The is_ashmem_file function in drivers/staging/android/ashmem.c in a certain Qualcomm Innovation Center (QuIC) Android patch for the Linux kernel 3.x mishandles pointer validation within the KGSL Linux Graphics Module, which allows attackers to bypass intended access restrictions by using the /ashmem string as the dentry name.

In the Linux kernel, the following vulnerability has been resolved: net/xen-netback: prevent UAF in xenvif_flush_hash() During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe.

The compat IPT_SO_SET_REPLACE and IP6T_SO_SET_REPLACE setsockopt implementations in the netfilter subsystem in the Linux kernel before 4.6.3 allow local users to gain privileges or cause a denial of service (memory corruption) by leveraging in-container root access to provide a crafted offset value that triggers an unintended decrement.

The get_rock_ridge_filename function in fs/isofs/rock.c in the Linux kernel before 4.5.5 mishandles NM (aka alternate name) entries containing \0 characters, which allows local users to obtain sensitive information from kernel memory or possibly have unspecified other impact via a crafted isofs filesystem.

In the Linux kernel, the following vulnerability has been resolved: leds: trigger: Unregister sysfs attributes before calling deactivate() Triggers which have trigger specific sysfs attributes typically store related data in trigger-data allocated by the activate() callback and freed by the deactivate() callback. Calling device_remove_groups() after calling deactivate() leaves a window where the sysfs attributes show/store functions could be called after deactivation and then operate on the just freed trigger-data. Move the device_remove_groups() call to before deactivate() to close this race window. This also makes the deactivation path properly do things in reverse order of the activation path which calls the activate() callback before calling device_add_groups().

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix buffer overflow when parsing NFS reparse points ReparseDataLength is sum of the InodeType size and DataBuffer size. So to get DataBuffer size it is needed to subtract InodeType's size from ReparseDataLength. Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer at position after the end of the buffer because it does not subtract InodeType size from the length. Fix this problem and correctly subtract variable len. Member InodeType is present only when reparse buffer is large enough. Check for ReparseDataLength before accessing InodeType to prevent another invalid memory access. Major and minor rdev values are present also only when reparse buffer is large enough. Check for reparse buffer size before calling reparse_mkdev().

In the Linux kernel, the following vulnerability has been resolved: fs/buffer: fix use-after-free when call bh_read() helper There's issue as follows: BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110 Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0 CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_address_description.constprop.0+0x2c/0x390 print_report+0xb4/0x270 kasan_report+0xb8/0xf0 end_buffer_read_sync+0xe3/0x110 end_bio_bh_io_sync+0x56/0x80 blk_update_request+0x30a/0x720 scsi_end_request+0x51/0x2b0 scsi_io_completion+0xe3/0x480 ? scsi_device_unbusy+0x11e/0x160 blk_complete_reqs+0x7b/0x90 handle_softirqs+0xef/0x370 irq_exit_rcu+0xa5/0xd0 sysvec_apic_timer_interrupt+0x6e/0x90 </IRQ> Above issue happens when do ntfs3 filesystem mount, issue may happens as follows: mount IRQ ntfs_fill_super read_cache_page do_read_cache_folio filemap_read_folio mpage_read_folio do_mpage_readpage ntfs_get_block_vbo bh_read submit_bh wait_on_buffer(bh); blk_complete_reqs scsi_io_completion scsi_end_request blk_update_request end_bio_bh_io_sync end_buffer_read_sync __end_buffer_read_notouch unlock_buffer wait_on_buffer(bh);--> return will return to caller put_bh --> trigger stack-out-of-bounds In the mpage_read_folio() function, the stack variable 'map_bh' is passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and wait_on_buffer() returns to continue processing, the stack variable is likely to be reclaimed. Consequently, during the end_buffer_read_sync() process, calling put_bh() may result in stack overrun. If the bh is not allocated on the stack, it belongs to a folio. Freeing a buffer head which belongs to a folio is done by drop_buffers() which will fail to free buffers which are still locked. So it is safe to call put_bh() before __end_buffer_read_notouch().

