In the Linux kernel, the following vulnerability has been resolved: ibmvnic: free reset-work-item when flushing Fix a tiny memory leak when flushing the reset work queue.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get() We should call of_node_put() for the reference returned by of_parse_phandle() in fail path or when it is not used anymore. Here we only need to move the of_node_put() before the check.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: use the correct logic to get mma8452_data The original logic to get mma8452_data is wrong, the *dev point to the device belong to iio_dev. we can't use this dev to find the correct i2c_client. The original logic happen to work because it finally use dev->driver_data to get iio_dev. Here use the API to_i2c_client() is wrong and make reader confuse. To correct the logic, it should be like this struct mma8452_data *data = iio_priv(dev_get_drvdata(dev)); But after commit 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata"), the upper logic also can't work. When try to show the avialable scale in userspace, will meet kernel dump, kernel handle NULL pointer dereference. So use dev_to_iio_dev() to correct the logic. Dual fixes tags as the second reflects when the bug was exposed, whilst the first reflects when the original bug was introduced.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probe This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: firmware: sysfb: fix platform-device leak in error path Make sure to free the platform device also in the unlikely event that registration fails.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix not cleanup led when bt_init fails bt_init() calls bt_leds_init() to register led, but if it fails later, bt_leds_cleanup() is not called to unregister it. This can cause panic if the argument "bluetooth-power" in text is freed and then another led_trigger_register() tries to access it: BUG: unable to handle page fault for address: ffffffffc06d3bc0 RIP: 0010:strcmp+0xc/0x30 Call Trace: <TASK> led_trigger_register+0x10d/0x4f0 led_trigger_register_simple+0x7d/0x100 bt_init+0x39/0xf7 [bluetooth] do_one_initcall+0xd0/0x4e0

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Don't unregister on shutdown Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path.

