In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: sof-common: Add NULL check for normal_link string It's not granted that all entries of struct sof_conn_stream declare a `normal_link` (a non-SOF, direct link) string, and this is the case for SoCs that support only SOF paths (hence do not support both direct and SOF usecases). For example, in the case of MT8188 there is no normal_link string in any of the sof_conn_stream entries and there will be more drivers doing that in the future. To avoid possible NULL pointer KPs, add a NULL check for `normal_link`.

In the Linux kernel, the following vulnerability has been resolved: fpga: bridge: add owner module and take its refcount The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_bridge struct and use it to take the module's refcount. Modify the function for registering a bridge to take an additional owner module parameter and rename it to avoid conflicts. Use the old function name for a helper macro that automatically sets the module that registers the bridge as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a bridge without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga bridge. Other changes: opportunistically move put_device() from __fpga_bridge_get() to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since the bridge device is taken in these functions.

In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: call request_irq() after NAPI initialized The mlxbf_gige driver encounters a NULL pointer exception in mlxbf_gige_open() when kdump is enabled. The sequence to reproduce the exception is as follows: a) enable kdump b) trigger kdump via "echo c > /proc/sysrq-trigger" c) kdump kernel executes d) kdump kernel loads mlxbf_gige module e) the mlxbf_gige module runs its open() as the the "oob_net0" interface is brought up f) mlxbf_gige module will experience an exception during its open(), something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] SMP CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : __napi_poll+0x40/0x230 sp : ffff800008003e00 x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8 x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000 x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000 x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0 x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398 x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2 x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238 Call trace: 0x0 net_rx_action+0x178/0x360 __do_softirq+0x15c/0x428 __irq_exit_rcu+0xac/0xec irq_exit+0x18/0x2c handle_domain_irq+0x6c/0xa0 gic_handle_irq+0xec/0x1b0 call_on_irq_stack+0x20/0x2c do_interrupt_handler+0x5c/0x70 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x7c/0x80 __setup_irq+0x4c0/0x950 request_threaded_irq+0xf4/0x1bc mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige] mlxbf_gige_open+0x5c/0x170 [mlxbf_gige] __dev_open+0x100/0x220 __dev_change_flags+0x16c/0x1f0 dev_change_flags+0x2c/0x70 do_setlink+0x220/0xa40 __rtnl_newlink+0x56c/0x8a0 rtnl_newlink+0x58/0x84 rtnetlink_rcv_msg+0x138/0x3c4 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x2ec/0x360 netlink_sendmsg+0x278/0x490 __sock_sendmsg+0x5c/0x6c ____sys_sendmsg+0x290/0x2d4 ___sys_sendmsg+0x84/0xd0 __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x54/0x184 do_el0_svc+0x30/0xac el0_svc+0x48/0x160 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Code: bad PC value ---[ end trace 7d1c3f3bf9d81885 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x2870a7a00000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x0,000005c1,a3332a5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- The exception happens because there is a pending RX interrupt before the call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires immediately after this request_irq() completes. The ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: Fix potential null pointer dereference In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may return NULL as ptp_header due to abnormal packet type or corrupted packet. Fix this bug by adding ptp_header check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix null pointer access when abort scan During cancel scan we might use vif that weren't scanning. Fix this by using the actual scanning vif.