In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix out-of-bounds issue when preparing trampoline image We get the size of the trampoline image during the dry run phase and allocate memory based on that size. The allocated image will then be populated with instructions during the real patch phase. But after commit 26ef208c209a ("bpf: Use arch_bpf_trampoline_size"), the `im` argument is inconsistent in the dry run and real patch phase. This may cause emit_imm in RV64 to generate a different number of instructions when generating the 'im' address, potentially causing out-of-bounds issues. Let's emit the maximum number of instructions for the "im" address during dry run to fix this problem.

arch/x86/kvm/vmx.c in the Linux kernel through 4.6.3 mishandles the APICv on/off state, which allows guest OS users to obtain direct APIC MSR access on the host OS, and consequently cause a denial of service (host OS crash) or possibly execute arbitrary code on the host OS, via x2APIC mode.

drivers/media/v4l2-core/videobuf2-v4l2.c in the Linux kernel before 4.5.3 allows local users to cause a denial of service (kernel memory write operation) or possibly have unspecified other impact via a crafted number of planes in a VIDIOC_DQBUF ioctl call.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt Stanislav reported that in bpf_crypto_crypt() the destination dynptr's size is not validated to be at least as large as the source dynptr's size before calling into the crypto backend with 'len = src_len'. This can result in an OOB write when the destination is smaller than the source. Concretely, in mentioned function, psrc and pdst are both linear buffers fetched from each dynptr: psrc = __bpf_dynptr_data(src, src_len); [...] pdst = __bpf_dynptr_data_rw(dst, dst_len); [...] err = decrypt ? ctx->type->decrypt(ctx->tfm, psrc, pdst, src_len, piv) : ctx->type->encrypt(ctx->tfm, psrc, pdst, src_len, piv); The crypto backend expects pdst to be large enough with a src_len length that can be written. Add an additional src_len > dst_len check and bail out if it's the case. Note that these kfuncs are accessible under root privileges only.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix UAF around queue destruction We currently do stuff like queuing the final destruction step on a random system wq, which will outlive the driver instance. With bad timing we can teardown the driver with one or more work workqueue still being alive leading to various UAF splats. Add a fini step to ensure user queues are properly torn down. At this point GuC should already be nuked so queue itself should no longer be referenced from hw pov. v2 (Matt B) - Looks much safer to use a waitqueue and then just wait for the xa_array to become empty before triggering the drain. (cherry picked from commit 861108666cc0e999cffeab6aff17b662e68774e3)

A vulnerability, which was classified as critical, was found in Linux Kernel. This affects the function __mtk_ppe_check_skb of the file drivers/net/ethernet/mediatek/mtk_ppe.c of the component Ethernet Handler. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211935.

In the Linux kernel, the following vulnerability has been resolved: btrfs: send: fix buffer overflow detection when copying path to cache entry Starting with commit c0247d289e73 ("btrfs: send: annotate struct name_cache_entry with __counted_by()") we annotated the variable length array "name" from the name_cache_entry structure with __counted_by() to improve overflow detection. However that alone was not correct, because the length of that array does not match the "name_len" field - it matches that plus 1 to include the NUL string terminator, so that makes a fortified kernel think there's an overflow and report a splat like this: strcpy: detected buffer overflow: 20 byte write of buffer size 19 WARNING: CPU: 3 PID: 3310 at __fortify_report+0x45/0x50 CPU: 3 UID: 0 PID: 3310 Comm: btrfs Not tainted 6.11.0-prnet #1 Hardware name: CompuLab Ltd. sbc-ihsw/Intense-PC2 (IPC2), BIOS IPC2_3.330.7 X64 03/15/2018 RIP: 0010:__fortify_report+0x45/0x50 Code: 48 8b 34 (...) RSP: 0018:ffff97ebc0d6f650 EFLAGS: 00010246 RAX: 7749924ef60fa600 RBX: ffff8bf5446a521a RCX: 0000000000000027 RDX: 00000000ffffdfff RSI: ffff97ebc0d6f548 RDI: ffff8bf84e7a1cc8 RBP: ffff8bf548574080 R08: ffffffffa8c40e10 R09: 0000000000005ffd R10: 0000000000000004 R11: ffffffffa8c70e10 R12: ffff8bf551eef400 R13: 0000000000000000 R14: 0000000000000013 R15: 00000000000003a8 FS: 00007fae144de8c0(0000) GS:ffff8bf84e780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fae14691690 CR3: 00000001027a2003 CR4: 00000000001706f0 Call Trace: <TASK> ? __warn+0x12a/0x1d0 ? __fortify_report+0x45/0x50 ? report_bug+0x154/0x1c0 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x1a/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? __fortify_report+0x45/0x50 __fortify_panic+0x9/0x10 __get_cur_name_and_parent+0x3bc/0x3c0 get_cur_path+0x207/0x3b0 send_extent_data+0x709/0x10d0 ? find_parent_nodes+0x22df/0x25d0 ? mas_nomem+0x13/0x90 ? mtree_insert_range+0xa5/0x110 ? btrfs_lru_cache_store+0x5f/0x1e0 ? iterate_extent_inodes+0x52d/0x5a0 process_extent+0xa96/0x11a0 ? __pfx_lookup_backref_cache+0x10/0x10 ? __pfx_store_backref_cache+0x10/0x10 ? __pfx_iterate_backrefs+0x10/0x10 ? __pfx_check_extent_item+0x10/0x10 changed_cb+0x6fa/0x930 ? tree_advance+0x362/0x390 ? memcmp_extent_buffer+0xd7/0x160 send_subvol+0xf0a/0x1520 btrfs_ioctl_send+0x106b/0x11d0 ? __pfx___clone_root_cmp_sort+0x10/0x10 _btrfs_ioctl_send+0x1ac/0x240 btrfs_ioctl+0x75b/0x850 __se_sys_ioctl+0xca/0x150 do_syscall_64+0x85/0x160 ? __count_memcg_events+0x69/0x100 ? handle_mm_fault+0x1327/0x15c0 ? __se_sys_rt_sigprocmask+0xf1/0x180 ? syscall_exit_to_user_mode+0x75/0xa0 ? do_syscall_64+0x91/0x160 ? do_user_addr_fault+0x21d/0x630 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fae145eeb4f Code: 00 48 89 (...) RSP: 002b:00007ffdf1cb09b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fae145eeb4f RDX: 00007ffdf1cb0ad0 RSI: 0000000040489426 RDI: 0000000000000004 RBP: 00000000000078fe R08: 00007fae144006c0 R09: 00007ffdf1cb0927 R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffdf1cb1ce8 R13: 0000000000000003 R14: 000055c499fab2e0 R15: 0000000000000004 </TASK> Fix this by not storing the NUL string terminator since we don't actually need it for name cache entries, this way "name_len" corresponds to the actual size of the "name" array. This requires marking the "name" array field with __nonstring and using memcpy() instead of strcpy() as recommended by the guidelines at: https://github.com/KSPP/linux/issues/90

