A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted commands sent through the PubNub service can cause a stack-based buffer overflow overwriting arbitrary data. An attacker should send an authenticated HTTP request to trigger this vulnerability. At 0x9d01ef24 the value for the s_offset key is copied using strcpy to the buffer at $sp+0x2b0. This buffer is 32 bytes large, sending anything longer will cause a buffer overflow.

Stack-based buffer overflow in WFTPSRV.exe in WinFTP 2.3.0 allows remote authenticated users to execute arbitrary code via a long LIST argument beginning with an * (asterisk) character.

Multiple buffer overflows in Rumpus before 6.0.1 allow remote attackers to (1) cause a denial of service (segmentation fault) via a long HTTP verb in the HTTP component; and allow remote authenticated users to execute arbitrary code via a long argument to the (2) MKD, (3) XMKD, (4) RMD, and other unspecified commands in the FTP component.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formIpGroupConfig. Executing a manipulation of the argument groupName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple buffer overflows in freeSSHd 1.2.1 allow remote authenticated users to cause a denial of service (crash) and execute arbitrary code via a long (1) open, (2) unlink, (3) mkdir, (4) rmdir, or (5) stat SFTP command.

Buffer overflow in IMAP service in MDaemon 6.7.5 and earlier allows remote authenticated users to cause a denial of service (crash) and execute arbitrary code via a CREATE command with a long mailbox name.

Heap-based buffer overflow in Microsoft SQL Server 2000 SP4, 8.00.2050, 8.00.2039, and earlier; SQL Server 2000 Desktop Engine (MSDE 2000) SP4; SQL Server 2005 SP2 and 9.00.1399.06; SQL Server 2000 Desktop Engine (WMSDE) on Windows Server 2003 SP1 and SP2; and Windows Internal Database (WYukon) SP2 allows remote authenticated users to cause a denial of service (access violation exception) or execute arbitrary code by calling the sp_replwritetovarbin extended stored procedure with a set of invalid parameters that trigger memory overwrite, aka "SQL Server sp_replwritetovarbin Limited Memory Overwrite Vulnerability."

A vulnerability was found in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formP2PLimitConfig. Performing a manipulation of the argument except results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT HiPER 810G up to 1.7.7-171114. Affected by this vulnerability is the function strcpy of the file /goform/formFireWall of the component Management Interface. The manipulation of the argument GroupName results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/formSyslogConf. The manipulation of the argument ServerIp results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in the data management protocol in Symantec Backup Exec for Windows Servers 11.0 (aka 11d) builds 6235 and 7170, 12.0 build 1364, and 12.5 build 2213 allows remote authenticated users to cause a denial of service (application crash) and possibly execute arbitrary code via unknown vectors. NOTE: this can be exploited by unauthenticated remote attackers by leveraging CVE-2008-5407.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTimeGroupConfig. The manipulation of the argument year1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Xen through 4.9.x. Grant copying code made an implication that any grant pin would be accompanied by a suitable page reference. Other portions of code, however, did not match up with that assumption. When such a grant copy operation is being done on a grant of a dying domain, the assumption turns out wrong. A malicious guest administrator can cause hypervisor memory corruption, most likely resulting in host crash and a Denial of Service. Privilege escalation and information leaks cannot be ruled out.

Stack-based buffer overflow in freeSSHd 1.2.1 allows remote authenticated users to cause a denial of service (service crash) and potentially execute arbitrary code via a long argument to the (1) rename and (2) realpath parameters.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the arg4 and arg9 parameters of several functionalities of the web application that would allow an authenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/formPolicyRouteConf. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Content Navigator 3.0.0, 3.0.1, 3.0.2, 3.0.3, 3.0.4, 3.0.5, 3.0.6, 3.0.7, 3.0.8, 3.0.9, 3.0.10, 3.0.11, and 3.0.12 is vulnerable to missing authorization and could allow an authenticated user to load external plugins and execute code. IBM X-Force ID: 238805.

A weakness has been identified in D-Link DI-8400 16.07.26A1. The affected element is the function yyxz_dlink_asp of the file /yyxz.asp. This manipulation of the argument ID causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited.

