In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Flush the notify_hotplug_work When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is used.

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper.

In the Linux kernel, the following vulnerability has been resolved: regulator: dummy: force synchronous probing Sometimes I get a NULL pointer dereference at boot time in kobject_get() with the following call stack: anatop_regulator_probe() devm_regulator_register() regulator_register() regulator_resolve_supply() kobject_get() By placing some extra BUG_ON() statements I could verify that this is raised because probing of the 'dummy' regulator driver is not completed ('dummy_regulator_rdev' is still NULL). In the JTAG debugger I can see that dummy_regulator_probe() and anatop_regulator_probe() can be run by different kernel threads (kworker/u4:*). I haven't further investigated whether this can be changed or if there are other possibilities to force synchronization between these two probe routines. On the other hand I don't expect much boot time penalty by probing the 'dummy' regulator synchronously.

In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected() Add check for the return value of mgmt_alloc_skb() in mgmt_device_connected() to prevent null pointer dereference.

A NULL pointer dereference in sanei_epson_net_read in SANE Backends before 1.0.30 allows a malicious device connected to the same local network as the victim to cause a denial of service, aka GHSL-2020-075.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower]

In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet.

In the Linux kernel, the following vulnerability has been resolved: driver core: class: Fix wild pointer dereferences in API class_dev_iter_next() There are a potential wild pointer dereferences issue regarding APIs class_dev_iter_(init|next|exit)(), as explained by below typical usage: // All members of @iter are wild pointers. struct class_dev_iter iter; // class_dev_iter_init(@iter, @class, ...) checks parameter @class for // potential class_to_subsys() error, and it returns void type and does // not initialize its output parameter @iter, so caller can not detect // the error and continues to invoke class_dev_iter_next(@iter) even if // @iter still contains wild pointers. class_dev_iter_init(&iter, ...); // Dereference these wild pointers in @iter here once suffer the error. while (dev = class_dev_iter_next(&iter)) { ... }; // Also dereference these wild pointers here. class_dev_iter_exit(&iter); Actually, all callers of these APIs have such usage pattern in kernel tree. Fix by: - Initialize output parameter @iter by memset() in class_dev_iter_init() and give callers prompt by pr_crit() for the error. - Check if @iter is valid in class_dev_iter_next().

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in alloc_preauth_hash() The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete.

In the Linux kernel, the following vulnerability has been resolved: netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets When calling netlbl_conn_setattr(), addr->sa_family is used to determine the function behavior. If sk is an IPv4 socket, but the connect function is called with an IPv6 address, the function calipso_sock_setattr() is triggered. Inside this function, the following code is executed: sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL; Since sk is an IPv4 socket, pinet6 is NULL, leading to a null pointer dereference. This patch fixes the issue by checking if inet6_sk(sk) returns a NULL pointer before accessing pinet6.

In the Linux kernel, the following vulnerability has been resolved: drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init devm_kasprintf() calls can return null pointers on failure. But some return values were not checked in zynqmp_audio_init(). Add NULL check in zynqmp_audio_init(), avoid referencing null pointers in the subsequent code.