In the Linux kernel, the following vulnerability has been resolved: bna: adjust 'name' buf size of bna_tcb and bna_ccb structures To have enough space to write all possible sprintf() args. Currently 'name' size is 16, but the first '%s' specifier may already need at least 16 characters, since 'bnad->netdev->name' is used there. For '%d' specifiers, assume that they require: * 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8 * 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX is 16 And replace sprintf with snprintf. Detected using the static analysis tool - Svace.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc2991) re-order conditions to fix off by one bug LTC2991_T_INT_CH_NR is 4. The st->temp_en[] array has LTC2991_MAX_CHANNEL (4) elements. Thus if "channel" is equal to LTC2991_T_INT_CH_NR then we have read one element beyond the end of the array. Flip the conditions around so that we check if "channel" is valid before using it as an array index.

In the Linux kernel, the following vulnerability has been resolved: mac802154: Fix potential RCU dereference issue in mac802154_scan_worker In the `mac802154_scan_worker` function, the `scan_req->type` field was accessed after the RCU read-side critical section was unlocked. According to RCU usage rules, this is illegal and can lead to unpredictable behavior, such as accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the `scan_req->type` value is now stored in a local variable `scan_req_type` while still within the RCU read-side critical section. The `scan_req_type` is then used after the RCU lock is released, ensuring that the type value is safely accessed without violating RCU rules.

