A flaw was found in grub2. When performing a symlink lookup from a romfs filesystem, grub's romfs filesystem module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_romfs_read_symlink() may cause out-of-bounds writes when the calling grub_disk_read() function. This issue may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution by-passing secure boot protections.

A flaw was found in grub2. When performing a symlink lookup, the grub's UFS module checks the inode's data size to allocate the internal buffer to read the file content, however, it fails to check if the symlink data size has overflown. When this occurs, grub_malloc() may be called with a smaller value than needed. When further reading the data from the disk into the buffer, the grub_ufs_lookup_symlink() function will write past the end of the allocated size. An attack can leverage this by crafting a malicious filesystem, and as a result, it will corrupt data stored in the heap, allowing for arbitrary code execution used to by-pass secure boot mechanisms.

A flaw was found in grub2. When performing a symlink lookup from a reiserfs filesystem, grub's reiserfs fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_reiserfs_read_symlink() will call grub_reiserfs_read_real() with a overflown length parameter, leading to a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution, by-passing secure boot protections.

There's a use-after-free vulnerability in grub_cmd_chainloader() function; The chainloader command is used to boot up operating systems that doesn't support multiboot and do not have direct support from GRUB2. When executing chainloader more than once a use-after-free vulnerability is triggered. If an attacker can control the GRUB2's memory allocation pattern sensitive data may be exposed and arbitrary code execution can be achieved.

GRUB2 fails to validate kernel signature when booted directly without shim, allowing secure boot to be bypassed. This only affects systems where the kernel signing certificate has been imported directly into the secure boot database and the GRUB image is booted directly without the use of shim. This issue affects GRUB2 version 2.04 and prior versions.

GRUB2 contains a race condition in grub_script_function_create() leading to a use-after-free vulnerability which can be triggered by redefining a function whilst the same function is already executing, leading to arbitrary code execution and secure boot restriction bypass. This issue affects GRUB2 version 2.04 and prior versions.

If certificates that signed grub are installed into db, grub can be booted directly. It will then boot any kernel without signature validation. The booted kernel will think it was booted in secureboot mode and will implement lockdown, yet it could have been tampered. This flaw is a reintroduction of CVE-2020-15705 and only affects grub2 versions prior to 2.06 and upstream and distributions using the shim_lock mechanism.

A container privilege escalation flaw was found in certain Multi-Cloud Object Gateway Core images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container

Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images. In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in certain CodeReady Workspaces images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in certain Fuse images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in KServe ModelMesh container images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

Integer overflows were discovered in the functions grub_cmd_initrd and grub_initrd_init in the efilinux component of GRUB2, as shipped in Debian, Red Hat, and Ubuntu (the functionality is not included in GRUB2 upstream), leading to a heap-based buffer overflow. These could be triggered by an extremely large number of arguments to the initrd command on 32-bit architectures, or a crafted filesystem with very large files on any architecture. An attacker could use this to execute arbitrary code and bypass UEFI Secure Boot restrictions. This issue affects GRUB2 version 2.04 and prior versions.

In grub2 versions before 2.06 the grub memory allocator doesn't check for possible arithmetic overflows on the requested allocation size. This leads the function to return invalid memory allocations which can be further used to cause possible integrity, confidentiality and availability impacts during the boot process.

There is a use-after-free in kernel versions before 5.5 due to a race condition between the release of ptp_clock and cdev while resource deallocation. When a (high privileged) process allocates a ptp device file (like /dev/ptpX) and voluntarily goes to sleep. During this time if the underlying device is removed, it can cause an exploitable condition as the process wakes up to terminate and clean all attached files. The system crashes due to the cdev structure being invalid (as already freed) which is pointed to by the inode.

A use-after-free flaw was found in nfc_llcp_find_local in net/nfc/llcp_core.c in NFC in the Linux kernel. This flaw allows a local user with special privileges to impact a kernel information leak issue.

A race condition was found in the QXL driver in the Linux kernel. The qxl_mode_dumb_create() function dereferences the qobj returned by the qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. This flaw allows an attacker to guess the returned handle value and trigger a use-after-free issue, potentially leading to a denial of service or privilege escalation.

A flaw was found in command/gpg. In some scenarios, hooks created by loaded modules are not removed when the related module is unloaded. This flaw allows an attacker to force grub2 to call the hooks once the module that registered it was unloaded, leading to a use-after-free vulnerability. If correctly exploited, this vulnerability may result in arbitrary code execution, eventually allowing the attacker to bypass secure boot protections.

A container privilege escalation flaw was found in certain AMQ Broker images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in certain Multicluster Engine for Kubernetes images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in certain Ansible Automation Platform images. This issue arises from the /etc/passwd file being created with group-writable permissions during the build process. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This vulnerability allows an attacker to add a new user with any arbitrary UID, including UID 0, gaining full root privileges within the container.