In the Linux kernel, the following vulnerability has been resolved: net: asix: add proper error handling of usb read errors Syzbot once again hit uninit value in asix driver. The problem still the same -- asix_read_cmd() reads less bytes, than was requested by caller. Since all read requests are performed via asix_read_cmd() let's catch usb related error there and add __must_check notation to be sure all callers actually check return value. So, this patch adds sanity check inside asix_read_cmd(), that simply checks if bytes read are not less, than was requested and adds missing error handling of asix_read_cmd() all across the driver code.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix missing free nid in f2fs_handle_failed_inode This patch fixes xfstests/generic/475 failure. [ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix. [ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691764] sh (7615): drop_caches: 3 [ 293.691819] sh (7616): drop_caches: 3 [ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read [ 293.695659] sh (7618): drop_caches: 3 [ 293.696979] sh (7617): drop_caches: 3 [ 293.700290] sh (7623): drop_caches: 3 [ 293.708621] sh (7626): drop_caches: 3 [ 293.711386] sh (7628): drop_caches: 3 [ 293.711825] sh (7627): drop_caches: 3 [ 293.716738] sh (7630): drop_caches: 3 [ 293.719613] sh (7632): drop_caches: 3 [ 293.720971] sh (7633): drop_caches: 3 [ 293.727741] sh (7634): drop_caches: 3 [ 293.730783] sh (7636): drop_caches: 3 [ 293.732681] sh (7635): drop_caches: 3 [ 293.732988] sh (7637): drop_caches: 3 [ 293.738836] sh (7639): drop_caches: 3 [ 293.740568] sh (7641): drop_caches: 3 [ 293.743053] sh (7640): drop_caches: 3 [ 293.821889] ------------[ cut here ]------------ [ 293.824654] kernel BUG at fs/f2fs/node.c:3334! [ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1 [ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs] [ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b [ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202 [ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072 [ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21 [ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072 [ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00 [ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8 [ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000 [ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0 [ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 293.858380] Call Trace: [ 293.859302] <TASK> [ 293.860311] ? ttwu_do_wakeup+0x1c/0x170 [ 293.861800] ? ttwu_do_activate+0x6d/0xb0 [ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40 [ 293.864411] ? try_to_wake_up+0x9d/0x5e0 [ 293.865618] ? debug_smp_processor_id+0x17/0x20 [ 293.866934] ? debug_smp_processor_id+0x17/0x20 [ 293.868223] ? free_unref_page+0xbf/0x120 [ 293.869470] ? __free_slab+0xcb/0x1c0 [ 293.870614] ? preempt_count_add+0x7a/0xc0 [ 293.871811] ? __slab_free+0xa0/0x2d0 [ 293.872918] ? __wake_up_common_lock+0x8a/0xc0 [ 293.874186] ? __slab_free+0xa0/0x2d0 [ 293.875305] ? free_inode_nonrcu+0x20/0x20 [ 293.876466] ? free_inode_nonrcu+0x20/0x20 [ 293.877650] ? debug_smp_processor_id+0x17/0x20 [ 293.878949] ? call_rcu+0x11a/0x240 [ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs] [ 293.881437] ? kfree+0x1fe/0x230 [ 293.882674] f2fs_put_super+0x160/0x390 [f2fs] [ 293.883978] generic_shutdown_super+0x7a/0x120 [ 293.885274] kill_block_super+0x27/0x50 [ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs] [ 293.887806] deactivate_locked_super+0x35/0xa0 [ 293.889271] deactivate_super+0x40/0x50 [ 293.890513] cleanup_mnt+0x139/0x190 [ 293.891689] __cleanup_mnt+0x12/0x20 [ 293.892850] task_work_run+0x64/0xa0 [ 293.894035] exit_to_user_mode_prepare+0x1b7/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bcache: avoid journal no-space deadlock by reserving 1 journal bucket The journal no-space deadlock was reported time to time. Such deadlock can happen in the following situation. When all journal buckets are fully filled by active jset with heavy write I/O load, the cache set registration (after a reboot) will load all active jsets and inserting them into the btree again (which is called journal replay). If a journaled bkey is inserted into a btree node and results btree node split, new journal request might be triggered. For example, the btree grows one more level after the node split, then the root node record in cache device super block will be upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no space in journal buckets, the journal replay has to wait for new journal bucket to be reclaimed after at least one journal bucket replayed. This is one example that how the journal no-space deadlock happens. The solution to avoid the deadlock is to reserve 1 journal bucket in run time, and only permit the reserved journal bucket to be used during cache set registration procedure for things like journal replay. Then the journal space will never be fully filled, there is no chance for journal no-space deadlock to happen anymore. This patch adds a new member "bool do_reserve" in struct journal, it is inititalized to 0 (false) when struct journal is allocated, and set to 1 (true) by bch_journal_space_reserve() when all initialization done in run_cache_set(). In the run time when journal_reclaim() tries to allocate a new journal bucket, free_journal_buckets() is called to check whether there are enough free journal buckets to use. If there is only 1 free journal bucket and journal->do_reserve is 1 (true), the last bucket is reserved and free_journal_buckets() will return 0 to indicate no free journal bucket. Then journal_reclaim() will give up, and try next time to see whetheer there is free journal bucket to allocate. By this method, there is always 1 jouranl bucket reserved in run time. During the cache set registration, journal->do_reserve is 0 (false), so the reserved journal bucket can be used to avoid the no-space deadlock.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes() Commit da87878010e5 ("mm/damon/sysfs: support online inputs update") made 'damon_sysfs_set_schemes()' to be called for running DAMON context, which could have schemes. In the case, DAMON sysfs interface is supposed to update, remove, or add schemes to reflect the sysfs files. However, the code is assuming the DAMON context wouldn't have schemes at all, and therefore creates and adds new schemes. As a result, the code doesn't work as intended for online schemes tuning and could have more than expected memory footprint. The schemes are all in the DAMON context, so it doesn't leak the memory, though. Remove the wrong asssumption (the DAMON context wouldn't have schemes) in 'damon_sysfs_set_schemes()' to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018