In the Linux kernel, the following vulnerability has been resolved: selinux: avoid dereference of garbage after mount failure In case kern_mount() fails and returns an error pointer return in the error branch instead of continuing and dereferencing the error pointer. While on it drop the never read static variable selinuxfs_mount.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: ti: Add a null pointer check to the omap_prm_domain_init devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Disable MACsec offload for uplink representor profile MACsec offload is not supported in switchdev mode for uplink representors. When switching to the uplink representor profile, the MACsec offload feature must be cleared from the netdevice's features. If left enabled, attempts to add offloads result in a null pointer dereference, as the uplink representor does not support MACsec offload even though the feature bit remains set. Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features(). Kernel log: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x128/0x1dd0 Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff RSP: 0018:ffff888147a4f160 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078 RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000 FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? __mutex_lock+0x128/0x1dd0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mutex_lock_io_nested+0x1ae0/0x1ae0 ? lock_acquire+0x1c2/0x530 ? macsec_upd_offload+0x145/0x380 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? kasan_save_stack+0x30/0x40 ? kasan_save_stack+0x20/0x40 ? kasan_save_track+0x10/0x30 ? __kasan_kmalloc+0x77/0x90 ? __kmalloc_noprof+0x249/0x6b0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core] macsec_update_offload+0x26c/0x820 ? macsec_set_mac_address+0x4b0/0x4b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? _raw_spin_unlock_irqrestore+0x47/0x50 macsec_upd_offload+0x2c8/0x380 ? macsec_update_offload+0x820/0x820 ? __nla_parse+0x22/0x30 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240 genl_family_rcv_msg_doit+0x1cc/0x2a0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? cap_capable+0xd4/0x330 genl_rcv_msg+0x3ea/0x670 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? macsec_update_offload+0x820/0x820 netlink_rcv_skb+0x12b/0x390 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? netlink_ack+0xd80/0xd80 ? rwsem_down_read_slowpath+0xf90/0xf90 ? netlink_deliver_tap+0xcd/0xac0 ? netlink_deliver_tap+0x155/0xac0 ? _copy_from_iter+0x1bb/0x12c0 genl_rcv+0x24/0x40 netlink_unicast+0x440/0x700 ? netlink_attachskb+0x760/0x760 ? lock_acquire+0x1c2/0x530 ? __might_fault+0xbb/0x170 netlink_sendmsg+0x749/0xc10 ? netlink_unicast+0x700/0x700 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x700/0x700 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x53f/0x760 ? import_iovec+0x7/0x10 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x3c0/0x3c0 ? filter_irq_stacks+0x90/0x90 ? stack_depot_save_flags+0x28/0xa30 ___sys_sen ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Julia Lawall reported this null pointer dereference, this should fix it.

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Fix potential null-ptr-deref Fix potential null-ptr-deref in hci_le_big_sync_established_evt().

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix shrinker NULL crash with cgroup_disable=memory Christian reports a NULL deref in zswap that he bisected down to the zswap shrinker. The issue also cropped up in the bug trackers of libguestfs [1] and the Red Hat bugzilla [2]. The problem is that when memcg is disabled with the boot time flag, the zswap shrinker might get called with sc->memcg == NULL. This is okay in many places, like the lruvec operations. But it crashes in memcg_page_state() - which is only used due to the non-node accounting of cgroup's the zswap memory to begin with. Nhat spotted that the memcg can be NULL in the memcg-disabled case, and I was then able to reproduce the crash locally as well. [1] https://github.com/libguestfs/libguestfs/issues/139 [2] https://bugzilla.redhat.com/show_bug.cgi?id=2275252

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev setup Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when setup() is called for a non-serdev controller.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Fix null ptr deref in btintel_read_version If hci_cmd_sync_complete() is triggered and skb is NULL, then hdev->req_skb is NULL, which will cause this issue.

In the Linux kernel, the following vulnerability has been resolved: drm/arm/malidp: fix a possible null pointer dereference In malidp_mw_connector_reset, new memory is allocated with kzalloc, but no check is performed. In order to prevent null pointer dereferencing, ensure that mw_state is checked before calling __drm_atomic_helper_connector_reset.

In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: platform_get_resource replaced by wrong function The function platform_get_resource was replaced with devm_platform_ioremap_resource_byname and is called using 0 as name. This eventually ends up in platform_get_resource_byname in the call stack, where it causes a null pointer in strcmp. if (type == resource_type(r) && !strcmp(r->name, name)) It should have been replaced with devm_platform_ioremap_resource.

