Bugsink is a self-hosted error tracking tool. In versions prior to 2.0.5, brotli "bombs" (highly compressed brotli streams, such as many zeros) can be sent to the server. Since the server will attempt to decompress these streams before applying various maximums, this can lead to exhaustion of the available memory and thus a Denial of Service. This can be done if the `DSN` is known, which it is in many common setups (JavaScript, Mobile Apps). The issue is patched in Bugsink version `2.0.5`. The vulnerability is similar to, but distinct from, another brotli-related problem in Bugsink, GHSA-rrx3-2x4g-mq2h/CVE-2025-64509.

A memory allocation issue in vernemq v2.0.1 allows attackers to cause a Denial of Service (DoS) via excessive memory consumption.

A flaw was discovered in Undertow in versions before Undertow 2.1.1.Final where certain requests to the "Expect: 100-continue" header may cause an out of memory error. This flaw may potentially lead to a denial of service.

The SSH daemon on MikroTik routers through v6.44.3 could allow remote attackers to generate CPU activity, trigger refusal of new authorized connections, and cause a reboot via connect and write system calls, because of uncontrolled resource management.

A vulnerability has been identified in SIMATIC CP 1242-7 V2 (6GK7242-7KX31-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-1 (6GK7243-1BX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-1 DNP3 (incl. SIPLUS variants) (All versions < V3.4.29), SIMATIC CP 1243-1 IEC (incl. SIPLUS variants) (All versions < V3.4.29), SIMATIC CP 1243-7 LTE EU (6GK7243-7KX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-7 LTE US (6GK7243-7SX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-8 IRC (6GK7243-8RX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIMATIC CP 443-1 (6GK7443-1EX30-0XE0) (All versions < V3.3), SIMATIC CP 443-1 (6GK7443-1EX30-0XE1) (All versions < V3.3), SIMATIC CP 443-1 Advanced (6GK7443-1GX30-0XE0) (All versions < V3.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS NET CP 1242-7 V2 (6AG1242-7KX31-7XE0) (All versions < V3.4.29), SIPLUS NET CP 443-1 (6AG1443-1EX30-4XE0) (All versions < V3.3), SIPLUS NET CP 443-1 Advanced (6AG1443-1GX30-4XE0) (All versions < V3.3), SIPLUS S7-1200 CP 1243-1 (6AG1243-1BX30-2AX0) (All versions < V3.4.29), SIPLUS S7-1200 CP 1243-1 RAIL (6AG2243-1BX30-1XE0) (All versions < V3.4.29), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.3.6), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.3.6). The webserver of the affected products contains a vulnerability that may lead to a denial of service condition. An attacker may cause a denial of service situation of the webserver of the affected product.

Bugsink is a self-hosted error tracking tool. In versions prior to 2.0.6, a specially crafted Brotli-compressed envelope can cause Bugsink to spend excessive CPU time in decompression, leading to denial of service. This can be done if the DSN is known, which it is in many common setups (JavaScript, Mobile Apps). The issue is patched in Bugsink 2.0.6. The vulnerability is similar to, but distinct from, another brotli-related problem in Bugsink, GHSA-fc2v-vcwj-269v/CVE-2025-64508.

The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. In versions from 1.3.3 to before 1.3.5 and from 1.4.0 to before 1.4.2, the ExceededSizeError exception messages are embedded with non-decoded JWT token parts and may cause Python logging to record an arbitrarily large, forged JWT payload. In situations where a misconfigured — or entirely absent — production-grade web server sits in front of a Python web application, an attacker may be able to send arbitrarily large bearer tokens in the HTTP request headers. When this occurs, Python logging or diagnostic tools (e.g., Sentry) may end up processing extremely large log messages containing the full JWT header during the joserfc.jwt.decode() operation. The same behavior also appears when validating claims and signature payload sizes, as the library raises joserfc.errors.ExceededSizeError() with the full payload embedded in the exception message. Since the payload is already fully loaded into memory at this stage, the library cannot prevent or reject it. This issue has been patched in versions 1.3.5 and 1.4.2.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default).

A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

The processing time for parsing some invalid inputs scales non-linearly with respect to the size of the input. This affects programs which parse untrusted PEM inputs.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

A malicious user may submit a specially-crafted complex payload that otherwise meets the default request size limit which results in excessive memory and CPU consumption of Vault. This may lead to a timeout in Vault’s auditing subroutine, potentially resulting in the Vault server to become unresponsive. This vulnerability, CVE-2025-6203, is fixed in Vault Community Edition 1.20.3 and Vault Enterprise 1.20.3, 1.19.9, 1.18.14, and 1.16.25.

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.5, Authlib’s JOSE implementation accepts unbounded JWS/JWT header and signature segments. A remote attacker can craft a token whose base64url‑encoded header or signature spans hundreds of megabytes. During verification, Authlib decodes and parses the full input before it is rejected, driving CPU and memory consumption to hostile levels and enabling denial of service. Version 1.6.5 patches the issue. Some temporary workarounds are available. Enforce input size limits before handing tokens to Authlib and/or use application-level throttling to reduce amplification risk.