In the Linux kernel, the following vulnerability has been resolved: mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0) If an mremap() syscall with old_size=0 ends up in move_page_tables(), it will call invalidate_range_start()/invalidate_range_end() unnecessarily, i.e. with an empty range. This causes a WARN in KVM's mmu_notifier. In the past, empty ranges have been diagnosed to be off-by-one bugs, hence the WARNing. Given the low (so far) number of unique reports, the benefits of detecting more buggy callers seem to outweigh the cost of having to fix cases such as this one, where userspace is doing something silly. In this particular case, an early return from move_page_tables() is enough to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: initialize registers in nft_do_chain() Initialize registers to avoid stack leak into userspace.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix inode reference leakage in ceph_get_snapdir() The ceph_get_inode() will search for or insert a new inode into the hash for the given vino, and return a reference to it. If new is non-NULL, its reference is consumed. We should release the reference when in error handing cases.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Guard against invalid local ports When processing events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not for the CPU port (local port 0), which exists, but does not have all the fields as any local port. This can result in a NULL pointer dereference when trying access 'struct mlxsw_sp_port' fields which are not initialized for CPU port. Commit 63b08b1f6834 ("mlxsw: spectrum: Protect driver from buggy firmware") already handled such issue by bailing early when processing a PUDE event reported for the CPU port. Generalize the approach by moving the check to a common function and making use of it in all relevant places.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd syzbot got a new report [1] finally pointing to a very old bug, added in initial support for MTU probing. tcp_mtu_probe() has checks about starting an MTU probe if tcp_snd_cwnd(tp) >= 11. But nothing prevents tcp_snd_cwnd(tp) to be reduced later and before the MTU probe succeeds. This bug would lead to potential zero-divides. Debugging added in commit 40570375356c ("tcp: add accessors to read/set tp->snd_cwnd") has paid off :) While we are at it, address potential overflows in this code. [1] WARNING: CPU: 1 PID: 14132 at include/net/tcp.h:1219 tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Modules linked in: CPU: 1 PID: 14132 Comm: syz-executor.2 Not tainted 5.18.0-syzkaller-07857-gbabf0bb978e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_snd_cwnd_set include/net/tcp.h:1219 [inline] RIP: 0010:tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Code: 74 08 48 89 ef e8 da 80 17 f9 48 8b 45 00 65 48 ff 80 80 03 00 00 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 aa b0 c5 f8 <0f> 0b e9 16 fe ff ff 48 8b 4c 24 08 80 e1 07 38 c1 0f 8c c7 fc ff RSP: 0018:ffffc900079e70f8 EFLAGS: 00010287 RAX: ffffffff88c0f7f6 RBX: ffff8880756e7a80 RCX: 0000000000040000 RDX: ffffc9000c6c4000 RSI: 0000000000031f9e RDI: 0000000000031f9f RBP: 0000000000000000 R08: ffffffff88c0f606 R09: ffffc900079e7520 R10: ffffed101011226d R11: 1ffff1101011226c R12: 1ffff1100eadcf50 R13: ffff8880756e72c0 R14: 1ffff1100eadcf89 R15: dffffc0000000000 FS: 00007f643236e700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ab3f1e2a0 CR3: 0000000064fe7000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_clean_rtx_queue+0x223a/0x2da0 net/ipv4/tcp_input.c:3356 tcp_ack+0x1962/0x3c90 net/ipv4/tcp_input.c:3861 tcp_rcv_established+0x7c8/0x1ac0 net/ipv4/tcp_input.c:5973 tcp_v6_do_rcv+0x57b/0x1210 net/ipv6/tcp_ipv6.c:1476 sk_backlog_rcv include/net/sock.h:1061 [inline] __release_sock+0x1d8/0x4c0 net/core/sock.c:2849 release_sock+0x5d/0x1c0 net/core/sock.c:3404 sk_stream_wait_memory+0x700/0xdc0 net/core/stream.c:145 tcp_sendmsg_locked+0x111d/0x3fc0 net/ipv4/tcp.c:1410 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1448 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x439/0x5c0 net/socket.c:2119 __do_sys_sendto net/socket.c:2131 [inline] __se_sys_sendto net/socket.c:2127 [inline] __x64_sys_sendto+0xda/0xf0 net/socket.c:2127 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6431289109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f643236e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f643139c100 RCX: 00007f6431289109 RDX: 00000000d0d0c2ac RSI: 0000000020000080 RDI: 000000000000000a RBP: 00007f64312e308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff372533af R14: 00007f643236e300 R15: 0000000000022000

