A vulnerability was identified in DrayTek Vigor 300B up to 1.5.1.6. This affects the function cgiGetFile of the file /cgi-bin/mainfunction.cgi/uploadlangs of the component Web Management Interface. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor confirms that "300B is EoL, and this is an authenticated vulnerability. We don't plan to fix it." This vulnerability only affects products that are no longer supported by the maintainer.

Three os command injection vulnerabilities exist in the boa formWsc functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `peerPin` request's parameter.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiAnalyzer version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiManager version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiAnalyzer BigData version 7.4.0, 7.2.0 through 7.2.7, 7.0.1 through 7.0.6, 6.4.5 through 6.4.7 and 6.2.5, Fortinet FortiAnalyzer Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 and Fortinet FortiManager Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 GUI allows an authenticated privileged attacker to execute unauthorized code or commands via crafted HTTPS or HTTP requests.

Tenda G300-F router firmware version 16.01.14.2 and prior contain an OS command injection vulnerability in the WAN diagnostic functionality (formSetWanDiag). The implementation constructs a shell command that invokes curl and incorporates attacker-controlled input into the command line without adequate neutralization. As a result, a remote attacker with access to the affected management interface can inject additional shell syntax and execute arbitrary commands on the device with the privileges of the management process.

Insecure file operations in HPE Aruba Networking Fabric Composer’s backup functionality could allow authenticated attackers to achieve remote code execution. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system.

OS command injection vulnerability exists in WRC-X1500GS-B and WRC-X1500GSA-B. A crafted request from a logged-in user may lead to an arbitrary OS command execution.

A command injection vulnerability may be exploited after the admin's authentication via the import of a crafted VPN client configuration file on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A command injection vulnerability may be exploited after the admin's authentication in the VPN server configuration module on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

AP180 series with firmware versions prior to AP_RGOS 11.9(4)B1P8 contains an OS command injection vulnerability. If this vulnerability is exploited, arbitrary commands may be executed on the devices.

A command injection vulnerability may be exploited after the admin's authentication via the configuration backup restoration function of the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A command injection vulnerability may be exploited after the admin's authentication in the cloud communication interface on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A command injection vulnerability may be exploited after the admin's authentication in the VPN Connection Service on the Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A security vulnerability has been detected in D-Link DIR-823X 250416. This issue affects some unknown processing of the file /goform/set_ddns of the component DDNS Service. The manipulation of the argument ddnsType/ddnsDomainName/ddnsUserName/ddnsPwd leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was found in D-Link DIR-615 4.10. This vulnerability affects unknown code of the file adv_routing.php of the component Web Configuration Interface. Performing a manipulation of the argument dest_ip/ submask/ gw results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

n8n is an open source workflow automation platform. From version 0.187.0 to before 1.120.3, a command injection vulnerability was identified in n8n’s community package installation functionality. The issue allowed authenticated users with administrative permissions to execute arbitrary system commands on the n8n host under specific conditions. This issue has been patched in version 1.120.3.

An OS command injection vulnerability exists in the console factory functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability has been found in D-Link DIR-823X 250416. This affects the function sub_4211C8 of the file /goform/set_filtering. Such manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

meterN 1.2.3 contains an authenticated remote code execution vulnerability in admin_meter2.php and admin_indicator2.php scripts. Attackers can exploit the 'COMMANDx' and 'LIVECOMMANDx' POST parameters to execute arbitrary system commands with administrative privileges.

OS Command Injection in Packagist microweber/microweber prior to 1.2.11.

A vulnerability was found in D-Link DIR-823X 250416. Affected by this issue is some unknown functionality of the file /goform/set_ac_status. Performing a manipulation of the argument ac_ipaddr/ac_ipstatus/ap_randtime results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used.

A weakness has been identified in D-Link DIR-823X 250416. This vulnerability affects the function sub_420688 of the file /goform/set_qos. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

Cypress Solutions CTM-200 2.7.1 contains an authenticated command injection vulnerability in the firmware upgrade script that allows remote attackers to execute shell commands. Attackers can exploit the 'fw_url' parameter in the ctm-config-upgrade.sh script to inject and execute arbitrary commands with root privileges.

