In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell_rbu: Fix list usage Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493866 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: af_unix: Get user_ns from in_skb in unix_diag_get_exact(). Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/

In the Linux kernel, the following vulnerability has been resolved: backlight: pm8941: Add NULL check in wled_configure() devm_kasprintf() returns NULL when memory allocation fails. Currently, wled_configure() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pp: Fix potential NULL pointer dereference in atomctrl_initialize_mc_reg_table The function atomctrl_initialize_mc_reg_table() and atomctrl_initialize_mc_reg_table_v2_2() does not check the return value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to retrieve vram_info, it returns NULL which is later dereferenced.

In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated---

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL access in assign channel context handler Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle (ar) gets accessed from the link VIF handle (arvif) for debug logging, This is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL access, avoid radio handle access by moving to the hardware debug logging helper function (ath12k_hw_warn). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault.

In the Linux kernel, the following vulnerability has been resolved: block: reject bs > ps block devices when THP is disabled If THP is disabled and when a block device with logical block size > page size is present, the following null ptr deref panic happens during boot: [ [13.2 mK AOSAN: null-ptr-deref in range [0x0000000000000000-0x0000000000K0 0 0[07] [ 13.017749] RIP: 0010:create_empty_buffers+0x3b/0x380 <snip> [ 13.025448] Call Trace: [ 13.025692] <TASK> [ 13.025895] block_read_full_folio+0x610/0x780 [ 13.026379] ? __pfx_blkdev_get_block+0x10/0x10 [ 13.027008] ? __folio_batch_add_and_move+0x1fa/0x2b0 [ 13.027548] ? __pfx_blkdev_read_folio+0x10/0x10 [ 13.028080] filemap_read_folio+0x9b/0x200 [ 13.028526] ? __pfx_filemap_read_folio+0x10/0x10 [ 13.029030] ? __filemap_get_folio+0x43/0x620 [ 13.029497] do_read_cache_folio+0x155/0x3b0 [ 13.029962] ? __pfx_blkdev_read_folio+0x10/0x10 [ 13.030381] read_part_sector+0xb7/0x2a0 [ 13.030805] read_lba+0x174/0x2c0 <snip> [ 13.045348] nvme_scan_ns+0x684/0x850 [nvme_core] [ 13.045858] ? __pfx_nvme_scan_ns+0x10/0x10 [nvme_core] [ 13.046414] ? _raw_spin_unlock+0x15/0x40 [ 13.046843] ? __switch_to+0x523/0x10a0 [ 13.047253] ? kvm_clock_get_cycles+0x14/0x30 [ 13.047742] ? __pfx_nvme_scan_ns_async+0x10/0x10 [nvme_core] [ 13.048353] async_run_entry_fn+0x96/0x4f0 [ 13.048787] process_one_work+0x667/0x10a0 [ 13.049219] worker_thread+0x63c/0xf60 As large folio support depends on THP, only allow bs > ps block devices if THP is enabled.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc Commit 15c7fab0e047 ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") moved the allocation of Soundwire stream runtime from the Qualcomm Soundwire driver to each individual machine sound card driver, except that it forgot to update SC7280 card. Just like for other Qualcomm sound cards using Soundwire, the card driver should allocate and release the runtime. Otherwise sound playback will result in a NULL pointer dereference or other effect of uninitialized memory accesses (which was confirmed on SDM845 having similar issue).