In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: fix memory leak in int3400_notify() It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping() After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion.

In the Linux kernel, the following vulnerability has been resolved: sched/debug: fix dentry leak in update_sched_domain_debugfs Kuyo reports that the pattern of using debugfs_remove(debugfs_lookup()) leaks a dentry and with a hotplug stress test, the machine eventually runs out of memory. Fix this up by using the newly created debugfs_lookup_and_remove() call instead which properly handles the dentry reference counting logic.

In the Linux kernel, the following vulnerability has been resolved: efi: fix NULL-deref in init error path In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Use stronger register read/writes to assure ordering GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like: [ 210.074549] ------------[ cut here ]------------ [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240 [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat] [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110 [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58 [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters [ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022 [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 210.161358] pc : dev_watchdog+0x234/0x240 [ 210.161364] lr : dev_watchdog+0x234/0x240 [ 210.161368] sp : ffff8000080a3a40 [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20 [ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08 [ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000 [ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0 [ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c [ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000 [ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000 [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044 [ 210.269682] Call trace: [ 210.272133] dev_watchdog+0x234/0x240 [ 210.275811] call_timer_fn+0x3c/0x15c [ 210.279489] __run_timers.part.0+0x288/0x310 [ 210.283777] run_timer_softirq+0x48/0x80 [ 210.287716] __do_softirq+0x128/0x360 [ 210.291392] __irq_exit_rcu+0x138/0x140 [ 210.295243] irq_exit_rcu+0x1c/0x30 [ 210.298745] el1_interrupt+0x38/0x54 [ 210.302334] el1h_64_irq_handler+0x18/0x24 [ 210.306445] el1h_64_irq+0x7c/0x80 [ 210.309857] arch_cpu_idle+0x18/0x2c [ 210.313445] default_idle_call+0x4c/0x140 [ 210.317470] cpuidle_idle_call+0x14c/0x1a0 [ 210.321584] do_idle+0xb0/0x100 [ 210.324737] cpu_startup_entry+0x30/0x8c [ 210.328675] secondary_start_kernel+0xe4/0x110 [ 210.333138] __secondary_switched+0x94/0x98 The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations. Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere. Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path of_icc_get() alloc resources for path1, we should release it when not need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1. Defer getting path1 to fix this. Patchwork: https://patchwork.freedesktop.org/patch/514264/

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix I/O page table memory leak The current logic updates the I/O page table mode for the domain before calling the logic to free memory used for the page table. This results in IOMMU page table memory leak, and can be observed when launching VM w/ pass-through devices. Fix by freeing the memory used for page table before updating the mode.