In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() devm_kasprintf() returns NULL when memory allocation fails. Currently, aspeed_lpc_enable_snoop() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. [arj: Fix Fixes: tag to use subject from 3772e5da4454]

In the Linux kernel, the following vulnerability has been resolved: netfilter: tproxy: bail out if IP has been disabled on the device syzbot reports: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] [..] RIP: 0010:nf_tproxy_laddr4+0xb7/0x340 net/ipv4/netfilter/nf_tproxy_ipv4.c:62 Call Trace: nft_tproxy_eval_v4 net/netfilter/nft_tproxy.c:56 [inline] nft_tproxy_eval+0xa9a/0x1a00 net/netfilter/nft_tproxy.c:168 __in_dev_get_rcu() can return NULL, so check for this.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev suspend Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time.

In the Linux kernel, the following vulnerability has been resolved: spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe In function pci1xxxx_spi_probe, there is a potential null pointer that may be caused by a failed memory allocation by the function devm_kzalloc. Hence, a null pointer check needs to be added to prevent null pointer dereferencing later in the code. To fix this issue, spi_bus->spi_int[iter] should be checked. The memory allocated by devm_kzalloc will be automatically released, so just directly return -ENOMEM without worrying about memory leaks.

In the Linux kernel, the following vulnerability has been resolved: ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI.

In the Linux kernel, the following vulnerability has been resolved: pstore/zone: Add a null pointer check to the psz_kmsg_read kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.

In the Linux kernel, the following vulnerability has been resolved: net: phy: phy_device: Prevent nullptr exceptions on ISR If phydev->irq is set unconditionally, check for valid interrupt handler or fall back to polling mode to prevent nullptr exceptions in interrupt service routine.

In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: fix NULL function pointer dereference Baruch reported an OOPS when using the designware controller as target only. Target-only modes break the assumption of one transfer function always being available. Fix this by always checking the pointer in __i2c_transfer. [wsa: dropped the simplification in core-smbus to avoid theoretical regressions]

In the Linux kernel, the following vulnerability has been resolved: efi: fix panic in kdump kernel Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware.

In the Linux kernel, the following vulnerability has been resolved: tls: fix missing memory barrier in tls_init In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot.

In the Linux kernel, the following vulnerability has been resolved: x86/iopl: Cure TIF_IO_BITMAP inconsistencies io_bitmap_exit() is invoked from exit_thread() when a task exists or when a fork fails. In the latter case the exit_thread() cleans up resources which were allocated during fork(). io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the current task. If current has TIF_IO_BITMAP set, but no bitmap installed, tss_update_io_bitmap() crashes with a NULL pointer dereference. There are two issues, which lead to that problem: 1) io_bitmap_exit() should not invoke task_update_io_bitmap() when the task, which is cleaned up, is not the current task. That's a clear indicator for a cleanup after a failed fork(). 2) A task should not have TIF_IO_BITMAP set and neither a bitmap installed nor IOPL emulation level 3 activated. This happens when a kernel thread is created in the context of a user space thread, which has TIF_IO_BITMAP set as the thread flags are copied and the IO bitmap pointer is cleared. Other than in the failed fork() case this has no impact because kernel threads including IO workers never return to user space and therefore never invoke tss_update_io_bitmap(). Cure this by adding the missing cleanups and checks: 1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if the to be cleaned up task is not the current task. 2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user space forks it is set later, when the IO bitmap is inherited in io_bitmap_share(). For paranoia sake, add a warning into tss_update_io_bitmap() to catch the case, when that code is invoked with inconsistent state.

In the Linux kernel, the following vulnerability has been resolved: null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues' Writing 'power' and 'submit_queues' concurrently will trigger kernel panic: Test script: modprobe null_blk nr_devices=0 mkdir -p /sys/kernel/config/nullb/nullb0 while true; do echo 1 > submit_queues; echo 4 > submit_queues; done & while true; do echo 1 > power; echo 0 > power; done Test result: BUG: kernel NULL pointer dereference, address: 0000000000000148 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:__lock_acquire+0x41d/0x28f0 Call Trace: <TASK> lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150 This is because del_gendisk() can concurrent with blk_mq_update_nr_hw_queues(): nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULL Fix this problem by resuing the global mutex to protect nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.

