A vulnerability was found in dayrui XunRuiCMS 4.6.3. It has been classified as critical. Affected is the function import_add of the file dayrui/Fcms/Control/Admin/Linkage.php. The manipulation leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

xunruicms up to v4.5.1 was discovered to contain a remote code execution (RCE) vulnerability in /index.php. This vulnerability allows attackers to execute arbitrary code via a crafted GET request.

A security flaw has been discovered in dayrui XunRuiCMS up to 4.7.1. Affected is an unknown function of the file /admind45f74adbd95.php?c=email&m=add of the component Email Setting Handler. Performing a manipulation results in server-side request forgery. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Unsafe deserialization vulnerability in MixPHP Framework 2.x thru 2.2.17. The session and cache handlers use unserialize() on data from the filesystem in the FileHandler object.

Moodle 1.9.x before 1.9.16, 2.0.x before 2.0.7, 2.1.x before 2.1.4, and 2.2.x before 2.2.1 does not validate e-mail address settings, which allows remote authenticated users to have an unspecified impact via a crafted address.

Deserialization of Untrusted Data vulnerability in mywebtonet PHP/MySQL CPU performance statistics mywebtonet-performancestats allows Object Injection.This issue affects PHP/MySQL CPU performance statistics: from n/a through <= 1.2.1.

Microsoft SharePoint Online Elevation of Privilege Vulnerability

cPanel before 59.9999.145 allows arbitrary code execution due to an incorrect #! in Mail::SPF scripts (SEC-152).

A vulnerability in the sendMailFromRemoteSource method in Emails.php  as used in Bitdefender GravityZone Console unsafely uses php unserialize() on user-supplied input without validation. By crafting a malicious serialized payload, an attacker can trigger PHP object injection, perform a file write, and gain arbitrary command execution on the host system.

Security vulnerability in Apache bRPC <1.5.0 on all platforms allows attackers to execute arbitrary code via ServerOptions::pid_file. An attacker that can influence the ServerOptions pid_file parameter with which the bRPC server is started can execute arbitrary code with the permissions of the bRPC process. Solution: 1. upgrade to bRPC >= 1.5.0, download link:  https://dist.apache.org/repos/dist/release/brpc/1.5.0/ https://dist.apache.org/repos/dist/release/brpc/1.5.0/ 2. If you are using an old version of bRPC and hard to upgrade, you can apply this patch:  https://github.com/apache/brpc/pull/2218 https://github.com/apache/brpc/pull/2218

OctoRPKI does not escape a URI with a filename containing "..", this allows a repository to create a file, (ex. rsync://example.org/repo/../../etc/cron.daily/evil.roa), which would then be written to disk outside the base cache folder. This could allow for remote code execution on the host machine OctoRPKI is running on.

The fix for CVE-2026-41635 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. A user is only affected if using the version out of the box with JDK 1.7u21 or below. However, this scenario can be adjusted easily to an external Xalan that works regardless of the version of the Java runtime. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

parlai is a framework for training and evaluating AI models on a variety of openly available dialogue datasets. In affected versions the package is vulnerable to YAML deserialization attack caused by unsafe loading which leads to Arbitary code execution. This security bug is patched by avoiding unsafe loader users should update to version above v1.1.0. If upgrading is not possible then users can change the Loader used to SafeLoader as a workaround. See commit 507d066ef432ea27d3e201da08009872a2f37725 for details.

SugarCRM CE <= 6.3.1 contains scripts that use "unserialize()" with user controlled input which allows remote attackers to execute arbitrary PHP code.

The affected product is vulnerable to improper input validation in the restore file. This enables an attacker to provide malicious config files to replace any file on disk.

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

The management tool in MyLittleBackup up to and including 1.7 allows remote attackers to execute arbitrary code because machineKey is hardcoded (the same for all customers' installations) in web.config, and can be used to send serialized ASP code.

The Boost plugin for WordPress is vulnerable to PHP Object Injection in versions up to, and including, 2.0.3 via deserialization of untrusted input in the STYXKEY-BOOST_USER_LOCATION cookie. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

Rundeck is an open source automation service with a web console, command line tools and a WebAPI. Prior to version 3.3.14 and version 3.4.3, an authorized user can upload a zip-format plugin with a crafted plugin.yaml, or a crafted aclpolicy yaml file, or upload an untrusted project archive with a crafted aclpolicy yaml file, that can cause the server to run untrusted code on Rundeck Community or Enterprise Edition. An authenticated user can make a POST request, that can cause the server to run untrusted code on Rundeck Enterprise Edition. The zip-format plugin issues requires authentication and authorization to these access levels, and affects all Rundeck editions:`admin` level access to the `system` resource type. The ACL Policy yaml file upload issues requires authentication and authorization to these access levels, and affects all Rundeck editions: `create` `update` or `admin` level access to a `project_acl` resource, and/or`create` `update` or `admin` level access to the `system_acl` resource. The unauthorized POST request requires authentication, but no specific authorization, and affects Rundeck Enterprise only. Patches are available in versions 3.4.3, 3.3.14

Biscom Secure File Transfer (SFT) 5.0.1000 through 5.0.1048 does not validate the dataFieldId value, and uses sequential numbers, which allows remote authenticated users to overwrite or read files via crafted requests. Version 5.0.1050 contains the fix.

A flaw was found in Moodle in versions 3.11 to 3.11.3, 3.10 to 3.10.7, 3.9 to 3.9.10 and earlier unsupported versions. A remote code execution risk when restoring backup files was identified.

