When dragging and dropping an image cross-origin, the image's size could potentially be leaked. This behavior was shipped in 109 and caused web compatibility problems as well as this security concern, so the behavior was disabled until further review. This vulnerability affects Firefox < 110.

Keyboard events reference strings like "KeyA" that were at fixed, known, and widely-spread addresses. Cache-based timing attacks such as Prime+Probe could have possibly figured out which keys were being pressed. This vulnerability affects Firefox ESR < 102.5, Thunderbird < 102.5, and Firefox < 107.

Service Workers should not be able to infer information about opaque cross-origin responses; but timing information for cross-origin media combined with Range requests might have allowed them to determine the presence or length of a media file. This vulnerability affects Firefox ESR < 102.5, Thunderbird < 102.5, and Firefox < 107.

An attacker could have exploited a timing attack by sending a large number of allowCredential entries and detecting the difference between invalid key handles and cross-origin key handles. This could have led to cross-origin account linking in violation of WebAuthn goals. This vulnerability affects Thunderbird < 91.10, Firefox < 101, and Firefox ESR < 91.10.

The MediaError message property should be consistent to avoid leaking information about cross-origin resources; however for a same-site cross-origin resource, the message could have leaked information enabling XS-Leaks attacks. This vulnerability affects Firefox < 102.

NSS has shown timing differences when performing DSA signatures, which was exploitable and could eventually leak private keys. This vulnerability affects Thunderbird < 68.9.0, Firefox < 77, and Firefox ESR < 68.9.

The Raccoon attack is a timing attack on DHE ciphersuites inherit in the TLS specification. To mitigate this vulnerability, Firefox disabled support for DHE ciphersuites.

During ECDSA signature generation, padding applied in the nonce designed to ensure constant-time scalar multiplication was removed, resulting in variable-time execution dependent on secret data. This vulnerability affects Firefox < 80 and Firefox for Android < 80.

During RSA key generation, bignum implementations used a variation of the Binary Extended Euclidean Algorithm which entailed significantly input-dependent flow. This allowed an attacker able to perform electromagnetic-based side channel attacks to record traces leading to the recovery of the secret primes. *Note:* An unmodified Firefox browser does not generate RSA keys in normal operation and is not affected, but products built on top of it might. This vulnerability affects Firefox < 78.

If hyperthreading is not disabled, a timing attack vulnerability exists, similar to previous Spectre attacks. Apple has shipped macOS 10.14.5 with an option to disable hyperthreading in applications running untrusted code in a thread through a new sysctl. Firefox now makes use of it on the main thread and any worker threads. *Note: users need to update to macOS 10.14.5 in order to take advantage of this change.*. This vulnerability affects Thunderbird < 60.7, Firefox < 67, and Firefox ESR < 60.7.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the identification of the correct tenant for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

In Cibele Thinfinity VirtualUI before 3.0, /changePassword returns different responses for invalid authentication requests depending on whether the username exists.

UrBackup Server 2.5.31 allows brute-force enumeration of user accounts because a failure message confirms that a username is not valid.

Observable discrepancies in the login process allow an attacker to guess legitimate user names registered in the BMC. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Thinfinity VirtualUI before 3.0 allows a malicious actor to enumerate users registered in the OS (Windows) through the /changePassword URI. By accessing the vector, an attacker can determine if a username exists thanks to the message returned; it can be presented in different languages according to the configuration of VirtualUI. Common users are administrator, admin, guest and krgtbt.

Crypto++ (aka Cryptopp) 8.6.0 and earlier contains a timing leakage in MakePublicKey(). There is a clear correlation between execution time and private key length, which may cause disclosure of the length information of the private key. This might allow attackers to conduct timing attacks. NOTE: this report is disputed by the vendor and multiple third parties. The execution-time differences are intentional. A user may make a choice of a longer key as a tradeoff between strength and performance. In making this choice, the amount of information leaked to an adversary is of infinitesimal value

An issue was discovered in Django v5.1.1, v5.0.9, and v4.2.16. The django.contrib.auth.forms.PasswordResetForm class, when used in a view implementing password reset flows, allows remote attackers to enumerate user e-mail addresses by sending password reset requests and observing the outcome (only when e-mail sending is consistently failing).

A user enumeration vulnerability in MELAG FTP Server 2.2.0.4 allows an attacker to identify valid FTP usernames.

A user enumeration vulnerability flaw was found in Venki Supravizio BPM 10.1.2. This issue occurs during password recovery, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

webcalendar before 1.2.7 shows the reason for a failed login (e.g., "no such user").

The password-reset form in ServiceNow Orlando provides different responses to invalid authentication attempts depending on whether the username exists.

