A vulnerability in the email filtering mechanism of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to bypass the configured rules and allow emails that should have been denied to flow through an affected device.   This vulnerability is due to improper handling of email that passes through an affected device. An attacker could exploit this vulnerability by sending a crafted email through the affected device. A successful exploit could allow the attacker to bypass email filters on the affected device.

A vulnerability in Cisco Catalyst Center, formerly Cisco DNA Center, could allow an authenticated, remote attacker to read and modify data in a repository that belongs to an internal service of an affected device. This vulnerability is due to insufficient enforcement of access control on HTTP requests. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected device. A successful exploit could allow the attacker to read and modify data that is handled by an internal service on the affected device.

A vulnerability in the hybrid access control list (ACL) processing of IPv4 packets in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect handling of packets when a specific configuration of the hybrid ACL exists. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass a configured ACL on the affected device. For more information, see the section of this advisory. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.

A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface. This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.

A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.

The PPP implementation in Cisco IOS 12.2 and 15.0 through 15.2, when Point-to-Point Termination and Aggregation (PTA) and L2TP are used, allows remote attackers to cause a denial of service (device crash) via crafted network traffic, aka Bug ID CSCtf71673.

A vulnerability in the client forwarding code of multiple Cisco Access Points (APs) could allow an unauthenticated, adjacent attacker to inject packets from the native VLAN to clients within nonnative VLANs on an affected device. This vulnerability is due to a logic error on the AP that forwards packets that are destined to a wireless client if they are received on the native VLAN. An attacker could exploit this vulnerability by obtaining access to the native VLAN and directing traffic directly to the client through their MAC/IP combination. A successful exploit could allow the attacker to bypass VLAN separation and potentially also bypass any Layer 3 protection mechanisms that are deployed.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the access control list (ACL) processing on MPLS interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incomplete support for this feature. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication .

The web interface in Cisco FireSIGHT Management Center 5.3.1.4 allows remote attackers to delete arbitrary system policies via modified parameters in a POST request, aka Bug ID CSCuu25390.

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) improperly performs authorization, which allows remote authenticated users to remove default messaging-queue system folders via unspecified vectors, aka Bug ID CSCuo89046.

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) and 11.0(1) improperly performs authorization, which allows remote authenticated users to read or write to stored data via unspecified vectors, aka Bug ID CSCuo89056.

The Posture module for Cisco Identity Services Engine (ISE), as distributed in Cisco AnyConnect Secure Mobility Client 4.0(64), allows local users to gain privileges via unspecified commands, aka Bug ID CSCut05797.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to bypass authorization on an affected device and access sensitive information that is related to the device. The vulnerability exists because the affected software allows users to access resources that are intended for administrators only. An attacker could exploit this vulnerability by submitting a crafted URL to an affected device. A successful exploit could allow the attacker to add, delete, and edit certain network configurations in the same manner as a user with administrative privileges.

A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device.

A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.

Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an unauthenticated, remote attacker to read or write arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker could exploit this vulnerability by using a specific API endpoint to upload a file to an affected device. A successful exploit could allow the attacker to read or write arbitrary files on an affected device.

A vulnerability in the Zone-Based Policy Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent the Zone-Based Policy Firewall from correctly classifying traffic. This vulnerability exists because ICMP and UDP responder-to-initiator flows are not inspected when the Zone-Based Policy Firewall has either Unified Threat Defense (UTD) or Application Quality of Experience (AppQoE) configured. An attacker could exploit this vulnerability by attempting to send UDP or ICMP flows through the network. A successful exploit could allow the attacker to inject traffic through the Zone-Based Policy Firewall, resulting in traffic being dropped because it is incorrectly classified or in incorrect reporting figures being produced by high-speed logging (HSL).

