In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask() UBSAN reports the following 'subtraction overflow' error when booting in a virtual machine on Android: | Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4 | Hardware name: linux,dummy-virt (DT) | pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cancel_delayed_work+0x34/0x44 | lr : cancel_delayed_work+0x2c/0x44 | sp : ffff80008002ba60 | x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0 | x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058 | x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d | x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000 | x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000 | x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553 | x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620 | x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | cancel_delayed_work+0x34/0x44 | deferred_probe_extend_timeout+0x20/0x70 | driver_register+0xa8/0x110 | __platform_driver_register+0x28/0x3c | syscon_init+0x24/0x38 | do_one_initcall+0xe4/0x338 | do_initcall_level+0xac/0x178 | do_initcalls+0x5c/0xa0 | do_basic_setup+0x20/0x30 | kernel_init_freeable+0x8c/0xf8 | kernel_init+0x28/0x1b4 | ret_from_fork+0x10/0x20 | Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception This is due to shift_and_mask() using a signed immediate to construct the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so that it ends up decrementing from INT_MIN. Use an unsigned constant '1U' to generate the mask in shift_and_mask().

In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure.

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions.

In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller

In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exec and file release The perf pending task work is never waited upon the matching event release. In the case of a child event, released via free_event() directly, this can potentially result in a leaked event, such as in the following scenario that doesn't even require a weak IRQ work implementation to trigger: schedule() prepare_task_switch() =======> <NMI> perf_event_overflow() event->pending_sigtrap = ... irq_work_queue(&event->pending_irq) <======= </NMI> perf_event_task_sched_out() event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) task_work_add(&event->pending_task) finish_lock_switch() =======> <IRQ> perf_pending_irq() //do nothing, rely on pending task work <======= </IRQ> begin_new_exec() perf_event_exit_task() perf_event_exit_event() // If is child event free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // event is leaked Similar scenarios can also happen with perf_event_remove_on_exec() or simply against concurrent perf_event_release(). Fix this with synchonizing against the possibly remaining pending task work while freeing the event, just like is done with remaining pending IRQ work. This means that the pending task callback neither need nor should hold a reference to the event, preventing it from ever beeing freed.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix TTLM teardown work The worker calculates the wrong sdata pointer, so if it ever runs, it'll crash. Fix that.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: fix panic caused by partcmd_update We find a bug as below: BUG: unable to handle page fault for address: 00000003 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 358 Comm: bash Tainted: G W I 6.6.0-10893-g60d6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/4 RIP: 0010:partition_sched_domains_locked+0x483/0x600 Code: 01 48 85 d2 74 0d 48 83 05 29 3f f8 03 01 f3 48 0f bc c2 89 c0 48 9 RSP: 0018:ffffc90000fdbc58 EFLAGS: 00000202 RAX: 0000000100000003 RBX: ffff888100b3dfa0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000002fe80 RBP: ffff888100b3dfb0 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc90000fdbcb0 R11: 0000000000000004 R12: 0000000000000002 R13: ffff888100a92b48 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f44a5425740(0000) GS:ffff888237d80000(0000) knlGS:0000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000100030973 CR3: 000000010722c000 CR4: 00000000000006e0 Call Trace: <TASK> ? show_regs+0x8c/0xa0 ? __die_body+0x23/0xa0 ? __die+0x3a/0x50 ? page_fault_oops+0x1d2/0x5c0 ? partition_sched_domains_locked+0x483/0x600 ? search_module_extables+0x2a/0xb0 ? search_exception_tables+0x67/0x90 ? kernelmode_fixup_or_oops+0x144/0x1b0 ? __bad_area_nosemaphore+0x211/0x360 ? up_read+0x3b/0x50 ? bad_area_nosemaphore+0x1a/0x30 ? exc_page_fault+0x890/0xd90 ? __lock_acquire.constprop.0+0x24f/0x8d0 ? __lock_acquire.constprop.0+0x24f/0x8d0 ? asm_exc_page_fault+0x26/0x30 ? partition_sched_domains_locked+0x483/0x600 ? partition_sched_domains_locked+0xf0/0x600 rebuild_sched_domains_locked+0x806/0xdc0 update_partition_sd_lb+0x118/0x130 cpuset_write_resmask+0xffc/0x1420 cgroup_file_write+0xb2/0x290 kernfs_fop_write_iter+0x194/0x290 new_sync_write+0xeb/0x160 vfs_write+0x16f/0x1d0 ksys_write+0x81/0x180 __x64_sys_write+0x21/0x30 x64_sys_call+0x2f25/0x4630 do_syscall_64+0x44/0xb0 entry_SYSCALL_64_after_hwframe+0x78/0xe2 RIP: 0033:0x7f44a553c887 It can be reproduced with cammands: cd /sys/fs/cgroup/ mkdir test cd test/ echo +cpuset > ../cgroup.subtree_control echo root > cpuset.cpus.partition cat /sys/fs/cgroup/cpuset.cpus.effective 0-3 echo 0-3 > cpuset.cpus // taking away all cpus from root This issue is caused by the incorrect rebuilding of scheduling domains. In this scenario, test/cpuset.cpus.partition should be an invalid root and should not trigger the rebuilding of scheduling domains. When calling update_parent_effective_cpumask with partcmd_update, if newmask is not null, it should recheck newmask whether there are cpus is available for parect/cs that has tasks.

