In Slican telephone exchanges it is possible to manage the control panel remotely. An unauthenticated attacker can connect to the modem via a telephone with a specific caller ID. This allows them to bypass admin authentication and gain full access to the service protocol and configuration panel. This vulnerability is independent of the telephone exchanges configuration. If remote access is disabled, calling with this caller ID will temporarily enable it. This issue was fixed in versions below: - IPL-256: version 6.61.0040 - IPM-032: version 6.61.0040 - CCT-1668: version 6.56.0430 - MAC-6400: version 6.56.0430 - CXS-0424: version 6.30.0510 The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below: - CCT-1668 (CCT1CPU) - MAC-6400 - CXS-0424 These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading.

Slican telephone exchanges allow administrative protocol authentication bypass. An attacker can bypass the need to enter login credentials by executing the appropriate command. This issue was fixed in versions below: - NCP: version 1.24.0250 - IPx series: version 6.61.0040 - CCT-1668: version 6.56.0430 - MAC-6400: version 6.56.0430 - CXS-0424: version 6.30.0510 The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below: - CCT-1668 (CCT1CPU) - MAC-6400 - CXS-0424 These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading.

Flowise is a drag & drop user interface to build a customized large language model flow. In version 3.0.5 and earlier, the `forgot-password` endpoint in Flowise returns sensitive information including a valid password reset `tempToken` without authentication or verification. This enables any attacker to generate a reset token for arbitrary users and directly reset their password, leading to a complete account takeover (ATO). This vulnerability applies to both the cloud service (`cloud.flowiseai.com`) and self-hosted/local Flowise deployments that expose the same API. Commit 9e178d68873eb876073846433a596590d3d9c863 in version 3.0.6 secures password reset endpoints. Several recommended remediation steps are available. Do not return reset tokens or sensitive account details in API responses. Tokens must only be delivered securely via the registered email channel. Ensure `forgot-password` responds with a generic success message regardless of input, to avoid user enumeration. Require strong validation of the `tempToken` (e.g., single-use, short expiry, tied to request origin, validated against email delivery). Apply the same fixes to both cloud and self-hosted/local deployments. Log and monitor password reset requests for suspicious activity. Consider multi-factor verification for sensitive accounts.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to execute arbitrary commands, read or upload container image files, or perform a cross-site request forgery attack. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to execute arbitrary commands, read or upload container image files, or perform a cross-site request forgery attack. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to execute arbitrary commands, read or upload container image files, or perform a cross-site request forgery attack. For more information about these vulnerabilities, see the Details section of this advisory.

An authentication bypass vulnerability exists in GFI Kerio Control 9.4.5 due to insecure default proxy configuration and weak access control in the GFIAgent service. The non-transparent proxy on TCP port 3128 can be used to forward unauthenticated requests to internal services such as GFIAgent, bypassing firewall restrictions and exposing internal management endpoints. This enables unauthenticated attackers to access the GFIAgent service on ports 7995 and 7996, retrieve the appliance UUID, and issue administrative requests via the proxy. Exploitation results in full administrative access to the Kerio Control appliance.

The administrative web server component of TIBCO Software Inc.'s TIBCO ActiveMatrix BPM, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric, TIBCO ActiveMatrix Policy Director, TIBCO ActiveMatrix Service Bus, TIBCO ActiveMatrix Service Grid, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric, TIBCO Silver Fabric Enabler for ActiveMatrix BPM, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid contains a vulnerability that could theoretically allow an unauthenticated user to download a file with credentials information. Affected releases are TIBCO Software Inc.'s TIBCO ActiveMatrix BPM: versions up to and including 4.2.0, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric: versions up to and including 4.2.0, TIBCO ActiveMatrix Policy Director: versions up to and including 1.1.0, TIBCO ActiveMatrix Service Bus: versions up to and including 3.3.0, TIBCO ActiveMatrix Service Grid: versions up to and including 3.3.1, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric: versions up to and including 3.3.0, TIBCO Silver Fabric Enabler for ActiveMatrix BPM: versions up to and including 1.4.1, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid: versions up to and including 1.3.1.

