A weakness has been identified in UTT 1200GW up to 3.0.0-170831. The affected element is an unknown function of the file /goform/formConfigDnsFilterGlobal. This manipulation of the argument GroupName causes buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in UTT 1250GW up to v2v3.2.2-200710. Affected by this vulnerability is the function strcpy of the file /goform/aspChangeChannel. The manipulation of the argument pvid leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 1200GW and 1250GW up to 3.0.0-170831/3.2.2-200710. This vulnerability affects unknown code of the file /goform/formApMail. The manipulation of the argument senderEmail leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in UTT 1250GW up to v2v3.2.2-200710. Affected is the function strcpy of the file /goform/formUserStatusRemark. This manipulation of the argument Username causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in UTT HiPER 840G up to 3.1.1-190328. Affected by this issue is the function strcpy of the file /goform/formTaskEdit. The manipulation of the argument txtMin2 leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in UTT HiPER 840G up to 3.1.1-190328. Impacted is an unknown function of the file /goform/getOneApConfTempEntry. The manipulation of the argument tempName results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT 750W up to 3.2.2-191225. This issue affects some unknown processing of the file /goform/formPictureUrl. Executing manipulation of the argument importpictureurl can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UTT 1200GW up to 3.0.0-170831. Affected by this issue is some unknown functionality of the file /goform/ConfigWirelessBase. This manipulation of the argument ssid causes buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 1200GW up to 3.0.0-170831. This affects the function sub_4B48F8 of the file /goform/formApLbConfig. Such manipulation of the argument loadBalanceNameOld leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 1250GW up to 3.2.2-200710. This vulnerability affects the function sub_453DC of the file /goform/formConfigApConfTemp. Performing manipulation results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/ConfigExceptQQ. Executing a manipulation can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formIpGroupConfig. Executing a manipulation of the argument groupName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT HiPER 810G up to 1.7.7-171114. Affected by this vulnerability is the function strcpy of the file /goform/formFireWall of the component Management Interface. The manipulation of the argument GroupName results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/formSyslogConf. The manipulation of the argument ServerIp results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/formPolicyRouteConf. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formP2PLimitConfig. Performing a manipulation of the argument except results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTimeGroupConfig. The manipulation of the argument year1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT HiPER 810 1.7.4-141218. The impacted element is the function strcpy of the file /goform/setSysAdm. This manipulation of the argument passwd1 causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A vulnerability was identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formFireWall. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/ConfigExceptMSN. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in UTT 进取 520W 1.7.7-180627. This impacts the function strcpy of the file /goform/ConfigWirelessBase. Performing a manipulation of the argument ssid results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formConfigFastDirectionW. This manipulation of the argument ssid causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. Affected is the function strcpy of the file /goform/APSecurity. Executing a manipulation of the argument wepkey1 can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigExceptAli. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formWebAuthGlobalConfig. Performing a manipulation results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this vulnerability is the function strcpy of the file /goform/formConfigNoticeConfig. The manipulation of the argument timestart leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in UTT HiPER 840G up to 3.1.1-190328. This issue affects some unknown processing of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in UTT 进取 750W up to 3.2.2-191225. This affects an unknown part of the file /goform/Fast_wireless_conf. The manipulation of the argument ssid leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in UTT HiPER 840G up to 3.1.1-190328. This vulnerability affects unknown code of the file /goform/websWhiteList. The manipulation of the argument addHostFilter leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in UTT HiPER 840G up to 3.1.1-190328. This affects an unknown part of the file /goform/aspApBasicConfigUrcp. The manipulation of the argument Username leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT HiPER 840G up to 3.1.1-190328. It has been rated as critical. Affected by this issue is some unknown functionality of the file /goform/aspRemoteApConfTempSend. The manipulation of the argument remoteSrcTemp leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT HiPER 840G up to 3.1.1-190328. It has been rated as critical. This issue affects the function sub_484E40 of the file /goform/formP2PLimitConfig of the component API. The manipulation of the argument except leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT HiPER 840G up to 3.1.1-190328. It has been classified as critical. This affects the function strcpy of the file /goform/setSysAdm of the component API. The manipulation of the argument passwd1 leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT HiPER 840G up to 3.1.1-190328. It has been declared as critical. This vulnerability affects the function sub_416928 of the file /goform/formConfigDnsFilterGlobal of the component API. The manipulation of the argument GroupName leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 750W up to 5.0. It has been classified as critical. This affects the function strcpy of the file /goform/setSysAdm of the component API. The manipulation of the argument passwd1 leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTaskEdit. Executing a manipulation of the argument selDateType can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in the send_control_msg function in hw/char/virtio-serial-bus.c in QEMU before 2.4.0 allows guest users to cause a denial of service (QEMU process crash) via a crafted virtio control message.