In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Switch from mutex to spinlock for irqfds irqfd_wakeup() gets EPOLLHUP, when it is called by eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which gets called under spin_lock_irqsave(). We can't use a mutex here as it will lead to a deadlock. Fix it by switching over to a spin lock.

In the Linux kernel, the following vulnerability has been resolved: riscv/purgatory: align riscv_kernel_entry When alignment handling is delegated to the kernel, everything must be word-aligned in purgatory, since the trap handler is then set to the kexec one. Without the alignment, hitting the exception would ultimately crash. On other occasions, the kernel's handler would take care of exceptions. This has been tested on a JH7110 SoC with oreboot and its SBI delegating unaligned access exceptions and the kernel configured to handle them.

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Prevent release of buffer in I/O When a task waiting for completion of a Store Data operation is interrupted, an attempt is made to halt this operation. If this attempt fails due to a hardware or firmware problem, there is a chance that the SCLP facility might store data into buffers referenced by the original operation at a later time. Handle this situation by not releasing the referenced data buffers if the halt attempt fails. For current use cases, this might result in a leak of few pages of memory in case of a rare hardware/firmware malfunction.

In the Linux kernel, the following vulnerability has been resolved: sched/smt: Fix unbalance sched_smt_present dec/inc I got the following warn report while doing stress test: jump label: negative count! WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0 Call Trace: <TASK> __static_key_slow_dec_cpuslocked+0x16/0x70 sched_cpu_deactivate+0x26e/0x2a0 cpuhp_invoke_callback+0x3ad/0x10d0 cpuhp_thread_fun+0x3f5/0x680 smpboot_thread_fn+0x56d/0x8d0 kthread+0x309/0x400 ret_from_fork+0x41/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(), the cpu offline failed, but sched_smt_present is decremented before calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so fix it by incrementing sched_smt_present in the error path.

In the Linux kernel, the following vulnerability has been resolved: net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex The carrier_lock spinlock protects the carrier detection. While it is held, framer_get_status() is called which in turn takes a mutex. This is not correct and can lead to a deadlock. A run with PROVE_LOCKING enabled detected the issue: [ BUG: Invalid wait context ] ... c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78 other info that might help us debug this: context-{4:4} 2 locks held by ifconfig/146: #0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664 #1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98 Avoid the spinlock usage and convert carrier_lock to a mutex.