An attacker that gains SSH access to an unprivileged account may be able to disrupt services (including SSH), causing persistent loss of availability.

Russh is a Rust SSH client & server library. Allocating an untrusted amount of memory allows any unauthenticated user to OOM a russh server. An SSH packet consists of a 4-byte big-endian length, followed by a byte stream of this length. After parsing and potentially decrypting the 4-byte length, russh allocates enough memory for this bytestream, as a performance optimization to avoid reallocations later. But this length is entirely untrusted and can be set to any value by the client, causing this much memory to be allocated, which will cause the process to OOM within a few such requests. This vulnerability is fixed in 0.44.1.

When the Allowed IP Addresses feature is configured on the F5OS-C partition control plane, undisclosed traffic can cause multiple containers to terminate.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

libexpat in Expat before 2.7.2 allows attackers to trigger large dynamic memory allocations via a small document that is submitted for parsing.

Rack is a modular Ruby web server interface. Prior to version 2.2.18, Rack::QueryParser enforces its params_limit only for parameters separated by &, while still splitting on both & and ;. As a result, attackers could use ; separators to bypass the parameter count limit and submit more parameters than intended. Applications or middleware that directly invoke Rack::QueryParser with its default configuration (no explicit delimiter) could be exposed to increased CPU and memory consumption. This can be abused as a limited denial-of-service vector. This issue has been patched in version 2.2.18.

xgrammar is an open-source library for efficient, flexible, and portable structured generation. A grammar optimizer introduced in 0.1.23 processes large grammars (>100k characters) at very low rates, and can be used for DOS of model providers. This issue is fixed in version 0.1.24.

Axios is a promise based HTTP client for the browser and Node.js. When Axios starting in version 0.28.0 and prior to versions 0.30.2 and 1.12.0 runs on Node.js and is given a URL with the `data:` scheme, it does not perform HTTP. Instead, its Node http adapter decodes the entire payload into memory (`Buffer`/`Blob`) and returns a synthetic 200 response. This path ignores `maxContentLength` / `maxBodyLength` (which only protect HTTP responses), so an attacker can supply a very large `data:` URI and cause the process to allocate unbounded memory and crash (DoS), even if the caller requested `responseType: 'stream'`. Versions 0.30.2 and 1.12.0 contain a patch for the issue.

Fastify node module before 0.38.0 is vulnerable to a denial-of-service attack by sending a request with "Content-Type: application/json" and a very large payload.

If a user tries to login but the provided credentials are incorrect a log is created. The data for this POST requests is not validated and it’s possible to send giant payloads which are then logged.

pypdf is a free and open-source pure-python PDF library. Prior to version 6.0.0, an attacker can craft a PDF which leads to the RAM being exhausted. This requires just reading the file if a series of FlateDecode filters is used on a malicious cross-reference stream. Other content streams are affected on explicit access. This issue has been fixed in 6.0.0. If an update is not possible, a workaround involves including the fixed code from pypdf.filters.decompress into the existing filters file.

Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.124.Final and 4.2.4.Final, Netty is vulnerable to MadeYouReset DDoS. This is a logical vulnerability in the HTTP/2 protocol, that uses malformed HTTP/2 control frames in order to break the max concurrent streams limit - which results in resource exhaustion and distributed denial of service. This issue has been patched in versions 4.1.124.Final and 4.2.4.Final.

Mastodon is a free, open-source social network server based on ActivityPub Mastodon which facilitates LDAP configuration for authentication. In versions 3.1.5 through 4.2.24, 4.3.0 through 4.3.11 and 4.4.0 through 4.4.3, Mastodon's rate-limiting system has a critical configuration error where the email-based throttle for confirmation emails incorrectly checks the password reset path instead of the confirmation path, effectively disabling per-email limits for confirmation requests. This allows attackers to bypass rate limits by rotating IP addresses and send unlimited confirmation emails to any email address, as only a weak IP-based throttle (25 requests per 5 minutes) remains active. The vulnerability enables denial-of-service attacks that can overwhelm mail queues and facilitate user harassment through confirmation email spam. This is fixed in versions 4.2.24, 4.3.11 and 4.4.3.

A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.

LiteSpeed QUIC (LSQUIC) Library before 4.3.1 has an lsquic_engine_packet_in memory leak.

WeGIA is a web manager for charitable institutions. The Wegia server has a vulnerability that allows excessively long HTTP GET requests to a specific URL. This issue arises from the lack of validation for the length of the errorstr parameter. Tests confirmed that the server processes URLs up to 8,142 characters, resulting in high resource consumption, elevated latency, timeouts, and read errors. This makes the server susceptible to Denial of Service (DoS) attacks. This vulnerability is fixed in 3.3.0.

