WRC-BE36QS-B and WRC-W701-B contain an improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in WebGUI. If exploited, an arbitrary OS command may be executed by a remote attacker who can log in to WebGUI.

OS command injection vulnerability in WRC-F1167ACF all versions, and WRC-1750GHBK all versions allows an attacker who can access the product to execute an arbitrary OS command by sending a specially crafted request.

OS command injection vulnerability in ELECOM wireless LAN routers allows an attacker who can access the product to execute an arbitrary OS command by sending a specially crafted request. Affected products and versions are as follows: WRC-F1167ACF all versions, WRC-1750GHBK all versions, WRC-1167GHBK2 all versions, WRC-1750GHBK2-I all versions, and WRC-1750GHBK-E all versions.

OS command injection vulnerability in ELECOM wireless LAN routers allows an authenticated user to execute an arbitrary OS command by sending a specially crafted request. Affected products and versions are as follows: WRC-600GHBK-A all versions, WRC-1467GHBK-A all versions, WRC-1900GHBK-A all versions, WRC-733FEBK2-A all versions, WRC-F1167ACF2 all versions, WRC-1467GHBK-S all versions, and WRC-1900GHBK-S all versions.

OS command injection vulnerability exists in ELECOM wireless LAN routers. A specially crafted request may be sent to the affected product by a logged-in user with an administrative privilege to execute an arbitrary OS command.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent authenticated attacker to execute an arbitrary OS command with a root privilege by sending a specially crafted request. Affected products and versions are as follows: WRC-1167GHBK-S v1.03 and earlier, WRC-1167GEBK-S v1.03 and earlier, WRC-1167FEBK-S v1.04 and earlier, WRC-1167GHBK3-A v1.24 and earlier, and WRC-1167FEBK-A v1.18 and earlier.

OS command injection vulnerability in WRC-X5400GS-B v1.0.10 and earlier, and WRC-X5400GSA-B v1.0.10 and earlier allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

OS command injection vulnerability in ELECOM wireless LAN access point devices allows an authenticated user to execute an arbitrary OS command by sending a specially crafted request.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with credentials to execute arbitrary OS commands by sending a specially crafted request to the product.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent unauthenticated attacker to execute arbitrary OS commands by sending a specially crafted request to the product. Affected products and versions are as follows: WRC-X3200GST3-B v1.25 and earlier, WRC-G01-W v1.24 and earlier, and WMC-X1800GST-B v1.41 and earlier. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

OS command injection vulnerability in WRC-X3000GSN v1.0.2, WRC-X3000GS v1.0.24 and earlier, and WRC-X3000GSA v1.0.24 and earlier allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command by sending a specially crafted request to the product.

OS command injection vulnerability in WRC-X3000GS2-W v1.05 and earlier, WRC-X3000GS2-B v1.05 and earlier, and WRC-X3000GS2A-B v1.05 and earlier allows a network-adjacent authenticated user to execute an arbitrary OS command by sending a specially crafted request.

WRH-733GBK and WRH-733GWH contain an improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in miniigd SOAP service. If a remote unauthenticated attacker sends a specially crafted request to the affected product, an arbitrary OS command may be executed.

WRH-733GBK and WRH-733GWH contain an improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in the telnet function. If a remote unauthenticated attacker sends a specially crafted request to the affected product, an arbitrary OS command may be executed.

WRC-X3000GS, WRC-X3000GSA, and WRC-X3000GSN contain an improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in Connection Diagnostics page. If a remote authenticated attacker sends a specially crafted request to the affected product, an arbitrary OS command may be executed.

WRC-300FEBK, WRC-F300NF, WRC-733FEBK, WRH-300RD, WRH-300BK, WRH-300SV, WRH-300WH, WRH-H300WH, WRH-H300BK, WRH-300BK-S, and WRH-300WH-S all versions allows an unauthenticated network-adjacent attacker to execute an arbitrary OS command via unspecified vectors.

ELECOM LAN routers (WRH-733GBK firmware v1.02.9 and prior and WRH-733GWH firmware v1.02.9 and prior) allows a network-adjacent attacker with an administrator privilege to execute arbitrary OS commands via unspecified vectors.

OS command injection vulnerability in ELECOM routers (WRC-1167GST2 firmware v1.25 and prior, WRC-1167GST2A firmware v1.25 and prior, WRC-1167GST2H firmware v1.25 and prior, WRC-2533GS2-B firmware v1.52 and prior, WRC-2533GS2-W firmware v1.52 and prior, WRC-1750GS firmware v1.03 and prior, WRC-1750GSV firmware v2.11 and prior, WRC-1900GST firmware v1.03 and prior, WRC-2533GST firmware v1.03 and prior, WRC-2533GSTA firmware v1.03 and prior, WRC-2533GST2 firmware v1.25 and prior, WRC-2533GST2SP firmware v1.25 and prior, WRC-2533GST2-G firmware v1.25 and prior, and EDWRC-2533GST2 firmware v1.25 and prior) allows a network-adjacent authenticated attackers to execute an arbitrary OS command with the root privilege via unspecified vectors.