In the Linux kernel, the following vulnerability has been resolved: padata: Fix possible divide-by-0 panic in padata_mt_helper() We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] <TASK> [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] </TASK> Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix CT entry update leaks of modify header context The cited commit allocates a new modify header to replace the old one when updating CT entry. But if failed to allocate a new one, eg. exceed the max number firmware can support, modify header will be an error pointer that will trigger a panic when deallocating it. And the old modify header point is copied to old attr. When the old attr is freed, the old modify header is lost. Fix it by restoring the old attr to attr when failed to allocate a new modify header context. So when the CT entry is freed, the right modify header context will be freed. And the panic of accessing error pointer is also fixed.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON() when freeing tree block after error When freeing a tree block, at btrfs_free_tree_block(), if we fail to create a delayed reference we don't deal with the error and just do a BUG_ON(). The error most likely to happen is -ENOMEM, and we have a comment mentioning that only -ENOMEM can happen, but that is not true, because in case qgroups are enabled any error returned from btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned from btrfs_search_slot() for example) can be propagated back to btrfs_free_tree_block(). So stop doing a BUG_ON() and return the error to the callers and make them abort the transaction to prevent leaking space. Syzbot was triggering this, likely due to memory allocation failure injection.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a deadlock in dma buf fence polling Introduce a version of the fence ops that on release doesn't remove the fence from the pending list, and thus doesn't require a lock to fix poll->fence wait->fence unref deadlocks. vmwgfx overwrites the wait callback to iterate over the list of all fences and update their status, to do that it holds a lock to prevent the list modifcations from other threads. The fence destroy callback both deletes the fence and removes it from the list of pending fences, for which it holds a lock. dma buf polling cb unrefs a fence after it's been signaled: so the poll calls the wait, which signals the fences, which are being destroyed. The destruction tries to acquire the lock on the pending fences list which it can never get because it's held by the wait from which it was called. Old bug, but not a lot of userspace apps were using dma-buf polling interfaces. Fix those, in particular this fixes KDE stalls/deadlock.

In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace.

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: rename cpu_number1 to dummy_cpu_number The per cpu variable cpu_number1 is passed to xlnx_event_handler as argument "dev_id", but it is not used in this function. So drop the initialization of this variable and rename it to dummy_cpu_number. This patch is to fix the following call trace when the kernel option CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53 Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT) Call trace: dump_backtrace+0xd0/0xe0 show_stack+0x18/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x10c/0x140 __might_sleep+0x4c/0xa0 __kmem_cache_alloc_node+0xf4/0x168 kmalloc_trace+0x28/0x38 __request_percpu_irq+0x74/0x138 xlnx_event_manager_probe+0xf8/0x298 platform_probe+0x68/0xd8

In the Linux kernel, the following vulnerability has been resolved: drm/xe/preempt_fence: enlarge the fence critical section It is really easy to introduce subtle deadlocks in preempt_fence_work_func() since we operate on single global ordered-wq for signalling our preempt fences behind the scenes, so even though we signal a particular fence, everything in the callback should be in the fence critical section, since blocking in the callback will prevent other published fences from signalling. If we enlarge the fence critical section to cover the entire callback, then lockdep should be able to understand this better, and complain if we grab a sensitive lock like vm->lock, which is also held when waiting on preempt fences.

In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Re-add exception handling in load_fpu_state() With the recent rewrite of the fpu code exception handling for the lfpc instruction within load_fpu_state() was erroneously removed. Add it again to prevent that loading invalid floating point register values cause an unhandled specification exception.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Handle invalid decoder vsi Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi is valid for future use.

In the Linux kernel, the following vulnerability has been resolved: bpf: add missing check_func_arg_reg_off() to prevent out-of-bounds memory accesses Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to a global function as an argument. The adverse effects of this is that BPF helpers can continue to make use of this modified CONST_PTR_TO_DYNPTR from within the context of the global function, which can unintentionally result in out-of-bounds memory accesses and therefore compromise overall system stability i.e. [ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140 [ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302 [ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533 [ 244.174318] Call Trace: [ 244.175787] <TASK> [ 244.177356] dump_stack_lvl+0x66/0xa0 [ 244.179531] print_report+0xce/0x670 [ 244.182314] ? __virt_addr_valid+0x200/0x3e0 [ 244.184908] kasan_report+0xd7/0x110 [ 244.187408] ? bpf_dynptr_data+0x137/0x140 [ 244.189714] ? bpf_dynptr_data+0x137/0x140 [ 244.192020] bpf_dynptr_data+0x137/0x140 [ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26 [ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23 [ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570 [ 244.204744] ? 0xffffffffc0009e58 [ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10 [ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b [ 244.215922] bpf_trampoline_6442502480+0x43/0xe3 [ 244.218691] __x64_sys_prlimit64+0x9/0xf0 [ 244.220912] do_syscall_64+0xc1/0x1d0 [ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 244.226458] RIP: 0033:0x7ffa3eb8f059 [ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48 [ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e [ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059 [ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0 [ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000 [ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80 [ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000 [ 244.268303] </TASK> Add a check_func_arg_reg_off() to the path in which the BPF verifier verifies the arguments of global function arguments, specifically those which take an argument of type ARG_PTR_TO_DYNPTR | MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any explicit and strict type matching on the supplied register type, so let's also enforce that a register either type PTR_TO_STACK or CONST_PTR_TO_DYNPTR is by the caller.