In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: stop interface during shutdown The mlxbf_gige driver intermittantly encounters a NULL pointer exception while the system is shutting down via "reboot" command. The mlxbf_driver will experience an exception right after executing its shutdown() method. One example of this exception is: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000 [0000000000000070] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1 Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] sp : ffff8000080d3c10 x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58 x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008 x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128 x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7 x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404 x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080 x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] __napi_poll+0x40/0x1c8 net_rx_action+0x314/0x3a0 __do_softirq+0x128/0x334 run_ksoftirqd+0x54/0x6c smpboot_thread_fn+0x14c/0x190 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002) ---[ end trace 7cc3941aa0d8e6a4 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x4ce722520000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x000005c1,a3330e5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- During system shutdown, the mlxbf_gige driver's shutdown() is always executed. However, the driver's stop() method will only execute if networking interface configuration logic within the Linux distribution has been setup to do so. If shutdown() executes but stop() does not execute, NAPI remains enabled and this can lead to an exception if NAPI is scheduled while the hardware interface has only been partially deinitialized. The networking interface managed by the mlxbf_gige driver must be properly stopped during system shutdown so that IFF_UP is cleared, the hardware interface is put into a clean state, and NAPI is fully deinitialized.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Initialize frame-based format color matching descriptor Fix NULL pointer crash in uvcg_framebased_make due to uninitialized color matching descriptor for frame-based format which was added in commit f5e7bdd34aca ("usb: gadget: uvc: Allow creating new color matching descriptors") that added handling for uncompressed and mjpeg format. Crash is seen when userspace configuration (via configfs) does not explicitly define the color matching descriptor. If color_matching is not found, config_group_find_item() returns NULL. The code then jumps to out_put_cm, where it calls config_item_put(color_matching);. If color_matching is NULL, this will dereference a null pointer, leading to a crash. [ 2.746440] Unable to handle kernel NULL pointer dereference at virtual address 000000000000008c [ 2.756273] Mem abort info: [ 2.760080] ESR = 0x0000000096000005 [ 2.764872] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.771068] SET = 0, FnV = 0 [ 2.771069] EA = 0, S1PTW = 0 [ 2.771070] FSC = 0x05: level 1 translation fault [ 2.771071] Data abort info: [ 2.771072] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 2.771073] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.771074] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.771075] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000a3e59000 [ 2.771077] [000000000000008c] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 2.771081] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 2.771084] Dumping ftrace buffer: [ 2.771085] (ftrace buffer empty) [ 2.771138] CPU: 7 PID: 486 Comm: ln Tainted: G W E 6.6.58-android15 [ 2.771139] Hardware name: Qualcomm Technologies, Inc. SunP QRD HDK (DT) [ 2.771140] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.771141] pc : __uvcg_fill_strm+0x198/0x2cc [ 2.771145] lr : __uvcg_iter_strm_cls+0xc8/0x17c [ 2.771146] sp : ffffffc08140bbb0 [ 2.771146] x29: ffffffc08140bbb0 x28: ffffff803bc81380 x27: ffffff8023bbd250 [ 2.771147] x26: ffffff8023bbd250 x25: ffffff803c361348 x24: ffffff803d8e6768 [ 2.771148] x23: 0000000000000004 x22: 0000000000000003 x21: ffffffc08140bc48 [ 2.771149] x20: 0000000000000000 x19: ffffffc08140bc48 x18: ffffffe9f8cf4a00 [ 2.771150] x17: 000000001bf64ec3 x16: 000000001bf64ec3 x15: ffffff8023bbd250 [ 2.771151] x14: 000000000000000f x13: 004c4b40000f4240 x12: 000a2c2a00051615 [ 2.771152] x11: 000000000000004f x10: ffffffe9f76b40ec x9 : ffffffe9f7e389d0 [ 2.771153] x8 : ffffff803d0d31ce x7 : 000f4240000a2c2a x6 : 0005161500028b0a [ 2.771154] x5 : ffffff803d0d31ce x4 : 0000000000000003 x3 : 0000000000000000 [ 2.771155] x2 : ffffffc08140bc50 x1 : ffffffc08140bc48 x0 : 0000000000000000 [ 2.771156] Call trace: [ 2.771157] __uvcg_fill_strm+0x198/0x2cc [ 2.771157] __uvcg_iter_strm_cls+0xc8/0x17c [ 2.771158] uvcg_streaming_class_allow_link+0x240/0x290 [ 2.771159] configfs_symlink+0x1f8/0x630 [ 2.771161] vfs_symlink+0x114/0x1a0 [ 2.771163] do_symlinkat+0x94/0x28c [ 2.771164] __arm64_sys_symlinkat+0x54/0x70 [ 2.771164] invoke_syscall+0x58/0x114 [ 2.771166] el0_svc_common+0x80/0xe0 [ 2.771168] do_el0_svc+0x1c/0x28 [ 2.771169] el0_svc+0x3c/0x70 [ 2.771172] el0t_64_sync_handler+0x68/0xbc [ 2.771173] el0t_64_sync+0x1a8/0x1ac Initialize color matching descriptor for frame-based format to prevent NULL pointer crash by mirroring the handling done for uncompressed and mjpeg formats.

