A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.

A vulnerability was found in Linux Kernel. It has been rated as problematic. This issue affects some unknown processing of the file fs/fscache/cookie.c of the component IPsec. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211931.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix zerocopy completion for multi-skb sends When a large message is fragmented into multiple skbs, the zerocopy uarg is only allocated and attached to the last skb in the loop. Non-final skbs carry pinned user pages with no completion tracking, so the kernel has no way to notify userspace when those pages are safe to reuse. If the loop breaks early the uarg is never allocated at all, leaking pinned pages with no completion notification. Fix this by following the approach used by TCP: allocate the zerocopy uarg (if not provided by the caller) before the send loop and attach it to every skb via skb_zcopy_set(), which takes a reference per skb. Each skb's completion properly decrements the refcount, and the notification only fires after the last skb is freed. On failure, if no data was sent, the uarg is cleanly aborted via net_zcopy_put_abort(). This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting") but was pre-existing.

In the Linux kernel, the following vulnerability has been resolved: drm/colorop: Fix blob property reference tracking in state lifecycle The colorop state blob property handling had memory leaks during state duplication, destruction, and reset operations. The implementation failed to follow the established pattern from drm_crtc's handling of DEGAMMA/GAMMA blob properties. Issues fixed: - drm_colorop_atomic_destroy_state() was freeing state memory without releasing the blob reference, causing a leak - drm_colorop_reset() was directly freeing old state with kfree() instead of properly destroying it, leaking blob references - drm_colorop_cleanup() had duplicate blob cleanup code Changes: - Add __drm_atomic_helper_colorop_destroy_state() helper to properly release blob references before freeing state memory - Update drm_colorop_atomic_destroy_state() to call the helper - Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state() for proper cleanup of old state - Simplify drm_colorop_cleanup() to use the common destruction path This matches the well-tested pattern used by drm_crtc since 2016 and ensures proper reference counting throughout the state lifecycle. Co-developed by Claude Sonnet 4.5.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix memory leak in error path of hci_alloc_dev() Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device.

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register NFT_META_BRI_IIFHWADDR declares its destination register with len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and leaving the upper 2 bytes of the second register as uninitialised nft_do_chain() stack. A downstream load of that register span leaks those stale bytes to userspace. Zero the second register before the memcpy so the full declared span is written.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leaks in beacon template setup The functions ath11k_mac_setup_bcn_tmpl_ema() and ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates but fail to free it when parameter setup returns an error. Since beacon templates must be released during normal execution, they must also be released in the error handling paths to prevent memory leaks. Fix this by using unified exit paths with proper cleanup in the respective error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix sk_ack_backlog leak on failed handshake When vmci_transport_recv_connecting_server() returns an error, vmci_transport_recv_listen() calls vsock_remove_pending() but never calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented permanently. Repeated handshake failures (malformed packets, queue pair alloc failure, event subscribe failure) cause sk_ack_backlog to climb toward sk_max_ack_backlog. Once it reaches the limit the listener permanently refuses all new connections with -ECONNREFUSED, a silent denial of service requiring a process restart to recover. The two existing sk_acceptq_removed() calls in af_vsock.c do not cover this path: line 764 checks vsock_is_pending() which returns false after vsock_remove_pending(), and line 1889 is only reached on successful accept(). Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on the error path.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix possible kfree_skb of ERR_PTR After the patch in the "Fixes" tag, the allocation of the "reply" skb can happen either before or after locking the ovs_mutex. However, error cleanups still follow the classical reversed order, assuming "reply" is allocated before locking: it is freed after unlocking. If "reply" allocation happens after locking the mutex and it fails, "reply" is left with an ERR_PTR, and execution jumps to the correspondent cleanup stage which will try to free an invalid pointer. Fix this by setting the pointer to NULL after having saved its error value.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect buffer and the workgroup buffer and is expected to release them before returning. When any of the workgroup counts read from the buffer is zero, the function bailed out early and skipped the cleanup, leaking the vaddr mappings of both BOs. Jump to the cleanup path instead of returning directly, so the mappings are always dropped.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw: dmamux: fix OF node leak on route allocation failure Make sure to drop the reference taken to the DMA master OF node also on late route allocation failures.