Connections received from the proxy port may not count towards total accepted connections, resulting in server crashes if the total number of connections exceeds available resources. This only applies to connections accepted from the proxy port, pending the proxy protocol header.

WeGIA is a web manager for charitable institutions. The Wegia server has a vulnerability that allows excessively long HTTP GET requests to a specific URL. This issue arises from the lack of validation for the length of the fid parameter. Tests confirmed that the server processes URLs up to 8,142 characters, resulting in high resource consumption, elevated latency, timeouts, and read errors. This makes the server susceptible to Denial of Service (DoS) attacks. This vulnerability is fixed in 3.3.0.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Version 0.5.46 may parse malformed request traffic, leading to excessive CPU usage. Version 0.5.47 contains a patch for the issue. No known workarounds are available.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0.

When a BIG-IP APM Access Policy is configured on a virtual server, undisclosed traffic can cause TMM to terminate.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Adacore Ada Web Server (AWS) before 25.2 is vulnerable to a denial-of-service (DoS) condition due to improper handling of SSL handshakes during connection initialization. When a client initiates an HTTPS connection, the server performs the SSL handshake before assigning the connection to a processing slot. However, there is no specific timeout set for this phase, and the server uses the default socket timeout, which is effectively infinite. An attacker can exploit this by sending a malformed TLS ClientHello message with incorrect length values. This causes the server to wait indefinitely for data that never arrives, blocking the worker thread (Line) handling the connection. By opening multiple such connections, up to the server's maximum limit, the attacker can exhaust all available working threads, preventing the server from handling new, legitimate requests.

An issue in Technitium DNS Server v.13.5 allows a remote attacker to cause a denial of service via the rate-limiting component

Pion Interceptor is a framework for building RTP/RTCP communication software. Versions v0.1.36 through v0.1.38 contain a bug in a RTP packet factory that can be exploited to trigger a panic with Pion based SFU via crafted RTP packets, This only affect users that use pion/interceptor. Users should upgrade to v0.1.39 or later, which validates that: `padLen > 0 && padLen <= payloadLength` and return error on overflow, avoiding panic. If upgrading is not possible, apply the patch from the pull request manually or drop packets whose P-bit is set but whose padLen is zero or larger than the remaining payload.

Windows Hyper-V Denial of Service Vulnerability

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

IBM TXSeries for Multiplatforms 10.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service.

Allocation of Resources Without Limits or Throttling in GitHub repository froxlor/froxlor prior to 2.0.16.

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

It is possible for a Reader to consume memory beyond the allowed constraints and thus lead to out of memory on the system. This issue affects Rust applications using Apache Avro Rust SDK prior to 0.14.0 (previously known as avro-rs). Users should update to apache-avro version 0.14.0 which addresses this issue.

Rust-WebSocket is a WebSocket (RFC6455) library written in Rust. In versions prior to 0.26.5 untrusted websocket connections can cause an out-of-memory (OOM) process abort in a client or a server. The root cause of the issue is during dataframe parsing. Affected versions would allocate a buffer based on the declared dataframe size, which may come from an untrusted source. When `Vec::with_capacity` fails to allocate, the default Rust allocator will abort the current process, killing all threads. This affects only sync (non-Tokio) implementation. Async version also does not limit memory, but does not use `with_capacity`, so DoS can happen only when bytes for oversized dataframe or message actually got delivered by the attacker. The crashes are fixed in version 0.26.5 by imposing default dataframe size limits. Affected users are advised to update to this version. Users unable to upgrade are advised to filter websocket traffic externally or to only accept trusted traffic.

A remote, unauthenticated attacker could cause a denial-of-service of PHOENIX CONTACT FL MGUARD and TC MGUARD devices below version 8.9.0 by sending a larger number of unauthenticated HTTPS connections originating from different source IP’s. Configuring firewall limits for incoming connections cannot prevent the issue.

IBM TXSeries for Multiplatforms 10.1 could allow a remote attacker to cause a denial of service using persistent connections due to improper allocation of resources.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Prior to versions 3.1.8 and 3.2.5, OpenSIPS crashes when a malformed SDP body is sent multiple times to an OpenSIPS configuration that makes use of the `stream_process` function. This issue was discovered during coverage guided fuzzing of the function `codec_delete_except_re`. By abusing this vulnerability, an attacker is able to crash the server. It affects configurations containing functions that rely on the affected code, such as the function `codec_delete_except_re`. This issue has been fixed in version 3.1.8 and 3.2.5.

In BIG-IP tenants running on r2000 and r4000 series hardware, or BIG-IP Virtual Edition (VEs) using Intel E810 SR-IOV NIC, undisclosed traffic can cause an increase in memory resource utilization.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Allocation of Resources Without Limits or Throttling in GitHub repository ikus060/rdiffweb prior to 2.5.0a3.