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided L1<->L2 context switch latency counters to L1 user-space via perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't assign ownership of the PMU to the module 'vpa_pmu'. Consequently the module 'vpa_pmu' can be unloaded while one of the perf-events are still active, which can lead to kernel oops and panic of the form below on a Pseries-LPAR: BUG: Kernel NULL pointer dereference on read at 0x00000058 <snip> NIP [c000000000506cb8] event_sched_out+0x40/0x258 LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0 Call Trace: [c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable) [c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0 [c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120 <snip> Kernel panic - not syncing: Aiee, killing interrupt handler! Fix this by adding the module ownership to 'vpa_pmu' so that the module 'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events are initialized.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Don't expose hw_counters outside of init net namespace Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") accidentally almost exposed hw counters to non-init net namespaces. It didn't expose them fully, as an attempt to read any of those counters leads to a crash like this one: [42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028 [42021.814463] #PF: supervisor read access in kernel mode [42021.819549] #PF: error_code(0x0000) - not-present page [42021.824636] PGD 0 P4D 0 [42021.827145] Oops: 0000 [#1] SMP PTI [42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX [42021.841697] Hardware name: XXX [42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core] [42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48 [42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287 [42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000 [42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0 [42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000 [42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530 [42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000 [42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000 [42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0 [42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42021.949324] Call Trace: [42021.951756] <TASK> [42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70 [42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0 [42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0 [42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0 [42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30 [42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core] [42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core] [42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50 [42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0 [42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410 [42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0 [42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0 [42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0 [42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2 The problem can be reproduced using the following steps: ip netns add foo ip netns exec foo bash cat /sys/class/infiniband/mlx4_0/hw_counters/* The panic occurs because of casting the device pointer into an ib_device pointer using container_of() in hw_stat_device_show() is wrong and leads to a memory corruption. However the real problem is that hw counters should never been exposed outside of the non-init net namespace. Fix this by saving the index of the corresponding attribute group (it might be 1 or 2 depending on the presence of driver-specific attributes) and zeroing the pointer to hw_counters group for compat devices during the initialization. With this fix applied hw_counters are not available in a non-init net namespace: find /sys/class/infiniband/mlx4_0/ -name hw_counters /sys/class/infiniband/mlx4_0/ports/1/hw_counters /sys/class/infiniband/mlx4_0/ports/2/hw_counters /sys/class/infiniband/mlx4_0/hw_counters ip netns add foo ip netns exec foo bash find /sys/class/infiniband/mlx4_0/ -name hw_counters

In the Linux kernel, the following vulnerability has been resolved: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw devm_kasprintf() calls can return null pointers on failure. But the return values were not checked in npcm8xx_gpio_fw(). Add NULL check in npcm8xx_gpio_fw(), to handle kernel NULL pointer dereference error.

In wlan STA driver, there is a possible system crash due to an uncaught exception. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00413200; Issue ID: MSV-3304.

An issue was discovered in dbus >= 1.3.0 before 1.12.18. The DBusServer in libdbus, as used in dbus-daemon, leaks file descriptors when a message exceeds the per-message file descriptor limit. A local attacker with access to the D-Bus system bus or another system service's private AF_UNIX socket could use this to make the system service reach its file descriptor limit, denying service to subsequent D-Bus clients.

In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix NULL pointer dereference in case of DT error in ks_pcie_setup_rc_app_regs() If IORESOURCE_MEM is not provided in Device Tree due to any error, resource_list_first_type() will return NULL and pci_parse_request_of_pci_ranges() will just emit a warning. This will cause a NULL pointer dereference. Fix this bug by adding NULL return check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

A NULL pointer dereference in Busybox's man applet leads to denial of service when a section name is supplied but no page argument is given

In wlan STA driver, there is a possible system crash due to an uncaught exception. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00412240; Issue ID: MSV-3293.

In the Linux kernel, the following vulnerability has been resolved: idpf: Fix RSS LUT NULL ptr issue after soft reset During soft reset, the RSS LUT is freed and not restored unless the interface is up. If an ethtool command that accesses the rss lut is attempted immediately after reset, it will result in NULL ptr dereference. Also, there is no need to reset the rss lut if the soft reset does not involve queue count change. After soft reset, set the RSS LUT to default values based on the updated queue count only if the reset was a result of a queue count change and the LUT was not configured by the user. In all other cases, don't touch the LUT. Steps to reproduce: ** Bring the interface down (if up) ifconfig eth1 down ** update the queue count (eg., 27->20) ethtool -L eth1 combined 20 ** display the RSS LUT ethtool -x eth1 [82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000 [82375.558373] #PF: supervisor read access in kernel mode [82375.558391] #PF: error_code(0x0000) - not-present page [82375.558408] PGD 0 P4D 0 [82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI <snip> [82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf] [82375.558786] Call Trace: [82375.558793] <TASK> [82375.558804] rss_prepare.isra.0+0x187/0x2a0 [82375.558827] rss_prepare_data+0x3a/0x50 [82375.558845] ethnl_default_doit+0x13d/0x3e0 [82375.558863] genl_family_rcv_msg_doit+0x11f/0x180 [82375.558886] genl_rcv_msg+0x1ad/0x2b0 [82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10 [82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10 [82375.558937] netlink_rcv_skb+0x58/0x100 [82375.558957] genl_rcv+0x2c/0x50 [82375.558971] netlink_unicast+0x289/0x3e0 [82375.558988] netlink_sendmsg+0x215/0x440 [82375.559005] __sys_sendto+0x234/0x240 [82375.559555] __x64_sys_sendto+0x28/0x30 [82375.560068] x64_sys_call+0x1909/0x1da0 [82375.560576] do_syscall_64+0x7a/0xfa0 [82375.561076] ? clear_bhb_loop+0x60/0xb0 [82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e <snip>

