A buffer overflow in WatchGuard Fireware OS could may allow an authenticated remote attacker with privileged management access to execute arbitrary code with system privileges on the firewall. This issue affects Fireware OS: from 11.9.6 through 12.10.3.

An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow an authenticated privileged administrator to execute arbitrary code with root permissions via an exposed management interface. This vulnerability affects Fireware OS 11.9 up to and including 11.12.4_Update1, 12.0 up to and including 12.11.7 and 2025.1 up to and including 2026.1.1.

An Out-of-bounds Write vulnerability in WatchGuard Fireware OS's CLI could allow an authenticated privileged user to execute arbitrary code via a specially crafted CLI command.This vulnerability affects Fireware OS 12.0 up to and including 12.11.4, 12.5 up to and including 12.5.13, and 2025.1 up to and including 2025.1.2.

An Out-of-bounds Write vulnerability in WatchGuard Fireware OS's CLI could allow an authenticated privileged user to execute arbitrary code via specially crafted IPSec configuration CLI commands.This vulnerability affects Fireware OS 11.0 up to and including 11.12.4+541730, 12.0 up to and including 12.11.4, 12.5 up to and including 12.5.13, and 2025.1 up to and including 2025.1.2.

An Out-of-bounds Write vulnerability in WatchGuard Fireware OS’s certificate request command could allow an authenticated privileged user to execute arbitrary code via specially crafted CLI commands.This vulnerability affects Fireware OS 12.0 up to and including 12.11.4, 12.5 up to and including 12.5.13, and 2025.1 up to and including 2025.1.2.

Stack-based Buffer Overflow vulnerability in the WatchGuard Agent discovery service on Windows allows Overflow Buffers. An unauthenticated attacker on the same local network could exploit this vulnerability to crash the agent service.

Stack-based Buffer Overflow vulnerability in the WatchGuard Agent discovery service on Windows allows Overflow Buffers. An unauthenticated attacker on the same local network could exploit this vulnerability to crash the agent service.

Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, multiple stack-based buffer overflows exist in the Security Configuration Assessment (SCA) decoder (`wazuh-analysisd`). The use of `sprintf` with a floating-point (`%lf`) format specifier on a fixed-size 128-byte buffer allows a remote attacker to overflow the stack. A specially crafted JSON event can trigger this overflow, leading to a denial of service (crash) or potential RCE on the Wazuh manager. The vulnerability is located in `/src/analysisd/decoders/security_configuration_assessment.c`, within the `FillScanInfo` and `FillCheckEventInfo` functions. In multiple locations, a 128-byte buffer (`char value[OS_SIZE_128];`) is allocated on the stack to hold the string representation of a number from a JSON event. The code checks if the number is an integer or a double. If it's a double, it uses `sprintf(value, "%lf", ...)` to perform the conversion. This `sprintf` call is unbounded. If a floating-point number with a large exponent (e.g., `1.0e150`) is provided, `sprintf` will attempt to write its full string representation (a "1" followed by 150 zeros), which is larger than the 128-byte buffer, corrupting the stack. Version 4.14.3 patches the issue.

A vulnerability was detected in Wavlink WL-NU516U1 20251208. This vulnerability affects the function sub_401218 of the file /cgi-bin/nas.cgi. Performing a manipulation of the argument User1Passwd results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.4.0 and prior to version 4.14.3, a stack-based buffer overflow vulnerability exists in the Wazuh Database synchronization module (`wdb_delta_event.c`). The SQL query construction logic allows for an integer underflow when calculating the remaining buffer size. This occurs because the code incorrectly aggregates the return value of `snprintf`. If a specific database synchronization payload exceeds the size of the query buffer (2048 bytes), the size calculation wraps around to a massive integer, effectively removing bounds checking for subsequent writes. This allows an attacker to corrupt the stack, leading to a Denial of Service (DoS) or potentially RCE. Version 4.14.3 fixes the issue.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to a stack-based buffer overflow condition in the name parameter, which may allow an attacker to remotely execute arbitrary code.

A possible stack-based buffer overflow vulnerability in Exynos CP Chipset prior to SMR Oct-2021 Release 1 allows arbitrary memory write and code execution.

