In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix rumble worker null pointer deref We can dereference a null pointer trying to queue work to a destroyed workqueue. If the device is disconnected, nintendo_hid_remove is called, in which the rumble_queue is destroyed. Avoid using that queue to defer rumble work once the controller state is set to JOYCON_CTLR_STATE_REMOVED. This eliminates the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: suppress non-changes to the tagging protocol The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Unmap the surface before resetting it on a plane state Switch to a new plane state requires unreferencing of all held surfaces. In the work required for mob cursors the mapped surfaces started being cached but the variable indicating whether the surface is currently mapped was not being reset. This leads to crashes as the duplicated state, incorrectly, indicates the that surface is mapped even when no surface is present. That's because after unreferencing the surface it's perfectly possible for the plane to be backed by a bo instead of a surface. Reset the surface mapped flag when unreferencing the plane state surface to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] drm_atomic_helper_cleanup_planes+0x9b/0xc0 commit_tail+0xd1/0x130 drm_atomic_helper_commit+0x11a/0x140 drm_atomic_commit+0x97/0xd0 ? __pfx___drm_printfn_info+0x10/0x10 drm_atomic_helper_update_plane+0xf5/0x160 drm_mode_cursor_universal+0x10e/0x270 drm_mode_cursor_common+0x102/0x230 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 drm_ioctl_kernel+0xb2/0x110 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 ? __pfx_drm_ioctl+0x10/0x10 vmw_generic_ioctl+0xa4/0x110 [vmwgfx] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x61/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? exc_page_fault+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f1e93f279ed Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f> RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015 RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007 R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0 R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine> CR2: 0000000000000028 ---[ end trace 0000000000000000 ]--- RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: soc: bcm: Check for NULL return of devm_kzalloc() As the potential failure of allocation, devm_kzalloc() may return NULL. Then the 'pd->pmb' and the follow lines of code may bring null pointer dereference. Therefore, it is better to check the return value of devm_kzalloc() to avoid this confusion.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix null pointer dereference of pointer perfmon In the unlikely event that pointer perfmon is null the WARN_ON return path occurs after the pointer has already been deferenced. Fix this by only dereferencing perfmon after it has been null checked.

In the Linux kernel, the following vulnerability has been resolved: team: fix null-ptr-deref when team device type is changed Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ext4: add reserved GDT blocks check We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck mount /dev/sda /mnt resize2fs /dev/sda 8G ======== BUG: kernel NULL pointer dereference, address: 0000000000000028 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748 ... RIP: 0010:ext4_flex_group_add+0xe08/0x2570 ... Call Trace: <TASK> ext4_resize_fs+0xbec/0x1660 __ext4_ioctl+0x1749/0x24e0 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xa6/0x110 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2dd739617b ======== The fix is simple, add a check in ext4_resize_begin() to make sure that the es->s_reserved_gdt_blocks is zero when the resize_inode feature is disabled.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: fix PCI-E clock oops Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]---