Multiple vulnerabilities in Cisco Intersight Virtual Appliance could allow an unauthenticated, adjacent attacker to access sensitive internal services from an external interface. These vulnerabilities are due to insufficient restrictions for IPv4 or IPv6 packets that are received on the external management interface. An attacker could exploit these vulnerabilities by sending specific traffic to this interface on an affected device. A successful exploit could allow the attacker to access sensitive internal services and make configuration changes on the affected device.

A vulnerability in the IPv6 traffic processing of Cisco IOS XR Software and Cisco NX-OS Software for certain Cisco devices could allow an unauthenticated, remote attacker to bypass an IPv6 access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to improper processing of IPv6 traffic that is sent through an affected device. An attacker could exploit this vulnerability by sending crafted IPv6 packets that traverse the affected device. A successful exploit could allow the attacker to access resources that would typically be protected by the interface ACL.

A vulnerability in the Link Layer Discovery Protocol (LLDP) for Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, adjacent attacker to disable switching on a small form-factor pluggable (SFP) interface. This vulnerability is due to incomplete validation of the source of a received LLDP packet. An attacker could exploit this vulnerability by sending a crafted LLDP packet on an SFP interface to an affected device. A successful exploit could allow the attacker to disable switching on the SFP interface, which could disrupt network traffic.

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.

berriai/litellm version 1.34.34 is vulnerable to improper access control in its team management functionality. This vulnerability allows attackers to perform unauthorized actions such as creating, updating, viewing, deleting, blocking, and unblocking any teams, as well as adding or deleting any member to or from any teams. The vulnerability stems from insufficient access control checks in various team management endpoints, enabling attackers to exploit these functionalities without proper authorization.

An improper access control vulnerability exists in the lunary-ai/lunary repository, specifically within the versions.patch functionality for updating prompts. Affected versions include 1.2.2 up to but not including 1.2.25. The vulnerability allows unauthorized users to update prompt details due to insufficient access control checks. This issue was addressed and fixed in version 1.2.25.

bookstack is vulnerable to Improper Access Control

An authorization issue was discovered in GitLab EE < 12.1.2, < 12.0.4, and < 11.11.6 allowing the merge request approval rules to be overridden without appropriate permissions.

Adobe Commerce versions 2.4.7-p2, 2.4.6-p7, 2.4.5-p9, 2.4.4-p10 and earlier are affected by an Improper Access Control vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and have high impact on integrity. Exploitation of this issue does not require user interaction.

This vulnerability allows a normal (non-admin) user to disable the Forcepoint One Endpoint (versions 19.04 through 19.08) and bypass DLP and Web protection.

Azure DevOps Server Spoofing Vulnerability

Incorrect access control in the delete_category function of Sourcecodester Computer Laboratory Management System v1.0 allows authenticated attackers with low-level privileges to arbitrarily delete categories.

PublicCMS v4.0.202302.e was discovered to contain an arbitrary file content replacement vulnerability via the component /admin/cmsTemplate/replace.

Mattermost versions 9.9.x <= 9.9.0, 9.5.x <= 9.5.6, 9.7.x <= 9.7.5 and 9.8.x <= 9.8.1 fail to properly validate that the channel that comes from the sync message is a shared channel, when shared channels are enabled, which allows a malicious remote to add users to arbitrary teams and channels

A vulnerability classified as problematic was found in ThingsBoard up to 3.6.2. This vulnerability affects unknown code of the component AdvancedFeature. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-259282 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure and replied to be planning to fix this issue in version 3.7.

A flaw exists in Wordpress related to the 'wp-admin/press-this.php 'script improperly checking user permissions when publishing posts. This may allow a user with 'Contributor-level' privileges to post as if they had 'publish_posts' permission.