Integer overflow in the xt_alloc_table_info function in net/netfilter/x_tables.c in the Linux kernel through 4.5.2 on 32-bit platforms allows local users to gain privileges or cause a denial of service (heap memory corruption) via an IPT_SO_SET_REPLACE setsockopt call.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't return OOB skb in manage_oob(). syzbot reported use-after-free in unix_stream_recv_urg(). [0] The scenario is 1. send(MSG_OOB) 2. recv(MSG_OOB) -> The consumed OOB remains in recv queue 3. send(MSG_OOB) 4. recv() -> manage_oob() returns the next skb of the consumed OOB -> This is also OOB, but unix_sk(sk)->oob_skb is not cleared 5. recv(MSG_OOB) -> unix_sk(sk)->oob_skb is used but already freed The recent commit 8594d9b85c07 ("af_unix: Don't call skb_get() for OOB skb.") uncovered the issue. If the OOB skb is consumed and the next skb is peeked in manage_oob(), we still need to check if the skb is OOB. Let's do so by falling back to the following checks in manage_oob() and add the test case in selftest. Note that we need to add a similar check for SIOCATMARK. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959 Read of size 4 at addr ffff8880326abcc4 by task syz-executor178/5235 CPU: 0 UID: 0 PID: 5235 Comm: syz-executor178 Not tainted 6.11.0-rc5-syzkaller-00742-gfbdaffe41adc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959 unix_stream_recv_urg+0x1df/0x320 net/unix/af_unix.c:2640 unix_stream_read_generic+0x2456/0x2520 net/unix/af_unix.c:2778 unix_stream_recvmsg+0x22b/0x2c0 net/unix/af_unix.c:2996 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2816 ___sys_recvmsg net/socket.c:2858 [inline] __sys_recvmsg+0x2f0/0x3e0 net/socket.c:2888 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5360d6b4e9 Code: 48 83 c4 28 c3 e8 37 17 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff29b3a458 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00007fff29b3a638 RCX: 00007f5360d6b4e9 RDX: 0000000000002001 RSI: 0000000020000640 RDI: 0000000000000003 RBP: 00007f5360dde610 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007fff29b3a628 R14: 0000000000000001 R15: 0000000000000001 </TASK> Allocated by task 5235: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4080 __alloc_skb+0x1c3/0x440 net/core/skbuff.c:667 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc3/0x770 net/core/skbuff.c:6528 sock_alloc_send_pskb+0x91a/0xa60 net/core/sock.c:2815 sock_alloc_send_skb include/net/sock.h:1778 [inline] queue_oob+0x108/0x680 net/unix/af_unix.c:2198 unix_stream_sendmsg+0xd24/0xf80 net/unix/af_unix.c:2351 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5235: kasan_save_stack mm/kasan/common.c:47 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use after free in iucv_sock_close() iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when adding pages to compressed bio At add_ra_bio_pages() we are accessing the extent map to calculate 'add_size' after we dropped our reference on the extent map, resulting in a use-after-free. Fix this by computing 'add_size' before dropping our extent map reference.

In the Linux kernel, the following vulnerability has been resolved: fbcon: fix integer overflow in fbcon_do_set_font Fix integer overflow vulnerabilities in fbcon_do_set_font() where font size calculations could overflow when handling user-controlled font parameters. The vulnerabilities occur when: 1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount multiplication with user-controlled values that can overflow. 2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow 3. This results in smaller allocations than expected, leading to buffer overflows during font data copying. Add explicit overflow checking using check_mul_overflow() and check_add_overflow() kernel helpers to safety validate all size calculations before allocation.

In the Linux kernel, the following vulnerability has been resolved: fuse: Block access to folio overlimit syz reported a slab-out-of-bounds Write in fuse_dev_do_write. When the number of bytes to be retrieved is truncated to the upper limit by fc->max_pages and there is an offset, the oob is triggered. Add a loop termination condition to prevent overruns.

An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE On Google gs101, the number of UTP transfer request slots (nutrs) is 32, and in this case the driver ends up programming the UTRL_NEXUS_TYPE incorrectly as 0. This is because the left hand side of the shift is 1, which is of type int, i.e. 31 bits wide. Shifting by more than that width results in undefined behaviour. Fix this by switching to the BIT() macro, which applies correct type casting as required. This ensures the correct value is written to UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift warning: UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21 shift exponent 32 is too large for 32-bit type 'int' For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE write.

kernel/bpf/verifier.c in the Linux kernel through 4.14.8 allows local users to cause a denial of service (memory corruption) or possibly have unspecified other impact by leveraging the lack of stack-pointer alignment enforcement.

The aufs module for the Linux kernel 3.x and 4.x does not properly restrict the mount namespace, which allows local users to gain privileges by mounting an aufs filesystem on top of a FUSE filesystem, and then executing a crafted setuid program.

In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free in vdec_close There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close.

In the Linux kernel, the following vulnerability has been resolved: PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal Keith reports a use-after-free when a DPC event occurs concurrently to hot-removal of the same portion of the hierarchy: The dpc_handler() awaits readiness of the secondary bus below the Downstream Port where the DPC event occurred. To do so, it polls the config space of the first child device on the secondary bus. If that child device is concurrently removed, accesses to its struct pci_dev cause the kernel to oops. That's because pci_bridge_wait_for_secondary_bus() neglects to hold a reference on the child device. Before v6.3, the function was only called on resume from system sleep or on runtime resume. Holding a reference wasn't necessary back then because the pciehp IRQ thread could never run concurrently. (On resume from system sleep, IRQs are not enabled until after the resume_noirq phase. And runtime resume is always awaited before a PCI device is removed.) However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset"), which introduced that, failed to appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a reference on the child device because dpc_handler() and pciehp may indeed run concurrently. The commit was backported to v5.10+ stable kernels, so that's the oldest one affected. Add the missing reference acquisition. Abridged stack trace: BUG: unable to handle page fault for address: 00000000091400c0 CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0 RIP: pci_bus_read_config_dword+0x17/0x50 pci_dev_wait() pci_bridge_wait_for_secondary_bus() dpc_reset_link() pcie_do_recovery() dpc_handler()