In the Linux kernel, the following vulnerability has been resolved: mptcp: never allow the PM to close a listener subflow Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash at mt7921_pci_remove The crash log shown it is possible that mt7921_irq_handler is called while devm_free_irq is being handled so mt76_free_device need to be postponed until devm_free_irq is completed to solve the crash we free the mt76 device too early. [ 9299.339655] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9299.339705] #PF: supervisor read access in kernel mode [ 9299.339735] #PF: error_code(0x0000) - not-present page [ 9299.339768] PGD 0 P4D 0 [ 9299.339786] Oops: 0000 [#1] SMP PTI [ 9299.339812] CPU: 1 PID: 1624 Comm: prepare-suspend Not tainted 5.15.14-1.fc32.qubes.x86_64 #1 [ 9299.339863] Hardware name: Xen HVM domU, BIOS 4.14.3 01/20/2022 [ 9299.339901] RIP: 0010:mt7921_irq_handler+0x1e/0x70 [mt7921e] [ 9299.340048] RSP: 0018:ffffa81b80c27cb0 EFLAGS: 00010082 [ 9299.340081] RAX: 0000000000000000 RBX: ffff98a4cb752020 RCX: ffffffffa96211c5 [ 9299.340123] RDX: 0000000000000000 RSI: 00000000000d4204 RDI: ffff98a4cb752020 [ 9299.340165] RBP: ffff98a4c28a62a4 R08: ffff98a4c37a96c0 R09: 0000000080150011 [ 9299.340207] R10: 0000000040000000 R11: 0000000000000000 R12: ffff98a4c4eaa080 [ 9299.340249] R13: ffff98a4c28a6360 R14: ffff98a4cb752020 R15: ffff98a4c28a6228 [ 9299.340297] FS: 00007260840d3740(0000) GS:ffff98a4ef700000(0000) knlGS:0000000000000000 [ 9299.340345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9299.340383] CR2: 0000000000000008 CR3: 0000000004c56001 CR4: 0000000000770ee0 [ 9299.340432] PKRU: 55555554 [ 9299.340449] Call Trace: [ 9299.340467] <TASK> [ 9299.340485] __free_irq+0x221/0x350 [ 9299.340527] free_irq+0x30/0x70 [ 9299.340553] devm_free_irq+0x55/0x80 [ 9299.340579] mt7921_pci_remove+0x2f/0x40 [mt7921e] [ 9299.340616] pci_device_remove+0x3b/0xa0 [ 9299.340651] __device_release_driver+0x17a/0x240 [ 9299.340686] device_driver_detach+0x3c/0xa0 [ 9299.340714] unbind_store+0x113/0x130 [ 9299.340740] kernfs_fop_write_iter+0x124/0x1b0 [ 9299.340775] new_sync_write+0x15c/0x1f0 [ 9299.340806] vfs_write+0x1d2/0x270 [ 9299.340831] ksys_write+0x67/0xe0 [ 9299.340857] do_syscall_64+0x3b/0x90 [ 9299.340887] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: vduse: Fix NULL pointer dereference on sysfs access The control device has no drvdata. So we will get a NULL pointer dereference when accessing control device's msg_timeout attribute via sysfs: [ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271) [ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094) [ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59) [ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088) [ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164) [ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230) [ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041) [ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238) [ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1)) [ 132.876319][ T3644] kernel_read (fs/read_write.c:459) [ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94) [ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186) [ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207) [ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189) [ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132) [ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419) To fix it, don't create the unneeded attribute for control device anymore.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/hdmi: check return value after calling platform_get_resource_byname() It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value. Patchwork: https://patchwork.freedesktop.org/patch/482992/

In the Linux kernel, the following vulnerability has been resolved: drm/msm/disp/dpu1: avoid clearing hw interrupts if hw_intr is null during drm uninit If edp modeset init is failed due to panel being not ready and probe defers during drm bind, avoid clearing irqs and dereference hw_intr when hw_intr is null. BUG: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: dpu_core_irq_uninstall+0x50/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c msm_drm_bind+0x580/0x5fc try_to_bring_up_master+0x168/0x1c0 __component_add+0xb4/0x178 component_add+0x1c/0x28 dp_display_probe+0x38c/0x400 platform_probe+0xb0/0xd0 really_probe+0xcc/0x2c8 __driver_probe_device+0xbc/0xe8 driver_probe_device+0x48/0xf0 __device_attach_driver+0xa0/0xc8 bus_for_each_drv+0x8c/0xd8 __device_attach+0xc4/0x150 device_initial_probe+0x1c/0x28 Changes in V2: - Update commit message and coreect fixes tag. Patchwork: https://patchwork.freedesktop.org/patch/484430/

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix null pointer dereference Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel. The root cause is null pointer defeference of bi_next in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c. BUG: kernel NULL pointer dereference, address: 000000000000002e PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1 Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021 RIP: 0010:tgl_get_bw_info+0x2de/0x510 ... [ 2.554467] Call Trace: [ 2.554467] <TASK> [ 2.554467] intel_bw_init_hw+0x14a/0x434 [ 2.554467] ? _printk+0x59/0x73 [ 2.554467] ? _dev_err+0x77/0x91 [ 2.554467] i915_driver_hw_probe+0x329/0x33e [ 2.554467] i915_driver_probe+0x4c8/0x638 [ 2.554467] i915_pci_probe+0xf8/0x14e [ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c [ 2.554467] pci_device_probe+0xaa/0x142 [ 2.554467] really_probe+0x13f/0x2f4 [ 2.554467] __driver_probe_device+0x9e/0xd3 [ 2.554467] driver_probe_device+0x24/0x7c [ 2.554467] __driver_attach+0xba/0xcf [ 2.554467] ? driver_attach+0x1f/0x1f [ 2.554467] bus_for_each_dev+0x8c/0xc0 [ 2.554467] bus_add_driver+0x11b/0x1f7 [ 2.554467] driver_register+0x60/0xea [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] i915_init+0x2c/0xb9 [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] do_one_initcall+0x12e/0x2b3 [ 2.554467] do_initcall_level+0xd6/0xf3 [ 2.554467] do_initcalls+0x4e/0x79 [ 2.554467] kernel_init_freeable+0xed/0x14d [ 2.554467] ? rest_init+0xc1/0xc1 [ 2.554467] kernel_init+0x1a/0x120 [ 2.554467] ret_from_fork+0x1f/0x30 [ 2.554467] </TASK> ... Kernel panic - not syncing: Fatal exception (cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032)

