In the Linux kernel, the following vulnerability has been resolved: soc: qcom: socinfo: Avoid out of bounds read of serial number On MSM8916 devices, the serial number exposed in sysfs is constant and does not change across individual devices. It's always: db410c:/sys/devices/soc0$ cat serial_number 2644893864 The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not have support for the serial_num field in the socinfo struct. There is an existing check to avoid exposing the serial number in that case, but it's not correct: When checking the item_size returned by SMEM, we need to make sure the *end* of the serial_num is within bounds, instead of comparing with the *start* offset. The serial_number currently exposed on MSM8916 devices is just an out of bounds read of whatever comes after the socinfo struct in SMEM. Fix this by changing offsetof() to offsetofend(), so that the size of the field is also taken into account.

In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.

In the Linux kernel, the following vulnerability has been resolved: jffs2: prevent xattr node from overflowing the eraseblock Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker. Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as: jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead This breaks the filesystem and can lead to KASAN crashes such as: BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: software node: Correct a OOB check in software_node_get_reference_args() software_node_get_reference_args() wants to get @index-th element, so the property value requires at least '(index + 1) * sizeof(*ref)' bytes but that can not be guaranteed by current OOB check, and may cause OOB for malformed property. Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.

In the Linux kernel, the following vulnerability has been resolved: riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode When CONFIG_FRAME_POINTER is unset, the stack unwinding function walk_stackframe randomly reads the stack and then, when KASAN is enabled, it can lead to the following backtrace: [ 0.000000] ================================================================== [ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a [ 0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0 [ 0.000000] [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36 [ 0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8 [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8 [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84 [ 0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6 [ 0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76 [ 0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e [ 0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52 [ 0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84 [ 0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6 [ 0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20 [ 0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e [ 0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a [ 0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c [ 0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e [ 0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe [ 0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca [ 0.000000] [ 0.000000] The buggy address belongs to stack of task swapper/0 [ 0.000000] and is located at offset 0 in frame: [ 0.000000] stack_trace_save+0x0/0xa6 [ 0.000000] [ 0.000000] This frame has 1 object: [ 0.000000] [32, 56) 'c' [ 0.000000] [ 0.000000] The buggy address belongs to the physical page: [ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07 [ 0.000000] flags: 0x1000(reserved|zone=0) [ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000 [ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff [ 0.000000] page dumped because: kasan: bad access detected [ 0.000000] [ 0.000000] Memory state around the buggy address: [ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3 [ 0.000000] ^ [ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ================================================================== Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise mode.

In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr() Here is a BUG report from syzbot: BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632 Call Trace: ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 vfs_listxattr fs/xattr.c:457 [inline] listxattr+0x293/0x2d0 fs/xattr.c:804 Fix the logic of ea_all iteration. When the ea->name_len is 0, return immediately, or Add2Ptr() would visit invalid memory in the next loop. [almaz.alexandrovich@paragon-software.com: lines of the patch have changed]

In the Linux kernel, the following vulnerability has been resolved: net: ena: fix shift-out-of-bounds in exponential backoff The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future.

In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Fix user-memory-access bug in uclogic_params_ugee_v2_init_event_hooks() When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix out-of-bounds access to the dirty bitset when resizing dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented.

In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: check slab-out-of-bounds in md_bitmap_get_counter If we write a large number to md/bitmap_set_bits, md_bitmap_checkpage() will return -EINVAL because 'page >= bitmap->pages', but the return value was not checked immediately in md_bitmap_get_counter() in order to set *blocks value and slab-out-of-bounds occurs. Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() and return directly if true.

In the Linux kernel, the following vulnerability has been resolved: soundwire: qcom: fix storing port config out-of-bounds The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14), however we index it starting from 1, not 0, to match real port numbers. This can lead to writing port config past 'pconfig' bounds and overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by smatch: drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix struct pid leaks in OOB support syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180 [<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe() The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM. In the for loop, 'i' is used as the index for array 'priv->ports[]' with a check (i > INNO_PHY_PORT_NUM) which indicates that INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop. This > comparison needs to be changed to >=, otherwise it potentially leads to an out of bounds write on the next iteration through the loop

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue.