In the Linux kernel, the following vulnerability has been resolved: ublk: fix handling recovery & reissue in ublk_abort_queue() Commit 8284066946e6 ("ublk: grab request reference when the request is handled by userspace") doesn't grab request reference in case of recovery reissue. Then the request can be requeued & re-dispatch & failed when canceling uring command. If it is one zc request, the request can be freed before io_uring returns the zc buffer back, then cause kernel panic: [ 126.773061] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 126.773657] #PF: supervisor read access in kernel mode [ 126.774052] #PF: error_code(0x0000) - not-present page [ 126.774455] PGD 0 P4D 0 [ 126.774698] Oops: Oops: 0000 [#1] SMP NOPTI [ 126.775034] CPU: 13 UID: 0 PID: 1612 Comm: kworker/u64:55 Not tainted 6.14.0_blk+ #182 PREEMPT(full) [ 126.775676] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 [ 126.776275] Workqueue: iou_exit io_ring_exit_work [ 126.776651] RIP: 0010:ublk_io_release+0x14/0x130 [ublk_drv] Fixes it by always grabbing request reference for aborting the request.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix null-ptr-deref in idpf_features_check idpf_features_check is used to validate the TX packet. skb header length is compared with the hardware supported value received from the device control plane. The value is stored in the adapter structure and to access it, vport pointer is used. During reset all the vports are released and the vport pointer that the netdev private structure points to is NULL. To avoid null-ptr-deref, store the max header length value in netdev private structure. This also helps to cache the value and avoid accessing adapter pointer in hot path. BUG: kernel NULL pointer dereference, address: 0000000000000068 ... RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x154/0x520 ? exc_page_fault+0x76/0x190 ? asm_exc_page_fault+0x26/0x30 ? idpf_features_check+0x6d/0xe0 [idpf] netif_skb_features+0x88/0x310 validate_xmit_skb+0x2a/0x2b0 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x19d/0x3a0 __dev_queue_xmit+0xb74/0xe70 ...

In the Linux kernel, the following vulnerability has been resolved: fbcon: Fix a NULL pointer dereference issue in fbcon_putcs syzbot has found a NULL pointer dereference bug in fbcon. Here is the simplified C reproducer: struct param { uint8_t type; struct tiocl_selection ts; }; int main() { struct fb_con2fbmap con2fb; struct param param; int fd = open("/dev/fb1", 0, 0); con2fb.console = 0x19; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); param.type = 2; param.ts.xs = 0; param.ts.ys = 0; param.ts.xe = 0; param.ts.ye = 0; param.ts.sel_mode = 0; int fd1 = open("/dev/tty1", O_RDWR, 0); ioctl(fd1, TIOCLINUX, &param); con2fb.console = 1; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); return 0; } After calling ioctl(fd1, TIOCLINUX, &param), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb) causes the kernel to follow a different execution path: set_con2fb_map -> con2fb_init_display -> fbcon_set_disp -> redraw_screen -> hide_cursor -> clear_selection -> highlight -> invert_screen -> do_update_region -> fbcon_putcs -> ops->putcs Since ops->putcs is a NULL pointer, this leads to a kernel panic. To prevent this, we need to call set_blitting_type() within set_con2fb_map() to properly initialize ops->putcs.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Don't crash in stack_top() for tasks without vDSO Not all tasks have a vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL vdso pointer and crash. This can for example happen when using kunit: [<9000000000203874>] stack_top+0x58/0xa8 [<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220 [<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c [<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c [<90000000003c2704>] kunit_vm_mmap+0x88/0xc8 [<9000000000410b14>] usercopy_test_init+0xbc/0x25c [<90000000003c1db4>] kunit_try_run_case+0x5c/0x184 [<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48 [<900000000022e4bc>] kthread+0xc8/0xd4 [<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations On Adva boards, SMA sysfs store/get operations can call __handle_signal_outputs() or __handle_signal_inputs() while the `irig` and `dcf` pointers are uninitialized, leading to a NULL pointer dereference in __handle_signal() and causing a kernel crash. Adva boards don't use `irig` or `dcf` functionality, so add Adva-specific callbacks `ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that avoid invoking `irig` or `dcf` input/output routines.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe() A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check. Add a NULL check for the returned pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before dereferencing se [WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: exynos7_drm_decon: add vblank check in IRQ handling If there's support for another console device (such as a TTY serial), the kernel occasionally panics during boot. The panic message and a relevant snippet of the call stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 000000000000000 Call trace: drm_crtc_handle_vblank+0x10/0x30 (P) decon_irq_handler+0x88/0xb4 [...] Otherwise, the panics don't happen. This indicates that it's some sort of race condition. Add a check to validate if the drm device can handle vblanks before calling drm_crtc_handle_vblank() to avoid this.