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix unregistering of framebuffers without device OF framebuffers do not have an underlying device in the Linux device hierarchy. Do a regular unregister call instead of hot unplugging such a non-existing device. Fixes a NULL dereference. An example error message on ppc64le is shown below. BUG: Kernel NULL pointer dereference on read at 0x00000060 Faulting instruction address: 0xc00000000080dfa4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries [...] CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1 NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430 REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000 CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029 GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000 GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283 GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000 GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80 GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0 GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0 GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0 NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0 [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable) [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150 [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0 [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm] [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs] [...] [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0 [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250 The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal"). Most firmware framebuffers have an underlying platform device, which can be hot-unplugged before loading the native graphics driver. OF framebuffers do not (yet) have that device. Fix the code by unregistering the framebuffer as before without a hot unplug. Tested with 5.17 on qemu ppc64le emulation.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Don't unregister on shutdown Michael Walle says he noticed the following stack trace while performing a shutdown with "reboot -f". He suggests he got "lucky" and just hit the correct spot for the reboot while there was a packet transmission in flight. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930 Hardware name: Kontron KBox A-230-LS (DT) pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_map_page+0x9c/0x254 Call trace: iommu_get_dma_domain+0x14/0x20 dma_map_page_attrs+0x1ec/0x250 enetc_start_xmit+0x14c/0x10b0 enetc_xmit+0x60/0xdc dev_hard_start_xmit+0xb8/0x210 sch_direct_xmit+0x11c/0x420 __dev_queue_xmit+0x354/0xb20 ip6_finish_output2+0x280/0x5b0 __ip6_finish_output+0x15c/0x270 ip6_output+0x78/0x15c NF_HOOK.constprop.0+0x50/0xd0 mld_sendpack+0x1bc/0x320 mld_ifc_work+0x1d8/0x4dc process_one_work+0x1e8/0x460 worker_thread+0x178/0x534 kthread+0xe0/0xe4 ret_from_fork+0x10/0x20 Code: d503201f f9416800 d503233f d50323bf (f9404c00) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt This appears to be reproducible when the board has a fixed IP address, is ping flooded from another host, and "reboot -f" is used. The following is one more manifestation of the issue: $ reboot -f kvm: exiting hardware virtualization cfg80211: failed to load regulatory.db arm-smmu 5000000.iommu: disabling translation sdhci-esdhc 2140000.mmc: Removing from iommu group 11 sdhci-esdhc 2150000.mmc: Removing from iommu group 12 fsl-edma 22c0000.dma-controller: Removing from iommu group 17 dwc3 3100000.usb: Removing from iommu group 9 dwc3 3110000.usb: Removing from iommu group 10 ahci-qoriq 3200000.sata: Removing from iommu group 2 fsl-qdma 8380000.dma-controller: Removing from iommu group 20 platform f080000.display: Removing from iommu group 0 etnaviv-gpu f0c0000.gpu: Removing from iommu group 1 etnaviv etnaviv: Removing from iommu group 1 caam_jr 8010000.jr: Removing from iommu group 13 caam_jr 8020000.jr: Removing from iommu group 14 caam_jr 8030000.jr: Removing from iommu group 15 caam_jr 8040000.jr: Removing from iommu group 16 fsl_enetc 0000:00:00.0: Removing from iommu group 4 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.1: Removing from iommu group 5 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.2: Removing from iommu group 6 fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8 mscc_felix 0000:00:00.5: Removing from iommu group 3 fsl_enetc 0000:00:00.6: Removing from iommu group 7 pcieport 0001:00:00.0: Removing from iommu group 18 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 pcieport 0002:00:00.0: Removing from iommu group 19 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_unmap_page+0x38/0xe0 Call trace: iommu_get_dma_domain+0x14/0x20 dma_unmap_page_attrs+0x38/0x1d0 en ---truncated---

In the Linux kernel before 6.5.9, there is a NULL pointer dereference in send_acknowledge in net/nfc/nci/spi.c.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check for potential null return of kmalloc_array() As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference. Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

In the Linux kernel, the following vulnerability has been resolved: mfd: ene-kb3930: Fix a potential NULL pointer dereference The off_gpios could be NULL. Add missing check in the kb3930_probe(). This is similar to the issue fixed in commit b1ba8bcb2d1f ("backlight: hx8357: Fix potential NULL pointer dereference"). This was detected by our static analysis tool.

