Buffer Overflow vulnerability in Supermicro motherboard X12DPG-QR 1.4b allows local attackers to hijack control flow via manipulation of SmcSecurityEraseSetupVar variable.

In decrypt_1_2 of CryptoPlugin.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-9 Android-10 Android-11 Android-8.1Android ID: A-176444622

In memory management driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android SoCAndroid ID: A-183464866

In memory management driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android SoCAndroid ID: A-183464868

Use of out-of-range pointer offset in the BIOS firmware for some Intel(R) Processors may allow a privileged user to potentially enable aescalation of privilege via local access.

In appendEventsToCacheLocked of SensorEventConnection.cpp, there is a possible out of bounds write due to a use-after-free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-9, Android-8.1, Android-10, Android-11; Android ID: A-168211968.

Buffer overflow in the kvm_vcpu_ioctl_x86_setup_mce function in arch/x86/kvm/x86.c in the KVM subsystem in the Linux kernel before 2.6.32-rc7 allows local users to cause a denial of service (memory corruption) or possibly gain privileges via a KVM_X86_SETUP_MCE IOCTL request that specifies a large number of Machine Check Exception (MCE) banks.

HUAWEI nova 4 versions earlier than 10.0.0.165(C01E34R2P4) and SydneyM-AL00 versions earlier than 10.0.0.165(C00E66R1P5) have an out-of-bounds read and write vulnerability. An attacker with specific permissions crafts malformed packet with specific parameter and sends the packet to the affected products. Due to insufficient validation of packet, which may be exploited to cause the information leakage or arbitrary code execution.

An arbitrary memory overwrite vulnerability in Asylo versions up to 0.6.0 allow an attacker to make an Ecall_restore function call to reallocate untrusted code and overwrite sections of the Enclave memory address. We recommend updating your library.

In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780)

Out of bounds write in system driver for some Intel(R) Graphics Drivers before version 15.33.50.5129 may allow an authenticated user to potentially enable escalation of privilege via local access.

A vulnerability has been found in OSGeo gdal up to 3.13.0dev-4. Affected by this issue is the function GDSDfldsrch of the file frmts/hdf4/hdf-eos/GDapi.c of the component Grid File Handler. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. Upgrading to version 3.13.0RC1 can resolve this issue. The identifier of the patch is 3e04c0385630e4d42517046d9a4967dfccfeb7fd. It is suggested to upgrade the affected component.

A flaw has been found in OSGeo gdal up to 3.13.0dev-4. Affected by this vulnerability is the function SWSDfldsrch of the file frmts/hdf4/hdf-eos/SWapi.c. Executing a manipulation can lead to heap-based buffer overflow. The attack requires local access. The exploit has been published and may be used. Upgrading to version 3.13.0RC1 addresses this issue. This patch is called 3e04c0385630e4d42517046d9a4967dfccfeb7fd. The affected component should be upgraded.

IrfanView 4.54 allows a user-mode write access violation starting at FORMATS!GetPlugInInfo+0x0000000000007e62.

Heap-based buffer overflow in Windows DWM Core Library allows an authorized attacker to elevate privileges locally.

A vulnerability has been identified in SIMATIC PCS 7 V8.2 and earlier (All versions), SIMATIC PCS 7 V9.0 (All versions < V9.0 SP3), SIMATIC PDM (All versions < V9.2), SIMATIC STEP 7 V5.X (All versions < V5.6 SP2 HF3), SINAMICS STARTER (containing STEP 7 OEM version) (All versions < V5.4 HF2). A buffer overflow vulnerability could allow a local attacker to cause a Denial-of-Service situation. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise the availability of the system as well as to have access to confidential information.

Heap-based buffer overflow in Windows DWM Core Library allows an authorized attacker to elevate privileges locally.

The keycompare_mb function in sort.c in sort in GNU Coreutils through 8.23 on 64-bit platforms performs a size calculation without considering the number of bytes occupied by multibyte characters, which allows attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via long UTF-8 strings.

An AVX-512-optimized implementation of the mempcpy function in the GNU C Library (aka glibc or libc6) 2.27 and earlier may write data beyond the target buffer, leading to a buffer overflow in __mempcpy_avx512_no_vzeroupper.

NVIDIA CUDA Toolkit, all versions prior to 11.1.1, contains a vulnerability in the NVJPEG library in which an out-of-bounds read or write operation may lead to code execution, denial of service, or information disclosure.

NVIDIA Windows GPU Display Driver, all versions, contains a vulnerability in the DirectX11 user mode driver (nvwgf2um/x.dll), in which a specially crafted shader can cause an out of bounds access, which may lead to denial of service or code execution.

