A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.

Zoho ManageEngine Asset Explorer 6.5 does not validate the System Center Configuration Manager (SCCM) database username when dynamically generating a command to schedule scans for SCCM. This allows an attacker to execute arbitrary commands on the AssetExplorer Server with NT AUTHORITY/SYSTEM privileges.

An issue was discovered in certain Oi third-party firmware that may be installed on Technicolor TD5130v2 devices. A Command Injection in the Ping module in the Web Interface in OI_Fw_V20 allows remote attackers to execute arbitrary OS commands in the pingAddr parameter to mnt_ping.cgi. NOTE: This may overlap CVE-2017–14127.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

resources/cmd.php in FusionPBX up to 4.5.7 suffers from a command injection vulnerability due to a lack of input validation, which allows authenticated administrative attackers to execute any commands on the host as www-data.

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.

A vulnerability in the Intelligent Platform Management Interface (IPMI) of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of user-supplied commands. An attacker who has administrator privileges and access to the network where the IPMI resides could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to gain root privileges on the affected device.

There is an OS Command Injection in Nexus Repository Manager <= 2.14.14 (bypass CVE-2019-5475) that could allow an attacker a Remote Code Execution (RCE). All instances using CommandLineExecutor.java with user-supplied data is vulnerable, such as the Yum Configuration Capability.

MantisBT before 1.3.20 and 2.22.1 allows Post Authentication Command Injection, leading to Remote Code Execution.

An OS command injection vulnerability in FortiExtender 4.1.0 to 4.1.1, 4.0.0 and below under CLI admin console may allow unauthorized administrators to run arbitrary system level commands via specially crafted "execute date" commands.

Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.

An issue was discovered in JetBrains TeamCity 2018.2.4. A TeamCity Project administrator could execute any command on the server machine. The issue was fixed in TeamCity 2018.2.5 and 2019.1.

A flaw was found in the CloudForms management engine version 5.10 and CloudForms management version 5.11, which triggered remote code execution through NFS schedule backup. An attacker logged into the management console could use this flaw to execute arbitrary shell commands on the CloudForms server as root.

An OS Command Injection issue exists in wivia 5 all versions. If this vulnerability is exploited, an arbitrary OS command may be executed by a logged-in administrative user.

LibreNMS versions before 26.3.0 are affected by an authenticated remote code execution vulnerability by abusing the Binary Locations config and the Netcommand feature. Successful exploitation requires administrative privileges. Exploitation could result in compromise of the underlying web server.

A flaw has been found in TRENDnet TEW-811DRU 1.0.2.0. This affects the function setDeviceURL  of the file uapply.cgi of the component httpd . This manipulation of the argument DeviceURL causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A high privileged remote attacker can execute arbitrary system commands via POST requests in the diagnostic action due to improper neutralization of special elements used in an OS command.

An OS command injection vulnerability in the web management interface of certain ASUS router models allows remote authenticated administrators to execute arbitrary system commands via a crafted parameter. Refer to the 'Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A post‑authentication command injection vulnerability in the Dynamic DNS (DDNS) configuration CLI command in Zyxel ATP series firmware versions from V5.35 through V5.41, USG FLEX series firmware versions from V5.35 through V5.41, USG FLEX 50(W) series firmware versions from V5.35 through V5.41, and USG20(W)-VPN series firmware versions from V5.35 through V5.41 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on an affected device by supplying a specially crafted string as an argument to the CLI command.

OS command injection in the admin panel of Ivanti EPMM before version 12.6.0.2, 12.5.0.4, and 12.4.0.4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

In Flowmon versions prior to 12.5.5, a vulnerability has been identified that allows a user with administrator privileges and access to the management interface to execute additional unintended commands within scripts intended for troubleshooting purposes.

A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

NEC Corporation Aterm WX1500HP Ver.1.4.2 and earlier and WX3600HP Ver.1.5.3 and earlier allows a attacker to execute arbitrary OS commands via the network.

A post-authentication command injection vulnerability in the "host" parameter of the diagnostic function in Zyxel VMG4005-B50A firmware versions through V5.15(ABQA.2.2)C0 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

An OS command injection vulnerability in the admin web console of Ivanti CSA before version 5.0.2 allows a remote authenticated attacker with admin privileges to obtain remote code execution.

An input validation weakness was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection through specially crafted command line input in the XCC SSH captive shell.

The specific CGI of the CAYIN Technology CMS does not properly validate user input, allowing a remote attacker with administrator privileges to inject OS commands into the specific parameter and execute them on the remote server.

Improper Input Validation vulnerability in Progress LoadMaster allows OS Command Injection.This issue affects: * LoadMaster: 7.2.40.0 and above * ECS: All versions * Multi-Tenancy: 7.1.35.4 and above

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.60 through V5.38 and USG FLEX series firmware versions from V4.60 through V5.38 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device by executing a crafted CLI command.

DGM3103SCT provided by AVTECH Security Corporation contains an OS command injection vulnerability, which may lead to arbitrary command execution with the root privilege by a user who can log in to the web management console of the affected product.

Anevia Flamingo XL 3.2.9 contains a restricted shell vulnerability that allows remote attackers to escape the sandboxed environment through the traceroute command. Attackers can exploit the traceroute command to inject shell commands and gain full root access to the device by bypassing the restricted login environment.

The ImageMagick Engine ImageMagick Engine WordPress plugin before 1.7.11 for WordPress is vulnerable to OS Command Injection via the "cli_path" parameter. This allows authenticated attackers, with administrator-level permission to execute arbitrary OS commands on the server leading to remote code execution.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.5.x: 6.5.4.17 and below; Aruba Instant 8.3.x: 8.3.0.13 and below; Aruba Instant 8.5.x: 8.5.0.10 and below; Aruba Instant 8.6.x: 8.6.0.5 and below; Aruba Instant 8.7.x: 8.7.0.0 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_normal_mode` parameter.

An improper neutralization of special elements used in an OS Command vulnerability in the administrative interface of FortiMail before 6.4.4 may allow an authenticated attacker to execute unauthorized commands via specifically crafted HTTP requests.

Authenticated Remote Code Execution in Altalink, Versalink & WorkCentre Products.

Cacti is an open source operational monitoring and fault management framework. In Cacti 1.2.24, under certain conditions, an authenticated privileged user, can use a malicious string in the SNMP options of a Device, performing command injection and obtaining remote code execution on the underlying server. The `lib/snmp.php` file has a set of functions, with similar behavior, that accept in input some variables and place them into an `exec` call without a proper escape or validation. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).

A high privileged remote attacker can execute arbitrary system commands via GET requests due to improper neutralization of special elements used in an OS command.

MaxKB, which stands for Max Knowledge Base, is an open source knowledge base question-answering system based on a large language model and retrieval-augmented generation (RAG). Prior to version 1.9.0, a remote command execution vulnerability exists in the module of function library. The vulnerability allow privileged‌ users to execute OS command in custom scripts. The vulnerability has been fixed in v1.9.0.

IBM DevOps Deploy 8.0 through 8.0.1.4, 8.1 through 8.1.0.0 / IBM UrbanCode Deploy 7.0 through 7.0.5.25, 7.1 through 7.1.2.21, 7.2 through 7.2.3.14, and 7.3 through 7.3.2.9 could allow a remote privileged authenticated attacker to execute arbitrary commands on the system by sending specially crafted input containing special elements.

An instance of improper neutralization of special elements in the sniffer module of FortiSandbox before 3.2.2 may allow an authenticated administrator to execute commands on the underlying system's shell via altering the content of its configuration file.