In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_genl_connect() error path There is a use-after-free issue in nbd: block nbd6: Receive control failed (result -104) block nbd6: shutting down sockets ================================================================== BUG: KASAN: slab-use-after-free in recv_work+0x694/0xa80 drivers/block/nbd.c:1022 Write of size 4 at addr ffff8880295de478 by task kworker/u33:0/67 CPU: 2 UID: 0 PID: 67 Comm: kworker/u33:0 Not tainted 6.15.0-rc5-syzkaller-00123-g2c89c1b655c0 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: nbd6-recv recv_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_dec include/linux/atomic/atomic-instrumented.h:592 [inline] recv_work+0x694/0xa80 drivers/block/nbd.c:1022 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> nbd_genl_connect() does not properly stop the device on certain error paths after nbd_start_device() has been called. This causes the error path to put nbd->config while recv_work continue to use the config after putting it, leading to use-after-free in recv_work. This patch moves nbd_start_device() after the backend file creation.

In the Linux kernel, the following vulnerability has been resolved: PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port() Within kirin_pcie_parse_port(), the pcie->num_slots is compared to pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead to an overflow. Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move pcie->num_slots increment below the if-statement to avoid out-of-bounds array access. Found by Linux Verification Center (linuxtesting.org) with SVACE. [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: dev/parport: fix the array out-of-bounds risk Fixed array out-of-bounds issues caused by sprintf by replacing it with snprintf for safer data copying, ensuring the destination buffer is not overflowed. Below is the stack trace I encountered during the actual issue: [ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport] [ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm: QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2 [ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp [ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024 [ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace: [ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0 [ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20 [ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c [ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc [ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38 [ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potential use-after-free in oplock/lease break ack If ksmbd_iov_pin_rsp return error, use-after-free can happen by accessing opinfo->state and opinfo_put and ksmbd_fd_put could called twice.

A use-after-free flaw was found in the Linux kernel’s SGI GRU driver in the way the first gru_file_unlocked_ioctl function is called by the user, where a fail pass occurs in the gru_check_chiplet_assignment function. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix use-after-free in page_pool_recycle_in_ring syzbot reported a uaf in page_pool_recycle_in_ring: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943 CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline] _raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline] page_pool_recycle_in_ring net/core/page_pool.c:707 [inline] page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826 page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline] page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline] napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036 skb_pp_recycle net/core/skbuff.c:1047 [inline] skb_free_head net/core/skbuff.c:1094 [inline] skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb net/core/skbuff.c:1204 [inline] sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242 kfree_skb_reason include/linux/skbuff.h:1263 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3343 [inline] root cause is: page_pool_recycle_in_ring ptr_ring_produce spin_lock(&r->producer_lock); WRITE_ONCE(r->queue[r->producer++], ptr) //recycle last page to pool page_pool_release page_pool_scrub page_pool_empty_ring ptr_ring_consume page_pool_return_page //release all page __page_pool_destroy free_percpu(pool->recycle_stats); free(pool) //free spin_unlock(&r->producer_lock); //pool->ring uaf read recycle_stat_inc(pool, ring); page_pool can be free while page pool recycle the last page in ring. Add producer-lock barrier to page_pool_release to prevent the page pool from being free before all pages have been recycled. recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not enabled, which will trigger Wempty-body build warning. Add definition for pool stat macro to fix warning.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 strlen+0x93/0xa0 lib/string.c:420 __fortify_strlen include/linux/fortify-string.h:268 [inline] get_kobj_path_length lib/kobject.c:118 [inline] kobject_get_path+0x3f/0x2a0 lib/kobject.c:158 kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545 ib_register_device drivers/infiniband/core/device.c:1472 [inline] ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393 rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552 rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225 nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796 rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmsg+0x16d/0x220 net/socket.c:2652 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This problem is similar to the problem that the commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name") fixes. The root cause is: the function ib_device_rename() renames the name with lock. But in the function kobject_uevent(), this name is accessed without lock protection at the same time. The solution is to add the lock protection when this name is accessed in the function kobject_uevent().

