In the Linux kernel, the following vulnerability has been resolved: cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference. Add NULL check after cpufreq_cpu_get_raw() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL pointer dereference in tipc_mon_reinit_self() syzbot reported: tipc: Node number set to 1055423674 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 3 UID: 0 PID: 6017 Comm: kworker/3:5 Not tainted 6.15.0-rc1-syzkaller-00246-g900241a5cc15 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events tipc_net_finalize_work RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tipc_net_finalize+0x10b/0x180 net/tipc/net.c:140 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> ... RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 There is a racing condition between workqueue created when enabling bearer and another thread created when disabling bearer right after that as follow: enabling_bearer | disabling_bearer --------------- | ---------------- tipc_disc_timeout() | { | bearer_disable() ... | { schedule_work(&tn->work); | tipc_mon_delete() ... | { } | ... | write_lock_bh(&mon->lock); | mon->self = NULL; | write_unlock_bh(&mon->lock); | ... | } tipc_net_finalize_work() | } { | ... | tipc_net_finalize() | { | ... | tipc_mon_reinit_self() | { | ... | write_lock_bh(&mon->lock); | mon->self->addr = tipc_own_addr(net); | write_unlock_bh(&mon->lock); | ... ---truncated---

In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists") added some additional CPUs to the Spectre-BHB workaround, including some new arrays for designs that require new 'k' values for the workaround to be effective. Unfortunately, the new arrays omitted the sentinel entry and so is_midr_in_range_list() will walk off the end when it doesn't find a match. With UBSAN enabled, this leads to a crash during boot when is_midr_in_range_list() is inlined (which was more common prior to c8c2647e69be ("arm64: Make  _midr_in_range_list() an exported function")): | Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP | pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : spectre_bhb_loop_affected+0x28/0x30 | lr : is_spectre_bhb_affected+0x170/0x190 | [...] | Call trace: | spectre_bhb_loop_affected+0x28/0x30 | update_cpu_capabilities+0xc0/0x184 | init_cpu_features+0x188/0x1a4 | cpuinfo_store_boot_cpu+0x4c/0x60 | smp_prepare_boot_cpu+0x38/0x54 | start_kernel+0x8c/0x478 | __primary_switched+0xc8/0xd4 | Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: aarch64 BRK: Fatal exception Add the missing sentinel entries.

In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool() Clang static checker (scan-build) warning: net/ethtool/ioctl.c:line 2233, column 2 Called function pointer is null (null dereference). Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix this typo error.

In the Linux kernel, the following vulnerability has been resolved: net: clear the dst when changing skb protocol A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel NULL pointer dereference, address: 0000000000000000 ip6_rcv_core (net/ipv6/ip6_input.c:190:20) ipv6_rcv (net/ipv6/ip6_input.c:306:8) process_backlog (net/core/dev.c:6186:4) napi_poll (net/core/dev.c:6906:9) net_rx_action (net/core/dev.c:7028:13) do_softirq (kernel/softirq.c:462:3) netif_rx (net/core/dev.c:5326:3) dev_loopback_xmit (net/core/dev.c:4015:2) ip_mc_finish_output (net/ipv4/ip_output.c:363:8) NF_HOOK (./include/linux/netfilter.h:314:9) ip_mc_output (net/ipv4/ip_output.c:400:5) dst_output (./include/net/dst.h:459:9) ip_local_out (net/ipv4/ip_output.c:130:9) ip_send_skb (net/ipv4/ip_output.c:1496:8) udp_send_skb (net/ipv4/udp.c:1040:8) udp_sendmsg (net/ipv4/udp.c:1328:10) The output interface has a 4->6 program attached at ingress. We try to loop the multicast skb back to the sending socket. Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr and changes skb->protocol to v6. We enter ip6_rcv_core which tries to use skb_dst(). But the dst is still an IPv4 one left after IPv4 mcast output. Clear the dst in all BPF helpers which change the protocol. Try to preserve metadata dsts, those may carry non-routing metadata.

Null pointer reference in some Intel(R) Graphics Drivers for Windows* before version 26.20.100.7212 and before version Linux kernel version 5.5 may allow a privileged user to potentially enable a denial of service via local access.

An issue was discovered in the Linux kernel through 5.16-rc6. ef100_update_stats in drivers/net/ethernet/sfc/ef100_nic.c lacks check of the return value of kmalloc().