OpenObserve is a observability platform built specifically for logs, metrics, traces, analytics, designed to work at petabyte scale. A critical vulnerability has been identified in the "/api/{org_id}/users/{email_id}" endpoint. This vulnerability allows any authenticated user within an organization to remove any other user from that same organization, irrespective of their respective roles. This includes the ability to remove users with "Admin" and "Root" roles. By enabling any organizational member to unilaterally alter the user base, it opens the door to unauthorized access and can cause considerable disruptions in operations. The core of the vulnerability lies in the `remove_user_from_org` function in the user management system. This function is designed to allow organizational users to remove members from their organization. The function does not check if the user initiating the request has the appropriate administrative privileges to remove a user. Any user who is part of the organization, irrespective of their role, can remove any other user, including those with higher privileges. This vulnerability is categorized as an Authorization issue leading to Unauthorized User Removal. The impact is severe, as it compromises the integrity of user management within organizations. By exploiting this vulnerability, any user within an organization, without the need for administrative privileges, can remove critical users, including "Admins" and "Root" users. This could result in unauthorized system access, administrative lockout, or operational disruptions. Given that user accounts are typically created by "Admins" or "Root" users, this vulnerability can be exploited by any user who has been granted access to an organization, thereby posing a critical risk to the security and operational stability of the application. This issue has been addressed in release version 0.8.0. Users are advised to upgrade.

Mattermost versions 8.1.x before 8.1.11, 9.3.x before 9.3.3, 9.4.x before 9.4.4, and 9.5.x before 9.5.2 fail to authenticate the source of certain types of post actions, allowing an authenticated attacker to create posts as other users via a crafted post action.

The Realteo WordPress plugin before 1.2.4, used by the Findeo Theme, did not ensure that the requested property to be deleted belong to the user making the request, allowing any authenticated users to delete arbitrary properties by tampering with the property_id parameter.

phpMyFAQ is an open source FAQ web application for PHP 8.1+ and MySQL, PostgreSQL and other databases. phpMyFAQ's user removal page allows an attacker to spoof another user's detail, and in turn make a compelling phishing case for removing another user's account. The front-end of this page doesn't allow changing the form details, an attacker can utilize a proxy to intercept this request and submit other data. Upon submitting this form, an email is sent to the administrator informing them that this user wants to delete their account. An administrator has no way of telling the difference between the actual user wishing to delete their account or the attacker issuing this for an account they do not control. This issue has been patched in version 3.2.5.

SiberianCMS - CWE-284 Improper Access Control Authorized user may disable a security feature over the network

IBM SOAR QRadar Plugin App 1.0 through 5.0.3 could allow an authenticated user to perform unauthorized actions due to improper access controls. IBM X-Force ID: 260577.

Improper access control in Odoo Community 14.0 and earlier and Odoo Enterprise 14.0 and earlier, allows remote authenticated users with access to contact management to modify user accounts, leading to privilege escalation.

Apache Airflow, versions before 2.8.0, is affected by a vulnerability that allows an authenticated user without the variable edit permission, to update a variable. This flaw compromises the integrity of variable management, potentially leading to unauthorized data modification. Users are recommended to upgrade to 2.8.0, which fixes this issue

DHIS2 Core contains the service layer and Web API for DHIS2, an information system for data capture. Starting in the 2.36 branch and prior to versions 2.37.9.1, 2.38.3.1, and 2.39.1.2, using object model traversal in the payload of a PATCH request, authenticated users with write access to an object may be able to modify related objects that they should not have access to. DHIS2 implementers should upgrade to a supported version of DHIS2 to receive a patch: 2.37.9.1, 2.38.3.1, or 2.39.1.2. It is possible to work around this issue by blocking all PATCH requests on a reverse proxy, but this may cause some issues with the functionality of built-in applications using legacy PATCH requests.

An improper access control vulnerability exists in lunary-ai/lunary at the latest commit (a761d83) on the main branch. The vulnerability allows an attacker to use the auth tokens issued by the 'invite user' functionality to obtain valid JWT tokens. These tokens can be used to compromise target users upon registration for their own arbitrary organizations. The attacker can invite a target email, obtain a one-time use token, retract the invite, and later use the token to reset the password of the target user, leading to full account takeover.