A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues.
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local "fail_msg" string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since "fail_msg" remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure.
A vulnerability was detected in libvips 8.19.0. This affects the function vips_bandrank_build of the file libvips/conversion/bandrank.c. Performing a manipulation of the argument index results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit is now public and may be used. The patch is named fd28c5463697712cb0ab116a2c55e4f4d92c4088. It is suggested to install a patch to address this issue.
In the Linux kernel, the following vulnerability has been resolved: afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and Linux's afs client switches between them when talking to a non-YFS server if the read size, the file position or the sum of the two have the upper 32 bits set of the 64-bit value. This is a problem, however, since the file position and length fields of FS.FetchData are *signed* 32-bit values. Fix this by capturing the capability bits obtained from the fileserver when it's sent an FS.GetCapabilities RPC, rather than just discarding them, and then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be used to decide whether to use FS.FetchData or FS.FetchData64 - and also FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to switch on the parameter values. This capabilities flag could also be used to limit the maximum size of the file, but all servers must be checked for that. Note that the issue does not exist with FS.StoreData - that uses *unsigned* 32-bit values. It's also not a problem with Auristor servers as its YFS.FetchData64 op uses unsigned 64-bit values. This can be tested by cloning a git repo through an OpenAFS client to an OpenAFS server and then doing "git status" on it from a Linux afs client[1]. Provided the clone has a pack file that's in the 2G-4G range, the git status will show errors like: error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index This can be observed in the server's FileLog with something like the following appearing: Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001 Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866 ... Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5 Note the file position of 18446744071815340032. This is the requested file position sign-extended.
In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix races between xattr_{set|get} and listxattr operations UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1]. Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4. [1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com
AbsoluteTelnet 11.24 contains a denial of service vulnerability that allows local attackers to crash the application by manipulating DialUp connection and license name fields. Attackers can generate a 1000-character payload and paste it into specific input fields to trigger application crashes and force unexpected termination.
AbsoluteTelnet 11.24 contains a denial of service vulnerability that allows local attackers to crash the application by manipulating username and error report fields. Attackers can trigger the crash by inserting 1000 characters into the username or email address fields, causing the application to become unresponsive.
IBM Informix Dynamic Server 12.10 and 14.10 cdr is vulnerable to a heap buffer overflow, caused by improper bounds checking which could allow a local user to cause a segmentation fault. IBM X-Force ID: 251206.
IBM Informix Dynamic Server 12.10 and 14.10 archecker is vulnerable to a heap buffer overflow, caused by improper bounds checking which could allow a local user to cause a segmentation fault. IBM X-Force ID: 251204.
A vulnerability classified as critical was found in Twister Antivirus 8. This vulnerability affects the function 0x804f2143/0x804f217f/0x804f214b/0x80800043 in the library filppd.sys of the component IoControlCode Handler. The manipulation leads to memory corruption. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-229852. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
In the Linux kernel, the following vulnerability has been resolved: NFS: fix an incorrect limit in filelayout_decode_layout() The "sizeof(struct nfs_fh)" is two bytes too large and could lead to memory corruption. It should be NFS_MAXFHSIZE because that's the size of the ->data[] buffer. I reversed the size of the arguments to put the variable on the left.
In the Linux kernel, the following vulnerability has been resolved: mptcp: fix data stream corruption Maxim reported several issues when forcing a TCP transparent proxy to use the MPTCP protocol for the inbound connections. He also provided a clean reproducer. The problem boils down to 'mptcp_frag_can_collapse_to()' assuming that only MPTCP will use the given page_frag. If others - e.g. the plain TCP protocol - allocate page fragments, we can end-up re-using already allocated memory for mptcp_data_frag. Fix the issue ensuring that the to-be-expanded data fragment is located at the current page frag end. v1 -> v2: - added missing fixes tag (Mat)
Insufficient input validation during parsing of the System Management Mode (SMM) binary may allow a maliciously crafted SMM executable binary to corrupt Dynamic Root of Trust for Measurement (DRTM) user application memory that may result in a potential denial of service.
libjxl b02d6b9, as used in libvips 8.11 through 8.11.2 and other products, has an out-of-bounds write in jxl::ModularFrameDecoder::DecodeGroup (called from jxl::FrameDecoder::ProcessACGroup and jxl::ThreadPool::RunCallState<jxl::FrameDecoder::ProcessSections).
A security vulnerability has been detected in CodeAstro Food Ordering System 1.0. This affects an unknown function of the file food_ordering.exe. Such manipulation leads to stack-based buffer overflow. The attack can only be performed from a local environment. The exploit has been disclosed publicly and may be used.