In the Linux kernel, the following vulnerability has been resolved: i2c: cros-ec-tunnel: defer probe if parent EC is not present When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent device will not be found, leading to NULL pointer dereference. That can also be reproduced by unbinding the controller driver and then loading i2c-cros-ec-tunnel module (or binding the device). [ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 271.998215] #PF: supervisor read access in kernel mode [ 272.003351] #PF: error_code(0x0000) - not-present page [ 272.008485] PGD 0 P4D 0 [ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI [ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5 [ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC [ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021 [ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel] [ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9 [ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282 [ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000 [ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00 [ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000 [ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000 [ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10 [ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000 [ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0 [ 272.129155] Call Trace: [ 272.131606] <TASK> [ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110 [ 272.137985] platform_probe+0x69/0xa0 [ 272.141652] really_probe+0x152/0x310 [ 272.145318] __driver_probe_device+0x77/0x110 [ 272.149678] driver_probe_device+0x1e/0x190 [ 272.153864] __driver_attach+0x10b/0x1e0 [ 272.157790] ? driver_attach+0x20/0x20 [ 272.161542] bus_for_each_dev+0x107/0x150 [ 272.165553] bus_add_driver+0x15d/0x270 [ 272.169392] driver_register+0x65/0x110 [ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698] [ 272.182617] do_one_initcall+0x110/0x350 [ 272.186543] ? security_kernfs_init_security+0x49/0xd0 [ 272.191682] ? __kernfs_new_node+0x1b9/0x240 [ 272.195954] ? security_kernfs_init_security+0x49/0xd0 [ 272.201093] ? __kernfs_new_node+0x1b9/0x240 [ 272.205365] ? kernfs_link_sibling+0x105/0x130 [ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0 [ 272.214773] ? kernfs_activate+0x57/0x70 [ 272.218699] ? kernfs_add_one+0x118/0x160 [ 272.222710] ? __kernfs_create_file+0x71/0xa0 [ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110 [ 272.232033] ? internal_create_group+0x453/0x4a0 [ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0 [ 272.241355] ? __free_frozen_pages+0x1dc/0x420 [ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0 [ 272.250505] ? load_module+0x1509/0x16f0 [ 272.254431] do_init_module+0x60/0x230 [ 272.258181] __se_sys_finit_module+0x27a/0x370 [ 272.262627] do_syscall_64+0x6a/0xf0 [ 272.266206] ? do_syscall_64+0x76/0xf0 [ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90 [ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 272.279887] RIP: 0033:0x7b9309168d39 [ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8 [ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix panic in failed foilio allocation commit 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") and commit 9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of pages") save -ENOMEM in the folio array upon allocation failure and call the folio array free code. The folio array free code expects either valid folio pointers or NULL. Finding the -ENOMEM will result in a panic. Fix by NULLing the error folio entry.

In the Linux kernel, the following vulnerability has been resolved: nvme: fix multipath crash caused by flush request when blktrace is enabled The flush request initialized by blk_kick_flush has NULL bio, and it may be dealt with nvme_end_req during io completion. When blktrace is enabled, nvme_trace_bio_complete with multipath activated trying to access NULL pointer bio from flush request results in the following crash: [ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a [ 2517.835213] #PF: supervisor read access in kernel mode [ 2517.838724] #PF: error_code(0x0000) - not-present page [ 2517.842222] PGD 7b2d51067 P4D 0 [ 2517.845684] Oops: 0000 [#1] SMP NOPTI [ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S 5.15.67-0.cl9.x86_64 #1 [ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022 [ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp] [ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30 [ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba [ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286 [ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000 [ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000 [ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000 [ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8 [ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018 [ 2517.894434] FS: 0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000 [ 2517.898299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0 [ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2517.913761] PKRU: 55555554 [ 2517.917558] Call Trace: [ 2517.921294] <TASK> [ 2517.924982] nvme_complete_rq+0x1c3/0x1e0 [nvme_core] [ 2517.928715] nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp] [ 2517.932442] nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp] [ 2517.936137] ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp] [ 2517.939830] tcp_read_sock+0x9c/0x260 [ 2517.943486] nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp] [ 2517.947173] nvme_tcp_io_work+0x64/0x90 [nvme_tcp] [ 2517.950834] process_one_work+0x1e8/0x390 [ 2517.954473] worker_thread+0x53/0x3c0 [ 2517.958069] ? process_one_work+0x390/0x390 [ 2517.961655] kthread+0x10c/0x130 [ 2517.965211] ? set_kthread_struct+0x40/0x40 [ 2517.968760] ret_from_fork+0x1f/0x30 [ 2517.972285] </TASK> To avoid this situation, add a NULL check for req->bio before calling trace_block_bio_complete.