In the Linux kernel, the following vulnerability has been resolved: mm, slub: do not call do_slab_free for kfence object In 782f8906f805 the freeing of kfence objects was moved from deep inside do_slab_free to the wrapper functions outside. This is a nice change, but unfortunately it missed one spot in __kmem_cache_free_bulk. This results in a crash like this: BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840 slab_err (mm/slub.c:1129) free_to_partial_list (mm/slub.c:? mm/slub.c:4036) slab_pad_check (mm/slub.c:864 mm/slub.c:1290) check_slab (mm/slub.c:?) free_to_partial_list (mm/slub.c:3171 mm/slub.c:4036) kmem_cache_alloc_bulk (mm/slub.c:? mm/slub.c:4495 mm/slub.c:4586 mm/slub.c:4635) napi_build_skb (net/core/skbuff.c:348 net/core/skbuff.c:527 net/core/skbuff.c:549) All the other callers to do_slab_free appear to be ok. Add a kfence_free check in __kmem_cache_free_bulk to avoid the crash.

In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests.

In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: fix memory leak for not ip packets Free the unused skb when not ip packets arrive.

In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid BUG_ON() while continue reshape after reassembling Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata.

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix shift-out-of-bounds in dbDiscardAG When searching for the next smaller log2 block, BLKSTOL2() returned 0, causing shift exponent -1 to be negative. This patch fixes the issue by exiting the loop directly when negative shift is found.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Fix out-of-bound access If an ATU violation was caused by a CPU Load operation, the SPID could be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array).

In the Linux kernel, the following vulnerability has been resolved: dma: fix call order in dmam_free_coherent dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03

In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Move per CPU pointer access into the atomic section The recent fix for making the take over of the broadcast timer more reliable retrieves a per CPU pointer in preemptible context. This went unnoticed as compilers hoist the access into the non-preemptible region where the pointer is actually used. But of course it's valid that the compiler keeps it at the place where the code puts it which rightfully triggers: BUG: using smp_processor_id() in preemptible [00000000] code: caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0 Move it to the actual usage site which is in a non-preemptible region.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix opregion leak Being part o the display, ideally the setup and cleanup would be done by display itself. However this is a bigger refactor that needs to be done on both i915 and xe. For now, just fix the leak: unreferenced object 0xffff8881a0300008 (size 192): comm "modprobe", pid 4354, jiffies 4295647021 hex dump (first 32 bytes): 00 00 87 27 81 88 ff ff 18 80 9b 00 00 c9 ff ff ...'............ 18 81 9b 00 00 c9 ff ff 00 00 00 00 00 00 00 00 ................ backtrace (crc 99260e31): [<ffffffff823ce65b>] kmemleak_alloc+0x4b/0x80 [<ffffffff81493be2>] kmalloc_trace_noprof+0x312/0x3d0 [<ffffffffa1345679>] intel_opregion_setup+0x89/0x700 [xe] [<ffffffffa125bfaf>] xe_display_init_noirq+0x2f/0x90 [xe] [<ffffffffa1199ec3>] xe_device_probe+0x7a3/0xbf0 [xe] [<ffffffffa11f3713>] xe_pci_probe+0x333/0x5b0 [xe] [<ffffffff81af6be8>] local_pci_probe+0x48/0xb0 [<ffffffff81af8778>] pci_device_probe+0xc8/0x280 [<ffffffff81d09048>] really_probe+0xf8/0x390 [<ffffffff81d0937a>] __driver_probe_device+0x8a/0x170 [<ffffffff81d09503>] driver_probe_device+0x23/0xb0 [<ffffffff81d097b7>] __driver_attach+0xc7/0x190 [<ffffffff81d0628d>] bus_for_each_dev+0x7d/0xd0 [<ffffffff81d0851e>] driver_attach+0x1e/0x30 [<ffffffff81d07ac7>] bus_add_driver+0x117/0x250 (cherry picked from commit 6f4e43a2f771b737d991142ec4f6d4b7ff31fbb4)