A NULL pointer dereference flaw was found in vmxnet3_rq_cleanup in drivers/net/vmxnet3/vmxnet3_drv.c in the networking sub-component in vmxnet3 in the Linux Kernel. This issue may allow a local attacker with normal user privilege to cause a denial of service due to a missing sanity check during cleanup.

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject ro->rw reconfiguration if there are hard ro requirements [BUG] Syzbot reports the following crash: BTRFS info (device loop0 state MCS): disabling free space tree BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1) BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2) Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline] RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041 Call Trace: <TASK> btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530 btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312 btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012 btrfs_remount_rw fs/btrfs/super.c:1309 [inline] btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534 btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline] btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115 vfs_get_tree+0x90/0x2b0 fs/super.c:1800 do_new_mount+0x2be/0xb40 fs/namespace.c:3472 do_mount fs/namespace.c:3812 [inline] __do_sys_mount fs/namespace.c:4020 [inline] __se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] To support mounting different subvolume with different RO/RW flags for the new mount APIs, btrfs introduced two workaround to support this feature: - Skip mount option/feature checks if we are mounting a different subvolume - Reconfigure the fs to RW if the initial mount is RO Combining these two, we can have the following sequence: - Mount the fs ro,rescue=all,clear_cache,space_cache=v1 rescue=all will mark the fs as hard read-only, so no v2 cache clearing will happen. - Mount a subvolume rw of the same fs. We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY because our new fc is RW, different from the original fs. Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag first so that we can grab the existing fs_info. Then we reconfigure the fs to RW. - During reconfiguration, option/features check is skipped This means we will restart the v2 cache clearing, and convert back to v1 cache. This will trigger fs writes, and since the original fs has "rescue=all" option, it skips the csum tree read. And eventually causing NULL pointer dereference in super block writeback. [FIX] For reconfiguration caused by different subvolume RO/RW flags, ensure we always run btrfs_check_options() to ensure we have proper hard RO requirements met. In fact the function btrfs_check_options() doesn't really do many complex checks, but hard RO requirement and some feature dependency checks, thus there is no special reason not to do the check for mount reconfiguration.

In the Linux kernel, the following vulnerability has been resolved: can: slcan: fix freed work crash The LTP test pty03 is causing a crash in slcan: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (events) RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185) Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968 RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0 RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734 R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0 FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0 Call Trace: <TASK> worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436) kthread (/home/rich/kernel/linux/kernel/kthread.c:376) ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312) Apparently, the slcan's tx_work is freed while being scheduled. While slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work), slcan_close() (tty side) does not. So when the netdev is never set UP, but the tty is stuffed with bytes and forced to wakeup write, the work is scheduled, but never flushed. So add an additional flush_work() to slcan_close() to be sure the work is flushed under all circumstances. The Fixes commit below moved flush_work() from slcan_close() to slcan_netdev_close(). What was the rationale behind it? Maybe we can drop the one in slcan_netdev_close()? I see the same pattern in can327. So it perhaps needs the very same fix.

In the Linux kernel, the following vulnerability has been resolved: vxlan: check vxlan_vnigroup_init() return value vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline]

In the Linux kernel, the following vulnerability has been resolved: hwmon: Handle failure to register sensor with thermal zone correctly If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device.

In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Fix NULL sring after live migration A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time

A NULL pointer dereference flaw was found in dbFree in fs/jfs/jfs_dmap.c in the journaling file system (JFS) in the Linux Kernel. This issue may allow a local attacker to crash the system due to a missing sanity check.