A vulnerability classified as critical has been found in code-projects Laundry System 1.0. This affects an unknown part of the file /data/. The manipulation leads to missing authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

The WP Maps Pro plugin for WordPress is vulnerable to Privilege Escalation via Administrator Account Creation in all versions up to, and including, 6.1.0. This is due to the wpgmp_temp_access_ajax AJAX action being registered with wp_ajax_nopriv_ and protected only by a nonce check using the fc-call-nonce nonce, which is publicly embedded into every frontend page via wp_localize_script as the nonce field of the wpgmp_local JavaScript object, rendering the check ineffective as an access control mechanism. This makes it possible for unauthenticated attackers to invoke the wpgmp_temp_access_support handler with check_temp=false, which unconditionally creates a new WordPress user with the hardcoded role of administrator via wp_insert_user() and returns a magic login URL that, when visited, calls wp_set_auth_cookie() to fully authenticate the attacker as the newly created administrator, resulting in complete site takeover.

An unauthenticated arbitrary file upload vulnerability exists in Idera Up.Time Monitoring Station versions up to and including 7.2. The `wizards/post2file.php` script accepts arbitrary POST parameters, allowing attackers to upload crafted PHP files to the webroot. Successful exploitation results in remote code execution as the web server user. NOTE: The bypass for this vulnerability is tracked as CVE-2015-9263.

The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps. This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication: - Re-configure Access Managers (e.g. remove alarming system requirements) - Freely re-configure the inputs and outputs - Open all connected doors permanently - Open all doors for a defined time interval - Change the admin password - and many more Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet.

The Cognex 3D-A1000 Dimensioning System in firmware version 1.0.3 (3354) and prior is vulnerable to CWE-306: Missing Authentication for Critical Function, which allows unauthorized users to change the operator account password via webserver commands by monitoring web socket communications from an unauthenticated session. This could allow an attacker to escalate privileges to match those of the compromised account.

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all 12.1.x and 11.6.x versions, undisclosed requests may bypass iControl REST authentication. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

A remote code execution vulnerability in GFI Kerio Control 9.4.5 allows attackers with administrative access to upload and execute arbitrary code through the firmware upgrade feature. The system upgrade mechanism accepts unsigned .img files, which can be modified to include malicious scripts within the upgrade.sh or disk image components. These modified upgrade images are not validated for authenticity or integrity, and are executed by the system post-upload, enabling root access.

Taiko AG1000-01A SMS Alert Gateway Rev 7.3 and Rev 8 contains an authentication bypass vulnerability in the embedded web configuration interface that allows unauthenticated attackers to access internal application pages without any session management or server-side authentication checks. Attackers with network access can directly request internal resources such as index.zhtml, point.zhtml, and log.shtml to gain full administrative read and write access, enabling unauthorized modification of alarm routing, device configuration, and disruption of monitoring and control functions.

Multiple Version of TRUMPF TruTops products expose a service function without necessary authentication. Execution of this function may result in unauthorized access to change of data or disruption of the whole service.

An unauthenticated remote command execution vulnerability exists in Samsung WLAN AP WEA453e firmware prior to version 5.2.4.T1 via improper input validation in the “Tech Support” diagnostic functionality. The command1 and command2 POST or GET parameters accept arbitrary shell commands that are executed with root privileges on the underlying operating system. An attacker can exploit this by crafting a request that injects shell commands to create output files in writable directories and then access their contents via the download endpoint. This flaw allows complete compromise of the device without authentication. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-04 UTC.

The MQTT broker embedded in Yarbo firmware v2.3.9 is configured to allow anonymous connections with no topic-level read or write ACLs. Any host on the same network can subscribe to sensitive telemetry topics or publish control messages directly to the robot without authentication or authorization of any kind.