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memleak in io_init_wq_offload() I got memory leak report when doing fuzz test: BUG: memory leak unreferenced object 0xffff888107310a80 (size 96): comm "syz-executor.6", pid 4610, jiffies 4295140240 (age 20.135s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<000000001974933b>] kmalloc include/linux/slab.h:591 [inline] [<000000001974933b>] kzalloc include/linux/slab.h:721 [inline] [<000000001974933b>] io_init_wq_offload fs/io_uring.c:7920 [inline] [<000000001974933b>] io_uring_alloc_task_context+0x466/0x640 fs/io_uring.c:7955 [<0000000039d0800d>] __io_uring_add_tctx_node+0x256/0x360 fs/io_uring.c:9016 [<000000008482e78c>] io_uring_add_tctx_node fs/io_uring.c:9052 [inline] [<000000008482e78c>] __do_sys_io_uring_enter fs/io_uring.c:9354 [inline] [<000000008482e78c>] __se_sys_io_uring_enter fs/io_uring.c:9301 [inline] [<000000008482e78c>] __x64_sys_io_uring_enter+0xabc/0xc20 fs/io_uring.c:9301 [<00000000b875f18f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000b875f18f>] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 [<000000006b0a8484>] entry_SYSCALL_64_after_hwframe+0x44/0xae CPU0 CPU1 io_uring_enter io_uring_enter io_uring_add_tctx_node io_uring_add_tctx_node __io_uring_add_tctx_node __io_uring_add_tctx_node io_uring_alloc_task_context io_uring_alloc_task_context io_init_wq_offload io_init_wq_offload hash = kzalloc hash = kzalloc ctx->hash_map = hash ctx->hash_map = hash <- one of the hash is leaked When calling io_uring_enter() in parallel, the 'hash_map' will be leaked, add uring_lock to protect 'hash_map'.

In the Linux kernel, the following vulnerability has been resolved: serial: core: check uartclk for zero to avoid divide by zero Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: <TASK> serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Rule: add

In the Linux kernel, the following vulnerability has been resolved: block: initialize integrity buffer to zero before writing it to media Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes.

In the Linux kernel, the following vulnerability has been resolved: ata: pata_macio: Fix DMA table overflow Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing in pata-macio since commit 09fe2bfa6b83 ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K"). For example: kernel BUG at drivers/ata/pata_macio.c:544! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac ... NIP pata_macio_qc_prep+0xf4/0x190 LR pata_macio_qc_prep+0xfc/0x190 Call Trace: 0xc1421660 (unreliable) ata_qc_issue+0x14c/0x2d4 __ata_scsi_queuecmd+0x200/0x53c ata_scsi_queuecmd+0x50/0xe0 scsi_queue_rq+0x788/0xb1c __blk_mq_issue_directly+0x58/0xf4 blk_mq_plug_issue_direct+0x8c/0x1b4 blk_mq_flush_plug_list.part.0+0x584/0x5e0 __blk_flush_plug+0xf8/0x194 __submit_bio+0x1b8/0x2e0 submit_bio_noacct_nocheck+0x230/0x304 btrfs_work_helper+0x200/0x338 process_one_work+0x1a8/0x338 worker_thread+0x364/0x4c0 kthread+0x100/0x104 start_kernel_thread+0x10/0x14 That commit increased max_segment_size to 64KB, with the justification that the SCSI core was already using that size when PAGE_SIZE == 64KB, and that there was existing logic to split over-sized requests. However with a sufficiently large request, the splitting logic causes each sg to be split into two commands in the DMA table, leading to overflow of the DMA table, triggering the BUG_ON(). With default settings the bug doesn't trigger, because the request size is limited by max_sectors_kb == 1280, however max_sectors_kb can be increased, and apparently some distros do that by default using udev rules. Fix the bug for 4KB kernels by reverting to the old max_segment_size. For 64KB kernels the sg_tablesize needs to be halved, to allow for the possibility that each sg will be split into two.