In the Linux kernel, the following vulnerability has been resolved: fpga: region: add owner module and take its refcount The current implementation of the fpga region assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the region during programming if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_region struct and use it to take the module's refcount. Modify the functions for registering a region to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the region as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a region without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga region.

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix panic during namespace deletion with VF The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-imx: Add check for spi_imx_setupxfer() Add check for the return value of spi_imx_setupxfer(). spi_imx->rx and spi_imx->tx function pointer can be NULL when spi_imx_setupxfer() return error, and make NULL pointer dereference. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: 0x0 spi_imx_pio_transfer+0x50/0xd8 spi_imx_transfer_one+0x18c/0x858 spi_transfer_one_message+0x43c/0x790 __spi_pump_transfer_message+0x238/0x5d4 __spi_sync+0x2b0/0x454 spi_write_then_read+0x11c/0x200

A NULL pointer dereference flaw was found in the UNIX protocol in net/unix/diag.c In unix_diag_get_exact in the Linux Kernel. The newly allocated skb does not have sk, leading to a NULL pointer. This flaw allows a local user to crash or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel...

In the Linux kernel, the following vulnerability has been resolved: neighbour: Fix null-ptr-deref in neigh_flush_dev(). kernel test robot reported null-ptr-deref in neigh_flush_dev(). [0] The cited commit introduced per-netdev neighbour list and converted neigh_flush_dev() to use it instead of the global hash table. One thing we missed is that neigh_table_clear() calls neigh_ifdown() with NULL dev. Let's restore the hash table iteration. Note that IPv6 module is no longer unloadable, so neigh_table_clear() is called only when IPv6 fails to initialise, which is unlikely to happen. [0]: IPv6: Attempt to unregister permanent protocol 136 IPv6: Attempt to unregister permanent protocol 17 Oops: general protection fault, probably for non-canonical address 0xdffffc00000001a0: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000d00-0x0000000000000d07] CPU: 1 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.12.0-rc6-01246-gf7f52738637f #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:neigh_flush_dev.llvm.6395807810224103582+0x52/0x570 Code: c1 e8 03 42 8a 04 38 84 c0 0f 85 15 05 00 00 31 c0 41 83 3e 0a 0f 94 c0 48 8d 1c c3 48 81 c3 f8 0c 00 00 48 89 d8 48 c1 e8 03 <42> 80 3c 38 00 74 08 48 89 df e8 f7 49 93 fe 4c 8b 3b 4d 85 ff 0f RSP: 0000:ffff88810026f408 EFLAGS: 00010206 RAX: 00000000000001a0 RBX: 0000000000000d00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffc0631640 RBP: ffff88810026f470 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffffc0625250 R14: ffffffffc0631640 R15: dffffc0000000000 FS: 00007f575cb83940(0000) GS:ffff8883aee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f575db40008 CR3: 00000002bf936000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __neigh_ifdown.llvm.6395807810224103582+0x44/0x390 neigh_table_clear+0xb1/0x268 ndisc_cleanup+0x21/0x38 [ipv6] init_module+0x2f5/0x468 [ipv6] do_one_initcall+0x1ba/0x628 do_init_module+0x21a/0x530 load_module+0x2550/0x2ea0 __se_sys_finit_module+0x3d2/0x620 __x64_sys_finit_module+0x76/0x88 x64_sys_call+0x7ff/0xde8 do_syscall_64+0xfb/0x1e8 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f575d6f2719 Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 06 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007fff82a2a268 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000557827b45310 RCX: 00007f575d6f2719 RDX: 0000000000000000 RSI: 00007f575d584efd RDI: 0000000000000004 RBP: 00007f575d584efd R08: 0000000000000000 R09: 0000557827b47b00 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000020000 R13: 0000000000000000 R14: 0000557827b470e0 R15: 00007f575dbb4270 </TASK> Modules linked in: ipv6(+)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: install stub fence into potential unused fence pointers When using cpu to update page tables, vm update fences are unused. Install stub fence into these fence pointers instead of NULL to avoid NULL dereference when calling dma_fence_wait() on them.