A container privilege escalation flaw was found in certain Red Hat Process Automation Manager images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in certain Web Terminal images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in certain OpenShift Update Service (OSUS) images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A container privilege escalation flaw was found in certain Container-native Virtualization images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

A bug in QEMU could cause a guest I/O operation otherwise addressed to an arbitrary disk offset to be targeted to offset 0 instead (potentially overwriting the VM's boot code). This could be used, for example, by L2 guests with a virtual disk (vdiskL2) stored on a virtual disk of an L1 (vdiskL1) hypervisor to read and/or write data to LBA 0 of vdiskL1, potentially gaining control of L1 at its next reboot.

A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues.

An out-of-bounds write flaw was found in mpg123 when handling crafted streams. When decoding PCM, the libmpg123 may write past the end of a heap-located buffer. Consequently, heap corruption may happen, and arbitrary code execution is not discarded. The complexity required to exploit this flaw is considered high as the payload must be validated by the MPEG decoder and the PCM synth before execution. Additionally, to successfully execute the attack, the user must scan through the stream, making web live stream content (such as web radios) a very unlikely attack vector.

A flaw was found in the GNU coreutils "split" program. A heap overflow with user-controlled data of multiple hundred bytes in length could occur in the line_bytes_split() function, potentially leading to an application crash and denial of service.

An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system.

A flaw was found in X.Org server. Both DeviceFocusEvent and the XIQueryPointer reply contain a bit for each logical button currently down. Buttons can be arbitrarily mapped to any value up to 255, but the X.Org Server was only allocating space for the device's particular number of buttons, leading to a heap overflow if a bigger value was used.

An off-by-one heap-based buffer overflow was found in the __vsyslog_internal function of the glibc library. This function is called by the syslog and vsyslog functions. This issue occurs when these functions are called with a message bigger than INT_MAX bytes, leading to an incorrect calculation of the buffer size to store the message, resulting in an application crash. This issue affects glibc 2.37 and newer.

An issue was found in the tiffcp utility distributed by the libtiff package where a crafted TIFF file on processing may cause a heap-based buffer overflow leads to an application crash.

A heap-based Buffer Overflow flaw was discovered in Samba. It could allow a remote, authenticated attacker to exploit this vulnerability to cause a denial of service.

A buffer overflow flaw was found in X.Org and Xwayland. The code in XkbVModMaskText() allocates a fixed-sized buffer on the stack and copies the names of the virtual modifiers to that buffer. The code fails to check the bounds of the buffer and would copy the data regardless of the size.

A out-of-bounds write flaw was found in the xorg-x11-server. This issue occurs due to an incorrect calculation of a buffer offset when copying data stored in the heap in the XIChangeDeviceProperty function in Xi/xiproperty.c and in RRChangeOutputProperty function in randr/rrproperty.c, allowing for possible escalation of privileges or denial of service.

A flaw was found in indent, a program for formatting C code. This issue may allow an attacker to trick a user into processing a specially crafted file to trigger a heap-based buffer overflow, causing the application to crash.

An out-of-memory flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFRasterScanlineSize64() API. This flaw allows a remote attacker to cause a denial of service via a crafted input with a size smaller than 379 KB.

Out-of-bounds write when handling split HTTP headers; When handling split HTTP headers, GRUB2 HTTP code accidentally moves its internal data buffer point by one position. This can lead to a out-of-bound write further when parsing the HTTP request, writing a NULL byte past the buffer. It's conceivable that an attacker controlled set of packets can lead to corruption of the GRUB2's internal memory metadata.

An out-of-bounds memory access flaw was found in the X.Org server. This issue can be triggered when a device frozen by a sync grab is reattached to a different master device. This issue may lead to an application crash, local privilege escalation (if the server runs with extended privileges), or remote code execution in SSH X11 forwarding environments.

sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \x00\x04\x00\x00\x00\x00\x00\x00\x00\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of "Fixed for glibc 2.33" in the 26649 reference.

Stack-based buffer overflow in the clntudp_call function in sunrpc/clnt_udp.c in the GNU C Library (aka glibc or libc6) allows remote servers to cause a denial of service (crash) or possibly unspecified other impact via a flood of crafted ICMP and UDP packets.

A flaw was found in grub2 in versions prior to 2.06. Variable names present are expanded in the supplied command line into their corresponding variable contents, using a 1kB stack buffer for temporary storage, without sufficient bounds checking. If the function is called with a command line that references a variable with a sufficiently large payload, it is possible to overflow the stack buffer, corrupt the stack frame and control execution which could also circumvent Secure Boot protections. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

A flaw was found in grub2 in versions prior to 2.06. During USB device initialization, descriptors are read with very little bounds checking and assumes the USB device is providing sane values. If properly exploited, an attacker could trigger memory corruption leading to arbitrary code execution allowing a bypass of the Secure Boot mechanism. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.

An attacker with local access to a system (either through a disk or external drive) can present a modified XFS partition to grub-legacy in such a way to exploit a memory corruption in grub’s XFS file system implementation.

A flaw was found in the X.Org server. The cursor code in both Xephyr and Xwayland uses the wrong type of private at creation. It uses the cursor bits type with the cursor as private, and when initiating the cursor, that overwrites the XSELINUX context.

A heap based buffer overflow vulnerability exists in GNU LibreDWG 0.10.2641 via htmlescape ../../programs/escape.c:48.