A weakness has been identified in Totolink A3300R 17.0.0cu.557_b20221024. This issue affects the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument enable causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was identified in TRENDnet TEW-713RE up to 1.02. The impacted element is an unknown function of the file /goform/setSysAdm. The manipulation of the argument admuser leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Totolink A3600R 4.1.2cu.5182_B20201102. Affected by this issue is the function setNoticeCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument NoticeUrl results in command injection. The attack may be launched remotely. The exploit is now public and may be used.

The OBS service obs-service-download_url was vulnerable to a command injection vulnerability. The attacker could provide a configuration to the service that allowed to execute command in later steps

A vulnerability was determined in TRENDnet TEW-713RE up to 1.02. The affected element is the function sub_421494 of the file /goform/addRouting. Executing a manipulation of the argument dest can lead to command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

A weakness has been identified in Totolink A3300R 17.0.0cu.557_b20221024. Affected by this vulnerability is the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi. Executing a manipulation of the argument rxRate can lead to command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Totolink A3300R 17.0.0cu.557_b20221024. This vulnerability affects the function setSmartQosCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument qos_up_bw results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in Totolink A3300R 17.0.0cu.557_b20221024. Impacted is the function setStaticRoute of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument ip leads to command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in Totolink A3300R 17.0.0cu.557_b20221024. Affected by this issue is the function setIptvCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument vlanPriLan3 leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A vulnerability was detected in Totolink A3300R 17.0.0cu.557_b20221024. The affected element is the function setVpnPassCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. Performing a manipulation of the argument pptpPassThru results in command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.

A security flaw has been discovered in efforthye fast-filesystem-mcp up to 3.5.1. The affected element is the function handleGetDiskUsage of the file src/index.ts. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in D-Link DI-7400G+ 19.12.25A1. This affects an unknown function of the file /msp_info.htm?flag=cmd. The manipulation of the argument cmd results in command injection. The attack can be launched remotely. The exploit has been made public and could be used.

A vulnerability was identified in Totolink A3300R 17.0.0cu.557_b20221024. This affects the function setLanCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument lanIp leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

A flaw has been found in Tenda CH22 1.0.0.1. The affected element is the function FormWriteFacMac of the file /goform/WriteFacMac. Executing a manipulation of the argument mac can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability has been found in Totolink NR1800X 9.1.0u.6279_B20210910. This issue affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi of the component Telnet Service. The manipulation of the argument host_time leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Command Injection in PHPMyWind v5.6 allows remote attackers to execute arbitrary code via the "text color" field of the component '/admin/web_config.php'.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

A vulnerability was detected in pskill9 website-downloader up to 0.1.0. This affects the function download_website of the file src/index.ts of the component MCP Interface. Performing a manipulation of the argument outputPath results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

A vulnerability has been found in JD Cloud BE6500 4.4.1.r4308. This issue affects the function sub_4780 of the file /jdcapi. Such manipulation of the argument ddns_name leads to command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The Web UI in IBM Security QRadar SIEM 7.1.x before 7.1 MR2 Patch 12 allows remote authenticated users to execute unspecified OS commands via unknown vectors.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

Watchguard XCS 9.2 and 10.0 before build 150522 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the id parameter to ADMIN/mailqueue.spl.

rubygem-openshift-origin-console in Red Hat OpenShift 2.2 allows remote authenticated users to execute arbitrary commands via a crafted request to the Broker.

A security flaw has been discovered in Tenda F453 1.0.0.3. The affected element is the function FormWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in ZSPACE Z4Pro+ 1.0.0440024. Impacted is the function zfilev2_api_SafeStatus of the file /v2/file/safe/status of the component HTTP POST Request Handler. The manipulation results in command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.

In the git-tag-annotation-action (open source GitHub Action) before version 1.0.1, an attacker can execute arbitrary (*) shell commands if they can control the value of [the `tag` input] or manage to alter the value of [the `GITHUB_REF` environment variable]. The problem has been patched in version 1.0.1. If you don't use the `tag` input you are most likely safe. The `GITHUB_REF` environment variable is protected by the GitHub Actions environment so attacks from there should be impossible. If you must use the `tag` input and cannot upgrade to `> 1.0.0` make sure that the value is not controlled by another Action.

A vulnerability was found in Wavlink WL-WN578W2 221110. The impacted element is an unknown function of the file /cgi-bin/firewall.cgi of the component POST Request Handler. Performing a manipulation of the argument dmz_flag/del_flag results in command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A high severity vulnerability was found in all active versions of Red Hat CloudForms before 5.11.7.0. The out of band OS command injection vulnerability can be exploited by authenticated attacker while setuping conversion host through Infrastructure Migration Solution. This flaw allows attacker to execute arbitrary commands on CloudForms server.

A vulnerability classified as critical was found in Overtek OT-E801G OTE801G65.1.1.0. This vulnerability affects unknown code of the file /diag_ping.cmd?action=test&interface=ppp0.1&ipaddr=8.8.8.8%26%26cat%20/etc/passwd&ipversion=4&sessionKey=test. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W6-S 1.0.0.4(510). This affects the function TendaAte of the file /goform/ate of the component ATE Service. Performing a manipulation results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used.

A flaw has been found in D-Link DIR-513 1.10. The impacted element is an unknown function of the file /goform/formSysCmd. Executing a manipulation of the argument sysCmd can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

A vulnerability was found in JFinalCMS 1.0. It has been rated as critical. Affected by this issue is the function update of the file \src\main\java\com\cms\controller\admin\TemplateController.java of the component Template Handler. The manipulation of the argument content leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

OCS Inventory NG 2.7 allows Remote Command Execution via shell metacharacters to require/commandLine/CommandLine.php because mib_file in plugins/main_sections/ms_config/ms_snmp_config.php is mishandled in get_mib_oid.

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

The git hook feature in Gitea 1.1.0 through 1.12.5 might allow for authenticated remote code execution in customer environments where the documentation was not understood (e.g., one viewpoint is that the dangerousness of this feature should be documented immediately above the ENABLE_GIT_HOOKS line in the config file). NOTE: The vendor has indicated this is not a vulnerability and states "This is a functionality of the software that is limited to a very limited subset of accounts. If you give someone the privilege to execute arbitrary code on your server, they can execute arbitrary code on your server. We provide very clear warnings to users around this functionality and what it provides.

A vulnerability has been found in Trendnet TEW-657BRM 1.00.1. Affected by this issue is the function vpn_drop of the file /setup.cgi. The manipulation of the argument policy_name leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

SABnzbd 2.3.9 and 3.0.0Alpha2 has a command injection vulnerability in the web configuration interface that permits an authenticated user to execute arbitrary Python commands on the underlying operating system.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

An issue was discovered in Open-AudIT 3.2.2. There is OS Command injection in Discovery.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000v2 before 1.0.0.53, D8500 before 1.0.3.44, R6220 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.64, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6700v3 before 1.0.2.66, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7800 before 1.0.2.60, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.32.

A vulnerability has been found in didi Super-Jacoco 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /cov/triggerUnitCover. The manipulation of the argument uuid leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable.