NVIDIA Bluefield 2 and Bluefield 3 DPU BMC contains a vulnerability in ipmitool, where a root user may cause code injection by a network call. A successful exploit of this vulnerability may lead to code execution on the OS.

OS command injection vulnerability exists in Wi-Fi AP UNIT allows. If this vulnerability is exploited, a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command. Affected products and versions are as follows: AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPUM-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B07 and earlier

Budibase is a low code platform for creating internal tools, workflows, and admin panels. In 3.23.22 and earlier, the PostgreSQL integration constructs shell commands using user-controlled configuration values (database name, host, password, etc.) without proper sanitization. The password and other connection parameters are directly interpolated into a shell command. This affects packages/server/src/integrations/postgres.ts.

A vulnerability was found in a Moodle TeX filter administrative setting where insufficient sanitization of configuration input could allow command injection. On sites where the TeX filter is enabled and ImageMagick is installed, a maliciously crafted setting value entered by an administrator could result in unintended system command execution. While exploitation requires administrative privileges, successful compromise could affect the entire Moodle server.

An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Tenda G300-F router firmware version 16.01.14.2 and prior contain an OS command injection vulnerability in the WAN diagnostic functionality (formSetWanDiag). The implementation constructs a shell command that invokes curl and incorporates attacker-controlled input into the command line without adequate neutralization. As a result, a remote attacker with access to the affected management interface can inject additional shell syntax and execute arbitrary commands on the device with the privileges of the management process.

An improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox Cloud 5.0.4 may allow a privileged attacker with super-admin profile and CLI access to execute unauthorized code or commands via crafted HTTP requests.

Cacti is an open source performance and fault management framework. Due to a flaw in multi-line SNMP result parser, authenticated users can inject malformed OIDs in the response. When processed by ss_net_snmp_disk_io() or ss_net_snmp_disk_bytes(), a part of each OID will be used as a key in an array that is used as part of a system command, causing a command execution vulnerability. This vulnerability is fixed in 1.2.29.

The Telus Wi-Fi Hub (PRV65B444A-S-TS) with firmware version 3.00.20 is affected by an authenticated command injection vulnerability in multiple parameters passed to tr69_cmd.cgi. A remote attacker connected to the router's LAN and authenticated with a super user account, or using a bypass authentication vulnerability like CVE-2021-20090 could leverage this issue to run commands or gain a shell as root on the target device.

A vulnerability in the configuration dashboard of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to execute arbitrary code. This vulnerability is due to insufficient sanitization of configuration entries. An attacker could exploit this vulnerability by logging in as a super admin and entering crafted input to configuration options on the CSPC configuration dashboard. A successful exploit could allow the attacker to execute remote code as root.

The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.16.10 via the compression_level setting. This is due to the plugin using the compression_level setting in proc_open() without any validation. This makes it possible for authenticated attackers, with administrator-level access and above, to execute code on the server.

Blinko is an AI-powered card note-taking project. Prior to version 1.8.4, the MCP (Model Context Protocol) server creation function allows specifying arbitrary commands and arguments, which are executed when testing the connection. This issue has been patched in version 1.8.4.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in Cisco IOx application hosting environment of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands into the underlying operating system as the root user. This vulnerability is due to incomplete validation of fields in the application packages loaded onto IOx. An attacker could exploit this vulnerability by creating a crafted application .tar file and loading it onto the device. A successful exploit could allow the attacker to perform command injection into the underlying operating system as the root user.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability in the command line interface of AOS-CX Switches could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

NVIDIA DGX-1 BMC contains a vulnerability in the SPX REST API, where an attacker with the appropriate level of authorization can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, and data tampering.

Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution as root.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into requests sent to the firmware update route.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340/D440 provided by Y'S corporation. A user with an administrative privilege who logged in to the web management page of the affected product may execute an arbitrary OS command.

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.10, LTS2024 release versions 7.13.1.0 through 7.13.1.40, contain an OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution.

Improper input handling in a modem-management administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

A flaw has been found in TRENDnet TEW-811DRU 1.0.2.0. This affects the function setDeviceURL  of the file uapply.cgi of the component httpd . This manipulation of the argument DeviceURL causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SoftAP configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Improper input handling in a wireless-control administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

This affects the package json before 10.0.0. It is possible to inject arbritary commands using the parseLookup function.

Pi-hole Web v4.3.2 (aka AdminLTE) allows Remote Code Execution by privileged dashboard users via a crafted DHCP static lease.

On Barracuda CloudGen WAN Private Edge Gateway devices before 8 webui-sdwan-1089-8.3.1-174141891, an OS command injection vulnerability exists in /ajax/update_certificate - a crafted HTTP request allows an authenticated attacker to execute arbitrary commands. For example, a name field can contain :password and a password field can contain shell metacharacters.

Ruckus ZoneFlex R500 104.0.0.0.1347 devices allow an authenticated attacker to execute arbitrary OS commands via the hidden /forms/nslookupHandler form, as demonstrated by the nslookuptarget=|cat${IFS} substring.

Two OS command injection vulnerabilities exist in the zebra vlan_name functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the code branch that manages an already existing vlan configuration.

Two OS command injection vulnerabilities exist in the zebra vlan_name functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the code branch that manages a new vlan configuration.

A vulnerability was found in Chengdu VEC40G 3.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /send_order.cgi?parameter=access_detect of the component Network Detection. The manipulation of the argument COUNT with the input 3 | netstat -an leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-228013 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Zen Cart 1.5.7b allows admins to execute arbitrary OS commands by inspecting an HTML radio input element (within the modules edit page) and inserting a command.

Perle IOLAN STS/SCS terminal server models with firmware versions prior to 6.0 allow authenticated OS command injection via the restricted shell accessed over Telnet or SSH. The shell 'ps' command does not perform proper argument sanitization and passes user-supplied parameters into an 'sh -c' invocation running as root. An authenticated attacker who can log in to the device can inject shell metacharacters after the 'ps' subcommand to execute arbitrary OS commands with root privileges, leading to full compromise of the underlying operating system.

functions_netflow.php in Artica Pandora FMS 7.0 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the index.php?operation/netflow/nf_live_view ip_dst, dst_port, or src_port parameter, a different vulnerability than CVE-2019-20224.

HGiga MailSherlock query function for connection log has a vulnerability of insufficient filtering for user input. An authenticated remote attacker with administrator privilege can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operation or disrupt service.

AP180 series with firmware versions prior to AP_RGOS 11.9(4)B1P8 contains an OS command injection vulnerability. If this vulnerability is exploited, arbitrary commands may be executed on the devices.

ActiveX Control(HShell.dll) in Handy Groupware 1.7.3.1 for Windows 7, 8, and 10 allows an attacker to execute arbitrary command via the ShellExec method.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

D-Link DCH-M225 1.05b01 and earlier devices allow remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the media renderer name.

D-Link DSL-GS225 J1 AU_1.0.4 devices allow an admin to execute OS commands by placing shell metacharacters after a supported CLI command, as demonstrated by ping -c1 127.0.0.1; cat/etc/passwd. The CLI is reachable by TELNET.