An improper input validation in FortiAI v1.4.0 and earlier may allow an authenticated user to gain system shell access via a malicious payload in the "diagnose" command.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function RP_setBasic of the file /goform/RP_setBasic. The manipulation of the argument bssid leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OS command injection vulnerability in FURUNO SYSTEMS wireless LAN access point devices allows an authenticated user to execute an arbitrary OS command that is not intended to be executed from the web interface by sending a specially crafted request. Affected products and versions are as follows: ACERA 1320 firmware ver.01.26 and earlier, ACERA 1310 firmware ver.01.26 and earlier, ACERA 1210 firmware ver.02.36 and earlier, ACERA 1150i firmware ver.01.35 and earlier, ACERA 1150w firmware ver.01.35 and earlier, ACERA 1110 firmware ver.01.76 and earlier, ACERA 1020 firmware ver.01.86 and earlier, ACERA 1010 firmware ver.01.86 and earlier, ACERA 950 firmware ver.01.60 and earlier, ACERA 850F firmware ver.01.60 and earlier, ACERA 900 firmware ver.02.54 and earlier, ACERA 850M firmware ver.02.06 and earlier, ACERA 810 firmware ver.03.74 and earlier, and ACERA 800ST firmware ver.07.35 and earlier. They are affected when running in ST(Standalone) mode.

ASUS RT-AC86U Traffic Analyzer - Apps analysis function has insufficient filtering of special character. A remote attacker with regular user privilege can exploit this vulnerability to perform command injection attack to execute arbitrary commands, disrupt system or terminate services.

A vulnerability has been discovered in BigTree CMS 4.4.10 and earlier which allows an authenticated attacker to execute arbitrary commands through a crafted request sent to the server via the 'Create a New Setting' function.

**UNSUPPORTED WHEN ASSIGNED** A post-authentication command injection vulnerability in the management commands of the legacy DSL CPE Zyxel VMG4325-B10A firmware version 1.00(AAFR.4)C0_20170615 could allow an authenticated attacker to execute operating system (OS) commands on an affected device via Telnet.

The WordPress PDF Light Viewer Plugin WordPress plugin before 1.4.12 allows users with Author roles to execute arbitrary OS command on the server via OS Command Injection when invoking Ghostscript.

ASUS RT-AC86U Traffic Analyzer - Statistic function has insufficient filtering of special character. A remote attacker with regular user privilege can exploit this vulnerability to perform command injection attack to execute arbitrary commands, disrupt system or terminate services.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

Nagios XI versions prior to 2024R1.2 contain a command injection vulnerability in the Docker Wizard. Insufficient validation of user-supplied input in the wizard allows an authenticated administrator to inject shell metacharacters that are incorporated into backend command invocations. Successful exploitation enables arbitrary command execution with the privileges of the Nagios XI web application user.

Maxum Rumpus 8.2.13 and 8.2.14 is affected by a command injection vulnerability. The web administration contains functionality in which administrators are able to manage users. The edit users form contains a parameter vulnerable to command injection due to insufficient validation.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Univera Computer System Panorama allows Command Injection.This issue affects Panorama: before 8.0.

rejetto HFS (aka HTTP File Server) 3 before 0.52.10 on Linux, UNIX, and macOS allows OS command execution by remote authenticated users (if they have Upload permissions). This occurs because a shell is used to execute df (i.e., with execSync instead of spawnSync in child_process in Node.js).

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

OS command injection vulnerability in ELECOM wireless LAN access point devices allows an authenticated user to execute an arbitrary OS command by sending a specially crafted request.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.420.7, the Git Repository field during project creation is vulnerable to command injection. User input is not properly sanitized, allowing attackers to inject arbitrary shell commands that execute on the underlying server during the deployment workflow. A regular member user can exploit this vulnerability. Version 4.0.0-beta.420.7 contains a patch for the issue.

jc21 NGINX Proxy Manager before 2.11.3 allows backend/internal/certificate.js OS command injection by an authenticated user (with certificate management privileges) via untrusted input to the DNS provider configuration. NOTE: this is not part of any NGINX software shipped by F5.

Webmin CGI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Webmin. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of CGI requests. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22346.

httpd on TP-Link TL-WPA4220 devices (versions 2 through 4) allows remote authenticated users to execute arbitrary OS commands by sending crafted POST requests to the endpoint /admin/powerline. Fixed version: TL-WPA4220(EU)_V4_201023

An OS command injection vulnerability has been reported to affect QuMagie. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QuMagie 2.1.3 and later

Jenkins Selection tasks Plugin 1.0 and earlier executes a user-specified program on the Jenkins controller, allowing attackers with Job/Configure permission to execute an arbitrary system command on the Jenkins controller as the OS user that the Jenkins process is running as.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

A command injection vulnerability was discovered on the Zyxel EMG2926 home router with firmware V1.00(AAQT.4)b8. The vulnerability is located in the diagnostic tools, specifically the nslookup function. A malicious user may exploit numerous vectors to execute arbitrary commands on the router, such as the ping_ip parameter to the expert/maintenance/diagnostic/nslookup URI.

An issue was discovered in includes/webconsole.php in RaspAP 2.5. With authenticated access, an attacker can use a misconfigured (and virtually unrestricted) web console to attack the underlying OS (Raspberry Pi) running this software, and execute commands on the system (including ones for uploading of files and execution of code).

/graphStatus/displayServiceStatus.php in Centreon 19.10.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the RRDdatabase_path parameter.

In Weintek's cMT3000 HMI Web CGI device, an anonymous attacker can execute arbitrary commands after login to the device.

iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script.

D-Link DIR-823X firmware - 240126 was discovered to contain a remote command execution (RCE) vulnerability via the dhcpd_startip parameter at /goform/set_lan_settings.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

An OS Command Injection vulnerability in PAN-OS management server allows authenticated users to inject and execute arbitrary shell commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

A vulnerability has been found in Tenda W30E 1.0.1.25(633) and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-260914 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Apache Kylin 2.3.0, and releases up to 2.6.5 and 3.0.1 has some restful apis which will concatenate os command with the user input string, a user is likely to be able to execute any os command without any protection or validation.

A remote command injection vulnerability exists in the Barracuda Load Balancer product line (confirmed on v5.4.0.004 (2015-11-26) and v6.0.1.006 (2016-08-19); fixed in 6.1.0.003 (2017-01-17)) in which an authenticated user can execute arbitrary shell commands and gain root privileges. The vulnerability stems from unsanitized data being processed in a system call when the delete_assessment command is issued.

Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover.

Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place.

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.

ASUS RT-AC86U Adaptive QoS - Web History function has insufficient filtering of special character. A remote attacker with regular user privilege can exploit this vulnerability to perform command injection attack to execute arbitrary commands, disrupt system or terminate services.

ASUS RT-AC86U unused Traffic Analyzer legacy Statistic function has insufficient filtering of special character. A remote attacker with regular user privilege can exploit this vulnerability to perform command injection attack to execute arbitrary commands, disrupt system or terminate services.

A post-authentication command injection vulnerability in the WSGI server of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an authenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SMTP configuration tests resulting in command execution

An exploitable vulnerability exists in the /api/CONFIG/backup functionality of Circle with Disney. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.