8(%r11) 000000025e368ede: b904001b lgr %r1,%r11 Call Trace: [<000000025e368eca>] kfree+0x42/0x330 [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8 [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod] [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod] [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod] [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod] [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod] [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod] [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0 [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40 [<000000025e8c15ac>] system_call+0xd8/0x2c8 Last Breaking-Event-Address: [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops When allocation/initialization of the blk_mq_tag_set fails in dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer is not reset to NULL; so when dev_remove() later gets into dm_mq_cleanup_mapped_device() it sees the pointer and tries to uninitialize and free it again. Fix this by setting the pointer to NULL in dm_mq_init_request_queue() error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().

In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: always initialize seqpacket_allow There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features

Heap-based buffer overflow in the wcnss_wlan_write function in drivers/net/wireless/wcnss/wcnss_wlan.c in the wcnss_wlan device driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service or possibly have unspecified other impact by writing to /dev/wcnss_wlan with an unexpected amount of data.