In the Linux kernel, the following vulnerability has been resolved: bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack() task_pt_regs() can return NULL on powerpc for kernel threads. This is then used in __bpf_get_stack() to check for user mode, resulting in a kernel oops. Guard against this by checking return value of task_pt_regs() before trying to obtain the call chain.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in sk_psock_queue_msg If tcp_bpf_sendmsg is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it. sk1 (redirect sk2) sk2 ------------------- --------------- tcp_bpf_sendmsg() tcp_bpf_send_verdict() tcp_bpf_sendmsg_redir() bpf_tcp_ingress() sock_map_close() lock_sock() lock_sock() ... blocking sk_psock_stop sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED); release_sock(sk); lock_sock() sk_mem_charge() get_page() sk_psock_queue_msg() sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED); drop_sk_msg() release_sock() While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge and has sg pages need to put. To fix we use sk_msg_free() and then kfee() msg. This issue can cause the following info: WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0 Call Trace: <IRQ> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xe5f/0xe90 ? sk_filter_trim_cap+0x10d/0x230 ? tcp_v4_do_rcv+0x161/0x250 tcp_v4_do_rcv+0x161/0x250 tcp_v4_rcv+0xc3a/0xce0 ip_protocol_deliver_rcu+0x3d/0x230 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0xfd/0x110 ? ip_protocol_deliver_rcu+0x230/0x230 ip_rcv+0xd6/0x100 ? ip_local_deliver+0x110/0x110 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0xa4/0x160 __napi_poll+0x29/0x1b0 net_rx_action+0x287/0x300 __do_softirq+0xff/0x2fc do_softirq+0x79/0x90 </IRQ> WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: regulator: da9211: Use irq handler when ready If the system does not come from reset (like when it is kexec()), the regulator might have an IRQ waiting for us. If we enable the IRQ handler before its structures are ready, we crash. This patch fixes: [ 1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078 [ 1.316096] Call trace: [ 1.316101] blocking_notifier_call_chain+0x20/0xa8 [ 1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.327823] regulator_notifier_call_chain+0x1c/0x2c [ 1.327825] da9211_irq_handler+0x68/0xf8 [ 1.327829] irq_thread+0x11c/0x234 [ 1.327833] kthread+0x13c/0x154

In the Linux kernel, the following vulnerability has been resolved: drivers: tty: serial: Fix deadlock in sa1100_set_termios() There is a deadlock in sa1100_set_termios(), which is shown below: (Thread 1) | (Thread 2) | sa1100_enable_ms() sa1100_set_termios() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | sa1100_timeout() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold sport->port.lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need sport->port.lock in position (2) of thread 2. As a result, sa1100_set_termios() will block forever. This patch moves del_timer_sync() before spin_lock_irqsave() in order to prevent the deadlock.

In the Linux kernel, the following vulnerability has been resolved: Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send() There is a kmemleak when test the raydium_i2c_ts with bpf mock device: unreferenced object 0xffff88812d3675a0 (size 8): comm "python3", pid 349, jiffies 4294741067 (age 95.695s) hex dump (first 8 bytes): 11 0e 10 c0 01 00 04 00 ........ backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff88812d3675c8 (size 8): comm "python3", pid 349, jiffies 4294741070 (age 95.692s) hex dump (first 8 bytes): 22 00 36 2d 81 88 ff ff ".6-.... backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 After BANK_SWITCH command from i2c BUS, no matter success or error happened, the tx_buf should be freed.

In the Linux kernel, the following vulnerability has been resolved: kernel/resource: fix kfree() of bootmem memory again Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case.

In the Linux kernel, the following vulnerability has been resolved: platform/surface: aggregator: Add missing call to ssam_request_sync_free() Although rare, ssam_request_sync_init() can fail. In that case, the request should be freed via ssam_request_sync_free(). Currently it is leaked instead. Fix this.

In the Linux kernel, the following vulnerability has been resolved: i2c: dev: check return value when calling dev_set_name() If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove() The cmd_buff needs to be freed when error happened in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove().

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command stats access after free Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix list corruption in perf_cgroup_switch() There's list corruption on cgrp_cpuctx_list. This happens on the following path: perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list) cpu_ctx_sched_in ctx_sched_in ctx_pinned_sched_in merge_sched_in perf_cgroup_event_disable: remove the event from the list Use list_for_each_entry_safe() to allow removing an entry during iteration.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix u8 overflow By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@...