A deserialization flaw was discovered in the jackson-databind, versions before 2.6.7.1, 2.7.9.1 and 2.8.9, which could allow an unauthenticated user to perform code execution by sending the maliciously crafted input to the readValue method of the ObjectMapper.

WriteRegistry function in TSSServiSign component does not filter and verify users’ input, remote attackers can rewrite to the registry without permissions thus perform hijack attacks to execute arbitrary code.

The Dubbo Provider will check the incoming request and the corresponding serialization type of this request meet the configuration set by the server. But there's an exception that the attacker can use to skip the security check (when enabled) and reaching a deserialization operation with native java serialization. Apache Dubbo 2.7.13, 3.0.2 fixed this issue by quickly fail when any unrecognized request was found.

In FreeRDP before 2.4.0 on Windows, wf_cliprdr_server_file_contents_request in client/Windows/wf_cliprdr.c has missing input checks for a FILECONTENTS_SIZE File Contents Request PDU.

Ansible before versions 2.3.1.0 and 2.4.0.0 fails to properly mark lookup-plugin results as unsafe. If an attacker could control the results of lookup() calls, they could inject Unicode strings to be parsed by the jinja2 templating system, resulting in code execution. By default, the jinja2 templating language is now marked as 'unsafe' and is not evaluated.

There is a Improper Input Validation vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may lead to malicious invoking other functions of the Smart Assistant through text messages.

The AMF unmarshallers in Red5 Media Server before 1.0.8 do not restrict the classes for which it performs deserialization, which allows remote attackers to execute arbitrary code via crafted serialized Java data.

In Apache Log4j 2.x before 2.8.2, when using the TCP socket server or UDP socket server to receive serialized log events from another application, a specially crafted binary payload can be sent that, when deserialized, can execute arbitrary code.

NVIDIA TRT-LLM for any platform contains a vulnerability in MPI server, where an attacker could cause an unsafe deserialization. A successful exploit of this vulnerability might lead to code execution, denial of service, data tampering, and information disclosure.

Due to insufficient input validation of Kyma, authenticated users can pass a Header of their choice and escalate privileges which can completely compromise the cluster.

NVIDIA TRT-LLM for any platform contains a deserialization vulnerability and unsafe serialized handle. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.

An issue was discovered in the node-serialize package 0.0.4 for Node.js. Untrusted data passed into the unserialize() function can be exploited to achieve arbitrary code execution by passing a JavaScript Object with an Immediately Invoked Function Expression (IIFE).

NVIDIA TRT-LLM for any platform contains a vulnerability in RPC testing, where an attacker could cause an unsafe deserialization. A successful exploit of this vulnerability might lead to code execution, denial of service, data tampering, and information disclosure.

QOS.ch Logback before 1.2.0 has a serialization vulnerability affecting the SocketServer and ServerSocketReceiver components.

The dashboard subscription interface in Request Tracker (RT) 4.x before 4.0.25, 4.2.x before 4.2.14, and 4.4.x before 4.4.2 might allow remote authenticated users with certain privileges to execute arbitrary code via a crafted saved search name.

Veeam Backup and Replication 10 before 10.0.1.4854 P20210609 and 11 before 11.0.0.837 P20210507 mishandles deserialization during Microsoft .NET remoting.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

Wyse Management Suite 3.3.1 and below versions contain a deserialization vulnerability that could allow an unauthenticated attacker to execute code on the affected system.

Adobe ColdFusion versions 2018u16 (and earlier), 2021u6 (and earlier) and 2023.0.0.330468 (and earlier) are affected by a Deserialization of Untrusted Data vulnerability that could result in Arbitrary code execution. Exploitation of this issue does not require user interaction.

A deserialization vulnerability existed when decode a malicious package.This issue affects Apache Dubbo: from 3.1.0 through 3.1.10, from 3.2.0 through 3.2.4. Users are recommended to upgrade to the latest version, which fixes the issue.

EMC VASA Provider Virtual Appliance versions 8.3.x and prior has an unauthenticated remote code execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges can upload a specially crafted file to bypass file extension restrictions and could lead to remote code execution.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability in the API File Option Upload Extension. An attacker with Admin privileges can achieve unrestricted file upload which can result in remote code execution.

An issue found in Peacexie Imcat v5.4 allows attackers to execute arbitrary code via the incomplete filtering function.

ThinkPHP v6.0.8 was discovered to contain a deserialization vulnerability via the component vendor\league\flysystem-cached-adapter\src\Storage\Adapter.php.

An issue in Diebold Aglis XFS for Opteva v.4.1.61.1 allows a remote attacker to execute arbitrary code via a crafted payload to the ResolveMethod() parameter.

Mirasvit Full Page Cache Warmer for Magento 2 before version 1.11.12 contains a PHP object injection vulnerability that allows unauthenticated attackers to achieve remote code execution by supplying a crafted serialized PHP object in the CacheWarmer cookie. Attackers can exploit the unrestricted call to PHP's native unserialize() function combined with gadget chains available in Magento and its dependencies to execute arbitrary code on the server.

ForgeRock AM server before 7.0 has a Java deserialization vulnerability in the jato.pageSession parameter on multiple pages. The exploitation does not require authentication, and remote code execution can be triggered by sending a single crafted /ccversion/* request to the server. The vulnerability exists due to the usage of Sun ONE Application Framework (JATO) found in versions of Java 8 or earlier