In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: fix generic IRQ chip leak on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe. However, on driver remove/teardown, the generic chips are not automatically freed when the IRQ domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global gc_list and may later be visited by generic IRQ chip suspend, resume, or shutdown callbacks after the GPIO bank has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by explicitly calling irq_domain_remove_generic_chips() before removing the IRQ domain in rockchip_gpio_remove().

In the Linux kernel, the following vulnerability has been resolved: misc: ti_fpc202: fix a potential memory leak in probe function Use for_each_child_of_node_scoped() to simplify the code and ensure the device node reference is automatically released when the loop scope ends.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: fix device leak on probe failure Make sure to drop the reference taken when looking up the ICU device during probe also on probe failures (e.g. probe deferral).

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: fix resource freeing order Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable events") added a call to ptp_disable_all_events() which changes the configuration of pins if they support EXTTS events. In ptp_ocp_detach() pins resources are freed before ptp_clock_unregister() and it leads to use-after-free during driver removal. Fix it by changing the order of free/unregister calls. To avoid irq handler running on the other core while ptp device unregistering, call synchronize_irq() after HW is configured to stop producing irqs and no irqs are in-flight.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: fix krealloc() memory leak Don't just overwrite the original pointer passed to krealloc() with its return value without checking latter: MEM = krealloc(MEM, SZ, GFP); If krealloc() returns NULL, that erases the pointer to the still allocated memory, hence leaks this memory. Instead, use a temporary variable, check it's not NULL and only then assign it to the original pointer: TMP = krealloc(MEM, SZ, GFP); if (!TMP) return; MEM = TMP; While on it, use krealloc_array().

In the Linux kernel, the following vulnerability has been resolved: wifi: fix leak if split 6 GHz scanning fails rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's supposed to be released at ___cfg80211_scan_done() but this doesn't happen as rdev->scan_req is NULL at that point, too, leading to the early return from the freeing function. unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0 Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: bpf: Do not allow deleting local storage in NMI Currently, local storage may deadlock when deferring freeing selem or local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace() in NMI or reentrant. Since deleting selem in NMI is an unlikely use case, partially mitigate it by returning error when calling from bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible to deadlock through reentrant. A full mitigation requires returning error when irqs_disabled() is true, which, however is too heavy-handed for bpf_xxx_storage_delete(). The long-term solution requires _nolock versions of call_rcu. Another possible solution is to defer the free through irq_work [0], but it would grow the size of selem, which is non-ideal. The check is only needed in bpf_selem_unlink(), which is used by helpers and syscalls. bpf_selem_unlink_nofail() is fine as it is called during map and owner tear down that never run in NMI or reentrant. [0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let's fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576

In the Linux kernel, the following vulnerability has been resolved: block: fix zones_cond memory leak on zone revalidation error paths When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources() has allocated args.zones_cond, the memory is leaked because no error path frees it.