In the Linux kernel, the following vulnerability has been resolved: net: Add rx_skb of kfree_skb to raw_tp_null_args[]. Yan Zhai reported a BPF prog could trigger a null-ptr-deref [0] in trace_kfree_skb if the prog does not check if rx_sk is NULL. Commit c53795d48ee8 ("net: add rx_sk to trace_kfree_skb") added rx_sk to trace_kfree_skb, but rx_sk is optional and could be NULL. Let's add kfree_skb to raw_tp_null_args[] to let the BPF verifier validate such a prog and prevent the issue. Now we fail to load such a prog: libbpf: prog 'drop': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; int BPF_PROG(drop, struct sk_buff *skb, void *location, @ kfree_skb_sk_null.bpf.c:21 0: (79) r3 = *(u64 *)(r1 +24) func 'kfree_skb' arg3 has btf_id 5253 type STRUCT 'sock' 1: R1=ctx() R3_w=trusted_ptr_or_null_sock(id=1) ; bpf_printk("sk: %d, %d\n", sk, sk->__sk_common.skc_family); @ kfree_skb_sk_null.bpf.c:24 1: (69) r4 = *(u16 *)(r3 +16) R3 invalid mem access 'trusted_ptr_or_null_' processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 -- END PROG LOAD LOG -- Note this fix requires commit 838a10bd2ebf ("bpf: Augment raw_tp arguments with PTR_MAYBE_NULL"). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000010 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 PREEMPT SMP RIP: 0010:bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x148/0x420 ? search_bpf_extables+0x5b/0x70 ? fixup_exception+0x27/0x2c0 ? exc_page_fault+0x75/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d bpf_trace_run4+0x68/0xd0 ? unix_stream_connect+0x1f4/0x6f0 sk_skb_reason_drop+0x90/0x120 unix_stream_connect+0x1f4/0x6f0 __sys_connect+0x7f/0xb0 __x64_sys_connect+0x14/0x20 do_syscall_64+0x47/0xc30 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() During driver initialization, the pointer of card info, i.e. the variable 'ci' is required. However, the definition of 'com20020pci_id_table' reveals that this field is empty for some devices, which will cause null pointer dereference when initializing these devices. The following log reveals it: [ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci] [ 3.975181] Call Trace: [ 3.976208] local_pci_probe+0x13f/0x210 [ 3.977248] pci_device_probe+0x34c/0x6d0 [ 3.977255] ? pci_uevent+0x470/0x470 [ 3.978265] really_probe+0x24c/0x8d0 [ 3.978273] __driver_probe_device+0x1b3/0x280 [ 3.979288] driver_probe_device+0x50/0x370 Fix this by checking whether the 'ci' is a null pointer first.

kernel/trace/ftrace.c in the Linux kernel before 2.6.35.5, when debugfs is enabled, does not properly handle interaction between mutex possession and llseek operations, which allows local users to cause a denial of service (NULL pointer dereference and outage of all function tracing files) via an lseek call on a file descriptor associated with the set_ftrace_filter file.

A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency.

In the Linux kernel, the following vulnerability has been resolved: mm/gup: handle NULL pages in unpin_user_pages() The recent addition of "pofs" (pages or folios) handling to gup has a flaw: it assumes that unpin_user_pages() handles NULL pages in the pages** array. That's not the case, as I discovered when I ran on a new configuration on my test machine. Fix this by skipping NULL pages in unpin_user_pages(), just like unpin_folios() already does. Details: when booting on x86 with "numa=fake=2 movablecore=4G" on Linux 6.12, and running this: tools/testing/selftests/mm/gup_longterm ...I get the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:sanity_check_pinned_pages+0x3a/0x2d0 ... Call Trace: <TASK> ? __die_body+0x66/0xb0 ? page_fault_oops+0x30c/0x3b0 ? do_user_addr_fault+0x6c3/0x720 ? irqentry_enter+0x34/0x60 ? exc_page_fault+0x68/0x100 ? asm_exc_page_fault+0x22/0x30 ? sanity_check_pinned_pages+0x3a/0x2d0 unpin_user_pages+0x24/0xe0 check_and_migrate_movable_pages_or_folios+0x455/0x4b0 __gup_longterm_locked+0x3bf/0x820 ? mmap_read_lock_killable+0x12/0x50 ? __pfx_mmap_read_lock_killable+0x10/0x10 pin_user_pages+0x66/0xa0 gup_test_ioctl+0x358/0xb20 __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb

A vulnerability was found in Linux Kernel where in the spk_ttyio_receive_buf2() function, it would dereference spk_ttyio_synth without checking whether it is NULL or not, and may lead to a NULL-ptr deref crash.

