HPE Cray Parallel Application Launch Service (PALS) is subject to an authentication bypass.
A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
An authentication bypass vulnerability exists in HPE StoreOnce Software.
A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration.
SSMC3.7.0.0 is vulnerable to remote authentication bypass. HPE StoreServ Management Console (SSMC) 3.7.0.0 is an off node multiarray manager web application and remains isolated from data on the managed arrays. HPE has provided an update to HPE StoreServ Management Console (SSMC) software 3.7.0.0* Upgrade to HPE 3PAR StoreServ Management Console 3.7.1.1 or later.
Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
There are vulnerabilities in the Soft AP Daemon Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.
Command injection vulnerability in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
There is a vulnerability in the AP Certificate Management Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.
There are vulnerabilities in the Soft AP Daemon Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.
Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
Certain HP Print products and Digital Sending products may be vulnerable to potential remote code execution and buffer overflow with use of Link-Local Multicast Name Resolution or LLMNR.
A potential security vulnerability has been identified in OMEN Gaming Hub and in HP Command Center which may allow escalation of privilege and/or denial of service. HP has released software updates to mitigate the potential vulnerability.
Certain HP Enterprise LaserJet, HP LaserJet Managed, HP Enterprise PageWide, HP PageWide Managed products may be vulnerable to potential buffer overflow.
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.296 and 14.x through 18.x before 18.0.0.194 on Windows and OS X and before 11.2.202.468 on Linux allows remote attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in June 2015.
IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.5, 6.1.0.0 through 6.1.0.4, and 6.1.1.0 through 6.1.1.1 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 215888.
There are command injection vulnerabilities in the underlying Soft AP Daemon service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.
There is a command injection vulnerability in the underlying deauthentication service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
There are buffer overflow vulnerabilities in the underlying Central Communications service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.
There is a command injection vulnerability in the underlying Central Communications service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
HP Color LaserJet Pro M280-M281 Multifunction Printer series (before v. 20190419), HP LaserJet Pro MFP M28-M31 Printer series (before v. 20190426) may have an IPP Parser potentially vulnerable to Buffer Overflow.
Potential security vulnerabilities have been identified with HPE Nimble Storage systems in multi array group configurations. The vulnerabilities could be exploited by an attacker to gain elevated privileges on the array. The following NimbleOS versions, and all subsequent releases, contain a software fix for this vulnerability: 3.9.2.0, 4.5.5.0, 5.0.8.0 and 5.1.3.0.
A security vulnerability has been identified in HPE SimpliVity 380 Gen 9, HPE SimpliVity 380 Gen 10, HPE SimpliVity 380 Gen 10 G, HPE SimpliVity 2600 Gen 10, SimpliVity OmniCube, SimpliVity OmniStack for Cisco, SimpliVity OmniStack for Lenovo and SimpliVity OmniStack for Dell nodes. An API is used to execute a command manifest file during upgrade does not correctly prevent directory traversal and so can be used to execute manifest files in arbitrary locations on the node. The API does not require user authentication and is accessible over the management network, resulting in the potential for unauthenticated remote execution of manifest files. For all customers running HPE OmniStack version 3.7.9 and earlier. HPE recommends upgrading the OmniStack software to version 3.7.10 or later, which contains a permanent resolution. Customers and partners who can upgrade to 3.7.10 should upgrade at the earliest convenience. For all customers and partners unable to upgrade their environments to the recommended version 3.7.10, HPE has created a Temporary Workaround https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=mmr_sf-EN_US000061901&withFrame for you to implement. All customer should upgrade to the recommended 3.7.10 or later version at the earliest convenience.
Potential security vulnerabilities have been discovered on a certain HP LaserJet Pro printer that may allow an unauthorized user to reconfigure, reset the device.
Potential security vulnerabilities have been identified in an OMEN Gaming Hub SDK package which may allow escalation of privilege and/or denial of service. HP is releasing software updates to mitigate the potential vulnerabilities.