In the Linux kernel, the following vulnerability has been resolved: tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY skbs. We can reproduce the problem with these sequences: sk = socket(AF_INET, SOCK_DGRAM, 0) sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE) sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1) sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53)) sk.close() sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets skb->cb->ubuf.refcnt to 1, and calls sock_hold(). Here, struct ubuf_info_msgzc indirectly holds a refcnt of the socket. When the skb is sent, __skb_tstamp_tx() clones it and puts the clone into the socket's error queue with the TX timestamp. When the original skb is received locally, skb_copy_ubufs() calls skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt. This additional count is decremented while freeing the skb, but struct ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is not called. The last refcnt is not released unless we retrieve the TX timestamped skb by recvmsg(). Since we clear the error queue in inet_sock_destruct() after the socket's refcnt reaches 0, there is a circular dependency. If we close() the socket holding such skbs, we never call sock_put() and leak the count, sk, and skb. TCP has the same problem, and commit e0c8bccd40fc ("net: stream: purge sk_error_queue in sk_stream_kill_queues()") tried to fix it by calling skb_queue_purge() during close(). However, there is a small chance that skb queued in a qdisc or device could be put into the error queue after the skb_queue_purge() call. In __skb_tstamp_tx(), the cloned skb should not have a reference to the ubuf to remove the circular dependency, but skb_clone() does not call skb_copy_ubufs() for zerocopy skb. So, we need to call skb_orphan_frags_rx() for the cloned skb to call skb_copy_ubufs(). [0]: BUG: memory leak unreferenced object 0xffff88800c6d2d00 (size 1152): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 cd af e8 81 00 00 00 00 ................ 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<0000000055636812>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:2024 [<0000000054d77b7a>] sk_alloc+0x3b/0x800 net/core/sock.c:2083 [<0000000066f3c7e0>] inet_create net/ipv4/af_inet.c:319 [inline] [<0000000066f3c7e0>] inet_create+0x31e/0xe40 net/ipv4/af_inet.c:245 [<000000009b83af97>] __sock_create+0x2ab/0x550 net/socket.c:1515 [<00000000b9b11231>] sock_create net/socket.c:1566 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1603 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1588 [inline] [<00000000b9b11231>] __sys_socket+0x138/0x250 net/socket.c:1636 [<000000004fb45142>] __do_sys_socket net/socket.c:1649 [inline] [<000000004fb45142>] __se_sys_socket net/socket.c:1647 [inline] [<000000004fb45142>] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd BUG: memory leak unreferenced object 0xffff888017633a00 (size 240): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 2d 6d 0c 80 88 ff ff .........-m..... backtrace: [<000000002b1c4368>] __alloc_skb+0x229/0x320 net/core/skbuff.c:497 [<00000000143579a6>] alloc_skb include/linux/skbuff.h:1265 [inline] [<00000000143579a6>] sock_omalloc+0xaa/0x190 net/core/sock.c:2596 [<00000000be626478>] msg_zerocopy_alloc net/core/skbuff.c:1294 [inline] [<00000000be626478>] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant.

In the Linux kernel, the following vulnerability has been resolved: i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers() The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup attribute to automatically free the memory when the variable goes out of scope.

In the Linux kernel, the following vulnerability has been resolved: via_wdt: fix critical boot hang due to unnamed resource allocation The VIA watchdog driver uses allocate_resource() to reserve a MMIO region for the watchdog control register. However, the allocated resource was not given a name, which causes the kernel resource tree to contain an entry marked as "<BAD>" under /proc/iomem on x86 platforms. During boot, this unnamed resource can lead to a critical hang because subsequent resource lookups and conflict checks fail to handle the invalid entry properly.

In the Linux kernel, the following vulnerability has been resolved: nfc: fix memory leak of se_io context in nfc_genl_se_io The callback context for sending/receiving APDUs to/from the selected secure element is allocated inside nfc_genl_se_io and supposed to be eventually freed in se_io_cb callback function. However, there are several error paths where the bwi_timer is not charged to call se_io_cb later, and the cb_context is leaked. The patch proposes to free the cb_context explicitly on those error paths. At the moment we can't simply check 'dev->ops->se_io()' return value as it may be negative in both cases: when the timer was charged and was not.

In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: sai: fix OF node leak on probe The reference taken to the sync provider OF node when probing the platform device is currently only dropped if the set_sync() callback fails during DAI probe. Make sure to drop the reference on platform probe failures (e.g. probe deferral) and on driver unbind. This also avoids a potential use-after-free in case the DAI is ever reprobed without first rebinding the platform driver.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: fix leaked ct in error paths There are some situations where ct might be leaked as error paths are skipping the refcounted check and return immediately. In order to solve it make sure that the check is always called.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix memory leak in get_file_all_info() In get_file_all_info(), if vfs_getattr() fails, the function returns immediately without freeing the allocated filename, leading to a memory leak. Fix this by freeing the filename before returning in this error case.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation Make sure to drop the reference taken when looking up the crossbar platform device during am335x route allocation.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: lpc18xx-dmamux: fix device leak on route allocation Make sure to drop the reference taken when looking up the DMA mux platform device during route allocation. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference.