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix potential NULL-ptr-dereference in_dev_get() can return NULL which will cause a failure once idev is dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a check for NULL value in idev beforehand. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix handling of virtual Fibre Channel timeouts Hyper-V provides the ability to connect Fibre Channel LUNs to the host system and present them in a guest VM as a SCSI device. I/O to the vFC device is handled by the storvsc driver. The storvsc driver includes a partial integration with the FC transport implemented in the generic portion of the Linux SCSI subsystem so that FC attributes can be displayed in /sys. However, the partial integration means that some aspects of vFC don't work properly. Unfortunately, a full and correct integration isn't practical because of limitations in what Hyper-V provides to the guest. In particular, in the context of Hyper-V storvsc, the FC transport timeout function fc_eh_timed_out() causes a kernel panic because it can't find the rport and dereferences a NULL pointer. The original patch that added the call from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in this regard. In many cases a timeout is due to a transient condition, so the situation can be improved by just continuing to wait like with other I/O requests issued by storvsc, and avoiding the guaranteed panic. For a permanent failure, continuing to wait may result in a hung thread instead of a panic, which again may be better. So fix the panic by removing the storvsc call to fc_eh_timed_out(). This allows storvsc to keep waiting for a response. The change has been tested by users who experienced a panic in fc_eh_timed_out() due to transient timeouts, and it solves their problem. In the future we may want to deprecate the vFC functionality in storvsc since it can't be fully fixed. But it has current users for whom it is working well enough, so it should probably stay for a while longer.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Synchronize the IOCB count to be in order A system hang was observed with the following call trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 15 PID: 86747 Comm: nvme Kdump: loaded Not tainted 6.2.0+ #1 Hardware name: Dell Inc. PowerEdge R6515/04F3CJ, BIOS 2.7.3 03/31/2022 RIP: 0010:__wake_up_common+0x55/0x190 Code: 41 f6 01 04 0f 85 b2 00 00 00 48 8b 43 08 4c 8d 40 e8 48 8d 43 08 48 89 04 24 48 89 c6\ 49 8d 40 18 48 39 c6 0f 84 e9 00 00 00 <49> 8b 40 18 89 6c 24 14 31 ed 4c 8d 60 e8 41 8b 18 f6 c3 04 75 5d RSP: 0018:ffffb05a82afbba0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8f9b83a00018 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8f9b83a00020 RDI: ffff8f9b83a00018 RBP: 0000000000000001 R08: ffffffffffffffe8 R09: ffffb05a82afbbf8 R10: 70735f7472617473 R11: 5f30307832616c71 R12: 0000000000000001 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f815cf4c740(0000) GS:ffff8f9eeed80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010633a000 CR4: 0000000000350ee0 Call Trace: <TASK> __wake_up_common_lock+0x83/0xd0 qla_nvme_ls_req+0x21b/0x2b0 [qla2xxx] __nvme_fc_send_ls_req+0x1b5/0x350 [nvme_fc] nvme_fc_xmt_disconnect_assoc+0xca/0x110 [nvme_fc] nvme_fc_delete_association+0x1bf/0x220 [nvme_fc] ? nvme_remove_namespaces+0x9f/0x140 [nvme_core] nvme_do_delete_ctrl+0x5b/0xa0 [nvme_core] nvme_sysfs_delete+0x5f/0x70 [nvme_core] kernfs_fop_write_iter+0x12b/0x1c0 vfs_write+0x2a3/0x3b0 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_loop+0xd0/0x130 ? exit_to_user_mode_prepare+0xec/0x100 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f815cd3eb97 The IOCB counts are out of order and that would block any commands from going out and subsequently hang the system. Synchronize the IOCB count to be in correct order.