A flaw has been found in libvips up to 8.18.0. The affected element is the function vips_foreign_load_matrix_file_is_a/vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. Executing a manipulation can lead to memory corruption. The attack needs to be launched locally. This patch is called d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. A patch should be applied to remediate this issue.
A vulnerability was found in libvips up to 8.18.0. This affects the function vips_foreign_load_csv_build of the file libvips/foreign/csvload.c. The manipulation results in heap-based buffer overflow. The attack requires a local approach. The exploit has been made public and could be used. The patch is identified as b3ab458a25e0e261cbd1788474bbc763f7435780. It is advisable to implement a patch to correct this issue.
Insufficient bounds checking in the ASP (AMD Secure Processor) may allow an attacker to access memory outside the bounds of what is permissible to a TA (Trusted Application) resulting in a potential denial of service.
A vulnerability was detected in Open Babel up to 3.1.1. This issue affects the function OBSmilesParser::ParseSmiles of the file /src/formats/smilesformat.cpp. Performing manipulation results in heap-based buffer overflow. The attack needs to be approached locally. The exploit is now public and may be used.
An integer overflow vulnerability existed in the static function wolfssl_add_to_chain, that caused heap corruption when certificate data was written out of bounds of an insufficiently sized certificate buffer. wolfssl_add_to_chain is called by these API: wolfSSL_CTX_add_extra_chain_cert, wolfSSL_CTX_add1_chain_cert, wolfSSL_add0_chain_cert. These API are enabled for 3rd party compatibility features: enable-opensslall, enable-opensslextra, enable-lighty, enable-stunnel, enable-nginx, enable-haproxy. This issue is not remotely exploitable, and would require that the application context loading certificates is compromised.
In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.
In the Linux kernel, the following vulnerability has been resolved: module: Fix kernel panic when a symbol st_shndx is out of bounds The module loader doesn't check for bounds of the ELF section index in simplify_symbols(): for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) { const char *name = info->strtab + sym[i].st_name; switch (sym[i].st_shndx) { case SHN_COMMON: [...] default: /* Divert to percpu allocation if a percpu var. */ if (sym[i].st_shndx == info->index.pcpu) secbase = (unsigned long)mod_percpu(mod); else /** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr; sym[i].st_value += secbase; break; } } A symbol with an out-of-bounds st_shndx value, for example 0xffff (known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic: BUG: unable to handle page fault for address: ... RIP: 0010:simplify_symbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exception This can happen when module ELF is legitimately using SHN_XINDEX or when it is corrupted. Add a bounds check in simplify_symbols() to validate that st_shndx is within the valid range before using it. This issue was discovered due to a bug in llvm-objcopy, see relevant discussion for details [1]. [1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/
In the Linux kernel, the following vulnerability has been resolved: jfs: Fix shift-out-of-bounds in dbDiscardAG When searching for the next smaller log2 block, BLKSTOL2() returned 0, causing shift exponent -1 to be negative. This patch fixes the issue by exiting the loop directly when negative shift is found.
A vulnerability was determined in BehaviorTree up to 4.7.0. This affects the function ParseScript of the file /src/script_parser.cpp of the component Diagnostic Message Handler. Executing manipulation of the argument error_msgs_buffer can lead to stack-based buffer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. This patch is called cb6c7514efa628adb8180b58b4c9ccdebbe096e3. A patch should be applied to remediate this issue.
A vulnerability was found in GNU Binutils 2.45. Affected is the function elf_link_add_object_symbols of the file bfd/elflink.c of the component Linker. The manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. Upgrading to version 2.46 is able to address this issue. The patch is identified as 72efdf166aa0ed72ecc69fc2349af6591a7a19c0. Upgrading the affected component is advised.
TensorFlow is an open source platform for machine learning. In affected versions the shape inference function for `Transpose` is vulnerable to a heap buffer overflow. This occurs whenever `perm` contains negative elements. The shape inference function does not validate that the indices in `perm` are all valid. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.
A vulnerability was identified in janet-lang janet up to 1.40.1. Affected by this vulnerability is the function janetc_varset of the file src/core/specials.c of the component handleattr Handler. The manipulation leads to out-of-bounds read. The attack can only be performed from a local environment. The exploit is publicly available and might be used. Upgrading to version 1.41.0 addresses this issue. The identifier of the patch is 2fabc80151a2b8834ee59cda8a70453f848b40e5. The affected component should be upgraded.
In video decoder, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed
IBM SPSS Statistics for Windows 24.0, 25.0, 26.0, 27.0, 27.0.1, and 28.0 could allow a local user to cause a denial of service by writing arbitrary files to admin protected directories on the system. IBM X-Force ID: 212046.