In SwDcpItg of up_L2commonPdcpSecurity.cpp, there is a possible denial of service due to an incorrect bounds check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

A vulnerability was found in Netgear R6900 1.0.1.26_1.0.20. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file upgrade_check.cgi of the component HTTP Header Handler. The manipulation of the argument Content-Length leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

IBM DB2 Merge Backup for Linux, UNIX and Windows 12.1.0.0 could allow an authenticated user to cause the program to crash due to a buffer being overwritten when it is allocated on the stack.

IBM DB2 High Performance Unload 6.1.0.3, 5.1.0.1, 6.1.0.2, 6.5, 6.5.0.0 IF1, 6.1.0.1, 6.1, and 5.1 could allow an authenticated user to cause the program to crash due to a buffer being overwritten when it is allocated on the stack.

The Gluster file system through versions 3.12 and 4.1.4 is vulnerable to a buffer overflow in the 'features/index' translator via the code handling the 'GF_XATTR_CLRLK_CMD' xattr in the 'pl_getxattr' function. A remote authenticated attacker could exploit this on a mounted volume to cause a denial of service.

AimOne Video Converter 2.04 Build 103 contains a buffer overflow vulnerability in its registration form that causes application crashes. Attackers can generate a 7000-byte payload to trigger the denial of service and potentially exploit the software's registration mechanism.

An Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in the management daemon (mgd) process of Juniper Networks Junos OS and Junos OS Evolved allows a network-based authenticated low-privileged attacker, by executing a specific command via NETCONF, to cause a CPU Denial of Service to the device's control plane. This issue affects: Juniper Networks Junos OS * All versions prior to 20.4R3-S7; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S2; * 22.2 versions prior to 22.2R3; * 22.3 versions prior to 22.3R2-S1, 22.3R3; * 22.4 versions prior to 22.4R1-S2, 22.4R2. Juniper Networks Junos OS Evolved * All versions prior to 21.4R3-S4-EVO; * 22.1 versions prior to 22.1R3-S2-EVO; * 22.2 versions prior to 22.2R3-EVO; * 22.3 versions prior to 22.3R3-EVO; * 22.4 versions prior to 22.4R2-EVO. An indicator of compromise can be seen by first determining if the NETCONF client is logged in and fails to log out after a reasonable period of time and secondly reviewing the WCPU percentage for the mgd process by running the following command: mgd process example: user@device-re#> show system processes extensive | match "mgd|PID" | except last PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND 92476 root 100 0 500M 89024K CPU3 3 57.5H 89.60% mgd <<<<<<<<<<< review the high cpu percentage. Example to check for NETCONF activity: While there is no specific command that shows a specific session in use for NETCONF, you can review logs for UI_LOG_EVENT with "client-mode 'netconf'" For example: mgd[38121]: UI_LOGIN_EVENT: User 'root' login, class 'super-user' [38121], ssh-connection '10.1.1.1 201 55480 10.1.1.2 22', client-mode 'netconf'

A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes. We have already fixed the vulnerability in the following versions: QTS 5.2.5.3145 build 20250526 and later QuTS hero h5.2.5.3138 build 20250519 and later

The buffer overflow vulnerability in the CGI program of the VMG3625-T50B firmware version V5.50(ABPM.8)C0 could allow an authenticated remote attacker to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device.

Sante PACS Server Web Portal DCM File Parsing Memory Corruption Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Sante PACS Server. Authentication is required to exploit this vulnerability. The specific flaw exists within the parsing of DCM files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-25305.