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one Eric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer. BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0 Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371 [..] Fix this by increasing the stack buffer to also include room for the extra sequence numbers and all the known dccp packet type headers, then pull again after the initial validation of the basic header. While at it, mark packets invalid that lack 48bit sequence bit but where RFC says the type MUST use them. Compile tested only. v2: first skb_header_pointer() now needs to adjust the size to only pull the generic header. (Eric) Heads-up: I intend to remove dccp conntrack support later this year.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value.

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers.

In the Linux kernel, the following vulnerability has been resolved: s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl().

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to wait on block writeback for post_read case If inode is compressed, but not encrypted, it missed to call f2fs_wait_on_block_writeback() to wait for GCed page writeback in IPU write path. Thread A GC-Thread - f2fs_gc - do_garbage_collect - gc_data_segment - move_data_block - f2fs_submit_page_write migrate normal cluster's block via meta_inode's page cache - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_submit_page_bio IRQ - f2fs_read_end_io IRQ old data overrides new data due to out-of-order GC and common IO. - f2fs_read_end_io

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()` When enabling UBSAN on Raspberry Pi 5, we get the following warning: [ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3 [ 387.903868] index 7 is out of range for type '__u32 [7]' [ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151 [ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched] [ 387.932525] Call trace: [ 387.935296] dump_backtrace+0x170/0x1b8 [ 387.939403] show_stack+0x20/0x38 [ 387.942907] dump_stack_lvl+0x90/0xd0 [ 387.946785] dump_stack+0x18/0x28 [ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0 [ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d] [ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ 387.966862] process_one_work+0x62c/0xb48 [ 387.971296] worker_thread+0x468/0x5b0 [ 387.975317] kthread+0x1c4/0x1e0 [ 387.978818] ret_from_fork+0x10/0x20 [ 387.983014] ---[ end trace ]--- This happens because the UAPI provides only seven configuration registers and we are reading the eighth position of this u32 array. Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by accessing only seven positions on the '__u32 [7]' array. The eighth register exists indeed on V3D 7.1, but it isn't currently used. That being so, let's guarantee that it remains unused and add a note that it could be set in a future patch.

An issue was discovered in the Linux kernel 3.16 through 5.5.6. set_fdc in drivers/block/floppy.c leads to a wait_til_ready out-of-bounds read because the FDC index is not checked for errors before assigning it, aka CID-2e90ca68b0d2.

In the Linux kernel, the following vulnerability has been resolved: media: pci: ivtv: Add check for DMA map result In case DMA fails, 'dma->SG_length' is 0. This value is later used to access 'dma->SGarray[dma->SG_length - 1]', which will cause out of bounds access. Add check to return early on invalid value. Adjust warnings accordingly. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all() There's issue as follows: BUG: KASAN: use-after-free in ext4_xattr_inode_dec_ref_all+0x6ff/0x790 Read of size 4 at addr ffff88807b003000 by task syz-executor.0/15172 CPU: 3 PID: 15172 Comm: syz-executor.0 Call Trace: __dump_stack lib/dump_stack.c:82 [inline] dump_stack+0xbe/0xfd lib/dump_stack.c:123 print_address_description.constprop.0+0x1e/0x280 mm/kasan/report.c:400 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560 kasan_report+0x3a/0x50 mm/kasan/report.c:585 ext4_xattr_inode_dec_ref_all+0x6ff/0x790 fs/ext4/xattr.c:1137 ext4_xattr_delete_inode+0x4c7/0xda0 fs/ext4/xattr.c:2896 ext4_evict_inode+0xb3b/0x1670 fs/ext4/inode.c:323 evict+0x39f/0x880 fs/inode.c:622 iput_final fs/inode.c:1746 [inline] iput fs/inode.c:1772 [inline] iput+0x525/0x6c0 fs/inode.c:1758 ext4_orphan_cleanup fs/ext4/super.c:3298 [inline] ext4_fill_super+0x8c57/0xba40 fs/ext4/super.c:5300 mount_bdev+0x355/0x410 fs/super.c:1446 legacy_get_tree+0xfe/0x220 fs/fs_context.c:611 vfs_get_tree+0x8d/0x2f0 fs/super.c:1576 do_new_mount fs/namespace.c:2983 [inline] path_mount+0x119a/0x1ad0 fs/namespace.c:3316 do_mount+0xfc/0x110 fs/namespace.c:3329 __do_sys_mount fs/namespace.c:3540 [inline] __se_sys_mount+0x219/0x2e0 fs/namespace.c:3514 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Memory state around the buggy address: ffff88807b002f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88807b002f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88807b003000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88807b003080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88807b003100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Above issue happens as ext4_xattr_delete_inode() isn't check xattr is valid if xattr is in inode. To solve above issue call xattr_check_inode() check if xattr if valid in inode. In fact, we can directly verify in ext4_iget_extra_inode(), so that there is no divergent verification.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate l_tree_depth to avoid out-of-bounds access The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is limited to OCFS2_MAX_PATH_DEPTH. Add a check to prevent out-of-bounds access if l_tree_depth has an invalid value, which may occur when reading from a corrupted mounted disk [1].