In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix memory leak on usb_submit_urb() failure In async_set_registers(), when usb_submit_urb() fails, the allocated async_req structure and URB are not freed, causing a memory leak. The completion callback async_set_reg_cb() is responsible for freeing these allocations, but it is only called after the URB is successfully submitted and completes (successfully or with error). If submission fails, the callback never runs and the memory is leaked. Fix this by freeing both the URB and the request structure in the error path when usb_submit_urb() fails.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: stm32: dmamux: fix device leak on route allocation Make sure to drop the reference taken when looking up the DMA mux platform device during route allocation. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reservation leak in some error paths when inserting inline extent If we fail to allocate a path or join a transaction, we return from __cow_file_range_inline() without freeing the reserved qgroup data, resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data() in such cases.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix device leaks on compat bind and unbind Make sure to drop the reference taken when looking up the idxd device as part of the compat bind and unbind sysfs interface.

In the Linux kernel, the following vulnerability has been resolved: net: hamradio: fix memory leak in mkiss_close My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

In the Linux kernel, the following vulnerability has been resolved: virtiofs: fix memory leak in virtio_fs_probe() When accidentally passing twice the same tag to qemu, kmemleak ended up reporting a memory leak in virtiofs. Also, looking at the log I saw the following error (that's when I realised the duplicated tag): virtiofs: probe of virtio5 failed with error -17 Here's the kmemleak log for reference: unreferenced object 0xffff888103d47800 (size 1024): comm "systemd-udevd", pid 118, jiffies 4294893780 (age 18.340s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 80 90 02 a0 ff ff ff ff ................ backtrace: [<000000000ebb87c1>] virtio_fs_probe+0x171/0x7ae [virtiofs] [<00000000f8aca419>] virtio_dev_probe+0x15f/0x210 [<000000004d6baf3c>] really_probe+0xea/0x430 [<00000000a6ceeac8>] device_driver_attach+0xa8/0xb0 [<00000000196f47a7>] __driver_attach+0x98/0x140 [<000000000b20601d>] bus_for_each_dev+0x7b/0xc0 [<00000000399c7b7f>] bus_add_driver+0x11b/0x1f0 [<0000000032b09ba7>] driver_register+0x8f/0xe0 [<00000000cdd55998>] 0xffffffffa002c013 [<000000000ea196a2>] do_one_initcall+0x64/0x2e0 [<0000000008f727ce>] do_init_module+0x5c/0x260 [<000000003cdedab6>] __do_sys_finit_module+0xb5/0x120 [<00000000ad2f48c6>] do_syscall_64+0x33/0x40 [<00000000809526b5>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix leaking free_bds While reclaiming the tx queue we fast forward the write pointer to drop any data in flight. These dropped frames are not added back to the pool of free bds. We also need to tell the netdev that we are dropping said data.

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leaks on common probe Make sure to drop the reference taken when looking up the SMI device during common probe on late probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix tx skb dma unmap The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries

In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller. Switch to using device_add() instead of device_register() to handle the split initialization.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

