Vulnerabilities in the web-based management interface of ClearPass Policy Manager allow an attacker with read-only privileges to perform actions that change the state of the ClearPass Policy Manager instance. Successful exploitation of these vulnerabilities allow an attacker to complete state-changing actions in the web-based management interface that should not be allowed by their current level of authorization on the platform.

A vulnerability in the web-based management interface of HPE Aruba Networking Fabric Composer could allow an authenticated low privilege operator user to perform operations not allowed by their privilege level. Successful exploitation could allow an attacker to manipulate user generated files, potentially leading to unauthorized changes in critical system configurations.

A vulnerability exists in an Orchestrator service that could allow an unauthenticated remote attacker to bypass multi-factor authentication requirements. Successful exploitation could allow an attacker to create an admin user account without the necessary multi-factor authentication, thereby compromising the integrity of secured access to the system.

An authenticated attacker can impact the integrity of the ArubaOS bootloader on 7xxx series controllers. Successful exploitation can compromise the hardware chain of trust on the impacted controller.

Insufficient Verification of Data Authenticity vulnerability in Hewlett Packard Enterprise HPE Nimble Storage Hybrid Flash Arrays and Nimble Storage Secondary Flash Arrays.

An authenticated vulnerability has been identified allowing an attacker to effectively establish highly privileged persistent arbitrary code execution across boot cycles.

A vulnerability in the secure boot implementation on affected Aruba 9200 and 9000 Series Controllers and Gateways allows an attacker to bypass security controls which would normally prohibit unsigned kernel images from executing. An attacker can use this vulnerability to execute arbitrary runtime operating systems, including unverified and unsigned OS images.

A vulnerability in the web-based management interface of ClearPass Policy Manager allows an attacker with read-only privileges to perform actions that change the state of the ClearPass Policy Manager instance. Successful exploitation of this vulnerability allows an attacker to complete state-changing actions in the web-based management interface that should not be allowed by their current level of authorization on the platform.

A vulnerability in the firewall component of HPE Aruba Networking CX 10000 Series Switches exists. It could allow an unauthenticated adjacent attacker to conduct a packet forwarding attack against the ICMP and UDP protocol. For this attack to be successful an attacker requires a switch configuration that allows packets routing (at layer 3). Configurations that do not allow network traffic routing are not impacted. Successful exploitation could allow an attacker to bypass security policies, potentially leading to unauthorized data exposure.

A remote authentication restriction bypass vulnerability was discovered in Aruba AirWave Management Platform version(s): Prior to 8.2.12.0. A vulnerability in the AirWave web-based management interface could allow an authenticated remote attacker to improperly access and modify devices and management user details. A successful exploit would consist of an attacker using a lower privileged account to change management user or device details. This could allow the attacker to escalate privileges and/or change network details that they should not have access to.

A vulnerability has been identified in the port ACL functionality of AOS-CX software running on the HPE Aruba Networking CX 9300 Switch Series only and affects: - AOS-CX 10.14.xxxx : All patches - AOS-CX 10.15.xxxx : 10.15.1000 and below The vulnerability is specific to traffic originated by the CX 9300 switch platform and could allow an attacker to bypass ACL rules applied to routed ports on egress. As a result, port ACLs are not correctly enforced, which could lead to unauthorized traffic flow and violations of security policies. Egress VLAN ACLs and Routed VLAN ACLs are not affected by this vulnerability.

Aruba ClearPass Policy Manager guest authorization failure. Certain administrative operations in ClearPass Guest do not properly enforce authorization rules, which allows any authenticated administrative user to execute those operations regardless of privilege level. This could allow low-privilege users to view, modify, or delete guest users. Resolution: Fixed in 6.7.6 and 6.6.10-hotfix.

Tahoe-LAFS v1.3.0 through v1.8.2 could allow unauthorized users to delete immutable files in some cases.

WeKan versions prior to 8.19 contain an authorization vulnerability where certain card update API paths validate only board read access rather than requiring write permission. This can allow users with read-only roles to perform card updates that should require write access.

Incorrect authorization in GitLab EE affecting all versions from 12.0 before 14.9.5, all versions starting from 14.10 before 14.10.4, all versions starting from 15.0 before 15.0.1 allowed an attacker already in possession of a valid Project Deploy Token to misuse it from any location even when IP address restrictions were configured

Due to improper authorization, Red Hat Single Sign-On is vulnerable to users performing actions that they should not be allowed to perform. It was possible to add users to the master realm even though no respective permission was granted.

