A remote code execution issue exists in HPE OneView.

There are vulnerabilities in the Soft AP Daemon Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.

Potential security vulnerabilities have been identified with HPE Nimble Storage systems in multi array group configurations. The vulnerabilities could be exploited by an attacker to gain elevated privileges on the array. The following NimbleOS versions, and all subsequent releases, contain a software fix for this vulnerability: 3.9.2.0, 4.5.5.0, 5.0.8.0 and 5.1.3.0.

The vulnerability could be remotely exploited to bypass authentication.

HPE Cray Parallel Application Launch Service (PALS) is subject to an authentication bypass.

Pre-auth memory corruption in HPE Serviceguard

A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S Network switches. The vulnerability could be remotely exploited to allow authentication bypass. HPE has made the following software updates to resolve the vulnerability in Hewlett Packard Enterprise OfficeConnect 1820, 1850 and 1920S Network switches versions: Prior to PT.02.14; Prior to PC.01.22; Prior to PO.01.21; Prior to PD.02.22;

There is a command injection vulnerability that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Unauthenticated Java deserialization vulnerability in Serviceguard Manager

A potential security vulnerability in HPE Ezmeral Data Fabric that may allow a remote access restriction bypass in the TEZ MapR ecosystem component was discovered in version(s): Prior to Tez-0.8: mapr-tez-0.8.201907081100-1.noarch; prior to Tez-0.9: mapr-tez-0.9.201907090334-1.noarch; prior to Tez-0.9.2: mapr-tez-0.9.2.0.201907081043-1.noarch. HPE has provided software updates to resolve the vulnerability in the TEZ MapR ecosystem component in HPE Ezmeral Data Fabric.

A potential security vulnerability has been identified in HPE 3PAR StoreServ, HPE Primera Storage and HPE Alletra 9000 Storage array firmware. An unauthenticated user could remotely exploit the low complexity issue to execute code as administrator. This vulnerability impacts completely the confidentiality, integrity, availability of the array. HPE has made the following software updates and mitigation information to resolve the vulnerability in 3PAR, Primera and Alletra 9000 firmware.

Unauthenticated RCE in HPE Insight Cluster Management Utility

A remote session reuse vulnerability leading to access restriction bypass was discovered in HPE MSA 2040 SAN Storage; HPE MSA 1040 SAN Storage; HPE MSA 1050 SAN Storage; HPE MSA 2042 SAN Storage; HPE MSA 2050 SAN Storage; HPE MSA 2052 SAN Storage version(s): GL225P001 and earlier; GL225P001 and earlier; VE270R001-01 and earlier; GL225P001 and earlier; VL270R001-01 and earlier; VL270R001-01 and earlier.

Unauthenticated server side request forgery in HPE Serviceguard Manager

A command injection security vulnerability has been identified in HPE Nimble Storage Hybrid Flash Arrays, HPE Nimble Storage All Flash Arrays and HPE Nimble Storage Secondary Flash Arrays that could allow an attacker to execute arbitrary commands on a Nimble appliance. HPE has made the following software updates to resolve the vulnerability in HPE Nimble Storage: 5.0.10.100 or later, 5.2.1.0 or later, 6.0.0.100 or later.

Security vulnerabilities in HPE IceWall SSO 10.0 certd could be exploited remotely to allow SQL injection or unauthorized data injection. HPE has provided the following updated modules to resolve these vulnerabilities. HPE IceWall SSO version 10.0 certd library Patch 9 for RHEL and HPE IceWall SSO version 10.0 certd library Patch 9 for HP-UX.

A memory corruption vulnerability in ArubaOS-Switch could lead to unauthenticated remote code execution by receiving specially crafted packets. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A remote authentication bypass vulnerability was discovered in HPE Cray Legacy Shasta System Solutions; HPE Slingshot; and HPE Cray EX supercomputers versions: Prior to node controller firmware associated with HPE Cray EX liquid cooled blades, and all versions of chassis controller firmware associated with HPE Cray EX liquid cooled cabinets prior to 1.6.27/1.5.33/1.4.27; All Slingshot versions prior to 1.7.2; All versions of node controller firmware associated with HPE Cray EX liquid cooled blades, and all versions of chassis controller firmware associated with HPE Cray EX liquid cooled cabinets prior to 1.6.27/1.5.33/1.4.27. HPE has provided a software update to resolve this vulnerability in HPE Cray Legacy Shasta System Solutions, HPE Slingshot, and HPE Cray EX Supercomputers.