In the Linux kernel, the following vulnerability has been resolved: md: Fix missing release of 'active_io' for flush submit_flushes atomic_set(&mddev->flush_pending, 1); rdev_for_each_rcu(rdev, mddev) atomic_inc(&mddev->flush_pending); bi->bi_end_io = md_end_flush submit_bio(bi); /* flush io is done first */ md_end_flush if (atomic_dec_and_test(&mddev->flush_pending)) percpu_ref_put(&mddev->active_io) -> active_io is not released if (atomic_dec_and_test(&mddev->flush_pending)) -> missing release of active_io For consequence, mddev_suspend() will wait for 'active_io' to be zero forever. Fix this problem by releasing 'active_io' in submit_flushes() if 'flush_pending' is decreased to zero.

cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).

In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix incomplete endpoint checking While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them. Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present. This patch has not been tested on real hardware. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline] vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399 ... Similar issue also found by Syzkaller:

In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: net: netlink: af_netlink: Prevent empty skb by adding a check on len. Adding a check on len parameter to avoid empty skb. This prevents a division error in netem_enqueue function which is caused when skb->len=0 and skb->data_len=0 in the randomized corruption step as shown below. skb->data[prandom_u32() % skb_headlen(skb)] ^= 1<<(prandom_u32() % 8); Crash Report: [ 343.170349] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 [ 343.216110] netem: version 1.3 [ 343.235841] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 343.236680] CPU: 3 PID: 4288 Comm: reproducer Not tainted 5.16.0-rc1+ [ 343.237569] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 [ 343.238707] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem] [ 343.239499] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f 74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03 [ 343.241883] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246 [ 343.242589] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX: 0000000000000000 [ 343.243542] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI: ffff88800f8eda40 [ 343.244474] RBP: ffff88800bcd7458 R08: 0000000000000000 R09: ffffffff94fb8445 [ 343.245403] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12: 0000000000000000 [ 343.246355] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15: 0000000000000020 [ 343.247291] FS: 00007fdde2bd7700(0000) GS:ffff888109780000(0000) knlGS:0000000000000000 [ 343.248350] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 343.249120] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4: 00000000000006e0 [ 343.250076] Call Trace: [ 343.250423] <TASK> [ 343.250713] ? memcpy+0x4d/0x60 [ 343.251162] ? netem_init+0xa0/0xa0 [sch_netem] [ 343.251795] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.252443] netem_enqueue+0xe28/0x33c0 [sch_netem] [ 343.253102] ? stack_trace_save+0x87/0xb0 [ 343.253655] ? filter_irq_stacks+0xb0/0xb0 [ 343.254220] ? netem_init+0xa0/0xa0 [sch_netem] [ 343.254837] ? __kasan_check_write+0x14/0x20 [ 343.255418] ? _raw_spin_lock+0x88/0xd6 [ 343.255953] dev_qdisc_enqueue+0x50/0x180 [ 343.256508] __dev_queue_xmit+0x1a7e/0x3090 [ 343.257083] ? netdev_core_pick_tx+0x300/0x300 [ 343.257690] ? check_kcov_mode+0x10/0x40 [ 343.258219] ? _raw_spin_unlock_irqrestore+0x29/0x40 [ 343.258899] ? __kasan_init_slab_obj+0x24/0x30 [ 343.259529] ? setup_object.isra.71+0x23/0x90 [ 343.260121] ? new_slab+0x26e/0x4b0 [ 343.260609] ? kasan_poison+0x3a/0x50 [ 343.261118] ? kasan_unpoison+0x28/0x50 [ 343.261637] ? __kasan_slab_alloc+0x71/0x90 [ 343.262214] ? memcpy+0x4d/0x60 [ 343.262674] ? write_comp_data+0x2f/0x90 [ 343.263209] ? __kasan_check_write+0x14/0x20 [ 343.263802] ? __skb_clone+0x5d6/0x840 [ 343.264329] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.264958] dev_queue_xmit+0x1c/0x20 [ 343.265470] netlink_deliver_tap+0x652/0x9c0 [ 343.266067] netlink_unicast+0x5a0/0x7f0 [ 343.266608] ? netlink_attachskb+0x860/0x860 [ 343.267183] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.267820] ? write_comp_data+0x2f/0x90 [ 343.268367] netlink_sendmsg+0x922/0xe80 [ 343.268899] ? netlink_unicast+0x7f0/0x7f0 [ 343.269472] ? __sanitizer_cov_trace_pc+0x21/0x60 [ 343.270099] ? write_comp_data+0x2f/0x90 [ 343.270644] ? netlink_unicast+0x7f0/0x7f0 [ 343.271210] sock_sendmsg+0x155/0x190 [ 343.271721] ____sys_sendmsg+0x75f/0x8f0 [ 343.272262] ? kernel_sendmsg+0x60/0x60 [ 343.272788] ? write_comp_data+0x2f/0x90 [ 343.273332] ? write_comp_data+0x2f/0x90 [ 343.273869] ___sys_sendmsg+0x10f/0x190 [ 343.274405] ? sendmsg_copy_msghdr+0x80/0x80 [ 343.274984] ? slab_post_alloc_hook+0x70/0x230 [ 343.275597] ? futex_wait_setup+0x240/0x240 [ 343.276175] ? security_file_alloc+0x3e/0x170 [ 343.276779] ? write_comp_d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame() Syzkaller reported [1] hitting a warning after failing to allocate resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will not help much in this case, it might be prudent to switch to netdev_warn_once(). At the very least it will suppress syzkaller reports such as [1]. Just in case, use netdev_warn_once() in send_prp_supervision_frame() for similar reasons. [1] HSR: Could not send supervision frame WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 ... Call Trace: <IRQ> hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x764/0xb20 kernel/time/timer.c:2022 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035 __do_softirq+0x21a/0x8de kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649 ... This issue is also found in older kernels (at least up to 5.10).

