The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Jonathan Looney discovered that the Linux kernel default MSS is hard-coded to 48 bytes. This allows a remote peer to fragment TCP resend queues significantly more than if a larger MSS were enforced. A remote attacker could use this to cause a denial of service. This has been fixed in stable kernel releases 4.4.182, 4.9.182, 4.14.127, 4.19.52, 5.1.11, and is fixed in commits 967c05aee439e6e5d7d805e195b3a20ef5c433d6 and 5f3e2bf008c2221478101ee72f5cb4654b9fc363.

IBM Counter Fraud Management for Safer Payments 6.1.0.00, 6.2.0.00, 6.3.0.00 through 6.3.1.03, 6.4.0.00 through 6.4.2.02 and 6.5.0.00 does not properly allocate resources without limits or throttling which could allow a remote attacker to cause a denial of service. IBM X-Force ID: 249190.

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS could allow a remote attacker to cause a denial of service due to an error processing invalid data. IBM X-Force ID: 248418.

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service with a specially crafted query when autonomous transactions are enabled.

IBM i 7.6 could allow a remote attacker to cause a denial of service using failed authentication connections due to improper allocation of resources.

Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations. To remediate this issue, users should upgrade to version 2.1.0.0.

Allocation of Resources Without Limits or Throttling vulnerability in Hitachi Ops Center Common Services on Linux allows DoS.This issue affects Hitachi Ops Center Common Services: before 10.9.3-00.

IBM Security Guardium Big Data Intelligence 4.0 (SonarG) does not properly restrict the size or amount of resources that are requested or influenced by an actor. This weakness can be used to consume more resources than intended. IBM X-Force ID: 161417.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume all available memory. IBM X-Force ID: 172125.

IBM Safer Payments 6.4.0.00 through 6.4.2.07, 6.5.0.00 through 6.5.0.05, and 6.6.0.00 through 6.6.0.03 could allow a remote attacker to cause a denial of service due to improper allocation of resources.

IBM TXSeries for Multiplatforms 10.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, and 9.3 CD is vulnerable to a denial of service attack caused by an error applying configuration changes. IBM X-Force ID: 290335.

IBM WebSphere Application Server Liberty 18.0.0.2 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 284574.

IBM WebSphere Application Server 8.5, 9.0 and IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 are vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 281516.

IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 280400.

IBM Secure External Authentication Server 2.4.3.2, 6.0.1, 6.0.2 and IBM Secure Proxy 3.4.3.2, 6.0.1, 6.0.2 could allow a remote user to consume resources causing a denial of service due to a resource leak.

IBM 4769 Developers Toolkit 7.0.0 through 7.5.52 could allow a remote attacker to cause a denial of service in the Hardware Security Module (HSM) due to improper memory allocation of an excessive size.

IBM WebSphere Application Server Liberty 18.0.0.2 through 25.0.0.8 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5.0 - 11.5.9 and 12.1.0 - 12.1.3 is vulnerable to a denial of service as a trap may occur when selecting from certain types of tables.

IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 could allow a remote attacker to cause a denial of service due to insufficient validation of incoming request resources.

IBM Cognos Analytics 11.2.0, 11.2.1, 11.2.2, 11.2.3, 11.2.4, 12.0.0, 12.0.1, 12.0.2, 12.0.3, and 12.0.4 could allow an authenticated user to cause a denial of service by sending a specially crafted request that would exhaust memory resources.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS and 9.3 CD, in certain configurations, is vulnerable to a denial of service attack caused by an error processing messages when an API Exit using MQBUFMH is used. IBM X-Force ID: 290259.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_mem_cache.

A flaw was found in the networking subsystem of the Linux kernel within the handling of the RPL protocol. This issue results from the lack of proper handling of user-supplied data, which can lead to an assertion failure. This may allow an unauthenticated remote attacker to create a denial of service condition on the system.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_ibm_upload.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_fastcgi module.

IBM Langflow OSS 1.0.0 through 1.9.0 could allow a denial of service due to uncontrolled resource consumption.

Denial of service due to unauthenticated API endpoint. The following products are affected: Acronis Agent (Windows, macOS, Linux) before build 30161.

IBM Aspera High-Speed Transfer Endpoint 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Server 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Endpoint are affected by a potential denial of service in the asperahttpd component. An unauthenticated user can cause the asperahttpd service to crash.

Some Dahua software products have a vulnerability of unauthenticated restart of remote DSS Server. After bypassing the firewall access control policy, by sending a specific crafted packet to the vulnerable interface, an attacker could unauthenticated restart of remote DSS Server.

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when executing a specially crafted query with a small statement heap.

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to running out of memory when executing certain queries with MDC tables.

IBM Security Verify Access OIDC Provider could allow a remote user to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 238921.

IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS is vulnerable to a denial of service attack caused by specially crafted PCF or MQSC messages. IBM X-Force ID: 240832.