Null pointer reference in some Intel(R) Graphics Drivers for Windows* before version 26.20.100.7212 and before version Linux kernel version 5.5 may allow a privileged user to potentially enable a denial of service via local access.

A NULL pointer dereference in sanei_epson_net_read in SANE Backends before 1.0.30 allows a malicious device connected to the same local network as the victim to cause a denial of service, aka GHSL-2020-075.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Guard against bad data for ATIF ACPI method If a BIOS provides bad data in response to an ATIF method call this causes a NULL pointer dereference in the caller. ``` ? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1)) ? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434) ? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2)) ? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1)) ? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642) ? exc_page_fault (arch/x86/mm/fault.c:1542) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu ``` It has been encountered on at least one system, so guard for it. (cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee)

In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8

A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix possible NULL pointer dereference profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000 ---truncated---

Vixie Cron before the 3.0pl1-133 Debian package allows local users to cause a denial of service (daemon crash) via a large crontab file because the calloc return value is not checked.

In the Linux kernel, the following vulnerability has been resolved: net/handshake: fix null-ptr-deref in handshake_nl_done_doit() We should not call trace_handshake_cmd_done_err() if socket lookup has failed. Also we should call trace_handshake_cmd_done_err() before releasing the file, otherwise dereferencing sock->sk can return garbage. This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable") Unable to handle kernel paging request at virtual address dfff800000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfff800000000003] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 lr : handshake_nl_done_doit+0x180/0x9c8 sp : ffff800096e37180 x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000 x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8 x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000 x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000 x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001 x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003 x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078 x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000 Call trace: handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline] genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x56c/0x840 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908)

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages sent from one TCP socket (s1) to actually egress from another TCP socket (s2): tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg tcp_bpf_send_verdict(s1) // __SK_REDIRECT case tcp_bpf_sendmsg_redir(s2) tcp_bpf_push_locked(s2) tcp_bpf_push(s2) tcp_rate_check_app_limited(s2) // expects tcp_sock tcp_sendmsg_locked(s2) // ditto There is a hard-coded assumption in the call-chain, that the egress socket (s2) is a TCP socket. However in commit 122e6c79efe1 ("sock_map: Update sock type checks for UDP") we have enabled redirects to non-TCP sockets. This was done for the sake of BPF sk_skb programs. There was no indention to support sk_msg send-to-egress use case. As a result, attempts to send-to-egress through a non-TCP socket lead to a crash due to invalid downcast from sock to tcp_sock: BUG: kernel NULL pointer dereference, address: 000000000000002f ... Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x1f/0x70 ? page_fault_oops+0x80/0x160 ? do_user_addr_fault+0x2d7/0x800 ? rcu_is_watching+0x11/0x50 ? exc_page_fault+0x70/0x1c0 ? asm_exc_page_fault+0x27/0x30 ? tcp_tso_segs+0x14/0xa0 tcp_write_xmit+0x67/0xce0 __tcp_push_pending_frames+0x32/0xf0 tcp_push+0x107/0x140 tcp_sendmsg_locked+0x99f/0xbb0 tcp_bpf_push+0x19d/0x3a0 tcp_bpf_sendmsg_redir+0x55/0xd0 tcp_bpf_send_verdict+0x407/0x550 tcp_bpf_sendmsg+0x1a1/0x390 inet_sendmsg+0x6a/0x70 sock_sendmsg+0x9d/0xc0 ? sockfd_lookup_light+0x12/0x80 __sys_sendto+0x10e/0x160 ? syscall_enter_from_user_mode+0x20/0x60 ? __this_cpu_preempt_check+0x13/0x20 ? lockdep_hardirqs_on+0x82/0x110 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg program to prevent the crash. When attempted, user will receive an EACCES error from send/sendto/sendmsg() syscall.

On May 4, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in Clam AntiVirus (ClamAV) versions 0.103.4, 0.103.5, 0.104.1, and 0.104.2 could allow an authenticated, local attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog.

In the Linux kernel, the following vulnerability has been resolved: pstore/zone: Add a null pointer check to the psz_kmsg_read kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.

In the Linux kernel, the following vulnerability has been resolved: aio: Fix null ptr deref in aio_complete() wakeup list_del_init_careful() needs to be the last access to the wait queue entry - it effectively unlocks access. Previously, finish_wait() would see the empty list head and skip taking the lock, and then we'd return - but the completion path would still attempt to do the wakeup after the task_struct pointer had been overwritten.