NVIDIA BMC contains a vulnerability in libwebsocket, where an authorized attacker can cause a buffer overflow and cause a denial of service or gain code execution.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/ConfigExceptMSN. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in UTT 进取 520W 1.7.7-180627. This impacts the function strcpy of the file /goform/ConfigWirelessBase. Performing a manipulation of the argument ssid results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in TOTOLINK A3700R 9.1.2u.5822_B20200513. This affects the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. Executing a manipulation of the argument ssid can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

Stack-based buffer overflow in the SFTP subsystem in GoodTech SSH 6.4 allows remote authenticated users to execute arbitrary code via a long string to the (1) open (aka SSH_FXP_OPEN), (2) unlink, (3) opendir, and other unspecified parameters.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formWebAuthGlobalConfig. Performing a manipulation results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

NVIDIA BMC contains a vulnerability in IPMI handler, where an authorized attacker can cause a buffer overflow, which may lead to code execution, denial of service or escalation of privileges.

A flaw has been found in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/ConfigExceptQQ. Executing a manipulation can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formFireWall. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ak, which has a size of 16 bytes. An attacker can send an arbitrarily long "ak" parameter in order to exploit this vulnerability.

A vulnerability was determined in Totolink LR350 9.3.5u.6369_B20220309. Affected by this issue is the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ssid causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigExceptAli. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this vulnerability is the function strcpy of the file /goform/formConfigNoticeConfig. The manipulation of the argument timestart leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Totolink LR350 9.3.5u.6369_B20220309. This vulnerability affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Performing a manipulation of the argument ssid results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. Affected is the function strcpy of the file /goform/APSecurity. Executing a manipulation of the argument wepkey1 can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Totolink LR350 9.3.5u.6369_B20220309. Affected by this vulnerability is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ad_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "ad_r" parameter in order to exploit this vulnerability.

In CODESYS Control in multiple versions a improper restriction of operations within the bounds of a memory buffer allow an remote attacker with user privileges to gain full access of the device.

A vulnerability was determined in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formConfigFastDirectionW. This manipulation of the argument ssid causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in the server in OpenTTD 0.6.1 and earlier allows remote authenticated users to cause a denial of service (persistent game disruption) or possibly execute arbitrary code via vectors involving many long names for "companies and clients."

A vulnerability was detected in Totolink NR1800X 9.1.0u.6279_B20210910. Impacted is the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Performing a manipulation of the argument ssid results in buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A security flaw has been discovered in Totolink A3600R 5.9c.4959. This issue affects the function setAppEasyWizardConfig in the library /lib/cste_modules/app.so. Performing a manipulation of the argument apcliSsid results in buffer overflow. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

Stack-based buffer overflow in Oracle Net Services for Oracle Database Server 9i release 2 and earlier allows attackers to execute arbitrary code via a "CREATE DATABASE LINK" query containing a connect string with a long USING parameter.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

ProFTPD 1.2.7 through 1.2.9rc2 does not properly translate newline characters when transferring files in ASCII mode, which allows remote attackers to execute arbitrary code via a buffer overflow using certain files.

A vulnerability was identified in Totolink LR350 9.3.5u.6369_B20220309. This affects the function setWiFiEasyCfg of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument ssid leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

Stack buffer overflow in httpd in Asuswrt-Merlin firmware 380.67_0RT-AC5300 and earlier for ASUS devices and ASUS firmware for ASUS RT-AC5300, RT_AC1900P, RT-AC68U, RT-AC68P, RT-AC88U, RT-AC66U, RT-AC66U_B1, RT-AC58U, RT-AC56U, RT-AC55U, RT-AC52U, RT-AC51U, RT-N18U, RT-N66U, RT-N56U, RT-AC3200, RT-AC3100, RT_AC1200GU, RT_AC1200G, RT-AC1200, RT-AC53, RT-N12HP, RT-N12HP_B1, RT-N12D1, RT-N12+, RT_N12+_PRO, RT-N16, and RT-N300 devices allows remote attackers to execute arbitrary code on the router by sending a crafted http GET request packet that includes a long delete_offline_client parameter in the url.

A remote code execution vulnerability was found in the firmware used in some Lenovo printers, which can be caused by a remote user pushing an illegal string to the server-side interface via a script, resulting in a stack overflow.

A vulnerability was detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This impacts the function portRangeForwardAdd of the file /goform/portRangeForwardAdd. The manipulation of the argument ruleName/schedule/inboundFilter/TCPPorts/UDPPorts results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function sta_wps_pin of the file /goform/sta_wps_pin. Performing manipulation of the argument Ssid results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.