ELECOM LAN routers (WRH-733GBK firmware v1.02.9 and prior and WRH-733GWH firmware v1.02.9 and prior) allows a network-adjacent attacker with an administrator privilege to execute arbitrary OS commands via unspecified vectors.

ELECOM LAN routers (WRC-1167GST2 firmware v1.25 and prior, WRC-1167GST2A firmware v1.25 and prior, WRC-1167GST2H firmware v1.25 and prior, WRC-2533GS2-B firmware v1.52 and prior, WRC-2533GS2-W firmware v1.52 and prior, WRC-1750GS firmware v1.03 and prior, WRC-1750GSV firmware v2.11 and prior, WRC-1900GST firmware v1.03 and prior, WRC-2533GST firmware v1.03 and prior, WRC-2533GSTA firmware v1.03 and prior, WRC-2533GST2 firmware v1.25 and prior, WRC-2533GST2SP firmware v1.25 and prior, WRC-2533GST2-G firmware v1.25 and prior, and EDWRC-2533GST2 firmware v1.25 and prior) allows a network-adjacent authenticated attacker to execute an arbitrary OS command via unspecified vectors.

ELECOM WRC-300FEBK-S allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.

Tenda G300-F router firmware version 16.01.14.2 and prior contain an OS command injection vulnerability in the WAN diagnostic functionality (formSetWanDiag). The implementation constructs a shell command that invokes curl and incorporates attacker-controlled input into the command line without adequate neutralization. As a result, a remote attacker with access to the affected management interface can inject additional shell syntax and execute arbitrary commands on the device with the privileges of the management process.

Pydio 4.2.1 through 8.2.1 has an authenticated remote code execution vulnerability in which an attacker with administrator access to the web application can execute arbitrary code on the underlying system via Command Injection.

AP180 series with firmware versions prior to AP_RGOS 11.9(4)B1P8 contains an OS command injection vulnerability. If this vulnerability is exploited, arbitrary commands may be executed on the devices.

System Command Injection in network.set_auth_settings in Buffalo TS5600D1206 version 3.70-0.10 allows attackers to execute system commands via the adminUsername and adminPassword parameters.

System command injection in ajaxdata.php in TerraMaster TOS version 3.1.03 allows attackers to execute system commands during group creation via the "groupname" parameter.

System command injection in User.create method in Buffalo TS5600D1206 version 3.61-0.10 allows attackers to execute system commands via the "name" parameter.

Dell EMC Unity Operating Environment (OE) versions prior to 4.3.0.1522077968 are affected by multiple OS command injection vulnerabilities. A remote application admin user could potentially exploit the vulnerabilities to execute arbitrary OS commands as system root on the system where Dell EMC Unity is installed.

An OS command injection vulnerability in the web administration component of Micro Focus Secure Messaging Gateway (SMG) allows a remote attacker authenticated as a privileged user to execute arbitrary OS commands on the SMG server. This can be exploited in conjunction with CVE-2018-12464 to achieve unauthenticated remote code execution. Affects Micro Focus Secure Messaging Gateway versions prior to 471. It does not affect previous versions of the product that used GWAVA product name (i.e. GWAVA 6.5).

The Symantec Reporter CLI 10.1 prior to 10.1.5.6 and 10.2 prior to 10.2.1.8 is susceptible to an OS command injection vulnerability. An authenticated malicious administrator with Enable mode access can execute arbitrary OS commands with elevated system privileges.

In PostgreSQL 9.3 through 11.2, the "COPY TO/FROM PROGRAM" function allows superusers and users in the 'pg_execute_server_program' group to execute arbitrary code in the context of the database's operating system user. This functionality is enabled by default and can be abused to run arbitrary operating system commands on Windows, Linux, and macOS. NOTE: Third parties claim/state this is not an issue because PostgreSQL functionality for ‘COPY TO/FROM PROGRAM’ is acting as intended. References state that in PostgreSQL, a superuser can execute commands as the server user without using the ‘COPY FROM PROGRAM’.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 42 of 46).

D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen.

NetGain Enterprise Manager (EM) is affected by OS Command Injection vulnerabilities in versions before 10.0.57. These vulnerabilities could allow remote authenticated attackers to inject arbitrary code, resulting in remote code execution.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4.1, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 and BIG-IQ 7.0.0-7.1.0.2, 6.0.0-6.1.0, and 5.1.0-5.4.0, an undisclosed iControl REST worker is vulnerable to command injection by an admin/resource admin user. This issue impacts both iControl REST and tmsh implementations.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via import.cgi encKey parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via tools_firmware.cgi date parameter, time parameter, and offset parameter.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via formSysCmd parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via export.cgi encKey parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter of a certain URL, different URL from CVE-2018-0634.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter or bootmode parameter of a certain URL.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd parameter.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. An attacker would need to have valid administrator credentials on the device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker with elevated privileges could exploit this vulnerability by sending crafted commands to the administrative web management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.