In the Linux kernel, the following vulnerability has been resolved: net/sched: accept TCA_STAB only for root qdisc Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] <TASK> [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_g ---truncated---

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers.

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx() build_skb() returns NULL in case of a memory allocation failure so handle it inside __octep_oq_process_rx() to avoid NULL pointer dereference. __octep_oq_process_rx() is called during NAPI polling by the driver. If skb allocation fails, keep on pulling packets out of the Rx DMA queue: we shouldn't break the polling immediately and thus falsely indicate to the octep_napi_poll() that the Rx pressure is going down. As there is no associated skb in this case, don't process the packets and don't push them up the network stack - they are skipped. Helper function is implemented to unmmap/flush all the fragment buffers used by the dropped packet. 'alloc_failures' counter is incremented to mark the skb allocation error in driver statistics. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix error propagation of split bios The purpose of btrfs_bbio_propagate_error() shall be propagating an error of split bio to its original btrfs_bio, and tell the error to the upper layer. However, it's not working well on some cases. * Case 1. Immediate (or quick) end_bio with an error When btrfs sends btrfs_bio to mirrored devices, btrfs calls btrfs_bio_end_io() when all the mirroring bios are completed. If that btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error() accesses the orig_bbio's bio context to increase the error count. That works well in most cases. However, if the end_io is called enough fast, orig_bbio's (remaining part after split) bio context may not be properly set at that time. Since the bio context is set when the orig_bbio (the last btrfs_bio) is sent to devices, that might be too late for earlier split btrfs_bio's completion. That will result in NULL pointer dereference. That bug is easily reproducible by running btrfs/146 on zoned devices [1] and it shows the following trace. [1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-5) RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs] BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0 RSP: 0018:ffffc9000006f248 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080 RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001 R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58 R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158 FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? page_fault_oops+0x13e/0x2b0 ? _printk+0x58/0x73 ? do_user_addr_fault+0x5f/0x750 ? exc_page_fault+0x76/0x240 ? asm_exc_page_fault+0x22/0x30 ? btrfs_bio_end_io+0xae/0xc0 [btrfs] ? btrfs_log_dev_io_error+0x7f/0x90 [btrfs] btrfs_orig_write_end_io+0x51/0x90 [btrfs] dm_submit_bio+0x5c2/0xa50 [dm_mod] ? find_held_lock+0x2b/0x80 ? blk_try_enter_queue+0x90/0x1e0 __submit_bio+0xe0/0x130 ? ktime_get+0x10a/0x160 ? lockdep_hardirqs_on+0x74/0x100 submit_bio_noacct_nocheck+0x199/0x410 btrfs_submit_bio+0x7d/0x150 [btrfs] btrfs_submit_chunk+0x1a1/0x6d0 [btrfs] ? lockdep_hardirqs_on+0x74/0x100 ? __folio_start_writeback+0x10/0x2c0 btrfs_submit_bbio+0x1c/0x40 [btrfs] submit_one_bio+0x44/0x60 [btrfs] submit_extent_folio+0x13f/0x330 [btrfs] ? btrfs_set_range_writeback+0xa3/0xd0 [btrfs] extent_writepage_io+0x18b/0x360 [btrfs] extent_write_locked_range+0x17c/0x340 [btrfs] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs] run_delalloc_cow+0x71/0xd0 [btrfs] btrfs_run_delalloc_range+0x176/0x500 [btrfs] ? find_lock_delalloc_range+0x119/0x260 [btrfs] writepage_delalloc+0x2ab/0x480 [btrfs] extent_write_cache_pages+0x236/0x7d0 [btrfs] btrfs_writepages+0x72/0x130 [btrfs] do_writepages+0xd4/0x240 ? find_held_lock+0x2b/0x80 ? wbc_attach_and_unlock_inode+0x12c/0x290 ? wbc_attach_and_unlock_inode+0x12c/0x29 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does not check for this case, which can result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs8409: Fix possible NULL dereference If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then NULL pointer dereference will occur in the next line. Since dolphin_fixups function is a hda_fixup function which is not supposed to return any errors, add simple check before dereference, ignore the fail. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Fix null pointer dereference in pidff_find_fields This function triggered a null pointer dereference if used to search for a report that isn't implemented on the device. This happened both for optional and required reports alike. The same logic was applied to pidff_find_special_field and although pidff_init_fields should return an error earlier if one of the required reports is missing, future modifications could change this logic and resurface this possible null pointer dereference again. LKML bug report: https://lore.kernel.org/all/CAL-gK7f5=R0nrrQdPtaZZr1fd-cdAMbDMuZ_NLA8vM0SX+nGSw@mail.gmail.com