Improper Access Control in Pypi calibreweb prior to 0.6.16.

Gogs is an open source self-hosted Git service. In version 0.13.3 and prior, the endpoint "PUT /repos/:owner/:repo/contents/*" does not require write permissions and allows access with read permission only via repoAssignment(). After passing the permission check, PutContents() invokes UpdateRepoFile(), which results in commit creation and the execution of git push. As a result, a token with read-only permission can be used to modify repository contents. This issue has been patched in versions 0.13.4 and 0.14.0+dev.

A vulnerability has been identified in Mendix Applications using Mendix 8 (All versions < V8.18.13), Mendix Applications using Mendix 9 (All versions < V9.6.2). Applications built with affected versions of Mendix Studio Pro do not properly control write access for certain client actions. This could allow authenticated attackers to manipulate the content of System.FileDocument objects in some cases, regardless whether they have write access to it.

bookstack is vulnerable to Improper Access Control

The Brizy Page Builder plugin <= 2.3.11 for WordPress used an incorrect authorization check that allowed any logged-in user accessing any endpoint in the wp-admin directory to modify the content of any existing post or page created with the Brizy editor. An identical issue was found by another researcher in Brizy <= 1.0.125 and fixed in version 1.0.126, but the vulnerability was reintroduced in version 1.0.127.

A vulnerability was found in Xinhu RockOA up to 2.6.9. Impacted is the function publicsaveAjax of the file /index.php. Performing manipulation results in improper authorization. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.3 before 15.11.10, all versions starting from 16.0 before 16.0.6, all versions starting from 16.1 before 16.1.1, which allows an attacker to merge arbitrary code into protected branches.

An issue has been discovered in GitLab EE affecting all versions starting from 12.8 before 15.11.11, all versions starting from 16.0 before 16.0.7, all versions starting from 16.1 before 16.1.2. An attacker could change the name or path of a public top-level group in certain situations.

In Terminalfour before 8.3.16, misconfigured LDAP users are able to login with an invalid password.

An incorrect authorization vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to bypass intended access restrictions via a network. QTS 5.x, QuTS hero are not affected. We have already fixed the vulnerability in the following versions: QuTScloud c5.1.5.2651 and later QTS 4.5.4.2627 build 20231225 and later

DHIS2 Core contains the service layer and Web API for DHIS2, an information system for data capture. Starting in the 2.36 branch and prior to versions 2.37.9.1, 2.38.3.1, and 2.39.1.2, using object model traversal in the payload of a PATCH request, authenticated users with write access to an object may be able to modify related objects that they should not have access to. DHIS2 implementers should upgrade to a supported version of DHIS2 to receive a patch: 2.37.9.1, 2.38.3.1, or 2.39.1.2. It is possible to work around this issue by blocking all PATCH requests on a reverse proxy, but this may cause some issues with the functionality of built-in applications using legacy PATCH requests.

On affected platforms running Arista EOS, an authorized attacker with permissions to perform gNMI requests could craft a request allowing it to update arbitrary configurations in the switch. This situation occurs only when the Streaming Telemetry Agent (referred to as the TerminAttr agent) is enabled and gNMI access is configured on the agent. Note: This gNMI over the Streaming Telemetry Agent scenario is mostly commonly used when streaming to a 3rd party system and is not used by default when streaming to CloudVision

The Bookster WordPress plugin through 1.1.0 allows adding sensitive parameters when validating appointments allowing attackers to manipulate the data sent when booking an appointment (the request body) to change its status from pending to approved.

An authorization issue was discovered in GitLab EE < 12.1.2, < 12.0.4, and < 11.11.6 allowing the merge request approval rules to be overridden without appropriate permissions.

The Gutenberg Template Library & Redux Framework plugin <= 4.2.11 for WordPress used an incorrect authorization check in the REST API endpoints registered under the “redux/v1/templates/” REST Route in “redux-templates/classes/class-api.php”. The `permissions_callback` used in this file only checked for the `edit_posts` capability which is granted to lower-privileged users such as contributors, allowing such users to install arbitrary plugins from the WordPress repository and edit arbitrary posts.

IBM Sterling Connect:Direct Web Services 6.1.0, 6.2.0, and 6.3.0 could allow an authenticated user to spoof the identity of another user due to improper authorization which could allow the user to bypass access restrictions.

