In the Linux kernel, the following vulnerability has been resolved: drm: bridge: it66121: Fix invalid connector dereference Fix the NULL pointer dereference when no monitor is connected, and the sound card is opened from userspace. Instead return an empty buffer (of zeroes) as the EDID information to the sound framework if there is no connector attached.
In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro In the TDX_HYPERCALL asm, after the TDCALL instruction returns from the untrusted VMM, the registers that the TDX guest shares to the VMM need to be cleared to avoid speculative execution of VMM-provided values. RSI is specified in the bitmap of those registers, but it is missing when zeroing out those registers in the current TDX_HYPERCALL. It was there when it was originally added in commit 752d13305c78 ("x86/tdx: Expand __tdx_hypercall() to handle more arguments"), but was later removed in commit 1e70c680375a ("x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()"), which was correct because %rsi is later restored in the "pop %rsi". However a later commit 7a3a401874be ("x86/tdx: Drop flags from __tdx_hypercall()") removed that "pop %rsi" but forgot to add the "xor %rsi, %rsi" back. Fix by adding it back.
In the Linux kernel, the following vulnerability has been resolved: libceph: just wait for more data to be available on the socket A short read may occur while reading the message footer from the socket. Later, when the socket is ready for another read, the messenger invokes all read_partial_*() handlers, including read_partial_sparse_msg_data(). The expectation is that read_partial_sparse_msg_data() would bail, allowing the messenger to invoke read_partial() for the footer and pick up where it left off. However read_partial_sparse_msg_data() violates that and ends up calling into the state machine in the OSD client. The sparse-read state machine assumes that it's a new op and interprets some piece of the footer as the sparse-read header and returns bogus extents/data length, etc. To determine whether read_partial_sparse_msg_data() should bail, let's reuse cursor->total_resid. Because once it reaches to zero that means all the extents and data have been successfully received in last read, else it could break out when partially reading any of the extents and data. And then osd_sparse_read() could continue where it left off. [ idryomov: changelog ]
In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response.
In the Linux kernel, the following vulnerability has been resolved: mfd: qcom-spmi-pmic: Fix revid implementation The Qualcomm SPMI PMIC revid implementation is broken in multiple ways. First, it assumes that just because the sibling base device has been registered that means that it is also bound to a driver, which may not be the case (e.g. due to probe deferral or asynchronous probe). This could trigger a NULL-pointer dereference when attempting to access the driver data of the unbound device. Second, it accesses driver data of a sibling device directly and without any locking, which means that the driver data may be freed while it is being accessed (e.g. on driver unbind). Third, it leaks a struct device reference to the sibling device which is looked up using the spmi_device_from_of() every time a function (child) device is calling the revid function (e.g. on probe). Fix this mess by reimplementing the revid lookup so that it is done only at probe of the PMIC device; the base device fetches the revid info from the hardware, while any secondary SPMI device fetches the information from the base device and caches it so that it can be accessed safely from its children. If the base device has not been probed yet then probe of a secondary device is deferred.
An issue was discovered in drivers/usb/gadget/function/rndis.c in the Linux kernel before 5.16.10. The RNDIS USB gadget lacks validation of the size of the RNDIS_MSG_SET command. Attackers can obtain sensitive information from kernel memory.
The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.
IBM UrbanCode Deploy (UCD) 7.0.3.0, 7.0.4.0, 7.0.5.3, 7.0.5.4, 7.1.0.0, 7.1.1.0, 7.1.1.1, and 7.1.1.2, stores keystore passwords in plain text after a manual edit, which can be read by a local user. IBM X-Force ID: 191944.
IBM Robotic Process Automation 21.0.2 could allow a local user to obtain sensitive web service configuration credentials from system memory. IBM X-Force ID: 223026.
IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 stores highly sensitive information in cleartext that could be obtained by a user. IBM X-Force ID: 179004.
IBM Planning Analytics 2.0 allows web pages to be stored locally which can be read by another user on the system. IBM X-Force ID: 190834.
IBM PowerHA 7.2 could allow a local attacker to obtain sensitive information from temporary directories after a discovery failure occurs. IBM X-Force ID: 189969.
In the Linux kernel, the following vulnerability has been resolved: x86: fix user address masking non-canonical speculation issue It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations.
In the Linux kernel, the following vulnerability has been resolved: xfrm: fix one more kernel-infoleak in algo dumping During fuzz testing, the following issue was discovered: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30 _copy_to_iter+0x598/0x2a30 __skb_datagram_iter+0x168/0x1060 skb_copy_datagram_iter+0x5b/0x220 netlink_recvmsg+0x362/0x1700 sock_recvmsg+0x2dc/0x390 __sys_recvfrom+0x381/0x6d0 __x64_sys_recvfrom+0x130/0x200 x64_sys_call+0x32c8/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was stored to memory at: copy_to_user_state_extra+0xcc1/0x1e00 dump_one_state+0x28c/0x5f0 xfrm_state_walk+0x548/0x11e0 xfrm_dump_sa+0x1e0/0x840 netlink_dump+0x943/0x1c40 __netlink_dump_start+0x746/0xdb0 xfrm_user_rcv_msg+0x429/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was created at: __kmalloc+0x571/0xd30 attach_auth+0x106/0x3e0 xfrm_add_sa+0x2aa0/0x4230 xfrm_user_rcv_msg+0x832/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Bytes 328-379 of 732 are uninitialized Memory access of size 732 starts at ffff88800e18e000 Data copied to user address 00007ff30f48aff0 CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Fixes copying of xfrm algorithms where some random data of the structure fields can end up in userspace. Padding in structures may be filled with random (possibly sensitve) data and should never be given directly to user-space. A similar issue was resolved in the commit 8222d5910dae ("xfrm: Zero padding when dumping algos and encap") Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Just leak decrypted memory on unrecoverable errors In CoCo VMs it is possible for the untrusted host to cause set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. Leak the decrypted memory when set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call WARN_ONCE().
IBM Concert 1.0.0 through 2.1.0 could allow a remote attacker to obtain sensitive information from allocated memory due to improper clearing of heap memory.
IBM Concert Software 1.0.0 through 1.1.0 could allow a remote attacker to obtain sensitive information from allocated memory due to improper clearing of heap memory.
IBM Concert 1.0.0 through 2.1.0 could allow a remote attacker to obtain sensitive information from allocated memory due to improper clearing of heap memory.
IBM Storage Virtualize 8.4, 8.5, 8.7, and 9.1 IKEv1 implementation allows remote attackers to obtain sensitive information from device memory via a Security Association (SA) negotiation request.
IBM Concert 1.0.0 through 2.1.0 could allow an attacker to obtain sensitive information using man in the middle techniques due to improper clearing of heap memory.
IBM Concert 1.0.0 through 2.1.0 could allow a remote attacker to obtain sensitive information from allocated memory due to improper clearing of heap memory.