In the Linux kernel, the following vulnerability has been resolved: null_blk: fix poll request timeout handling When doing io_uring benchmark on /dev/nullb0, it's easy to crash the kernel if poll requests timeout triggered, as reported by David. [1] BUG: kernel NULL pointer dereference, address: 0000000000000008 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:null_timeout_rq+0x4e/0x91 Call Trace: ? null_timeout_rq+0x4e/0x91 blk_mq_handle_expired+0x31/0x4b bt_iter+0x68/0x84 ? bt_tags_iter+0x81/0x81 __sbitmap_for_each_set.constprop.0+0xb0/0xf2 ? __blk_mq_complete_request_remote+0xf/0xf bt_for_each+0x46/0x64 ? __blk_mq_complete_request_remote+0xf/0xf ? percpu_ref_get_many+0xc/0x2a blk_mq_queue_tag_busy_iter+0x14d/0x18e blk_mq_timeout_work+0x95/0x127 process_one_work+0x185/0x263 worker_thread+0x1b5/0x227 This is indeed a race problem between null_timeout_rq() and null_poll(). null_poll() null_timeout_rq() spin_lock(&nq->poll_lock) list_splice_init(&nq->poll_list, &list) spin_unlock(&nq->poll_lock) while (!list_empty(&list)) req = list_first_entry() list_del_init() ... blk_mq_add_to_batch() // req->rq_next = NULL spin_lock(&nq->poll_lock) // rq->queuelist->next == NULL list_del_init(&rq->queuelist) spin_unlock(&nq->poll_lock) Fix these problems by setting requests state to MQ_RQ_COMPLETE under nq->poll_lock protection, in which null_timeout_rq() can safely detect this race and early return. Note this patch just fix the kernel panic when request timeout happen. [1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/