There is a buffer overflow vulnerability in the underlying L2/L3 Management service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
In Eclipse Jetty Server, versions 9.2.x and older, 9.3.x (all non HTTP/1.x configurations), and 9.4.x (all HTTP/1.x configurations), when presented with two content-lengths headers, Jetty ignored the second. When presented with a content-length and a chunked encoding header, the content-length was ignored (as per RFC 2616). If an intermediary decided on the shorter length, but still passed on the longer body, then body content could be interpreted by Jetty as a pipelined request. If the intermediary was imposing authorization, the fake pipelined request would bypass that authorization.
There is a buffer overflow vulnerability in the underlying SAE (Simultaneous Authentication of Equals) service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
There are buffer overflow vulnerabilities in the underlying CLI service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.
Pre-auth memory corruption in HPE Serviceguard
A potential security vulnerability has been identified in Hewlett Packard Enterprise OfficeConnect 1820, 1850, and 1920S Network switches. The vulnerability could be remotely exploited to allow authentication bypass. HPE has made the following software updates to resolve the vulnerability in Hewlett Packard Enterprise OfficeConnect 1820, 1850 and 1920S Network switches versions: Prior to PT.02.14; Prior to PC.01.22; Prior to PO.01.21; Prior to PD.02.22;
Unauthenticated Java deserialization vulnerability in Serviceguard Manager
A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software, prior to version 1.22. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration. HPE has released a software update to resolve the vulnerability in the HPE Edgeline Infrastructure Manager.
A potential security vulnerability in HPE Ezmeral Data Fabric that may allow a remote access restriction bypass in the TEZ MapR ecosystem component was discovered in version(s): Prior to Tez-0.8: mapr-tez-0.8.201907081100-1.noarch; prior to Tez-0.9: mapr-tez-0.9.201907090334-1.noarch; prior to Tez-0.9.2: mapr-tez-0.9.2.0.201907081043-1.noarch. HPE has provided software updates to resolve the vulnerability in the TEZ MapR ecosystem component in HPE Ezmeral Data Fabric.
A remote unauthenticated directory traversal security vulnerability has been identified in HPE iLO Amplifier Pack versions 1.80, 1.81, 1.90 and 1.95. The vulnerability could be remotely exploited to allow an unauthenticated user to run arbitrary code leading complete impact to confidentiality, integrity, and availability of the iLO Amplifier Pack appliance.
A potential security vulnerability has been identified in HPE 3PAR StoreServ, HPE Primera Storage and HPE Alletra 9000 Storage array firmware. An unauthenticated user could remotely exploit the low complexity issue to execute code as administrator. This vulnerability impacts completely the confidentiality, integrity, availability of the array. HPE has made the following software updates and mitigation information to resolve the vulnerability in 3PAR, Primera and Alletra 9000 firmware.
A potential security vulnerability was identified in HPE iLO Amplifier Pack. The vulnerabilities could be remotely exploited to allow remote code execution.
A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a stack based buffer overflow using user supplied input to the `khuploadfile.cgi` CGI ELF. The stack based buffer overflow could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available.
A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a directory traversal in user supplied input to the `khuploadfile.cgi` CGI ELF. The directory traversal could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available.
HP ProCurve Manager (PCM) 3.20 and 4.0, PCM+ 3.20 and 4.0, Identity Driven Manager (IDM) 4.0, and Application Lifecycle Management allow remote attackers to execute arbitrary code via a marshalled object to (1) EJBInvokerServlet or (2) JMXInvokerServlet, aka ZDI-CAN-1760. NOTE: this is probably a duplicate of CVE-2007-1036, CVE-2010-0738, and/or CVE-2012-0874.
A adddevicetoview expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A faultdevparasset expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A perfselecttask expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A customtemplateselect expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A quicktemplateselect expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A operatorgroupselectcontent expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A faultparasset expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A devgroupselect expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A reporttaskselect expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).
A faultstatchoosefaulttype expression language injection remote code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).