The Cisco Linksys WVC54GC wireless video camera before firmware 1.25 sends cleartext configuration data in response to a Setup Wizard remote-management command, which allows remote attackers to obtain sensitive information such as passwords by sniffing the network.

IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in environment variables which could aid in further attacks against the system. IBM X-Force ID: 260736.

IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in container images which could lead to further attacks against the system. IBM X-Force ID: 260730.

The device uses an unencrypted, proprietary protocol for communication. Through this protocol, configuration data is transmitted and device authentication is performed. An attacker can thereby intercept the authentication hash and use it to log into the device using a pass-the-hash attack.

ASUS RT-AC66U B1 3.0.0.4.286_51665 was discovered to transmit sensitive information in cleartext.

Joomla! 1.5.8 does not set the secure flag for the session cookie in an https session, which makes it easier for remote attackers to capture this cookie by intercepting its transmission within an http session.

A vulnerability was found in Intergard SGS 8.7.0. It has been declared as problematic. This vulnerability affects unknown code of the component SQL Query Handler. The manipulation leads to cleartext transmission of sensitive information. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-234448. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION7700/73xx, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts Telnet network traffic between a user and the device.

A vulnerability was found in Intergard SGS 8.7.0 and classified as problematic. Affected by this issue is some unknown functionality of the component Password Change Handler. The manipulation leads to cleartext transmission of sensitive information. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. VDB-234446 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts HTTP network traffic between a user and the device.

Insertion of Sensitive Information Into Sent Data vulnerability in NotFound WPDB to Sql allows Retrieve Embedded Sensitive Data. This issue affects WPDB to Sql: from n/a through 1.2.

In KeePass 2.x before 2.54, it is possible to recover the cleartext master password from a memory dump, even when a workspace is locked or no longer running. The memory dump can be a KeePass process dump, swap file (pagefile.sys), hibernation file (hiberfil.sys), or RAM dump of the entire system. The first character cannot be recovered. In 2.54, there is different API usage and/or random string insertion for mitigation.

OpenProject is web-based project management software. For any OpenProject installation, a `robots.txt` file is generated through the server to denote which routes shall or shall not be accessed by crawlers. These routes contain project identifiers of all public projects in the instance. Prior to version 12.5.6, even if the entire instance is marked as `Login required` and prevents all truly anonymous access, the `/robots.txt` route remains publicly available. Version 12.5.6 has a fix for this issue. Alternatively, users can download a patchfile to apply the patch to any OpenProject version greater than 10.0 As a workaround, one may mark any public project as non-public and give anyone in need of access to the project a membership.

Insertion of Sensitive Information Into Sent Data vulnerability in NotFound WM Options Import Export allows Retrieve Embedded Sensitive Data. This issue affects WM Options Import Export: from n/a through 1.0.1.

Web Based Quiz System v1.0 transmits user passwords in plaintext during the authentication process, allowing attackers to obtain users' passwords via a bruteforce attack.

Wrongthink peer-to-peer, end-to-end encrypted messenger with PeerJS and Axolotl ratchet. In wrongthink from version 2.0.0 and before 2.3.0 there was a set of vulnerabilities causing inadequate encryption strength. Part of the secret identity key was disclosed by the fingerprint used for connection. Additionally, the safety number was improperly calculated. It was computed using part of one of the public identity keys instead of being derived from both public identity keys. This caused issues in computing safety numbers which would potentially be exploitable in the real world. Additionally there was inadequate encryption strength due to use of 1024-bit DSA keys. These issues are all fixed in version 2.3.0.

Insertion of Sensitive Information Into Sent Data vulnerability in brandtoss WP Mailster allows Retrieve Embedded Sensitive Data.This issue affects WP Mailster: from n/a through 1.8.17.0.

In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.

Cleartext Transmission of Sensitive InformationCleartext transmission of sensitive information vulnerability in MELSEC iQ-R series Safety CPU R08/16/32/120SFCPU firmware versions "26" and prior and MELSEC iQ-R series SIL2 Process CPU R08/16/32/120PSFCPU firmware versions "11" and prior allows a remote unauthenticated attacker to login to a target CPU module by obtaining credentials other than password.

In Fibaro Home Center 2 and Lite devices in all versions provide a web based management interface over unencrypted HTTP protocol. Communication between the user and the device can be eavesdropped to hijack sessions, tokens and passwords.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 196188.