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: <TASK> dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan() KASAN reported following issue: BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt] Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387 Tainted: [U]=USER Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: <TASK> dump_stack_lvl+0x6c/0x90 print_report+0xd1/0x630 kasan_report+0xdb/0x110 __asan_report_load4_noabort+0x14/0x20 tb_retimer_scan+0xffe/0x1550 [thunderbolt] tb_scan_port+0xa6f/0x2060 [thunderbolt] tb_handle_hotplug+0x17b1/0x3080 [thunderbolt] process_one_work+0x626/0x1100 worker_thread+0x6c8/0xfa0 kthread+0x2c8/0x3a0 ret_from_fork+0x3a/0x80 ret_from_fork_asm+0x1a/0x30 This happens because the loop variable still gets incremented by one so max becomes 3 instead of 2, and this makes the second loop read past the the array declared on the stack. Fix this by assigning to max directly in the loop body.

In the Linux kernel, the following vulnerability has been resolved: ipmr: do not call mr_mfc_uses_dev() for unres entries syzbot found that calling mr_mfc_uses_dev() for unres entries would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif alias to "struct sk_buff_head unresolved", which contain two pointers. This code never worked, lets remove it. [1] Unable to handle kernel paging request at virtual address ffff5fff2d536613 KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f] Modules linked in: CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline] lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334 Call trace: mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P) mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P) mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382 ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648 rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327 rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791 netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317 netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg net/socket.c:1055 [inline] sock_read_iter+0x2d8/0x40c net/socket.c:1125 new_sync_read fs/read_write.c:484 [inline] vfs_read+0x740/0x970 fs/read_write.c:565 ksys_read+0x15c/0x26c fs/read_write.c:708

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out of bounds read in smb2_sess_setup ksmbd does not consider the case of that smb2 session setup is in compound request. If this is the second payload of the compound, OOB read issue occurs while processing the first payload in the smb2_sess_setup().

In the Linux kernel, the following vulnerability has been resolved: binder: fix OOB in binder_add_freeze_work() In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped to acquire the node->lock first (lock nesting order). This can race with binder_deferred_release() which removes the nodes from the proc->nodes rbtree and adds them into binder_dead_nodes list. This leads to a broken iteration in binder_add_freeze_work() as rb_next() will use data from binder_dead_nodes, triggering an out-of-bounds access: ================================================================== BUG: KASAN: global-out-of-bounds in rb_next+0xfc/0x124 Read of size 8 at addr ffffcb84285f7170 by task freeze/660 CPU: 8 UID: 0 PID: 660 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #18 Hardware name: linux,dummy-virt (DT) Call trace: rb_next+0xfc/0x124 binder_add_freeze_work+0x344/0x534 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 The buggy address belongs to the variable: binder_dead_nodes+0x10/0x40 [...] ================================================================== This is possible because proc->nodes (rbtree) and binder_dead_nodes (list) share entries in binder_node through a union: struct binder_node { [...] union { struct rb_node rb_node; struct hlist_node dead_node; }; Fix the race by checking that the proc is still alive. If not, simply break out of the iteration.

