A security vulnerability has been detected in UTT 1200GW and 1250GW up to 3.0.0-170831/3.2.2-200710. This vulnerability affects unknown code of the file /goform/formApMail. The manipulation of the argument senderEmail leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UTT 1200GW up to 3.0.0-170831. Affected by this issue is some unknown functionality of the file /goform/ConfigWirelessBase. This manipulation of the argument ssid causes buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in UTT HiPER 840G up to 3.1.1-190328. Impacted is an unknown function of the file /goform/getOneApConfTempEntry. The manipulation of the argument tempName results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT 750W up to 3.2.2-191225. This issue affects some unknown processing of the file /goform/formPictureUrl. Executing manipulation of the argument importpictureurl can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in UTT HiPER 2620G up to 3.1.4. Impacted is the function strcpy of the file /goform/fNTP. This manipulation of the argument NTPServerIP causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 750W up to 5.0 and classified as critical. Affected by this issue is the function formDefineManagement of the file /goform/setSysAdm of the component Administrator Password Handler. The manipulation of the argument passwd1 leads to unverified password change. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 750W up to 3.2.2-191225. Affected by this vulnerability is the function system of the file /goform/formPdbUpConfig. Such manipulation of the argument policyNames leads to command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/websHostFilter. Performing manipulation of the argument addHostFilter results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Impacted is the function strcpy of the file /goform/formConfigDnsFilterGlobal. Such manipulation of the argument timeRangeName leads to buffer overflow. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

njs through 0.7.0, used in NGINX, was discovered to contain an out-of-bounds array access via njs_vmcode_typeof in /src/njs_vmcode.c.

Tp-Link TL-WR840N (EU) v6.20 Firmware (0.9.1 4.17 v0001.0 Build 201124 Rel.64328n) is vulnerable to Buffer Overflow via the Password reset feature.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R7000 before 1.0.11.126, R7960P before 1.4.2.84, R8000 before 1.0.4.74, RAX200 before 1.0.4.120, R8000P before 1.4.2.84, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.4.120, R7900P before 1.4.2.84, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.4.120.

An issue was discovered in the crypto2 crate through 2021-10-08 for Rust. During Chacha20 encryption and decryption, an unaligned read of a u32 may occur.

A malicious or compromised UApp or ABL can send a malformed system call to the bootloader, which may result in an out-of-bounds memory access that may potentially lead to an attacker leaking sensitive information or achieving code execution.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.66, D6400 before 1.0.0.100, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.52, DGN2200v4 before 1.0.0.118, EAX80 before 1.0.1.64, R6250 before 1.0.4.48, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R7960P before 1.4.1.64, R8000 before 1.0.4.62, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, R6400v2 before 1.0.4.106, R7000P before 1.3.2.132, R8000P before 1.4.1.64, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, R6700v3 before 1.0.4.106, R6900P before 1.3.2.132, R7900P before 1.4.1.64, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.3.106.

Asus RT-AC68U <3.0.0.4.385.20633 and RT-AC5300 <3.0.0.4.384.82072 are affected by a buffer overflow in blocking_request.cgi.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects DC112A before 1.0.0.52, R6400 before 1.0.1.68, RAX200 before 1.0.3.106, WNDR3400v3 before 1.0.1.38, XR300 before 1.0.3.68, R8500 before 1.0.2.144, RAX75 before 1.0.3.106, R8300 before 1.0.2.144, and RAX80 before 1.0.3.106.

The audio module has a vulnerability in verifying the parameters passed by the application space.Successful exploitation of this vulnerability may cause out-of-bounds memory access.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6250 before 1.0.4.48, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7900 before 1.0.4.38, R8300 before 1.0.2.144, R8500 before 1.0.2.144, XR300 before 1.0.3.68, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.