In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type In zynqmp_dma_alloc/free_chan_resources functions there is a potential overflow in the below expressions. dma_alloc_coherent(chan->dev, (2 * chan->desc_size * ZYNQMP_DMA_NUM_DESCS), &chan->desc_pool_p, GFP_KERNEL); dma_free_coherent(chan->dev,(2 * ZYNQMP_DMA_DESC_SIZE(chan) * ZYNQMP_DMA_NUM_DESCS), chan->desc_pool_v, chan->desc_pool_p); The arguments desc_size and ZYNQMP_DMA_NUM_DESCS were 32 bit. Though this overflow condition is not observed but it is a potential problem in the case of 32-bit multiplication. Hence fix it by changing the desc_size data type to size_t. In addition to coverity fix it also reuse ZYNQMP_DMA_DESC_SIZE macro in dma_alloc_coherent API argument. Addresses-Coverity: Event overflow_before_widen.

In the Linux kernel, the following vulnerability has been resolved: f2fs: Require FMODE_WRITE for atomic write ioctls The F2FS ioctls for starting and committing atomic writes check for inode_owner_or_capable(), but this does not give LSMs like SELinux or Landlock an opportunity to deny the write access - if the caller's FSUID matches the inode's UID, inode_owner_or_capable() immediately returns true. There are scenarios where LSMs want to deny a process the ability to write particular files, even files that the FSUID of the process owns; but this can currently partially be bypassed using atomic write ioctls in two ways: - F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can truncate an inode to size 0 - F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert changes another process concurrently made to a file Fix it by requiring FMODE_WRITE for these operations, just like for F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these ioctls when intending to write into the file, that seems unlikely to break anything.

A flaw NULL Pointer Dereference in the Linux kernel NTFS3 driver function attr_punch_hole() was found. A local user could use this flaw to crash the system.

In the Linux kernel, the following vulnerability has been resolved: nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1.

In the Linux kernel, the following vulnerability has been resolved: iommu/omap: Fix regression in probe for NULL pointer dereference Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started triggering a NULL pointer dereference for some omap variants: __iommu_probe_device from probe_iommu_group+0x2c/0x38 probe_iommu_group from bus_for_each_dev+0x74/0xbc bus_for_each_dev from bus_iommu_probe+0x34/0x2e8 bus_iommu_probe from bus_set_iommu+0x80/0xc8 bus_set_iommu from omap_iommu_init+0x88/0xcc omap_iommu_init from do_one_initcall+0x44/0x24 This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV) as noted by Jason Gunthorpe <jgg@ziepe.ca>. Looks like the regression already happened with an earlier commit 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") that changed the function return type and missed converting one place.