A weakness has been identified in D-Link DIR-823X 250416. This impacts an unknown function of the file /goform/set_language. Executing a manipulation of the argument langSelection can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker could exploit this vulnerability by uploading a crafted file to the web UI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands with root privileges on the device.

A security flaw has been discovered in D-Link DIR-823X 250416. The affected element is the function sub_4208A0 of the file /goform/set_dmz of the component Configuration Handler. The manipulation of the argument dmz_host/dmz_enable results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A security vulnerability has been detected in D-Link DIR-823X 250416. This affects the function sub_4175CC of the file /goform/set_static_route_table. Such manipulation of the argument interface/destip/netmask/gateway/metric leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

A security flaw has been discovered in D-Link DIR-823X 250416. This vulnerability affects unknown code of the file /goform/set_ac_server of the component Web Management Interface. The manipulation of the argument ac_server results in os command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in D-Link DIR-823X 250416. The impacted element is an unknown function of the file /goform/set_mac_clone. Such manipulation of the argument mac leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A weakness has been identified in D-Link DIR-823X 250416. This vulnerability affects the function sub_420618 of the file /goform/set_upnp. This manipulation of the argument upnp_enable causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks.

A vulnerability was determined in UTT 进取 521G 3.1.1-190816. The impacted element is the function sub_446B18 of the file /goform/formPdbUpConfig. Executing a manipulation of the argument policyNames can lead to os command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in D-Link DIR-823X 250416. This affects an unknown function of the file /goform/set_server_settings of the component Configuration Parameter Handler. The manipulation of the argument terminal_addr/server_ip/server_port leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability was found in D-Link DIR-615 4.10. This issue affects some unknown processing of the file /set_temp_nodes.php of the component URL Filter. The manipulation results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in D-Link DIR-615 4.10. Impacted is an unknown function of the file /adv_mac_filter.php of the component MAC Filter Configuration. This manipulation of the argument mac causes os command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A post-authentication command injection vulnerability in the TR-369 certificate download CGI program of the Zyxel VMG3625-T50B firmware versions through 5.50(ABPM.9.7)C0 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on an affected device.

The ns_backup extension through 13.0.2 for TYPO3 allows command injection.

A privilege escalation vulnerability was discovered in the SSH captive command shell interface that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

The authenticated remote command execution (RCE) vulnerability exists in the Parental Control page on TP-Link Archer C7(EU) V2 and TL-WR841N/ND(MS) V9. This issue affects Archer C7(EU) V2: before 241108 and TL-WR841N/ND(MS) V9: before 241108. Both products have reached the status of EOL (end-of-life). It's recommending to purchase the new product to ensure better performance and security. If replacement is not an option in the short term, please use the second reference link to download and install the patch(es).

A security vulnerability has been detected in D-Link DI-500WF 14.04.10A1T. The impacted element is an unknown function of the file /version_upgrade.asp of the component jhttpd. The manipulation of the argument path leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.

Netwin SurgeFTP version 23c8 and prior contains a vulnerability in its web-based administrative console that allows authenticated users to execute arbitrary system commands via crafted POST requests to `surgeftpmgr.cgi`. This can lead to full remote code execution on the underlying system.

A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.

A vulnerability was determined in Linksys E1700 1.0.0.4.003. This vulnerability affects the function systemCommand of the file /goform/systemCommand. Executing manipulation of the argument command can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Three os command injection vulnerabilities exist in the boa formWsc functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `targetAPSsid` request's parameter.

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.40, USG FLEX series firmware versions from V4.50 through V5.40, USG FLEX 50(W) series firmware versions from V4.16 through V5.40, and USG20(W)-VPN series firmware versions from V4.16 through V5.40 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on the affected device by passing a crafted string as an argument to a CLI command.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A command injection vulnerability may be exploited after the admin's authentication on the web portal on Omada gateways.

A vulnerability in the software upgrade process of Cisco TelePresence Collaboration Endpoint Software and Cisco RoomOS Software could allow an authenticated, remote attacker to modify the filesystem to cause a denial of service (DoS) or gain privileged access to the root filesystem. The vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by sending requests with malformed parameters to the system using the console, Secure Shell (SSH), or web API. A successful exploit could allow the attacker to modify the device configuration or cause a DoS.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.