The SiteGround Security plugin for WordPress is vulnerable to authentication bypass that allows unauthenticated users to log in as administrative users due to missing identity verification on the 2FA back-up code implementation that logs users in upon success. This affects versions up to, and including, 1.2.5.

The SiteGround Security plugin for WordPress is vulnerable to authentication bypass that allows unauthenticated users to log in as administrative users due to missing identity verification on initial 2FA set-up that allows unauthenticated and unauthorized users to configure 2FA for pending accounts. Upon successful configuration, the attacker is logged in as that user without access to a username/password pair which is the expected first form of authentication. This affects versions up to, and including, 1.2.5.

A remote code execution vulnerability exists in multiple Netcore and Netis routers models with firmware released prior to August 2014 due to the presence of an undocumented backdoor listener on UDP port 53413. Exact version boundaries remain undocumented. An unauthenticated remote attacker can send specially crafted UDP packets to execute arbitrary commands on the affected device. This backdoor uses a hardcoded authentication mechanism and accepts shell commands post-authentication. Some device models include a non-standard implementation of the `echo` command, which may affect exploitability.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.2.169 and Application prior to version 25.2.1518 (VA/SaaS deployments) expose every internal Docker container to the network because firewall rules allow unrestricted traffic to the Docker bridge network. Because no authentication, ACL or client‑side identifier is required, the attacker can interact with any internal API, bypassing the product’s authentication mechanisms entirely. The result is unauthenticated remote access to internal services, allowing credential theft, configuration manipulation and potential remote code execution. This vulnerability has been identified by the vendor as: V-2025-002 — Authentication Bypass - Docker Instances.

WordPress MStore API 2.0.6 contains an arbitrary file upload vulnerability that allows unauthenticated attackers to upload malicious files by sending POST requests to the REST API endpoint. Attackers can upload PHP files with arbitrary names to the config_file endpoint to achieve remote code execution on the server.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA/SaaS deployments) expose internal Docker containers through the gw Docker instance. The gateway publishes a /meta endpoint which lists every micro‑service container together with version information. These containers are reachable directly over HTTP/HTTPS without any access‑control list (ACL), authentication or rate‑limiting. Consequently, any attacker on the LAN or the Internet can enumerate all internal services and their versions, interact with the exposed APIs of each microservice as an unauthenticated user, or issue malicious requests that may lead to information disclosure, privilege escalation within the container, or denial‑of‑service of the entire appliance. The root cause is the absence of authentication and network‑level restrictions on the API‑gateway’s proxy to internal Docker containers, effectively turning the internal service mesh into a public attack surface. This vulnerability has been identified by the vendor as: V-2024-030 — Exposed Internal Docker Instance (LAN).

Unified Remote 3.9.0.2463 contains a remote code execution vulnerability that allows attackers to send crafted network packets to execute arbitrary commands. Attackers can exploit the service by connecting to port 9512 and sending specially crafted packets to open a command prompt and download and execute malicious payloads.

OpenCATS 0.9.4 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary commands by uploading malicious PHP files disguised as resume attachments. Attackers can upload PHP payloads through the careers job application endpoint and execute system commands via POST requests to the uploaded file in the upload directory.

Selea Targa IP OCR-ANPR Camera contains a hard-coded developer password vulnerability that allows unauthorized configuration access through an undocumented page. Attackers can exploit the hidden endpoint by using the hard-coded password 'Selea781830' to enable configuration upload and overwrite device settings.

https://gitee.com/mingSoft/MCMS MCMS <=5.2.5 is affected by: RCE. The impact is: execute arbitrary code (remote). The attack vector is: ${"freemarker.template.utility.Execute"?new()("calc")}. ¶¶ MCMS has a pre-auth RCE vulnerability through which allows unauthenticated attacker with network access via http to compromise MCMS. Successful attacks of this vulnerability can result in takeover of MCMS.

