Dell Enterprise SONiC OS, version(s) 4.1.x, 4.2.x, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. This is a critical severity vulnerability so Dell recommends customers to upgrade at the earliest opportunity.

An OS command injection vulnerability allows admins to execute code via SSL VPN configuration uploads in Sophos Firewall releases older than version 19.5 GA.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240428. Affected by this issue is some unknown functionality of the file /view/HAconfig/baseConfig/commit.php. The manipulation of the argument peer_ip/local_ip leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263108. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiExtender 7.6.0 through 7.6.3, FortiExtender 7.4.0 through 7.4.7, FortiExtender 7.2 all versions, FortiExtender 7.0 all versions may allow an authenticated attacker to execute unauthorized code or commands via a specific HTTP request.

IBM Security Directory Suite VA 8.0.1 through 8.0.1.19 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 228439.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Centreon Infra Monitoring (Poller reload setup in the configuration modules) allows OS Command Injection. On the poller parameters page, a user with high privilege is able to concatenate custom instructions into the poller reload command. This issue affects Infra Monitoring: from 24.10.0 before 24.10.13, from 24.04.0 before 24.04.18, from 23.10.0 before 23.10.28.

The Web Set Media Image function in ASUS BMC’s firmware Web management page does not filter the specific parameter. As obtaining the administrator permission, remote attackers can launch command injection to execute command arbitrary.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240419. This issue affects some unknown processing of the file /view/network Config/GRE/gre_edit_commit.php. The manipulation of the argument name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-262145 was assigned to this vulnerability.

IDExpert from CHANGING Information Technology does not properly validate a specific parameter in the administrator interface, allowing remote attackers with administrative privileges to inject and execute OS commands on the server.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Authenticated command execution vulnerability exist in the ArubaOS command line interface (CLI). Successful exploitation of this vulnerabilities result in the ability to run arbitrary commands as a priviledge user on the underlying operating system.

The function "generate_app_certificates" in controllers/saml2/saml2.js of FIWARE Keyrock <= 8.4 does not neutralize special elements used in an OS Command properly. This allows an authenticated user with permissions to create applications to execute commands by creating an application with a malicious organisationname.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices does not sanitize the language parameter in specific POST requests. This could allow an authenticated remote attacker to execute arbitrary code with root privileges.

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted internal user agreement file to the vulnerable device.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices does not sanitize the input parameters in specific GET requests. This could allow an authenticated remote attacker to execute arbitrary code with root privileges.

The function "generate_app_certificates" in lib/app_certificates.js of FIWARE Keyrock <= 8.4 does not neutralize special elements used in an OS Command properly. This allows an authenticated user with permissions to create applications to execute commands by creating an application with a malicious name.

Authenticated command injection vulnerability exists in the ArubaOS command line interface. Successful exploitation of this vulnerability result in the ability to inject shell commands on the underlying operating system.

A privileged attacker in GeoNetwork before 3.12.0 and 4.x before 4.0.4 can use the directory harvester before-script to execute arbitrary OS commands remotely on the hosting infrastructure. A User Administrator or Administrator account is required to perform this. This occurs in the runBeforeScript method in harvesters/src/main/java/org/fao/geonet/kernel/harvest/harvester/localfilesystem/LocalFilesystemHarvester.java. The earliest affected version is 3.4.0.

The Cron job tab in EasyCorp ZenTao 12.5.3 allows remote attackers (who have admin access) to execute arbitrary code by setting the type parameter to System.

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V5.00 through V5.38, USG FLEX series firmware versions from V5.00 through V5.38, USG FLEX 50(W) series firmware versions from V5.00 through V5.38, and USG20(W)-VPN series firmware versions from V5.00 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted compressed language file via FTP.

A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

MotionEye v0.43.1b4 and before is vulnerable to OS Command Injection in configuration parameters such as image_file_name. Unsanitized user input is written to Motion configuration files, allowing remote authenticated attackers with admin access to achieve code execution when Motion is restarted.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiAnalyzer version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiManager version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiAnalyzer BigData version 7.4.0, 7.2.0 through 7.2.7, 7.0.1 through 7.0.6, 6.4.5 through 6.4.7 and 6.2.5, Fortinet FortiAnalyzer Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 and Fortinet FortiManager Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 GUI allows an authenticated privileged attacker to execute unauthorized code or commands via crafted HTTPS or HTTP requests.