In the Linux kernel, the following vulnerability has been resolved: nbd: null check for nla_nest_start nla_nest_start() may fail and return NULL. Insert a check and set errno based on other call sites within the same source code.

An issue was discovered in the Linux kernel through 5.16-rc6. There is a lack of check after calling vzalloc() and lack of free after allocation in drivers/media/test-drivers/vidtv/vidtv_s302m.c.

An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. imx_register_uart_clocks in drivers/clk/imx/clk.c lacks check of the return value of kcalloc() and will cause the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini() Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix NULL domain on device release In the kdump kernel, the IOMMU operates in deferred_attach mode. In this mode, info->domain may not yet be assigned by the time the release_device function is called. It leads to the following crash in the crash kernel: BUG: kernel NULL pointer dereference, address: 000000000000003c ... RIP: 0010:do_raw_spin_lock+0xa/0xa0 ... _raw_spin_lock_irqsave+0x1b/0x30 intel_iommu_release_device+0x96/0x170 iommu_deinit_device+0x39/0xf0 __iommu_group_remove_device+0xa0/0xd0 iommu_bus_notifier+0x55/0xb0 notifier_call_chain+0x5a/0xd0 blocking_notifier_call_chain+0x41/0x60 bus_notify+0x34/0x50 device_del+0x269/0x3d0 pci_remove_bus_device+0x77/0x100 p2sb_bar+0xae/0x1d0 ... i801_probe+0x423/0x740 Use the release_domain mechanism to fix it. The scalable mode context entry which is not part of release domain should be cleared in release_device().

In the Linux kernel, the following vulnerability has been resolved: net: phy: fix phy_get_internal_delay accessing an empty array The phy_get_internal_delay function could try to access to an empty array in the case that the driver is calling phy_get_internal_delay without defining delay_values and rx-internal-delay-ps or tx-internal-delay-ps is defined to 0 in the device-tree. This will lead to "unable to handle kernel NULL pointer dereference at virtual address 0". To avoid this kernel oops, the test should be delay >= 0. As there is already delay < 0 test just before, the test could only be size == 0.

In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again.

In the Linux kernel, the following vulnerability has been resolved: clk: zynq: Prevent null pointer dereference caused by kmalloc failure The kmalloc() in zynq_clk_setup() will return null if the physical memory has run out. As a result, if we use snprintf() to write data to the null address, the null pointer dereference bug will happen. This patch uses a stack variable to replace the kmalloc().

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL pointer dereference in tb_port_update_credits() Olliver reported that his system crashes when plugging in Thunderbolt 1 device: BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.

In the Linux kernel before 4.20.14, expand_downwards in mm/mmap.c lacks a check for the mmap minimum address, which makes it easier for attackers to exploit kernel NULL pointer dereferences on non-SMAP platforms. This is related to a capability check for the wrong task.

In the Linux kernel, the following vulnerability has been resolved: backlight: hx8357: Fix potential NULL pointer dereference The "im" pins are optional. Add missing check in the hx8357_probe().

In the Linux kernel, the following vulnerability has been resolved: lib/Kconfig.debug: TEST_IOV_ITER depends on MMU Trying to run the iov_iter unit test on a nommu system such as the qemu kc705-nommu emulation results in a crash. KTAP version 1 # Subtest: iov_iter # module: kunit_iov_iter 1..9 BUG: failure at mm/nommu.c:318/vmap()! Kernel panic - not syncing: BUG! The test calls vmap() directly, but vmap() is not supported on nommu systems, causing the crash. TEST_IOV_ITER therefore needs to depend on MMU.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: handle pmk_op allocation failure The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return 0 in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_core_get NULL dereference It is possible for clk_core_get to dereference a NULL in the following sequence: clk_core_get() of_clk_get_hw_from_clkspec() __of_clk_get_hw_from_provider() __clk_get_hw() __clk_get_hw() can return NULL which is dereferenced by clk_core_get() at hw->core. Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups") the check IS_ERR_OR_NULL() was performed which would have caught the NULL. Reading the description of this function it talks about returning NULL but that cannot be so at the moment. Update the function to check for hw before dereferencing it and return NULL if hw is NULL.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd. Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel...