IBM Informix Dynamic Server 12.10,14.10, and15.0 could allow a remote attacker to cause a denial of service due to an integer underflow when processing packets.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: always filter entire AP matrix The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or domain is assigned to the mdev. The purpose of the function is to update the guest's AP configuration by filtering the matrix of adapters and domains assigned to the mdev. When an adapter or domain is assigned, only the APQNs associated with the APID of the new adapter or APQI of the new domain are inspected. If an APQN does not reference a queue device bound to the vfio_ap device driver, then it's APID will be filtered from the mdev's matrix when updating the guest's AP configuration. Inspecting only the APID of the new adapter or APQI of the new domain will result in passing AP queues through to a guest that are not bound to the vfio_ap device driver under certain circumstances. Consider the following: guest's AP configuration (all also assigned to the mdev's matrix): 14.0004 14.0005 14.0006 16.0004 16.0005 16.0006 unassign domain 4 unbind queue 16.0005 assign domain 4 When domain 4 is re-assigned, since only domain 4 will be inspected, the APQNs that will be examined will be: 14.0004 16.0004 Since both of those APQNs reference queue devices that are bound to the vfio_ap device driver, nothing will get filtered from the mdev's matrix when updating the guest's AP configuration. Consequently, queue 16.0005 will get passed through despite not being bound to the driver. This violates the linux device model requirement that a guest shall only be given access to devices bound to the device driver facilitating their pass-through. To resolve this problem, every adapter and domain assigned to the mdev will be inspected when filtering the mdev's matrix.

Jonathan Looney discovered that the TCP_SKB_CB(skb)->tcp_gso_segs value was subject to an integer overflow in the Linux kernel when handling TCP Selective Acknowledgments (SACKs). A remote attacker could use this to cause a denial of service. This has been fixed in stable kernel releases 4.4.182, 4.9.182, 4.14.127, 4.19.52, 5.1.11, and is fixed in commit 3b4929f65b0d8249f19a50245cd88ed1a2f78cff.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix WQ_MEM_RECLAIM warning When sunrpc is used, if a reset triggered, our wq may lead the following trace: workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma] is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle [hns_roce_hw_v2] WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144 Call trace: check_flush_dependency+0xe0/0x144 start_flush_work.constprop.0+0x1d0/0x2f0 __flush_work.isra.0+0x40/0xb0 flush_work+0x14/0x30 hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2] ib_destroy_qp_user+0x9c/0x2b4 rdma_destroy_qp+0x34/0xb0 rpcrdma_ep_destroy+0x28/0xcc [rpcrdma] rpcrdma_ep_put+0x74/0xb4 [rpcrdma] rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma] xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18 Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.

In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link).

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: move wait_on_sem() out of spinlock With iommu.strict=1, the existing completion wait path can cause soft lockups under stressed environment, as wait_on_sem() busy-waits under the spinlock with interrupts disabled. Move the completion wait in iommu_completion_wait() out of the spinlock. wait_on_sem() only polls the hardware-updated cmd_sem and does not require iommu->lock, so holding the lock during the busy wait unnecessarily increases contention and extends the time with interrupts disabled.

In the Linux kernel, the following vulnerability has been resolved: net: Fix rcu_tasks stall in threaded busypoll I was debugging a NIC driver when I noticed that when I enable threaded busypoll, bpftrace hangs when starting up. dmesg showed: rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old. INFO: rcu_tasks detected stalls on tasks: 00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64 task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000 Call Trace: <TASK> ? napi_threaded_poll_loop+0x27c/0x2c0 ? __pfx_napi_threaded_poll+0x10/0x10 ? napi_threaded_poll+0x26/0x80 ? kthread+0xfa/0x240 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> The cause is that in threaded busypoll, the main loop is in napi_threaded_poll rather than napi_threaded_poll_loop, where the latter rarely iterates more than once within its loop. For rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its qs state, the last_qs must be 100ms behind, and this can't happen because napi_threaded_poll_loop rarely iterates in threaded busypoll, and each time napi_threaded_poll_loop is called last_qs is reset to latest jiffies. This patch changes so that in threaded busypoll, last_qs is saved in the outer napi_threaded_poll, and whether busy_poll_last_qs is NULL indicates whether napi_threaded_poll_loop is called for busypoll. This way last_qs would not reset to latest jiffies on each invocation of napi_threaded_poll_loop.

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: monaco: Reserve full Gunyah metadata region We observe spurious "Synchronous External Abort" exceptions (ESR=0x96000010) and kernel crashes on Monaco-based platforms. These faults are caused by the kernel inadvertently accessing hypervisor-owned memory that is not properly marked as reserved. >From boot log, The Qualcomm hypervisor reports the memory range at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned: qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0 However, the EFI memory map provided by firmware only reserves the subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion (0x91a88000–0x91afffff) is incorrectly reported as conventional memory (from efi debug): efi: 0x000091a40000-0x000091a87fff [Reserved...] efi: 0x000091a88000-0x0000938fffff [Conventional...] As a result, the allocator may hand out PFNs inside the hypervisor owned region, causing fatal aborts when the kernel accesses those addresses. Add a reserved-memory carveout for the Gunyah hypervisor metadata at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not map or allocate from this area. For the record: Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC) UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1

Loop with unreachable exit condition ('infinite loop') in ASP.NET Core allows an unauthorized attacker to deny service over a network.

IBM MQ for HPE NonStop 8.1.0 is vulnerable to a denial of service attack due to an error within the CCDT and channel synchronization logic. IBM X-Force ID: 235727.

A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the handling of SMB2_LOGOFF commands. The issue results from the lack of proper validation of a pointer prior to accessing it. An attacker can leverage this vulnerability to create a denial-of-service condition on the system.

A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the handling of SMB2_TREE_CONNECT and SMB2_QUERY_INFO commands. The issue results from the lack of proper validation of a pointer prior to accessing it. An attacker can leverage this vulnerability to create a denial-of-service condition on the system.

A flaw was found in the Linux kernel's ksmbd, a high-performance in-kernel SMB server. The specific flaw exists within the handling of SMB2_SESSION_SETUP commands. The issue results from the lack of control of resource consumption. An attacker can leverage this vulnerability to create a denial-of-service condition on the system.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to denial of service with a specially crafted query on certain tables. IBM X-Force ID: 253361 .