Stack-based buffer overflow vulnerability exists in how the CMA readfile function of Garrett Metal Detectors iC Module CMA Version 5.0 is used at various locations. The Garrett iC Module exposes an authenticated CLI over TCP port 6877. This interface is used by a secondary GUI client, called “CMA Connect”, to interact with the iC Module on behalf of the user. After a client successfully authenticates, they can send plaintext commands to manipulate the device.

A stack-based buffer overflow vulnerability exists in the CMA check_udp_crc function of Garrett Metal Detectors’ iC Module CMA Version 5.0. A specially-crafted packet can lead to a stack-based buffer overflow during a call to memcpy. An attacker can send a malicious packet to trigger this vulnerability.

A directory traversal vulnerability exists in the CMA CLI setenv command of Garrett Metal Detectors’ iC Module CMA Version 5.0. An attacker can provide malicious input to trigger this vulnerability

A stack-based buffer overflow vulnerability exists in the CMA check_udp_crc function of Garrett Metal Detectors’ iC Module CMA Version 5.0. A specially-crafted packet can lead to a stack-based buffer overflow during a call to strcpy. An attacker can send a malicious packet to trigger this vulnerability.

A vulnerability classified as critical has been found in Tenda FH451 1.0.0.9. Affected is the function webExcptypemanFilter of the file /goform/webExcptypemanFilter. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. This affects the function SubUPnPCSInit of the file /sbin/udev. The manipulation of the argument CameraName leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in D-Link DWR-M960 1.01.07. This affects the function sub_4237AC of the file /boafrm/formLteSetup of the component LTE Configuration Endpoint. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

A vulnerability was found in Tenda AC7 15.03.06.44. It has been classified as critical. Affected is the function fromSafeSetMacFilter of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DWR-M960 1.01.07. This issue affects the function sub_46385C of the file /boafrm/formDosCfg. Performing a manipulation of the argument submit-url results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A vulnerability has been found in Tenda A18 15.13.07.13. This affects the function strcpy of the file /goform/WifiExtraSet of the component Httpd Service. The manipulation of the argument wpapsk_crypto5g leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Tenda HG9 300001138. Affected is an unknown function of the file /boaform/formSamba of the component Samba Configuration Endpoint. The manipulation of the argument sambaCap results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Tenda AC7 15.03.06.44. It has been declared as critical. Affected by this vulnerability is the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument reboot_time leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda A301 15.13.08.12. It has been classified as critical. Affected is the function fromSetWirelessRepeat of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-269160. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A stack-based buffer overflow vulnerability exists in the boa formWsc functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can send a series of HTTP requests to trigger this vulnerability.

A vulnerability was found in D-Link DI-8100 up to 16.07.26A1 and classified as critical. This issue affects some unknown processing of the file /ddos.asp of the component jhttpd. The manipulation of the argument def_max/def_time/def_tcp_max/def_tcp_time/def_udp_max/def_udp_time/def_icmp_max leads to stack-based buffer overflow. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult.

A vulnerability has been identified in POWER METER SICAM Q100 (All versions < V2.41), POWER METER SICAM Q100 (All versions < V2.41), POWER METER SICAM Q100 (All versions < V2.41), POWER METER SICAM Q100 (All versions < V2.41). The affected firmware contains a buffer overflow vulnerability in the web application that could allow a remote attacker with engineer or admin priviliges to potentially perform remote code execution.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been classified as critical. This affects the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been declared as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in Wavlink WL-NU516U1 up to 130/260. This affects the function sub_406194 of the file /cgi-bin/adm.cgi. Such manipulation of the argument firmware_url leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

PostgreSQL versions 10.x before 10.9 and versions 11.x before 11.4 are vulnerable to a stack-based buffer overflow. Any authenticated user can overflow a stack-based buffer by changing the user's own password to a purpose-crafted value. This often suffices to execute arbitrary code as the PostgreSQL operating system account.

A vulnerability was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). It has been rated as critical. This issue affects the function cgiSysScheduleRebootSet of the file /bin/httpd. The manipulation of the argument rebootDate leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DWR-M961 1.1.36 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formStaticDHCP of the component Authorization Interface. The manipulation of the argument Hostname leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.1.49 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). It has been declared as critical. This vulnerability affects the function cgiPingSet of the file /bin/httpd. The manipulation of the argument pingIP leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644) and classified as critical. Affected by this issue is the function cgiSysUplinkCheckSet of the file /bin/httpd. The manipulation of the argument hostIp1/hostIp2 leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A stack overflow vulnerability exists in the AOS-10 web-based management interface of a Mobility Gateway. Successful exploitation could allow an authenticated malicious actor to execute arbitrary code as a privileged user on the underlying operating system.