In the Linux kernel, the following vulnerability has been resolved: usb: core: Prevent null pointer dereference in update_port_device_state Currently, the function update_port_device_state gets the usb_hub from udev->parent by calling usb_hub_to_struct_hub. However, in case the actconfig or the maxchild is 0, the usb_hub would be NULL and upon further accessing to get port_dev would result in null pointer dereference. Fix this by introducing an if check after the usb_hub is populated.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Avoid null pointer dereference in region lookup cxl_dpa_to_region() looks up a region based on a memdev and DPA. It wrongly assumes an endpoint found mapping the DPA is also of a fully assembled region. When not true it leads to a null pointer dereference looking up the region name. This appears during testing of region lookup after a failure to assemble a BIOS defined region or if the lookup raced with the assembly of the BIOS defined region. Failure to clean up BIOS defined regions that fail assembly is an issue in itself and a fix to that problem will alleviate some of the impact. It will not alleviate the race condition so let's harden this path. The behavior change is that the kernel oops due to a null pointer dereference is replaced with a dev_dbg() message noting that an endpoint was mapped. Additional comments are added so that future users of this function can more clearly understand what it provides.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend In current scenario if Plug-out and Plug-In performed continuously there could be a chance while checking for dwc->gadget_driver in dwc3_gadget_suspend, a NULL pointer dereference may occur. Call Stack: CPU1: CPU2: gadget_unbind_driver dwc3_suspend_common dwc3_gadget_stop dwc3_gadget_suspend dwc3_disconnect_gadget CPU1 basically clears the variable and CPU2 checks the variable. Consider CPU1 is running and right before gadget_driver is cleared and in parallel CPU2 executes dwc3_gadget_suspend where it finds dwc->gadget_driver which is not NULL and resumes execution and then CPU1 completes execution. CPU2 executes dwc3_disconnect_gadget where it checks dwc->gadget_driver is already NULL because of which the NULL pointer deference occur.

In the Linux kernel, the following vulnerability has been resolved: vfio/fsl-mc: Block calling interrupt handler without trigger The eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object is initially NULL and may become NULL if the user sets the trigger eventfd to -1. The interrupt handler itself is guaranteed that trigger is always valid between request_irq() and free_irq(), but the loopback testing mechanisms to invoke the handler function need to test the trigger. The triggering and setting ioctl paths both make use of igate and are therefore mutually exclusive. The vfio-fsl-mc driver does not make use of irqfds, nor does it support any sort of masking operations, therefore unlike vfio-pci and vfio-platform, the flow can remain essentially unchanged.

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()' In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fixed integer types and null check locations [why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null check

In the Linux kernel, the following vulnerability has been resolved: clk: meson: Add missing clocks to axg_clk_regmaps Some clocks were missing from axg_clk_regmaps, which caused kernel panic during cat /sys/kernel/debug/clk/clk_summary [ 57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc ... [ 57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.436900] pc : regmap_read+0x1c/0x88 [ 57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.445611] sp : ffff800082f1b690 [ 57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70 [ 57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000 [ 57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000 [ 57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff [ 57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000 [ 57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100 [ 57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24 [ 57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710 [ 57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000 [ 57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000 [ 57.519615] Call trace: [ 57.522030] regmap_read+0x1c/0x88 [ 57.525393] clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.530050] clk_core_is_enabled+0x44/0x120 [ 57.534190] clk_summary_show_subtree+0x154/0x2f0 [ 57.538847] clk_summary_show_subtree+0x220/0x2f0 [ 57.543505] clk_summary_show_subtree+0x220/0x2f0 [ 57.548162] clk_summary_show_subtree+0x220/0x2f0 [ 57.552820] clk_summary_show_subtree+0x220/0x2f0 [ 57.557477] clk_summary_show_subtree+0x220/0x2f0 [ 57.562135] clk_summary_show_subtree+0x220/0x2f0 [ 57.566792] clk_summary_show_subtree+0x220/0x2f0 [ 57.571450] clk_summary_show+0x84/0xb8 [ 57.575245] seq_read_iter+0x1bc/0x4b8 [ 57.578954] seq_read+0x8c/0xd0 [ 57.582059] full_proxy_read+0x68/0xc8 [ 57.585767] vfs_read+0xb0/0x268 [ 57.588959] ksys_read+0x70/0x108 [ 57.592236] __arm64_sys_read+0x24/0x38 [ 57.596031] invoke_syscall+0x50/0x128 [ 57.599740] el0_svc_common.constprop.0+0x48/0xf8 [ 57.604397] do_el0_svc+0x28/0x40 [ 57.607675] el0_svc+0x34/0xb8 [ 57.610694] el0t_64_sync_handler+0x13c/0x158 [ 57.615006] el0t_64_sync+0x190/0x198 [ 57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00) [ 57.624668] ---[ end trace 0000000000000000 ]--- [jbrunet: add missing Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: host: Fix dereference issue in DDMA completion flow. Fixed variable dereference issue in DDMA completion flow.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal On unloading of the scmi_perf_domain module got the below splat, when in the DT provided to the system under test the '#power-domain-cells' property was missing. Indeed, this particular setup causes the probe to bail out early without giving any error, which leads to the ->remove() callback gets to run too, but without all the expected initialized structures in place. Add a check and bail out early on remove too. Call trace: scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain] scmi_dev_remove+0x28/0x40 [scmi_core] device_remove+0x54/0x90 device_release_driver_internal+0x1dc/0x240 driver_detach+0x58/0xa8 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x70 scmi_driver_unregister+0x28/0x180 [scmi_core] scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain] __arm64_sys_delete_module+0x1a8/0x2c0 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Support specifying the srpt_service_guid parameter Make loading ib_srpt with this parameter set work. The current behavior is that setting that parameter while loading the ib_srpt kernel module triggers the following kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> parse_one+0x18c/0x1d0 parse_args+0xe1/0x230 load_module+0x8de/0xa60 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x181/0x240 __x64_sys_finit_module+0x5a/0xb0 do_syscall_64+0x5f/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76