A missing authentication for critical function vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to access deployment functionality without prior authentication.

An unauthenticated remote code execution vulnerability exists in Remote for Mac, a macOS remote control utility developed by Aexol Studio, in versions up to and including 2025.7. When the application is configured with authentication disabled (i.e., the "Allow unknown devices" option is enabled), the /api/executeScript endpoint is exposed without access control. This allows unauthenticated remote attackers to inject arbitrary AppleScript payloads via the X-Script HTTP header, resulting in code execution using do shell script. Successful exploitation grants attackers the ability to run arbitrary commands on the macOS host with the privileges of the Remote for Mac background process.

An issue regarding missing authentication for certain utilities exists in CyberPower PowerPanel Enterprise prior to v2.8.3. An unauthenticated remote attacker can access the PDNU REST APIs, which may result in compromise of the application.

AVideo versions prior to 20.1 with the ImageGallery plugin enabled is vulnerable to unauthenticated file upload and deletion. Plugin endpoints responsible for managing gallery images fail to enforce authentication checks and do not validate ownership, allowing unauthenticated attackers to upload or delete images associated with any image-based video.

Newforma Info Exchange (NIX) accepts serialized .NET data via the '/remoteweb/remote.rem' endpoint, allowing a remote, unauthenticated attacker to execute arbitrary code with 'NT AUTHORITY\NetworkService' privileges. The vulnerable endpoint is used by Newforma Project Center Server (NPCS), so a compromised NIX system can be used to attack an associated NPCS system. To mitigate this vulnerability, restrict network access to the '/remoteweb/remote.rem' endpoint, for example using the IIS URL Rewrite Module.

In Totolink A3100R V5.9c.4577, multiple pages can be read by curl or Burp Suite without authentication. Additionally, admin configurations can be set without cookies.

The Quantenna Wi-Fi chips ship with an unauthenticated telnet interface by default. This is an instance of CWE-306, "Missing Authentication for Critical Function," and is estimated as a CVSS 9.1 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N). This issue affects Quantenna Wi-Fi chipset through version 8.0.0.28 of the latest SDK, and appears to be unpatched at the time of this CVE record's first publishing, though the vendor has released a best practices guide for implementors of this chipset.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1026 and Application prior to version 20.0.2702 (VA deployments only) expose a set of unauthenticated REST API endpoints that return configuration files and clear‑text passwords. The same endpoints also disclose the Laravel APP_KEY used for cryptographic signing. Because the APP_KEY is required to generate valid signed requests, an attacker who obtains it can craft malicious payloads that are accepted by the application and achieve remote code execution on the appliance. This vulnerability has been identified by the vendor as: V-2024-018 — RCE & Leaks via API.

An issue was discovered in Cicool builder 3.4.4 allowing attackers to reset the administrator's password via the /administrator/auth/reset_password endpoint.

Webhood is a self-hosted URL scanner used analyzing phishing and malicious sites. Webhood's backend container images in versions 0.9.0 and earlier are subject to Missing Authentication for Critical Function vulnerability. This vulnerability allows an unauthenticated attacker to send a HTTP request to the database (Pocketbase) admin API to create an admin account. The Pocketbase admin API does not check for authentication/authorization when creating an admin account when no admin accounts have been added. In its default deployment, Webhood does not create a database admin account. Therefore, unless users have manually created an admin account in the database, an admin account will not exist in the deployment and the deployment is vulnerable. Versions starting from 0.9.1 are patched. The patch creates a randomly generated admin account if admin accounts have not already been created i.e. the vulnerability is exploitable in the deployment. As a workaround, users can disable access to URL path starting with `/api/admins` entirely. With this workaround, the vulnerability is not exploitable via network.

Gladinet Triofox Cloud Server Agent Access Service (GladServerAgentService.exe) listens on TCP port 7878 and processes remote HTTP messages with URL paths starting with /resources, /status, /sysinfo, /woshome, /Settings, /schedule, or /DavCache.