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix null pointer dereference for resetting decoder Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: stm32: check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix NULL pointer access This patch ensures that the UCSI driver waits for all pending tasks in the ucsi_displayport_work workqueue to finish executing before proceeding with the partner removal.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered Russell King reports that a system with mv88e6xxx dereferences a NULL pointer when unbinding this driver: https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/ The crash seems to be in devlink_region_destroy(), which is not NULL tolerant but is given a NULL devlink global region pointer. At least on some chips, some devlink regions are conditionally registered since the blamed commit, see mv88e6xxx_setup_devlink_regions_global(): if (cond && !cond(chip)) continue; These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip does not have an STU or PVT, it should crash like this. To fix the issue, avoid unregistering those regions which are NULL, i.e. were skipped at mv88e6xxx_setup_devlink_regions_global() time.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null ptr dereference in raid10_size() In raid10_run() if raid10_set_queue_limits() succeed, the return value is set to zero, and if following procedures failed raid10_run() will return zero while mddev->private is still NULL, causing null ptr dereference in raid10_size(). Fix the problem by only overwrite the return value if raid10_set_queue_limits() failed.

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Add check for get_zeroed_page() Add check for the return value of get_zeroed_page() in sclp_console_init() to prevent null pointer dereference. Furthermore, to solve the memory leak caused by the loop allocation, add a free helper to do the free job.

In the Linux kernel, the following vulnerability has been resolved: cifs: avoid NULL pointer dereference in dbg call cifs_server_dbg() implies server to be non-NULL so move call under condition to avoid NULL pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference. Add NULL check after cpufreq_cpu_get_raw() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_core: handle NULL result of find_service_by_handle In case of an invalid handle the function find_servive_by_handle returns NULL. So take care of this and avoid a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp() Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a potential NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: nvmem: zynqmp_nvmem: unbreak driver after cleanup Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup") changed the driver to expect the device pointer to be passed as the "context", but in nvmem the context parameter comes from nvmem_config.priv which is never set - Leading to null pointer exceptions when the device is accessed.

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rcv_filter Analogue to commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") we need to check for a missing initialization of ml_priv in the receive path of CAN frames. Since commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") the check for dev->type to be ARPHRD_CAN is not sufficient anymore since bonding or tun netdevices claim to be CAN devices but do not initialize ml_priv accordingly.

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: qcom: Fix kernel panic on skipped partition In the event of a skipped partition (case when the entry name is empty) the kernel panics in the cleanup function as the name entry is NULL. Rework the parser logic by first checking the real partition number and then allocate the space and set the data for the valid partitions. The logic was also fundamentally wrong as with a skipped partition, the parts number returned was incorrect by not decreasing it for the skipped partitions.

In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check for potential null return of kmalloc_array() As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference. Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

In the Linux kernel, the following vulnerability has been resolved: ice: Add check for kzalloc Add the check for the return value of kzalloc in order to avoid NULL pointer dereference. Moreover, use the goto-label to share the clean code.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/pt: Fix crash with stop filters in single-range mode Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch.