The olm_session_describe function in Matrix libolm before 3.2.7 is vulnerable to a buffer overflow. The Olm session object represents a cryptographic channel between two parties. Therefore, its state is partially controllable by the remote party of the channel. Attackers can construct a crafted sequence of messages to manipulate the state of the receiver's session in such a way that, for some buffer sizes, a buffer overflow happens on a call to olm_session_describe. Furthermore, safe buffer sizes were undocumented. The overflow content is partially controllable by the attacker and limited to ASCII spaces and digits. The known affected products are Element Web And SchildiChat Web.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/reset_cloud_pwd feature, which allows malicous users to execute arbitrary code on the system via a crafted post request.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects EX6000 before 1.0.0.38, EX6120 before 1.0.0.48, EX6130 before 1.0.0.30, R6300v2 before 1.0.4.52, R6400 before 1.0.1.52, R7000 before 1.0.11.126, R7900 before 1.0.4.30, R8000 before 1.0.4.52, R7000P before 1.3.2.124, R8000P before 1.4.1.50, RAX80 before 1.0.3.88, R6900P before 1.3.2.124, R7900P before 1.4.1.50, and RAX75 before 1.0.3.88.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/upgrade_info feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/check_reg_verify_code function which could let a remove malicious user execute arbitrary code via a crafted post request.

log_blackbox.c in libqb before 2.0.8 allows a buffer overflow via long log messages because the header size is not considered.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerabiltiy exists in TP-LINK WR-886N 20190826 2.3.8 in thee /cloud_config/router_post/login feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

Buffer overflow vulnerability has been identified in Lexmark devices through 2021-12-07 in postscript interpreter.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. pop.c does not forbid characters that may have unsafe interaction with message-cache pathnames, as demonstrated by a '/' character.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 via the /cloud_config/router_post/check_reset_pwd_verify_code interface.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects EX7000 before 1.0.1.80, R6400 before 1.0.1.50, R6400v2 before 1.0.4.118, R6700 before 1.0.2.8, R6700v3 before 1.0.4.118, R6900 before 1.0.2.8, R6900P before 1.3.2.124, R7000 before 1.0.9.88, R7000P before 1.3.2.124, R7900 before 1.0.3.18, R7900P before 1.4.1.50, R8000 before 1.0.4.46, R8000P before 1.4.1.50, RAX80 before 1.0.1.56, and WNR3500Lv2 before 1.2.0.62.

An issue was discovered in FIS GT.M through V7.0-000 (related to the YottaDB code base). Using crafted input, an attacker can control the size variable and buffer that is passed to a call to memcpy. An attacker can use this to overwrite key data structures and gain control of the flow of execution.

A Buffer Overflow vulnerabilityexists in Pev 0.81 via the pe_exports function from exports.c.. The array offsets_to_Names is dynamically allocated on the stack using exp->NumberOfFunctions as its size. However, the loop uses exp->NumberOfNames to iterate over it and set its components value. Therefore, the loop code assumes that exp->NumberOfFunctions is greater than ordinal at each iteration. This can lead to arbitrary code execution.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They have a buffer overflow via base64 data.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/modify_account_pwd feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reset_pwd_veirfy_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reg_verify_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

Tenda AC6 v15.03.05.19 is vulnerable to Buffer Overflow as the Index parameter does not verify the length.

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the mitInterface parameter in ip/goform/RouteStatic

Apache PLC4X - PLC4C (Only the C language implementation was effected) was vulnerable to an unsigned integer underflow flaw inside the tcp transport. Users should update to 0.9.1, which addresses this issue. However, in order to exploit this vulnerability, a user would have to actively connect to a mallicious device which could send a response with invalid content. Currently we consider the probability of this being exploited as quite minimal, however this could change in the future, especially with the industrial networks growing more and more together.

Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote firmware download feature that could allow remote unauthenticated users to perform various attacks. In non-secure mode, the user is unauthenticated.

Buffer Copy without Checking Size of Input ('Classic Buffer Overflow'), Out-of-bounds Write, Download of Code Without Integrity Check vulnerability in Silicon Labs Gecko Bootloader on ARM (Firmware Update File Parser modules) allows Code Injection, Authentication Bypass.This issue affects "Standalone" and "Application" versions of Gecko Bootloader.

Buffer Overflow vulnerability in tvnviewer.exe of TightVNC Viewer allows a remote attacker to execute arbitrary instructions via a crafted FramebufferUpdate packet from a VNC server.

Two Buffer Overflow vulnerabilities exists in T10 V2_Firmware V4.1.8cu.5207_B20210320 in the http_request_parse function when processing host data in the HTTP request process.

A flaw has been found in Tenda RX3 16.03.13.11. This issue affects the function set_device_name of the file /goform/setBlackRule of the component MAC Filtering Configuration Endpoint. This manipulation of the argument devName/mac causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used.