Loway - CWE-204: Observable Response Discrepancy

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

Inappropriate implementation in Background Fetch API in Google Chrome prior to 94.0.4606.54 allowed a remote attacker to leak cross-origin data via a crafted HTML page.

In the Twilio Authy API, accessed by Authy Android before 25.1.0 and Authy iOS before 26.1.0, an unauthenticated endpoint provided access to certain phone-number data, as exploited in the wild in June 2024. Specifically, the endpoint accepted a stream of requests containing phone numbers, and responded with information about whether each phone number was registered with Authy. (Authy accounts were not compromised, however.)

Accounts enumeration vulnerability in the Login Component of Reolink Duo 2 WiFi Camera (Firmware Version v3.0.0.1889_23031701) allows remote attackers to determine valid user accounts via login attempts. This can lead to the enumeration of user accounts and potentially facilitate other attacks, such as brute-forcing of passwords. The vulnerability arises from the application responding differently to login attempts with valid and invalid usernames.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

An observable response discrepancy vulnerability [CWE-204] in FortiClientEMS 7.4.0, 7.2.0 through 7.2.4, 7.0 all versions, and FortiSOAR 7.5.0, 7.4.0 through 7.4.4, 7.3.0 through 7.3.2, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow an unauthenticated attacker to enumerate valid users via observing login request responses.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the password recovery procedure for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

Observable behavioral discrepancy vulnerability in QSAN Storage Manager allows remote attackers to obtain the system information without permissions. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

User enumeration vulnerability in ORDAT FOSS-Online before v2.24.01 allows attackers to determine if an account exists in the application by comparing the server responses of the forgot password functionality.

IBM Security Identity Manager 7.0.2 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 200018

Flask-AppBuilder is a development framework, built on top of Flask. User enumeration in database authentication in Flask-AppBuilder <= 3.2.3. Allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Upgrade to version 3.3.0 or higher to resolve.

IBM i 7.2, 7.3, 7.4, and 7.5 Service Tools Server (SST) is vulnerable to SST user enumeration by a remote attacker. This vulnerability can be used by a malicious actor to gather information about SST users that can be targeted in further attacks. IBM X-Force ID: 287538.

In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

In Logpoint before 7.4.0, an attacker can enumerate a valid list of usernames by using publicly exposed URLs of shared widgets.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

An user enumeration vulnerability was found in SEO Panel 4.10.0. This issue occurs during user authentication, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

A vulnerability has been identified in Mendix Forgot Password (Mendix 10 compatible) (All versions < V5.4.0), Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.3), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.3), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.4.0). Applications using the affected module are vulnerable to user enumeration due to distinguishable responses. This could allow an unauthenticated remote attacker to determine if a user is valid or not, enabling a brute force attack with valid users.

Fides is an open-source privacy engineering platform. Prior to version 2.44.0, a timing-based username enumeration vulnerability exists in Fides Webserver authentication. This vulnerability allows an unauthenticated attacker to determine the existence of valid usernames by analyzing the time it takes for the server to respond to login requests. The discrepancy in response times between valid and invalid usernames can be leveraged to enumerate users on the system. This vulnerability enables a timing-based username enumeration attack. An attacker can systematically guess and verify which usernames are valid by measuring the server's response time to authentication requests. This information can be used to conduct further attacks on authentication such as password brute-forcing and credential stuffing. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds.

LabVantage LIMS 8.3 does not properly maintain the confidentiality of database names. For example, the web application exposes the database name. An attacker might be able to enumerate database names by providing his own database name in a request, because the response will return an 'Unrecognized Database exception message if the database does not exist.

Piccolo is an ORM and query builder which supports asyncio. In versions 0.120.0 and prior, the implementation of `BaseUser.login` leaks enough information to a malicious user such that they would be able to successfully generate a list of valid users on the platform. As Piccolo on its own does not also enforce strong passwords, these lists of valid accounts are likely to be used in a password spray attack with the outcome being attempted takeover of user accounts on the platform. The impact of this vulnerability is minor as it requires chaining with other attack vectors in order to gain more then simply a list of valid users on the underlying platform. The likelihood of this vulnerability is possible as it requires minimal skills to pull off, especially given the underlying login functionality for Piccolo based sites is open source. This issue has been patched in version 0.121.0.

IBM TXSeries for Multiplatforms 10.1 could allow an attacker to determine valid usernames due to an observable timing discrepancy which could be used in further attacks against the system.

Side-channel information leakage in scroll to text in Google Chrome prior to 84.0.4147.89 allowed a remote attacker to leak cross-origin data via a crafted HTML page.