A specially crafted TCP/IP packet may cause the camera recovery image web interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

A security vulnerability has been detected in Tenda AC9 15.03.06.42_multi. Affected by this vulnerability is the function formGetRebootTimer. Such manipulation of the argument sys.schedulereboot.start_time/sys.schedulereboot.end_time leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Tenda AC9 15.03.06.42_multi. Affected is the function formGetDdosDefenceList. This manipulation of the argument security.ddos.map causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A specially crafted TCP/IP packet may cause a camera recovery image telnet interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

A stack-based buffer overflow vulnerability [CWE-121] in FortiWeb version 7.0.1 and earlier, 6.4 all versions, version 6.3.19 and earlier may allow a privileged attacker to execute arbitrary code or commands via specifically crafted CLI `execute backup-local rename` and `execute backup-local show` operations.

Stack-based buffer overflow vulnerabilities exist in several underlying management service components accessed through the command-line interface of the AOS-8 and AOS-10 Operating Systems. An authenticated attacker with administrative privileges could exploit these vulnerabilities by sending specially crafted requests to the affected services. Successful exploitation could allow the attacker to execute arbitrary code with elevated privileges on the underlying operating system.

Stack-based Buffer Overflow vulnerability in SiteManager allows logged-in or local user to cause arbitrary code execution. This issue affects: Secomea SiteManager all versions prior to 9.7.

A stack-based buffer overflow vulnerability exists in the console factory functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to remote code execution. An attacker can send a sequence of malicious packets to trigger this vulnerability.

A vulnerability was identified in D-Link DIR-825 2.10. Affected by this vulnerability is the function get_ping_app_stat of the file ping_response.cgi of the component httpd. The manipulation of the argument ping_ipaddr leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in TRENDnet TEW-632BRP 1.010B32. This affects an unknown part of the file /ping_response.cgi of the component HTTP POST Request Handler. The manipulation of the argument ping_ipaddr results in stack-based buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A stack-based buffer overflow vulnerability exists in the wireless.cgi SetName() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in the wireless.cgi DeleteMac() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in the wireless.cgi set_wifi_basic_mesh() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in the wireless.cgi AddMac() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A vulnerability was identified in D-Link DI-8100 16.07.26A1. This affects the function sprintf of the file yyxz.asp. The manipulation of the argument ID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability has been found in Totolink N350RT 9.3.5u.6139_B202012 and classified as critical. Affected by this vulnerability is the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument http_host leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249853 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

A stack-based buffer overflow vulnerability exists in the wireless.cgi set_wifi_basic() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute code. We have already fixed the vulnerability in the following versions: QTS 5.2.1.2930 build 20241025 and later QuTS hero h5.2.1.2929 build 20241025 and later

A vulnerability in web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to an affected device. A successful exploit could allow the attacker to execute remote code on the affected device. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Stack-based buffer overflow vulnerabilities exist in several underlying management service components accessed through the command-line interface of the AOS-8 and AOS-10 Operating Systems. An authenticated attacker with administrative privileges could exploit these vulnerabilities by sending specially crafted requests to the affected services. Successful exploitation could allow the attacker to execute arbitrary code with elevated privileges on the underlying operating system.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been classified as critical. Affected is an unknown function of the file /jingx.asp of the component HTTP Request Handler. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Stack-based buffer overflow vulnerabilities exist in several underlying management service components accessed through the command-line interface of the AOS-8 and AOS-10 Operating Systems. An authenticated attacker with administrative privileges could exploit these vulnerabilities by sending specially crafted requests to the affected services. Successful exploitation could allow the attacker to execute arbitrary code with elevated privileges on the underlying operating system.

Stack-based buffer overflow vulnerabilities exist in several underlying management service components accessed through the command-line interface of the AOS-8 and AOS-10 Operating Systems. An authenticated attacker with administrative privileges could exploit these vulnerabilities by sending specially crafted requests to the affected services. Successful exploitation could allow the attacker to execute arbitrary code with elevated privileges on the underlying operating system.

There is a vulnerability in the Supermicro BMC web function at Supermicro MBD-X13SEDW-F. After logging into the BMC Web server, an attacker can use a specially crafted payload to trigger the Stack buffer overflow vulnerability.

Stack-based buffer overflow vulnerabilities exist in several underlying management service components accessed through the command-line interface of the AOS-8 and AOS-10 Operating Systems. An authenticated attacker with administrative privileges could exploit these vulnerabilities by sending specially crafted requests to the affected services. Successful exploitation could allow the attacker to execute arbitrary code with elevated privileges on the underlying operating system.

A vulnerability was identified in Wavlink WL-NU516U1 V240425. This vulnerability affects the function sub_401A0C of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure.

Multiple stack-based buffer overflows in the command line interpreter of FortiWeb before 6.4.2 may allow an authenticated attacker to achieve arbitrary code execution via specially crafted commands.