Buffer overflow vulnerability in the scanning module. Impact: Successful exploitation of this vulnerability may affect availability.
GPAC 2.3-DEV-rev605-gfc9e29089-master contains a SEGV in gpac/MP4Box in gf_media_change_pl /afltest/gpac/src/media_tools/isom_tools.c:3293:42.
IBM Spectrum Protect Client 7.1 and 8.1 is vulnerable to a stack based buffer overflow, caused by improper bounds checking. A local attacker could exploit this vulnerability and cause a denial of service. IBM X-Force ID: 214438.
Out-of-bounds write in some Intel(R) Arc(TM) Control software before version 1.73.5335.2 may allow an authenticated user to potentially enable denial of service via local access.
A vulnerability has been found in wren-lang wren up to 0.4.0. This impacts the function printError of the file src/vm/wren_compiler.c of the component Error Message Handler. Such manipulation leads to stack-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos OS allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS * All versions prior to 19.1R3-S10; * 19.2 versions prior to 19.2R3-S7; * 19.3 versions prior to 19.3R3-S8; * 19.4 versions prior to 19.4R3-S12; * 20.2 versions prior to 20.2R3-S8; * 20.4 versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1; * 23.2 versions prior to 23.2R2.
An out-of-bounds write in the engine module in AVG/Avast Antivirus signature <24092400 released on 24/Sep/2024 on MacOS allows a malformed Mach-O file to crash the application during file processing.
zsh through version 5.4.2 is vulnerable to a stack-based buffer overflow in the exec.c:hashcmd() function. A local attacker could exploit this to cause a denial of service.
An out-of-bounds write in the engine module in AVG/Avast Antivirus signature <24092400 released on 24/Sep/2024 on MacOS allows a malformed eml file to crash the application during file processing.
A vulnerability was found in SourceCodester Airport Booking Management System 1.0 and classified as critical. Affected by this issue is the function Details. The manipulation of the argument passport/name leads to buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.
A security flaw has been discovered in admesh up to 0.98.5. This issue affects the function stl_check_normal_vector of the file src/normals.c. Performing a manipulation results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. It looks like this product is not really maintained anymore.
A vulnerability was found in Nsasoft ShareAlarmPro 2.1.4 and classified as problematic. Affected by this issue is some unknown functionality of the component Registration Handler. The manipulation of the argument Name/Key leads to memory corruption. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251672. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Buffer Overflow vulnerability in Cesanta mJS 1.26 allows remote attackers to cause a denial of service via crafted .js file to mjs_set_errorf.
Heap-based buffer overflow vulnerability in the image module. Impact: Successful exploitation of this vulnerability may affect availability.
Out-of-bounds write vulnerability in the camera module. Impact: Successful exploitation of this vulnerability may affect availability.
Buffer overflow vulnerability in the HDC module. Impact: Successful exploitation of this vulnerability may affect availability.
Out-of-bounds write vulnerability in the DFX module. Impact: Successful exploitation of this vulnerability may affect availability.
In PCRE 8.41, after compiling, a pcretest load test PoC produces a crash overflow in the function match() in pcre_exec.c because of a self-recursive call. NOTE: third parties dispute the relevance of this report, noting that there are options that can be used to limit the amount of stack that is used
In CPUID CPU-Z before 1.43, there is an arbitrary memory write that results directly in elevation of privileges, because any program running on the local machine (while CPU-Z is running) can issue an ioctl 0x9C402430 call to the kernel-mode driver (e.g., cpuz141_x64.sys for version 1.41).
Cloudflare version of zlib library was found to be vulnerable to memory corruption issues affecting the deflation algorithm implementation (deflate.c). The issues resulted from improper input validation and heap-based buffer overflow. A local attacker could exploit the problem during compression using a crafted malicious file potentially leading to denial of service of the software. Patches: The issue has been patched in commit 8352d10 https://github.com/cloudflare/zlib/commit/8352d108c05db1bdc5ac3bdf834dad641694c13c . The upstream repository is not affected.
TensorFlow is an end-to-end open source platform for machine learning. The implementation of `tf.raw_ops.ReverseSequence` allows for stack overflow and/or `CHECK`-fail based denial of service. The implementation(https://github.com/tensorflow/tensorflow/blob/5b3b071975e01f0d250c928b2a8f901cd53b90a7/tensorflow/core/kernels/reverse_sequence_op.cc#L114-L118) fails to validate that `seq_dim` and `batch_dim` arguments are valid. Negative values for `seq_dim` can result in stack overflow or `CHECK`-failure, depending on the version of Eigen code used to implement the operation. Similar behavior can be exhibited by invalid values of `batch_dim`. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.