In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: access device through ctx instead of peer The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix delayed ACKs to not set the reference serial number Fix the construction of delayed ACKs to not set the reference serial number as they can't be used as an RTT reference.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security During our fuzz testing of the connection and disconnection process at the RFCOMM layer, we discovered this bug. By comparing the packets from a normal connection and disconnection process with the testcase that triggered a KASAN report. We analyzed the cause of this bug as follows: 1. In the packets captured during a normal connection, the host sends a `Read Encryption Key Size` type of `HCI_CMD` packet (Command Opcode: 0x1408) to the controller to inquire the length of encryption key.After receiving this packet, the controller immediately replies with a Command Completepacket (Event Code: 0x0e) to return the Encryption Key Size. 2. In our fuzz test case, the timing of the controller's response to this packet was delayed to an unexpected point: after the RFCOMM and L2CAP layers had disconnected but before the HCI layer had disconnected. 3. After receiving the Encryption Key Size Response at the time described in point 2, the host still called the rfcomm_check_security function. However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;` had already been released, and when the function executed `return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`, specifically when accessing `conn->hcon`, a null-ptr-deref error occurred. To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling rfcomm_recv_frame in rfcomm_process_rx.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv Fixes potential null pointer dereference warnings in the dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up() functions. In both functions, the 'dc_dmub_srv' variable was being dereferenced before it was checked for null. This could lead to a null pointer dereference if 'dc_dmub_srv' is null. The fix is to check if 'dc_dmub_srv' is null before dereferencing it. Thus moving the null checks for 'dc_dmub_srv' to the beginning of the functions to ensure that 'dc_dmub_srv' is not null when it is dereferenced. Found by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128) drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)

In the Linux kernel, the following vulnerability has been resolved: Revert "kobject: Remove redundant checks for whether ktype is NULL" This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31. It is reported to cause problems, so revert it for now until the root cause can be found.

In the Linux kernel, the following vulnerability has been resolved: tipc: Check the bearer type before calling tipc_udp_nl_bearer_add() syzbot reported the following general protection fault [1]: general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087] ... RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291 ... Call Trace: <TASK> tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646 tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367 netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b The cause of this issue is that when tipc_nl_bearer_add() is called with the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called even if the bearer is not UDP. tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that the media_ptr field of the tipc_bearer has an udp_bearer type object, so the function goes crazy for non-UDP bearers. This patch fixes the issue by checking the bearer type before calling tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ #311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: target: pscsi: Fix bio_put() for error case As of commit 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit() and kfree(). That is not done properly for the error case, hitting WARN and NULL pointer dereference in bio_free().

In the Linux kernel, the following vulnerability has been resolved: xsk: fix usage of multi-buffer BPF helpers for ZC XDP Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail().

In the Linux kernel, the following vulnerability has been resolved: block: Fix iterating over an empty bio with bio_for_each_folio_all If the bio contains no data, bio_first_folio() calls page_folio() on a NULL pointer and oopses. Move the test that we've reached the end of the bio from bio_next_folio() to bio_first_folio(). [axboe: add unlikely() to error case]