In Bluetooth driver, there is a possible system crash due to an uncaught exception. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00412256; Issue ID: MSV-3284.

In wlan STA driver, there is a possible system crash due to an uncaught exception. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00413201; Issue ID: MSV-3302.

VMware ESXi 6.5 without patch ESXi650-201707101-SG, ESXi 6.0 without patch ESXi600-201706101-SG, ESXi 5.5 without patch ESXi550-201709101-SG, Workstation (12.x before 12.5.3), Fusion (8.x before 8.5.4) contain a NULL pointer dereference vulnerability. This issue occurs when handling guest RPC requests. Successful exploitation of this issue may allow attackers with normal user privileges to crash their VMs.

A NULL pointer dereference in Busybox's hush applet leads to denial of service when processing a crafted shell command, due to missing validation after a \x03 delimiter character. This may be used for DoS under very rare conditions of filtered command input.

TensorFlow is an open source platform for machine learning. In affected versions the shape inference code for `DeserializeSparse` can trigger a null pointer dereference. This is because the shape inference function assumes that the `serialize_sparse` tensor is a tensor with positive rank (and having `3` as the last dimension). The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

A vulnerability was identified in WebAssembly Binaryen up to 125. This affects the function IRBuilder::makeLocalGet/IRBuilder::makeLocalSet/IRBuilder::makeLocalTee of the file src/wasm/wasm-ir-builder.cpp of the component IRBuilder. Such manipulation of the argument Index leads to null pointer dereference. Local access is required to approach this attack. The exploit is publicly available and might be used. The name of the patch is 6fb2b917a79578ab44cf3b900a6da4c27251e0d4. Applying a patch is advised to resolve this issue.

A vulnerability was identified in Open5GS up to 2.7.6. Affected is the function sgwc_s11_handle_create_session_request of the file src/sgwc/s11-handler.c of the component GTPv2-C F-TEID Handler. Such manipulation leads to denial of service. The attack must be carried out locally. The exploit is publicly available and might be used. The name of the patch is 465273d13ba5d47b274c38c9d1b07f04859178a1. A patch should be applied to remediate this issue.

A vulnerability has been found in Mapnik up to 4.2.0. This vulnerability affects the function mapnik::detail::mod<...>::operator of the file src/value.cpp. The manipulation leads to divide by zero. The attack needs to be performed locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A NULL pointer dereference vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).

A NULL pointer dereference was found in the Linux kernel's KVM when dirty ring logging is enabled without an active vCPU context. An unprivileged local attacker on the host may use this flaw to cause a kernel oops condition and thus a denial of service by issuing a KVM_XEN_HVM_SET_ATTR ioctl. This flaw affects Linux kernel versions prior to 5.17-rc1.

TensorFlow is an open source platform for machine learning. In affected versions the process of building the control flow graph for a TensorFlow model is vulnerable to a null pointer exception when nodes that should be paired are not. This occurs because the code assumes that the first node in the pairing (e.g., an `Enter` node) always exists when encountering the second node (e.g., an `Exit` node). When this is not the case, `parent` is `nullptr` so dereferencing it causes a crash. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

A vulnerability has been found in wasm3 up to 0.5.0. The affected element is the function NewCodePage. The manipulation leads to memory leak. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. Unfortunately, the project has no active maintainer at the moment.