In the Linux kernel, the following vulnerability has been resolved: tee: shm: fix shm leak in register_shm_helper() register_shm_helper() allocates shm before calling iov_iter_npages(). If iov_iter_npages() returns 0, the function jumps to err_ctx_put and leaks shm. This can be triggered by TEE_IOC_SHM_REGISTER with struct tee_ioctl_shm_register_data where length is 0. Jump to err_free_shm instead.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate() hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but returns 0 without freeing it when neither pa_sync_term nor big_sync_term flags are set after evaluating the PA and BIG sync connection state. This early-return path was introduced when hci_le_big_terminate() was refactored to take struct hci_conn instead of raw u8 parameters, adding PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue failure does not cover this path.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix nvkm_device leak on aperture removal failure When aperture_remove_conflicting_pci_devices() fails during probe, the error path returns directly without unwinding the nvkm_device that was just allocated by nvkm_device_pci_new(). This leaks both the device wrapper and the pci_enable_device() reference taken inside it. Jump to the existing fail_nvkm label so nvkm_device_del() runs and balances both. The leak was introduced when the intermediate nvkm_device_del() between detection and aperture removal was dropped in favor of creating the pci device once.

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix slicing memory leak The temporary buffer storing slicing configuration data from user is only freed on error. This is a memory leak. Free the buffer unconditionally.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Fix SKB corruption in REO destination ring While running traffics for a long time, randomly an RX descriptor filled with value "0" from REO destination ring is received. This descriptor which is invalid causes the wrong SKB (SKB stored in the IDR lookup with buffer id "0") to be fetched which in turn causes SKB memory corruption issue and the same leads to crash after some time. Changed the start id for idr allocation to "1" and the buffer id "0" is reserved for error validation. Introduced Sanity check to validate the descriptor, before processing the SKB. Crash Signature : Unable to handle kernel paging request at virtual address 3f004900 PC points to "b15_dma_inv_range+0x30/0x50" LR points to "dma_cache_maint_page+0x8c/0x128". The Backtrace obtained is as follows: [<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128) [<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc) [<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k]) [<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k]) [<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci]) [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8) [<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280) [<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280) [<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4) [<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4) [<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90) [<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: dm cache metadata: fix memory leak on metadata abort retry When failing to acquire the root_lock in dm_cache_metadata_abort because the block_manager is read-only, the temporary block_manager created outside the root_lock is not properly released, causing a memory leak. Reproduce steps: This can be reproduced by reloading a new table while the metadata is read-only. While the second call to dm_cache_metadata_abort is caused by lack of support for table preload in dm-cache, mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), it exposes the memory leak in dm_cache_metadata_abort when the function is called multiple times. Specifically, dm-cache fails to sync the new cache object's mode during preresume, creating the reproducer condition. This issue could also occur through concurrent metadata_operation_failed calls due to races in cache mode updates, but the table preload scenario below provides a reliable reproducer. 1. Create a cache device with some faulty trailing metadata blocks dmsetup create cmeta <<EOF 0 200 linear /dev/sdc 0 200 7992 error EOF dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0" 2. Suspend and resume the cache to start a new metadata transaction and trigger metadata io errors on the next metadata commit. dmsetup suspend cache dmsetup resume cache 3. Write to the cache device to update metadata fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \ --randrepeat=0 --direct=1 --size 64k 4. Preload the same table dmsetup reload cache --table "$(dmsetup table cache)" 5. Resume the new table. This triggers the memory leak. dmsetup suspend cache dmsetup resume cache kmemleak logs: <snip> unreferenced object 0xffff8880080c2010 (size 16): comm "dmsetup", pid 132, jiffies 4294982580 hex dump (first 16 bytes): 00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ... backtrace (crc 3118f31c): kmemleak_alloc+0x28/0x40 __kmalloc_cache_noprof+0x3d9/0x510 dm_block_manager_create+0x51/0x140 dm_cache_metadata_abort+0x85/0x320 metadata_operation_failed+0x103/0x1e0 cache_preresume+0xacd/0xe70 dm_table_resume_targets+0xd3/0x320 __dm_resume+0x1b/0xf0 dm_resume+0x127/0x170 <snip>

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix vport QoS cleanup on error When enabling vport QoS fails, the scheduling node was never freed, causing a leak. Add the missing free and reset the vport scheduling node pointer to NULL.