In the Linux kernel, the following vulnerability has been resolved: arch/arm64: Fix topology initialization for core scheduling Arm64 systems rely on store_cpu_topology() to call update_siblings_masks() to transfer the toplogy to the various cpu masks. This needs to be done before the call to notify_cpu_starting() which tells the scheduler about each cpu found, otherwise the core scheduling data structures are setup in a way that does not match the actual topology. With smt_mask not setup correctly we bail on `cpumask_weight(smt_mask) == 1` for !leaders in: notify_cpu_starting() cpuhp_invoke_callback_range() sched_cpu_starting() sched_core_cpu_starting() which leads to rq->core not being correctly set for !leader-rq's. Without this change stress-ng (which enables core scheduling in its prctl tests in newer versions -- i.e. with PR_SCHED_CORE support) causes a warning and then a crash (trimmed for legibility): [ 1853.805168] ------------[ cut here ]------------ [ 1853.809784] task_rq(b)->core != rq->core [ 1853.809792] WARNING: CPU: 117 PID: 0 at kernel/sched/fair.c:11102 cfs_prio_less+0x1b4/0x1c4 ... [ 1854.015210] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... [ 1854.231256] Call trace: [ 1854.233689] pick_next_task+0x3dc/0x81c [ 1854.237512] __schedule+0x10c/0x4cc [ 1854.240988] schedule_idle+0x34/0x54

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when uninstalling driver When the driver is uninstalled and the VF is disabled concurrently, a kernel crash occurs. The reason is that the two actions call function pci_disable_sriov(). The num_VFs is checked to determine whether to release the corresponding resources. During the second calling, num_VFs is not 0 and the resource release function is called. However, the corresponding resource has been released during the first invoking. Therefore, the problem occurs: [15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [15278.131557][T50670] Call trace: [15278.134686][T50670] klist_put+0x28/0x12c [15278.138682][T50670] klist_del+0x14/0x20 [15278.142592][T50670] device_del+0xbc/0x3c0 [15278.146676][T50670] pci_remove_bus_device+0x84/0x120 [15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80 [15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c [15278.162485][T50670] sriov_disable+0x50/0x11c [15278.166829][T50670] pci_disable_sriov+0x24/0x30 [15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3] [15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge] [15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230 [15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30 [15278.193848][T50670] invoke_syscall+0x50/0x11c [15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164 [15278.203837][T50670] do_el0_svc+0x34/0xcc [15278.207834][T50670] el0_svc+0x20/0x30 For details, see the following figure. rmmod hclge disable VFs ---------------------------------------------------- hclge_exit() sriov_numvfs_store() ... device_lock() pci_disable_sriov() hns3_pci_sriov_configure() pci_disable_sriov() sriov_disable() sriov_disable() if !num_VFs : if !num_VFs : return; return; sriov_del_vfs() sriov_del_vfs() ... ... klist_put() klist_put() ... ... num_VFs = 0; num_VFs = 0; device_unlock(); In this patch, when driver is removing, we get the device_lock() to protect num_VFs, just like sriov_numvfs_store().

In the Linux kernel, the following vulnerability has been resolved: iommu/omap: Fix regression in probe for NULL pointer dereference Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started triggering a NULL pointer dereference for some omap variants: __iommu_probe_device from probe_iommu_group+0x2c/0x38 probe_iommu_group from bus_for_each_dev+0x74/0xbc bus_for_each_dev from bus_iommu_probe+0x34/0x2e8 bus_iommu_probe from bus_set_iommu+0x80/0xc8 bus_set_iommu from omap_iommu_init+0x88/0xcc omap_iommu_init from do_one_initcall+0x44/0x24 This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV) as noted by Jason Gunthorpe <jgg@ziepe.ca>. Looks like the regression already happened with an earlier commit 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") that changed the function return type and missed converting one place.

In the Linux kernel, the following vulnerability has been resolved: ovl: fix NULL pointer dereference in copy up warning This patch is fixing a NULL pointer dereference to get a recently introduced warning message working.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using dc->clk_mgr [WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Add NULL check in ufshcd_mcq_compl_pending_transfer() Add a NULL check for the returned hwq pointer by ufshcd_mcq_req_to_hwq(). This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix ufshcd_abort_one racing issue").