A security vulnerability has been detected in libvips up to 8.18.2. The affected element is the function im_minpos_vec of the file libvips/deprecated/vips7compat.c of the component nip2 Handler. Such manipulation of the argument n leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed publicly and may be used. The vendor confirms that they will "be removing the deprecated area in libvips 8.19".

In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: remove cpu latency qos request on error Fix cpu latency qos list corruption like below. It happens when we do not remove cpu latency request on error path and free corresponding memory. [ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8). [ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0 <snip> [ 30.634640] l7 kernel: Call Trace: [ 30.634650] l7 kernel: <TASK> [ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6 [ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634690] l7 kernel: ? report_bug+0xff/0x140 [ 30.634702] l7 kernel: ? handle_bug+0x58/0x90 [ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70 [ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20 [ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634742] l7 kernel: plist_add+0xdd/0x140 [ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0 [ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0 [ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033]

In the Linux kernel, the following vulnerability has been resolved: be2net: Fix buffer overflow in be_get_module_eeprom be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once.

A security flaw has been discovered in GPAC up to 26.03-DEV-rev105-g8f39a1eb3-master. Affected by this vulnerability is the function elng_box_read of the file src/isomedia/box_code_base.c of the component MP4Box. Performing a manipulation of the argument elng results in out-of-bounds read. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks. The patch is named cf6ac48c972eaaee2af270adc3f36615325deb3e. The affected component should be upgraded.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.

IBM Sterling Connect:Direct for UNIX 4.2.0, 4.3.0, 6.0.0, and 6.1.0 is vulnerable to a stack based buffer ovreflow, caused by improper bounds checking. A local attacker could manipulate CD UNIX to obtain root provileges. IBM X-Force ID: 184578.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any ip values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=‘) in length. A ip value of length 0x3da will cause the service to crash.

In the Linux kernel, the following vulnerability has been resolved: jffs2: Prevent rtime decompress memory corruption The rtime decompression routine does not fully check bounds during the entirety of the decompression pass and can corrupt memory outside the decompression buffer if the compressed data is corrupted. This adds the required check to prevent this failure mode.

IBM Informix spatial 14.10 could allow a local user to execute commands as a privileged user due to an out of bounds write vulnerability. IBM X-Force ID: 189460.

A memory corruption issue was addressed with improved input validation. This issue is fixed in iOS 13.3.1 and iPadOS 13.3.1, watchOS 6.1.2. An application may be able to execute arbitrary code with kernel privileges.

A heap-based overflow vulnerability in makeContactAGIF in libagifencoder.quram.so library prior to SMR Oct-2022 Release 1 allows attacker to perform code execution.

A memory corruption issue was addressed with improved memory handling. This issue is fixed in iOS 13.3.1 and iPadOS 13.3.1, macOS Catalina 10.15.3, tvOS 13.3.1, watchOS 6.1.2. An application may be able to execute arbitrary code with system privileges.

Possible memory corruption in perfservice due to improper validation array length taken from user application. in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile in APQ8096AU, APQ8098, Kamorta, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, Saipan, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Flexsense DiskBoss 7.7.14 contains a local buffer overflow vulnerability in the 'Input Directory' component that allows unauthenticated attackers to execute arbitrary code on the system. Attackers can exploit this by pasting a specially crafted directory path into the 'Add Input Directory' field.

Flexsense DiskBoss 7.7.14 contains a local buffer overflow vulnerability in the 'Reports and Data Directory' field that allows an attacker to execute arbitrary code on the system.

In the Linux kernel, the following vulnerability has been resolved: rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read The nvmem interface supports variable buffer sizes, while the regmap interface operates with fixed-size storage. If an nvmem client uses a buffer size less than 4 bytes, regmap_read will write out of bounds as it expects the buffer to point at an unsigned int. Fix this by using an intermediary unsigned int to hold the value.

A memory corruption issue was addressed with improved validation. This issue is fixed in macOS Catalina 10.15.4. An application may be able to gain elevated privileges.

The Uniwill SparkIO.sys driver 1.0 is vulnerable to a stack-based buffer overflow via IOCTL 0x40002008.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated---

ATMFD.DLL in the Adobe Type Manager Font Driver in Microsoft Windows Server 2003 SP2, Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2012 Gold and R2, and Windows RT Gold and 8.1 allows local users to gain privileges via a crafted application, aka "ATMFD.DLL Memory Corruption Vulnerability."

In the Linux kernel, the following vulnerability has been resolved: mailbox: th1520: Fix memory corruption due to incorrect array size The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are intended to save and restore the interrupt mask registers in the MBOX ICU0. However, the array used to store these registers was incorrectly sized, leading to memory corruption when accessing all four registers. This commit corrects the array size to accommodate all four interrupt mask registers, preventing memory corruption during suspend and resume operations.