A flaw was found in the Framebuffer Console (fbcon) in the Linux Kernel. When providing font->width and font->height greater than 32 to fbcon_set_font, since there are no checks in place, a shift-out-of-bounds occurs leading to undefined behavior and possible denial of service.

In the Linux kernel, the following vulnerability has been resolved: ext4: check dot and dotdot of dx_root before making dir indexed Syzbot reports a issue as follows: ============================================ BUG: unable to handle page fault for address: ffffed11022e24fe PGD 23ffee067 P4D 23ffee067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 5079 Comm: syz-executor306 Not tainted 6.10.0-rc5-g55027e689933 #0 Call Trace: <TASK> make_indexed_dir+0xdaf/0x13c0 fs/ext4/namei.c:2341 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2451 ext4_rename fs/ext4/namei.c:3936 [inline] ext4_rename2+0x26e5/0x4370 fs/ext4/namei.c:4214 [...] ============================================ The immediate cause of this problem is that there is only one valid dentry for the block to be split during do_split, so split==0 results in out of bounds accesses to the map triggering the issue. do_split unsigned split dx_make_map count = 1 split = count/2 = 0; continued = hash2 == map[split - 1].hash; ---> map[4294967295] The maximum length of a filename is 255 and the minimum block size is 1024, so it is always guaranteed that the number of entries is greater than or equal to 2 when do_split() is called. But syzbot's crafted image has no dot and dotdot in dir, and the dentry distribution in dirblock is as follows: bus dentry1 hole dentry2 free |xx--|xx-------------|...............|xx-------------|...............| 0 12 (8+248)=256 268 256 524 (8+256)=264 788 236 1024 So when renaming dentry1 increases its name_len length by 1, neither hole nor free is sufficient to hold the new dentry, and make_indexed_dir() is called. In make_indexed_dir() it is assumed that the first two entries of the dirblock must be dot and dotdot, so bus and dentry1 are left in dx_root because they are treated as dot and dotdot, and only dentry2 is moved to the new leaf block. That's why count is equal to 1. Therefore add the ext4_check_dx_root() helper function to add more sanity checks to dot and dotdot before starting the conversion to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Validate passed in drm syncobj handles in the performance extension If userspace provides an unknown or invalid handle anywhere in the handle array the rest of the driver will not handle that well. Fix it by checking handle was looked up successfully or otherwise fail the extension by jumping into the existing unwind. (cherry picked from commit a546b7e4d73c23838d7e4d2c92882b3ca902d213)