A missing authentication vulnerability in Trend Micro Worry-Free Business Security Services (WFBSS) agent could have allowed an unauthenticated attacker to remotely take control of the agent on affected installations. Also note: this vulnerability only affected the SaaS client version of WFBSS only, meaning the on-premise version of Worry-Free Business Security was not affected, and this issue was addressed in a WFBSS monthly maintenance update. Therefore no other customer action is required to mitigate if the WFBSS agents are on the regular SaaS maintenance deployment schedule and this disclosure is for informational purposes only.

An unauthenticated command injection vulnerability exists in WePresent WiPG-1000 firmware versions prior to 2.2.3.0, due to improper input handling in the undocumented /cgi-bin/rdfs.cgi endpoint. The Client parameter is not sanitized before being passed to a system call, allowing an unauthenticated remote attacker to execute arbitrary commands as the web server user.

Zoho ManageEngine ServiceDesk Plus before 11306, ServiceDesk Plus MSP before 10530, and SupportCenter Plus before 11014 are vulnerable to unauthenticated remote code execution. This is related to /RestAPI URLs in a servlet, and ImportTechnicians in the Struts configuration.

Emerson Dixell XWEB-500 products are affected by arbitrary file write vulnerability in /cgi-bin/logo_extra_upload.cgi, /cgi-bin/cal_save.cgi, and /cgi-bin/lo_utils.cgi. An attacker will be able to write any file on the target system without any kind of authentication mechanism, and this can lead to denial of service and potentially remote code execution. Note: the product has not been supported since 2018 and should be removed or replaced

Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1026 and Application prior to version 20.0.2702 (only VA deployments) expose an unauthenticated firmware-upload flow: a public page returns a signed token usable at va-api/v1/update, and every Docker image contains the appliance’s private GPG key and hard-coded passphrase. An attacker who extracts the key and obtains a token can decrypt, modify, re-sign, upload, and trigger malicious firmware, gaining remote code execution. This vulnerability has been identified by the vendor as: V-2024-020 — Remote Code Execution.

In Apache APISIX Dashboard before 2.10.1, the Manager API uses two frameworks and introduces framework `droplet` on the basis of framework `gin`, all APIs and authentication middleware are developed based on framework `droplet`, but some API directly use the interface of framework `gin` thus bypassing the authentication.

An issue was discovered in Reprise RLM 14.2. Because /goform/change_password_process does not verify authentication or authorization, an unauthenticated user can change the password of any existing user. This allows an attacker to change the password of any known user, thereby preventing valid users from accessing the system and granting the attacker full access to that user's account.

A vulnerability is in the 'wx.html' page of the WAVLINK AC1200, version WAVLINK-A42W-1.27.6-20180418, which can allow a remote attacker to access this page without any authentication. When an unauthorized user accesses this page directly, it connects to this device as a friend of the device owner.

Entrust Instant Financial Issuance (IFI) On Premise software (formerly referred to as CardWizard) versions 5.x, prior to 6.10.5, and prior to 6.11.1 contain an insecure .NET Remoting exposure in the Legacy Remoting Service that is enabled by default. The service registers a TCP remoting channel with SOAP and binary formatters configured at TypeFilterLevel=Full and exposes default ObjectURI endpoints such as logfile.rem, photo.rem, cwPhoto.rem, and reports.rem on a network-reachable remoting port. A remote, unauthenticated attacker who can reach the remoting port can invoke exposed remoting objects to read arbitrary files from the server and coerce outbound authentication, and may achieve arbitrary file write and remote code execution via known .NET Remoting exploitation techniques. This can lead to disclosure of sensitive installation and service-account data and compromise of the affected host.

Missing Authentication for Critical Function vulnerability in debug_post_set.cgi of D-Link DWR-932C E1 firmware allows an unauthenticated attacker to execute administrative actions.