In the Linux kernel, the following vulnerability has been resolved: MIPS: pgalloc: fix memory leak caused by pgd_free() pgd page is freed by generic implementation pgd_free() since commit f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"), however, there are scenarios that the system uses more than one page as the pgd table, in such cases the generic implementation pgd_free() won't be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER" will be set as "1", which will cause allocating two pages as the pgd table. Well, at the same time, the generic implementation pgd_free() just free one pgd page, which will result in the memory leak. The memory leak can be easily detected by executing shell command: "while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check for potential null return of kmalloc_array() As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference. Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix hang during unmount when stopping a space reclaim worker Often when running generic/562 from fstests we can hang during unmount, resulting in a trace like this: Sep 07 11:52:00 debian9 unknown: run fstests generic/562 at 2022-09-07 11:52:00 Sep 07 11:55:32 debian9 kernel: INFO: task umount:49438 blocked for more than 120 seconds. Sep 07 11:55:32 debian9 kernel: Not tainted 6.0.0-rc2-btrfs-next-122 #1 Sep 07 11:55:32 debian9 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Sep 07 11:55:32 debian9 kernel: task:umount state:D stack: 0 pid:49438 ppid: 25683 flags:0x00004000 Sep 07 11:55:32 debian9 kernel: Call Trace: Sep 07 11:55:32 debian9 kernel: <TASK> Sep 07 11:55:32 debian9 kernel: __schedule+0x3c8/0xec0 Sep 07 11:55:32 debian9 kernel: ? rcu_read_lock_sched_held+0x12/0x70 Sep 07 11:55:32 debian9 kernel: schedule+0x5d/0xf0 Sep 07 11:55:32 debian9 kernel: schedule_timeout+0xf1/0x130 Sep 07 11:55:32 debian9 kernel: ? lock_release+0x224/0x4a0 Sep 07 11:55:32 debian9 kernel: ? lock_acquired+0x1a0/0x420 Sep 07 11:55:32 debian9 kernel: ? trace_hardirqs_on+0x2c/0xd0 Sep 07 11:55:32 debian9 kernel: __wait_for_common+0xac/0x200 Sep 07 11:55:32 debian9 kernel: ? usleep_range_state+0xb0/0xb0 Sep 07 11:55:32 debian9 kernel: __flush_work+0x26d/0x530 Sep 07 11:55:32 debian9 kernel: ? flush_workqueue_prep_pwqs+0x140/0x140 Sep 07 11:55:32 debian9 kernel: ? trace_clock_local+0xc/0x30 Sep 07 11:55:32 debian9 kernel: __cancel_work_timer+0x11f/0x1b0 Sep 07 11:55:32 debian9 kernel: ? close_ctree+0x12b/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? __trace_bputs+0x10b/0x170 Sep 07 11:55:32 debian9 kernel: close_ctree+0x152/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? evict_inodes+0x166/0x1c0 Sep 07 11:55:32 debian9 kernel: generic_shutdown_super+0x71/0x120 Sep 07 11:55:32 debian9 kernel: kill_anon_super+0x14/0x30 Sep 07 11:55:32 debian9 kernel: btrfs_kill_super+0x12/0x20 [btrfs] Sep 07 11:55:32 debian9 kernel: deactivate_locked_super+0x2e/0xa0 Sep 07 11:55:32 debian9 kernel: cleanup_mnt+0x100/0x160 Sep 07 11:55:32 debian9 kernel: task_work_run+0x59/0xa0 Sep 07 11:55:32 debian9 kernel: exit_to_user_mode_prepare+0x1a6/0x1b0 Sep 07 11:55:32 debian9 kernel: syscall_exit_to_user_mode+0x16/0x40 Sep 07 11:55:32 debian9 kernel: do_syscall_64+0x48/0x90 Sep 07 11:55:32 debian9 kernel: entry_SYSCALL_64_after_hwframe+0x63/0xcd Sep 07 11:55:32 debian9 kernel: RIP: 0033:0x7fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RSP: 002b:00007ffe914217c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 Sep 07 11:55:32 debian9 kernel: RAX: 0000000000000000 RBX: 00007fcde5ae8264 RCX: 00007fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b57556cdd0 Sep 07 11:55:32 debian9 kernel: RBP: 000055b57556cba0 R08: 0000000000000000 R09: 00007ffe91420570 Sep 07 11:55:32 debian9 kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 Sep 07 11:55:32 debian9 kernel: R13: 000055b57556cdd0 R14: 000055b57556ccb8 R15: 0000000000000000 Sep 07 11:55:32 debian9 kernel: </TASK> What happens is the following: 1) The cleaner kthread tries to start a transaction to delete an unused block group, but the metadata reservation can not be satisfied right away, so a reservation ticket is created and it starts the async metadata reclaim task (fs_info->async_reclaim_work); 2) Writeback for all the filler inodes with an i_size of 2K starts (generic/562 creates a lot of 2K files with the goal of filling metadata space). We try to create an inline extent for them, but we fail when trying to insert the inline extent with -ENOSPC (at cow_file_range_inline()) - since this is not critical, we fallback to non-inline mode (back to cow_file_range()), reserve extents ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ath11k: pci: fix crash on suspend if board file is not found Mario reported that the kernel was crashing on suspend if ath11k was not able to find a board file: [ 473.693286] PM: Suspending system (s2idle) [ 473.693291] printk: Suspending console(s) (use no_console_suspend to debug) [ 474.407787] BUG: unable to handle page fault for address: 0000000000002070 [ 474.407791] #PF: supervisor read access in kernel mode [ 474.407794] #PF: error_code(0x0000) - not-present page [ 474.407798] PGD 0 P4D 0 [ 474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G W 5.16.0 #248 [...] [ 474.407868] Call Trace: [ 474.407870] <TASK> [ 474.407874] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 474.407882] ? lock_timer_base+0x72/0xa0 [ 474.407889] ? _raw_spin_unlock_irqrestore+0x29/0x3d [ 474.407892] ? try_to_del_timer_sync+0x54/0x80 [ 474.407896] ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k] [ 474.407912] ath11k_core_suspend+0x34/0x130 [ath11k] [ 474.407923] ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci] [ 474.407928] pci_pm_suspend+0x7e/0x170 [ 474.407935] ? pci_pm_freeze+0xc0/0xc0 [ 474.407939] dpm_run_callback+0x4e/0x150 [ 474.407947] __device_suspend+0x148/0x4c0 [ 474.407951] async_suspend+0x20/0x90 dmesg-efi-164255130401001: Oops#1 Part1 [ 474.407955] async_run_entry_fn+0x33/0x120 [ 474.407959] process_one_work+0x220/0x3f0 [ 474.407966] worker_thread+0x4a/0x3d0 [ 474.407971] kthread+0x17a/0x1a0 [ 474.407975] ? process_one_work+0x3f0/0x3f0 [ 474.407979] ? set_kthread_struct+0x40/0x40 [ 474.407983] ret_from_fork+0x22/0x30 [ 474.407991] </TASK> The issue here is that board file loading happens after ath11k_pci_probe() succesfully returns (ath11k initialisation happends asynchronously) and the suspend handler is still enabled, of course failing as ath11k is not properly initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and resume. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