SVR-116 firmware version 1.6.0.30028871 allows a remote authenticated attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

The Backup Migration plugin for WordPress is vulnerable to OS Command Injection in all versions up to, and including, 1.3.9 via the 'url' parameter. This vulnerability allows authenticated attackers, with administrator-level permissions and above, to execute arbitrary commands on the host operating system.

The specific function in ASUS BMC’s firmware Web management page (Modify user’s information function) does not filter the specific parameter. As obtaining the administrator permission, remote attackers can launch command injection to execute command arbitrary.

NETGEAR DGN2200v4 devices before 2017-01-06 are affected by command execution and an FTP insecure root directory.

Three OS command injection vulnerabilities exist in the web interface I/O configuration functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability refers to the authenticated OS Command Injection that occurs through the attacker-controlled `out1` parameter, at offset `0x8efc`. int out_ret = sscanf(current_param->key, "out%u", &io_idx); if (out_ret == 1 && io_idx == 1) { // [4] Similar to `3`, but `out1` instead of `btn1` if (asprintf(&command, "/usr/sbin/vout %s %u vo_manual", current_param->value, 1) > 0) { system(command); return -1; } }

A command injection vulnerability exists in the com.webos.service.connectionmanager/tv/setVlanStaticAddress endpoint on webOS versions 5 and 6. A series of specially crafted requests can lead to command execution as the dbus user. An attacker can make authenticated requests to trigger this vulnerability. Full versions and TV models affected: * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB

A command injection vulnerability exists in the processAnalyticsReport method from the com.webos.service.cloudupload service on webOS version 5 through 7. A series of specially crafted requests can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability. Full versions and TV models affected: * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB  * webOS 7.3.1-43 (mullet-mebin) - 03.33.85 running on OLED55A23LA

Three OS command injection vulnerabilities exist in the web interface I/O configuration functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability refers to the authetnicated OS Command injection that occurs through the attacker-controlled `timer1` parameter, at offset `0x8e80`.

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.

In the backup parameters, a user with high privilege is able to concatenate custom instructions to the backup setup. Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Centreon Infra Monitoring (Backup configuration in the administration setup modules) allows OS Command Injection.This issue affects Infra Monitoring: from 25.10.0 before 25.10.2, from 24.10.0 before 24.10.15, from 24.04.0 before 24.04.19.

NETGEAR Prosafe WC9500 5.1.0.17, WC7600 5.1.0.17, and WC7520 2.5.0.35 devices allow a remote attacker to execute code with root privileges via shell metacharacters in the reqMethod parameter to login_handler.php.

A post-authentication command injection vulnerability in the file upload binary in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1, NWA50AX firmware versions through 6.29(ABYW.3), WAC500 firmware versions through 6.65(ABVS.1), WAX300H firmware versions through 6.60(ACHF.1), and WBE660S firmware versions through 6.65(ACGG.1) could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device via FTP.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. To exploit this vulnerability, an attacker must have valid Administrator privileges on the affected device.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiManager version 7.0.0 through 7.0.3, 6.4.0 through 6.4.7, 6.2.x and 6.0.x and FortiAnalyzer version 7.0.0 through 7.0.3, version 6.4.0 through 6.4.7, 6.2.x and 6.0.x allows attacker to execute arbitrary shell code as `root` user via `diagnose system` CLI commands.

A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability exists in the getAudioMetadata method from the com.webos.service.attachedstoragemanager service on webOS version 4 through 7. A series of specially crafted requests can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability. * webOS 4.9.7 - 5.30.40 running on LG43UM7000PLA  * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB  * webOS 7.3.1-43 (mullet-mebin) - 03.33.85 running on OLED55A23LA

A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Command injection vulnerability in the Edge Computing UI for the TRO600 series radios that allows for the execution of arbitrary system commands. If exploited, an attacker with write access to the web UI can execute commands on the device with root privileges, far more extensive than what the write privilege intends.

An issue was discovered in Galleon NTS-6002-GPS 4.14.103-Galleon-NTS-6002.V12 4. An authenticated attacker can perform command injection as root via shell metacharacters within the Network Tools section of the web-management interface. All three networking tools are affected (Ping, Traceroute, and DNS Lookup) and their respective input fields (ping_address, trace_address, nslookup_address).

A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.