In the Linux kernel, the following vulnerability has been resolved: media: vsp1: Replace vb2_is_streaming() with vb2_start_streaming_called() The vsp1 driver uses the vb2_is_streaming() function in its .buf_queue() handler to check if the .start_streaming() operation has been called, and decide whether to just add the buffer to an internal queue, or also trigger a hardware run. vb2_is_streaming() relies on the vb2_queue structure's streaming field, which used to be set only after calling the .start_streaming() operation. Commit a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops") changed this, setting the .streaming field in vb2_core_streamon() before enqueuing buffers to the driver and calling .start_streaming(). This broke the vsp1 driver which now believes that .start_streaming() has been called when it hasn't, leading to a crash: [ 881.058705] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 881.067495] Mem abort info: [ 881.070290] ESR = 0x0000000096000006 [ 881.074042] EC = 0x25: DABT (current EL), IL = 32 bits [ 881.079358] SET = 0, FnV = 0 [ 881.082414] EA = 0, S1PTW = 0 [ 881.085558] FSC = 0x06: level 2 translation fault [ 881.090439] Data abort info: [ 881.093320] ISV = 0, ISS = 0x00000006 [ 881.097157] CM = 0, WnR = 0 [ 881.100126] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004fa51000 [ 881.106573] [0000000000000020] pgd=080000004f36e003, p4d=080000004f36e003, pud=080000004f7ec003, pmd=0000000000000000 [ 881.117217] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP [ 881.123494] Modules linked in: rcar_fdp1 v4l2_mem2mem [ 881.128572] CPU: 0 PID: 1271 Comm: yavta Tainted: G B 6.2.0-rc1-00023-g6c94e2e99343 #556 [ 881.138061] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 881.145981] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 881.152951] pc : vsp1_dl_list_add_body+0xa8/0xe0 [ 881.157580] lr : vsp1_dl_list_add_body+0x34/0xe0 [ 881.162206] sp : ffff80000c267710 [ 881.165522] x29: ffff80000c267710 x28: ffff000010938ae8 x27: ffff000013a8dd98 [ 881.172683] x26: ffff000010938098 x25: ffff000013a8dc00 x24: ffff000010ed6ba8 [ 881.179841] x23: ffff00000faa4000 x22: 0000000000000000 x21: 0000000000000020 [ 881.186998] x20: ffff00000faa4000 x19: 0000000000000000 x18: 0000000000000000 [ 881.194154] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 881.201309] x14: 0000000000000000 x13: 746e696174206c65 x12: ffff70000157043d [ 881.208465] x11: 1ffff0000157043c x10: ffff70000157043c x9 : dfff800000000000 [ 881.215622] x8 : ffff80000ab821e7 x7 : 00008ffffea8fbc4 x6 : 0000000000000001 [ 881.222779] x5 : ffff80000ab821e0 x4 : ffff70000157043d x3 : 0000000000000020 [ 881.229936] x2 : 0000000000000020 x1 : ffff00000e4f6400 x0 : 0000000000000000 [ 881.237092] Call trace: [ 881.239542] vsp1_dl_list_add_body+0xa8/0xe0 [ 881.243822] vsp1_video_pipeline_run+0x270/0x2a0 [ 881.248449] vsp1_video_buffer_queue+0x1c0/0x1d0 [ 881.253076] __enqueue_in_driver+0xbc/0x260 [ 881.257269] vb2_start_streaming+0x48/0x200 [ 881.261461] vb2_core_streamon+0x13c/0x280 [ 881.265565] vb2_streamon+0x3c/0x90 [ 881.269064] vsp1_video_streamon+0x2fc/0x3e0 [ 881.273344] v4l_streamon+0x50/0x70 [ 881.276844] __video_do_ioctl+0x2bc/0x5d0 [ 881.280861] video_usercopy+0x2a8/0xc80 [ 881.284704] video_ioctl2+0x20/0x40 [ 881.288201] v4l2_ioctl+0xa4/0xc0 [ 881.291525] __arm64_sys_ioctl+0xe8/0x110 [ 881.295543] invoke_syscall+0x68/0x190 [ 881.299303] el0_svc_common.constprop.0+0x88/0x170 [ 881.304105] do_el0_svc+0x4c/0xf0 [ 881.307430] el0_svc+0x4c/0xa0 [ 881.310494] el0t_64_sync_handler+0xbc/0x140 [ 881.314773] el0t_64_sync+0x190/0x194 [ 881.318450] Code: d50323bf d65f03c0 91008263 f9800071 (885f7c60) [ 881.324551] ---[ end trace 0000000000000000 ]--- [ 881.329173] note: yavta[1271] exited with preempt_count 1 A different r ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate() The subs function argument may be NULL, so do not use it before the NULL check.

In the Linux kernel before 6.1.2, kernel/module/decompress.c misinterprets the module_get_next_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup() devm_kzalloc() may fail, clk_data->name might be NULL and will cause a NULL pointer dereference later. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix a NULL pointer dereference The LRU mechanism may look up a resource in the process of being removed from an object. The locking rules here are a bit unclear but it looks currently like res->bo assignment is protected by the LRU lock, whereas bo->resource is protected by the object lock, while *clearing* of bo->resource is also protected by the LRU lock. This means that if we check that bo->resource points to the LRU resource under the LRU lock we should be safe. So perform that check before deciding to swap out a bo. That avoids dereferencing a NULL bo->resource in ttm_bo_swapout().

In the Linux kernel before 6.2, mm/memory-tiers.c misinterprets the alloc_memory_type return value (expects it to be NULL in the error case, whereas it is actually an error pointer). NOTE: this is disputed by third parties because there are no realistic cases in which a user can cause the alloc_memory_type error case to be reached.