A security flaw has been discovered in Open5GS up to 2.7.6. Affected by this vulnerability is the function ogs_gtp2_parse_bearer_qos in the library lib/gtp/v2/types.c of the component Bearer QoS IE Length Handler. Performing a manipulation results in denial of service. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. The patch is named 4e913d21f2c032b187815f063dbab5ebe65fe83a. To fix this issue, it is recommended to deploy a patch.

A security flaw has been discovered in lief-project LIEF up to 0.17.1. Affected by this issue is the function Parser::parse_binary of the file src/ELF/Parser.tcc of the component ELF Binary Parser. The manipulation results in null pointer dereference. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 0.17.2 can resolve this issue. The patch is identified as 81bd5d7ea0c390563f1c4c017c9019d154802978. It is recommended to upgrade the affected component.

A vulnerability was found in libarchive up to 3.7.7. It has been classified as problematic. This affects the function list of the file bsdunzip.c. The manipulation leads to null pointer dereference. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in nicbarker clay up to 0.14. This affects the function Clay__MeasureTextCached in the library clay.h. The manipulation results in null pointer dereference. The attack is only possible with local access. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A security vulnerability has been detected in ckolivas lrzip up to 0.651. This vulnerability affects the function ucompthread of the file stream.c. Such manipulation leads to null pointer dereference. The attack can only be performed from a local environment. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

** DISPUTED ** A vulnerability, which was classified as problematic, was found in Redis up to 6.2.7/7.0.5. Affected is the function sigsegvHandler of the file debug.c of the component Crash Report. The manipulation leads to denial of service. The complexity of an attack is rather high. The exploitability is told to be difficult. The real existence of this vulnerability is still doubted at the moment. Upgrading to version 6.2.8 and 7.0.6 is able to address this issue. The patch is identified as 0bf90d944313919eb8e63d3588bf63a367f020a3. It is recommended to apply a patch to fix this issue. VDB-211962 is the identifier assigned to this vulnerability. NOTE: The vendor claims that this is not a DoS because it applies to the crash logging mechanism which is triggered after a crash has occurred.

thttpd has a local DoS vulnerability via specially-crafted .htpasswd files

A flaw has been found in OFFIS DCMTK up to 3.6.9. The impacted element is the function DcmQueryRetrieveIndexDatabaseHandle::startFindRequest/DcmQueryRetrieveIndexDatabaseHandle::startMoveRequest in the library dcmqrdb/libsrc/dcmqrdbi.cc of the component dcmqrscp. This manipulation causes null pointer dereference. The attack requires local access. Upgrading to version 3.7.0 is sufficient to resolve this issue. Patch name: ffb1a4a37d2c876e3feeb31df4930f2aed7fa030. You should upgrade the affected component.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error checks in dasd_copy_pair_store() dasd_add_busid() can return an error via ERR_PTR() if an allocation fails. However, two callsites in dasd_copy_pair_store() do not check the result, potentially resulting in a NULL pointer dereference. Fix this by checking the result with IS_ERR() and returning the error up the stack.

In the Linux kernel, the following vulnerability has been resolved: vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent() Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in kobject_add_internal() in kobject_init_and_add() in mdev_type_add() in parent_create_sysfs_files(), it will return 0 and probe successfully. And when rmmod mdpy.ko, the mdpy_dev_exit() will call mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized parent->types[i] in parent_remove_sysfs_files(), and it will cause below null-ptr-deref. If mdev_type_add() fails, return the error code and kset_unregister() to fix the issue. general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? __kobject_del+0x62/0x1c0 kobject_del+0x32/0x50 parent_remove_sysfs_files+0xd6/0x170 [mdev] mdev_unregister_parent+0xfb/0x190 [mdev] ? mdev_register_parent+0x270/0x270 [mdev] ? find_module_all+0x9d/0xe0 mdpy_dev_exit+0x17/0x63 [mdpy] __do_sys_delete_module.constprop.0+0x2fa/0x4b0 ? module_flags+0x300/0x300 ? __fput+0x4e7/0xa00 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fbc813221b7 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0 </TASK> Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en() dom->sdev is equal to NULL, which leads to null dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.