A vulnerability was found in Tenda W12 3.0.0.5. It has been rated as critical. Affected by this issue is the function cgiWifiRadioSet of the file /bin/httpd. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda AC1206 15.03.06.23. It has been classified as critical. Affected is the function form_fast_setting_wifi_set of the file /goform/fast_setting_wifi_set. The manipulation of the argument ssid/timeZone leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

A vulnerability was found in Tenda AC8 16.03.34.06 and classified as critical. This issue affects the function sub_49E098 of the file /goform/SetIpMacBind of the component Parameter Handler. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Certain NETGEAR devices are affected by out-of-bounds reads and writes. This affects R6400 before 1.0.1.70, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, and XR300 before 1.0.3.50.

A flaw has been found in Tenda 4G300 US_4G300V1.0Mt_V1.01.42_CN_TDC01. Affected is the function sub_427C3C of the file /goform/SafeMacFilter. This manipulation of the argument page causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.36, D7000 before 1.0.1.70, EX6200v2 before 1.0.1.78, EX7000 before 1.0.1.78, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.42, R6050 before 1.0.1.18, R6080 before 1.0.0.42, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.64, R6300v2 before 1.0.4.34, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7800 before 1.0.2.60, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.40.

Parallels Desktop Toolgate Heap-based Buffer Overflow Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute high-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the current user on the host system. Was ZDI-CAN-20450.

A security vulnerability has been detected in Belkin F9K1015 1.00.10. Impacted is the function formSetSystemSettings of the file /goform/formSetSystemSettings of the component Setting Handler. The manipulation of the argument webpage leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Tenda RX3 16.03.13.11. This issue affects the function formSetDeviceName of the file /goform/SetOnlineDevName. The manipulation of the argument devName leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in Tenda AC9 15.03.06.42_multi. Affected by this vulnerability is the function formGetRebootTimer. Such manipulation of the argument sys.schedulereboot.start_time/sys.schedulereboot.end_time leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A stack-based buffer overflow vulnerability exists in the boa setRepeaterSsid functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of network requests can lead to arbitrary code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability was found in Tenda AC10 16.03.10.13 and classified as critical. This issue affects the function ShutdownSetAdd of the file /goform/ShutdownSetAdd. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2425 build 20230609 and later QTS 5.1.0.2444 build 20230629 and later QTS 4.5.4.2467 build 20230718 and later QuTS hero h5.0.1.2515 build 20230907 and later QuTS hero h5.1.0.2424 build 20230609 and later QuTS hero h4.5.4.2476 build 20230728 and later QuTScloud c5.1.0.2498 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2425 build 20230609 and later QTS 5.1.0.2444 build 20230629 and later QTS 4.5.4.2467 build 20230718 and later QuTS hero h5.0.1.2515 build 20230907 and later QuTS hero h5.1.0.2424 build 20230609 and later QuTS hero h4.5.4.2476 build 20230728 and later QuTScloud c5.1.0.2498 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2425 build 20230609 and later QTS 5.1.0.2444 build 20230629 and later QTS 4.5.4.2467 build 20230718 and later QuTS hero h5.0.1.2515 build 20230907 and later QuTS hero h5.1.0.2424 build 20230609 and later QuTS hero h4.5.4.2476 build 20230728 and later QuTScloud c5.1.0.2498 and later

Multiple buffer overflows in the limited configuration shell (/sbin/gs_config) on Grandstream HT801 devices before 1.0.29 allow remote authenticated users to execute arbitrary code as root via a crafted manage_if setting, thus bypassing the intended restrictions of this shell and taking full control of the device. There are default weak credentials that can be used to authenticate.

An exploitable buffer overflow vulnerability exists in the camera "replace" feature of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts the URL field from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

A vulnerability was detected in Belkin F9K1122 1.00.33. Affected is the function formWlanSetup of the file /goform/formWlanSetup. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An exploitable buffer overflow vulnerability exists in the samsungWifiScan handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strcpy at [8] overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long 'callbackUrl' value in order to exploit this vulnerability.

An exploitable stack-based buffer overflow vulnerability exists in the retrieval of database fields in video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process insecurely extracts the fields from the "clips" table of its SQLite database, leading to a buffer overflow on the stack. An attacker can send a series of HTTP requests to trigger this vulnerability.

On Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17, the video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability. A strcpy overflows the destination buffer, which has a size of 40 bytes. An attacker can send an arbitrarily long "user" value in order to exploit this vulnerability.

Dell iDRAC 9 prior to version 4.40.40.00 and iDRAC 8 prior to version 2.80.80.80 contain a Stack Buffer Overflow in Racadm. An authenticated remote attacker may potentially exploit this vulnerability to control process execution and gain access to the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.