Trendnet AC2600 TEW-827DRU version 2.08B01 contains an security flaw in the web interface. HTTPS is not enabled on the device by default. This results in cleartext transmission of sensitive information such as passwords.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the web interface. By default, all communication to/from the device's web interface is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

A vulnerability exists in curl <7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop (U+002E) `.`. Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.

Cleartext Transmission of Sensitive Information vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Server, Device Manager Agent, Host Data Collector components) allows Interception.This issue affects Hitachi Device Manager: before 8.8.5-02.

IBM Security Verify Governance 10.0 does not encrypt sensitive or critical information before storage or transmission. IBM X-Force ID: 256020.

CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists that could result in the exposure of data when network traffic is being sniffed by an attacker.

Communication traffic involving "Ethernet Q Commands" service of Haas Controller version 100.20.000.1110 is transmitted in cleartext. This allows an attacker to obtain sensitive information being passed to and from the controller.

bcrypt password hashing in Botan before 2.1.0 does not correctly handle passwords with a length between 57 and 72 characters, which makes it easier for attackers to determine the cleartext password.

Grand MA 300 allows retrieval of the access PIN from sniffed data.

EMC Dantz Retrospect Backup Client 7.5.116 sends the password hash in cleartext at an unspecified point, which allows remote attackers to obtain sensitive information via a crafted packet.

ZGR TPS200 NG in its 2.00 firmware version and 1.01 hardware version, allows a remote attacker with access to the web application and knowledge of the routes (URIs) used by the application, to access sensitive information about the system.

UPSMON PRO transmits sensitive data in cleartext over HTTP protocol. An unauthenticated remote attacker can exploit this vulnerability to access sensitive data.

Insertion of Sensitive Information Into Sent Data vulnerability in Liquid Web GiveWP allows Retrieve Embedded Sensitive Data.This issue affects GiveWP: from n/a before 4.6.1.

A flaw was found in Red Hat OpenShift Data Science. When exporting a pipeline from the Elyra notebook pipeline editor as Python DSL or YAML, it reads S3 credentials from the cluster (ds pipeline server) and saves them in plain text in the generated output instead of an ID for a Kubernetes secret.

Information leakage in mknotifyd in Checkmk before 2.3.0p18, 2.2.0p36, 2.1.0p49 and in 2.0.0p39 (EOL) allows attacker to get potentially sensitive data

SolarWinds N-central before 12.1 SP1 HF5 and 12.2 before SP1 HF2 allows remote attackers to retrieve cleartext domain admin credentials from the Agent & Probe settings, and obtain other sensitive information. The attacker can use a customer ID to self register and read any aspects of the agent/appliance configuration.

Ecovacs Deebot T10 1.7.2 transmits Wi-Fi credentials in cleartext during the pairing process.

Insertion of Sensitive Information Into Sent Data vulnerability in WPSpins Post/Page Copying Tool allows Retrieve Embedded Sensitive Data.This issue affects Post/Page Copying Tool: from n/a through 2.0.0.

Insertion of Sensitive Information Into Sent Data vulnerability in brandtoss WP Mailster allows Retrieve Embedded Sensitive Data.This issue affects WP Mailster: from n/a through 1.8.16.0.

A flaw was found in OpenStack. Multiple components show plain-text passwords in /var/log/messages during the OpenStack overcloud update run, leading to a disclosure of sensitive information problem.

The myMail app through 14.30 for iOS sends cleartext credentials in a situation where STARTTLS is expected by a server.

Cleartext transmission of sensitive information in acep-collector service. The following products are affected: Acronis Cyber Protect 16 (Linux, Windows) before build 38690.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is transmitted over some web applications in clear text.

An issue in YESCAM (com.yescom.YesCam.zwave) 1.0.2 allows a remote attacker to obtain sensitive information via the firmware update process.

**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause certain data to be visible on the network when the 'password' feature is enabled. This vulnerability was discovered in and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. The 'password' feature is an additional optional check performed by TS1131 that it is connected to a specific controller. This data is sent as clear text and is visible on the network. This feature is not present in TriStation 1131 versions v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions.

Hitron Technologies CODA-5310’s Telnet function transfers sensitive data in plaintext. An unauthenticated remote attacker can exploit this vulnerability to access credentials of normal users and administrator.

A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists which could leak sensitive information transmitted between the software and the Modicon M218, M241, M251, and M258 controllers.

Jenkins Kubernetes Plugin 3909.v1f2c633e8590 and earlier does not properly mask (i.e., replace with asterisks) credentials in the build log when push mode for durable task logging is enabled.