In the Linux kernel, the following vulnerability has been resolved: media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED If the callback 'start_streaming' fails, then all queued buffers in the driver should be returned with state 'VB2_BUF_STATE_QUEUED'. Currently, they are returned with 'VB2_BUF_STATE_ERROR' which is wrong. Fix this. This also fixes the warning: [ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6 [ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14 [ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT) [ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common] [ 65.592395] sp : ffff800012bc3ad0 [ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8 [ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612 [ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0 [ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff [ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78 [ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce [ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228 [ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78 [ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880 [ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0 [ 65.598940] Call trace: [ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common] [ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2] [ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2] [ 65.601103] v4l_streamon+0x3c/0x50 [videodev] [ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev] [ 65.601977] video_usercopy+0x320/0x828 [videodev] [ 65.602419] video_ioctl2+0x3c/0x58 [videodev] [ 65.602830] v4l2_ioctl+0x60/0x90 [videodev] [ 65.603227] __arm64_sys_ioctl+0xa8/0xe0 [ 65.603576] invoke_syscall+0x54/0x118 [ 65.603911] el0_svc_common.constprop.3+0x84/0x100 [ 65.604332] do_el0_svc+0x34/0xa0 [ 65.604625] el0_svc+0x1c/0x50 [ 65.604897] el0t_64_sync_handler+0x88/0xb0 [ 65.605264] el0t_64_sync+0x16c/0x170 [ 65.605587] ---[ end trace 578e0ba07742170d ]---

In the Linux kernel, the following vulnerability has been resolved: ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail. For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this. [ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 00000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync when successful. pm_runtime_get_sync returns -error code on failure and 0 on successful resume but also 1 when the device is already active. So the common case for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls to pm_runtime_put in the call-chain so that pm_runtime_put is called one too many times and as result leaving the cpsw dev behind suspended. The suspended cpsw dev leads to an access violation later on by different parts of the cpsw driver. Fix this by calling the return-friendly pm_runtime_resume_and_get function.