In the Linux kernel, the following vulnerability has been resolved: erofs: avoid using multiple devices with different type For multiple devices, both primary and extra devices should be the same type. `erofs_init_device` has already guaranteed that if the primary is a file-backed device, extra devices should also be regular files. However, if the primary is a block device while the extra device is a file-backed device, `erofs_init_device` will get an ENOTBLK, which is not treated as an error in `erofs_fc_get_tree`, and that leads to an UAF: erofs_fc_get_tree get_tree_bdev_flags(erofs_fc_fill_super) erofs_read_superblock erofs_init_device // sbi->dif0 is not inited yet, // return -ENOTBLK deactivate_locked_super free(sbi) if (err is -ENOTBLK) sbi->dif0.file = filp_open() // sbi UAF So if -ENOTBLK is hitted in `erofs_init_device`, it means the primary device must be a block device, and the extra device is not a block device. The error can be converted to -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: net_sched: qfq: Fix double list add in class with netem as child qdisc As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of qfq, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. This patch checks whether the class was already added to the agg->active list (cl_is_active) before doing the addition to cater for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Abort software beacon handling if disabled A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix dangling pointer in krb_authenticate krb_authenticate frees sess->user and does not set the pointer to NULL. It calls ksmbd_krb5_authenticate to reinitialise sess->user but that function may return without doing so. If that happens then smb2_sess_setup, which calls krb_authenticate, will be accessing free'd memory when it later uses sess->user.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix memory corruption when FW resources change during ifdown bnxt_set_dflt_rings() assumes that it is always called before any TC has been created. So it doesn't take bp->num_tc into account and assumes that it is always 0 or 1. In the FW resource or capability change scenario, the FW will return flags in bnxt_hwrm_if_change() that will cause the driver to reinitialize and call bnxt_cancel_reservations(). This will lead to bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc may be greater than 1. This will cause bp->tx_ring[] to be sized too small and cause memory corruption in bnxt_alloc_cp_rings(). Fix it by properly scaling the TX rings by bp->num_tc in the code paths mentioned above. Add 2 helper functions to determine bp->tx_nr_rings and bp->tx_nr_rings_per_tc.

The ecryptfs_privileged_open function in fs/ecryptfs/kthread.c in the Linux kernel before 4.6.3 allows local users to gain privileges or cause a denial of service (stack memory consumption) via vectors involving crafted mmap calls for /proc pathnames, leading to recursive pagefault handling.

Stack-based buffer overflow in the supply_lm_input_write function in drivers/thermal/supply_lm_core.c in the MSM Thermal driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted application that sends a large amount of data through the debugfs interface.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix isochronous Ring Underrun/Overrun event handling The TRB pointer of these events points at enqueue at the time of error occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we are handling the event, a new TD may be queued at this ring position. I can trigger this race by rising interrupt moderation to increase IRQ handling delay. Similar delay may occur naturally due to system load. If this ever happens after a Missed Service Error, missed TDs will be skipped and the new TD processed as if it matched the event. It could be given back prematurely, risking data loss or buffer UAF by the xHC. Don't complete TDs on xrun events and don't warn if queued TDs don't match the event's TRB pointer, which can be NULL or a link/no-op TRB. Don't warn if there are no queued TDs at all. Now that it's safe, also handle xrun events if the skip flag is clear. This ensures completion of any TD stuck in 'error mid TD' state right before the xrun event, which could happen if a driver submits a finite number of URBs to a buggy HC and then an error occurs on the last TD.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an out-of-bounds read may lead to denial of service, information disclosure, or data tampering.

In the Linux kernel, the following vulnerability has been resolved: mISDN: Fix a use after free in hfcmulti_tx() Don't dereference *sp after calling dev_kfree_skb(*sp).

In the Linux kernel, the following vulnerability has been resolved: ext4: use memtostr_pad() for s_volume_name As with the other strings in struct ext4_super_block, s_volume_name is not NUL terminated. The other strings were marked in commit 072ebb3bffe6 ("ext4: add nonstring annotations to ext4.h"). Using strscpy() isn't the right replacement for strncpy(); it should use memtostr_pad() instead.

In the Linux kernel, the following vulnerability has been resolved: tipc: Return non-zero value from tipc_udp_addr2str() on error tipc_udp_addr2str() should return non-zero value if the UDP media address is invalid. Otherwise, a buffer overflow access can occur in tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP media address.