Archer Platform 2024.03 before version 2024.09 is affected by an API authorization bypass vulnerability related to supporting application files. A remote unprivileged attacker could potentially exploit this vulnerability to elevate their privileges and upload additional system icons.

authentik is an open-source identity provider. Prior to versions 2024.8.3 and 2024.6.5, access tokens issued to one application can be stolen by that application and used to impersonate the user against any other proxy provider. Also, a user can steal an access token they were legitimately issued for one application and use it to access another application that they aren't allowed to access. Anyone who has more than one proxy provider application with different trust domains or different access control is affected. Versions 2024.8.3 and 2024.6.5 fix the issue.

baltic-it TOPqw Webportal v1.35.283.2 is vulnerable to Incorrect Access Control in the User Management function in /Apps/TOPqw/BenutzerManagement.aspx. This allows a low privileged user to access all modules in the web portal, view and manipulate information and permissions of other users, lock other user or unlock the own account, change the password of other users, create new users or delete existing users and view, manipulate and delete reference data.

IBM Cognos Controller 11.0.0 through 11.0.1 FP3 and IBM Controller 11.1.0 could allow an authenticated user to modify restricted content due to incorrect authorization checks.

Permission bypass when importing or synchronizing entries in User vault in Devolutions Server 2022.3.13 and prior versions allows users with restricted rights to bypass entry permission via id collision.

By exploiting the defVals parameter, attackers could bypass field‑level access checks during record creation in the TYPO3 backend. This gave them the ability to insert arbitrary data into prohibited exclude fields of a database table for which the user already has write permission for a reduced set of fields. This issue affects TYPO3 CMS versions 10.0.0-10.4.54, 11.0.0-11.5.48, 12.0.0-12.4.40, 13.0.0-13.4.22 and 14.0.0-14.0.1.

This vulnerability allows a normal (non-admin) user to disable the Forcepoint One Endpoint (versions 19.04 through 19.08) and bypass DLP and Web protection.

Permission bypass when importing or synchronizing entries in User vault in Devolutions Remote Desktop Manager 2023.1.9 and prior versions allows users with restricted rights to bypass entry permission via id collision.

Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Incorrect Authorization vulnerability. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized access to elevated privileges that increase integrity impact to high. Exploitation of this issue does not require user interaction.

AMP Application Deployment Service in CubeCoders AMP 2.1.x before 2.1.1.2 allows a remote, authenticated user to open ports in the local system firewall by crafting an HTTP(S) request directly to the applicable API endpoint (despite not having permission to make changes to the system's network configuration).

An issue was discovered in the AbuseFilter extension for MediaWiki through 1.35.2. A MediaWiki user who is partially blocked or was unsuccessfully blocked could bypass AbuseFilter and have their edits completed.

Adobe Experience Manager versions 6.5.23.0 and earlier are affected by an Incorrect Authorization vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access.

Canlineapp Online 1.1 is vulnerable to Broken Access Control and allows users with the Auditor role to create an audit template as a result of improper authorization checks. This feature is designated for supervisor role, but auditors have been able to successfully create audit templates from their account.

Cloudera CDH before 5.6.1 allows authorization bypass via direct internal API calls.

a12n-server is an npm package which aims to provide a simple authentication system. A new HAL-Form was added to allow editing users in version 0.18.0. This feature should only have been accessible to admins. Unfortunately, privileges were incorrectly checked allowing any logged in user to make this change. Patched in v0.18.2.

GitProxy is an application that stands between developers and a Git remote endpoint (e.g., github.com). Versions 1.19.1 and below allow users to push to remote repositories while bypassing policies and explicit approvals. Since checks and plugins are skipped, code containing secrets or unwanted changes could be pushed into a repository. This is fixed in version 1.19.2.

Magento versions 2.4.2 (and earlier), 2.4.1-p1 (and earlier) and 2.3.6-p1 (and earlier) are vulnerable to an Improper Authorization vulnerability in the customers module. Successful exploitation could allow a low-privileged user to modify customer data. Access to the admin console is required for successful exploitation.

Account Hijacking in /northstar/Admin/changePassword.jsp in Northstar Technologies Inc NorthStar Club Management 6.3 allows remote authenticated users to change the password of any targeted user accounts via lack of proper authorization in the user-controlled "userID" parameter of the HTTP POST request.