In the Linux kernel, the following vulnerability has been resolved: bpf: Fail bpf_timer_cancel when callback is being cancelled Given a schedule: timer1 cb timer2 cb bpf_timer_cancel(timer2); bpf_timer_cancel(timer1); Both bpf_timer_cancel calls would wait for the other callback to finish executing, introducing a lockup. Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps track of all in-flight cancellation requests for a given BPF timer. Whenever cancelling a BPF timer, we must check if we have outstanding cancellation requests, and if so, we must fail the operation with an error (-EDEADLK) since cancellation is synchronous and waits for the callback to finish executing. This implies that we can enter a deadlock situation involving two or more timer callbacks executing in parallel and attempting to cancel one another. Note that we avoid incrementing the cancelling counter for the target timer (the one being cancelled) if bpf_timer_cancel is not invoked from a callback, to avoid spurious errors. The whole point of detecting cur->cancelling and returning -EDEADLK is to not enter a busy wait loop (which may or may not lead to a lockup). This does not apply in case the caller is in a non-callback context, the other side can continue to cancel as it sees fit without running into errors. Background on prior attempts: Earlier versions of this patch used a bool 'cancelling' bit and used the following pattern under timer->lock to publish cancellation status. lock(t->lock); t->cancelling = true; mb(); if (cur->cancelling) return -EDEADLK; unlock(t->lock); hrtimer_cancel(t->timer); t->cancelling = false; The store outside the critical section could overwrite a parallel requests t->cancelling assignment to true, to ensure the parallely executing callback observes its cancellation status. It would be necessary to clear this cancelling bit once hrtimer_cancel is done, but lack of serialization introduced races. Another option was explored where bpf_timer_start would clear the bit when (re)starting the timer under timer->lock. This would ensure serialized access to the cancelling bit, but may allow it to be cleared before in-flight hrtimer_cancel has finished executing, such that lockups can occur again. Thus, we choose an atomic counter to keep track of all outstanding cancellation requests and use it to prevent lockups in case callbacks attempt to cancel each other while executing in parallel.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: add missing lock protection when polling Add missing lock protection in poll routine when iterating xarray, otherwise: Even with RCU read lock held, only the slot of the radix tree is ensured to be pinned there, while the data structure (e.g. struct cachefiles_req) stored in the slot has no such guarantee. The poll routine will iterate the radix tree and dereference cachefiles_req accordingly. Thus RCU read lock is not adequate in this case and spinlock is needed here.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: detect stuck ECSA element in probe resp We recently added some validation that we don't try to connect to an AP that is currently in a channel switch process, since that might want the channel to be quiet or we might not be able to connect in time to hear the switching in a beacon. This was in commit c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process"). However, we promptly got a report that this caused new connection failures, and it turns out that the AP that we now cannot connect to is permanently advertising an extended channel switch announcement, even with quiet. The AP in question was an Asus RT-AC53, with firmware 3.0.0.4.380_10760-g21a5898. As a first step, attempt to detect that we're dealing with such a situation, so mac80211 can use this later.

An issue was discovered in the Linux kernel 5.4 and 5.5 through 5.5.6 on the AArch64 architecture. It ignores the top byte in the address passed to the brk system call, potentially moving the memory break downwards when the application expects it to move upwards, aka CID-dcde237319e6. This has been observed to cause heap corruption with the GNU C Library malloc implementation.