A potential security vulnerability has been identified in HPE Integrated Lights-Out 5 (iLO 5) and Integrated Lights-Out 6 (iLO 6). The vulnerability could be remotely exploited to allow authentication bypass.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A server-side request forgery vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

An authentication bypass vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A directory traversal information disclosure vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An unprivileged network attacker could gain system privileges to provisioned Intel manageability SKUs: Intel Active Management Technology (AMT) and Intel Standard Manageability (ISM). An unprivileged local attacker could provision manageability features gaining unprivileged network or local system privileges on Intel manageability SKUs: Intel Active Management Technology (AMT), Intel Standard Manageability (ISM), and Intel Small Business Technology (SBT).

A directory traversal vulnerability in Hewlett Packard Enterprise Insight Remote Support may allow remote code execution.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A java deserialization vulnerability in HPE Remote Insight Support may allow an unauthenticated attacker to execute code.

A remote authentication bypass issue exists in some OneView APIs.

A security vulnerability in HPE Smart Update Manager (SUM) prior to version 8.5.6 could allow remote unauthorized access. Hewlett Packard Enterprise has provided a software update to resolve this vulnerability in HPE Smart Update Manager (SUM) prior to 8.5.6. Please visit the HPE Support Center at https://support.hpe.com/hpesc/public/home to download the latest version of HPE Smart Update Manager (SUM). Download the latest version of HPE Smart Update Manager (SUM) or download the latest Service Pack For ProLiant (SPP).

Unathenticated directory traversal in the ReceiverServlet class doPost() method can lead to arbitrary remote code execution in HPE Pay Per Use (PPU) Utility Computing Service (UCS) Meter version 1.9.

A vulnerability in the web-based management interface of EdgeConnect SD-WAN Orchestrator could allow an authenticated remote attacker to run arbitrary commands on the underlying host. Successful exploitation of this vulnerability allows an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

A potential local adjacent arbitrary code execution vulnerability that could potentially lead to a loss of confidentiality, integrity, and availability was discovered in HPE Integrated Lights-Out 5 (iLO 5) in Version: 2.71. Hewlett Packard Enterprise has provided updated firmware for HPE Integrated Lights-Out 5 (iLO 5) that addresses this security vulnerability.

An hsqldb-related remote code execution vulnerability exists in HPE AutoPass License Server (APLS) prior to 9.18.

A vulnerability in the web-based management interface of EdgeConnect SD-WAN Orchestrator could allow an unauthenticated remote attacker to run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.

A security vulnerability has been identified in HPE Athonet Mobile Core software. The core application contains a code injection vulnerability where a threat actor could execute arbitrary commands with the privilege of the underlying container leading to complete takeover of the target system.

An hsqldb-related remote code execution vulnerability exists in HPE AutoPass License Server (APLS) prior to 9.17.

A remote code execution security vulnerability has been identified in all versions of the HP ArcSight WINC Connector prior to v7.3.0.

A local code execution security vulnerability was identified in HP Network Node Manager i (NNMi) v10.00, v10.10 and v10.20 Software.

A remote code injection vulnerability was discovered in HPE KVM IP Console Switches version(s): G2 4x1Ex32 Prior to 2.8.3.

An arbitrary file upload vulnerability in the component /Production/UploadFile of NUS-M9 ERP Management Software v3.0.0 allows attackers to execute arbitrary code via uploading crafted files.

Improper Control of Generation of Code ('Code Injection') vulnerability in NitroPack Inc. NitroPack allows Code Injection.This issue affects NitroPack: from n/a through 1.16.7.

An issue in TuomoKu SPx-GC v.1.3.0 and before allows a remote attacker to execute arbitrary code via the child_process.js function.

D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.

Cobbler before 3.3.0 allows log poisoning, and resultant Remote Code Execution, via an XMLRPC method that logs to the logfile for template injection.

A Command Injection vulnerability exists in formWriteFacMac of the httpd binary in Tenda AC9 v15.03.06.42. As a result, attacker can execute OS commands with root privileges.