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix potential out-of-bounds access on the first resume Out-of-bounds access occurs if the fast device is expanded unexpectedly before the first-time resume of the cache table. This happens because expanding the fast device requires reloading the cache table for cache_create to allocate new in-core data structures that fit the new size, and the check in cache_preresume is not performed during the first resume, leading to the issue. Reproduce steps: 1. prepare component devices: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct 2. load a cache table of 512 cache blocks, and deliberately expand the fast device before resuming the cache, making the in-core data structures inadequate. dmsetup create cache --notable dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache 3. suspend the cache to write out the in-core dirty bitset and hint array, leading to out-of-bounds access to the dirty bitset at offset 0x40: dmsetup suspend cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80 Read of size 8 at addr ffffc90000085040 by task dmsetup/90 (...snip...) The buggy address belongs to the virtual mapping at [ffffc90000085000, ffffc90000087000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by checking the size change on the first resume.

In the Linux kernel, the following vulnerability has been resolved: bpf: Check validity of link->type in bpf_link_show_fdinfo() If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing bpf_link_type_strs[link->type] may result in an out-of-bounds access. To spot such missed invocations early in the future, checking the validity of link->type in bpf_link_show_fdinfo() and emitting a warning when such invocations are missed.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't implemented, but driver expects number of handlers is NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by removing ID. Addresses-Coverity-ID: 1598775 ("Out-of-bounds read")

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits 4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't enforce 32-byte alignment of nCR3. In the absolute worst case scenario, failure to ignore bits 4:0 can result in an out-of-bounds read, e.g. if the target page is at the end of a memslot, and the VMM isn't using guard pages. Per the APM: The CR3 register points to the base address of the page-directory-pointer table. The page-directory-pointer table is aligned on a 32-byte boundary, with the low 5 address bits 4:0 assumed to be 0. And the SDM's much more explicit: 4:0 Ignored Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow that is broken.

In the Linux kernel, the following vulnerability has been resolved: capabilities: fix undefined behavior in bit shift for CAP_TO_MASK Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c cap_task_prctl+0x561/0x6f0 security_task_prctl+0x5a/0xb0 __x64_sys_prctl+0x61/0x8f0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix get_nodes out of bound access When user specified more nodes than supported, get_nodes will access nmask array out of bounds.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on i_extra_isize in is_alive() syzbot found a f2fs bug: BUG: KASAN: slab-out-of-bounds in data_blkaddr fs/f2fs/f2fs.h:2891 [inline] BUG: KASAN: slab-out-of-bounds in is_alive fs/f2fs/gc.c:1117 [inline] BUG: KASAN: slab-out-of-bounds in gc_data_segment fs/f2fs/gc.c:1520 [inline] BUG: KASAN: slab-out-of-bounds in do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734 Read of size 4 at addr ffff888076557568 by task kworker/u4:3/52 CPU: 1 PID: 52 Comm: kworker/u4:3 Not tainted 6.1.0-rc4-syzkaller-00362-gfef7fd48922d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: writeback wb_workfn (flush-7:0) Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbb/0x1f0 mm/kasan/report.c:495 data_blkaddr fs/f2fs/f2fs.h:2891 [inline] is_alive fs/f2fs/gc.c:1117 [inline] gc_data_segment fs/f2fs/gc.c:1520 [inline] do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734 f2fs_gc+0x88c/0x20a0 fs/f2fs/gc.c:1831 f2fs_balance_fs+0x544/0x6b0 fs/f2fs/segment.c:410 f2fs_write_inode+0x57e/0xe20 fs/f2fs/inode.c:753 write_inode fs/fs-writeback.c:1440 [inline] __writeback_single_inode+0xcfc/0x1440 fs/fs-writeback.c:1652 writeback_sb_inodes+0x54d/0xf90 fs/fs-writeback.c:1870 wb_writeback+0x2c5/0xd70 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x2dc/0x12f0 fs/fs-writeback.c:2227 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 The root cause is that we forgot to do sanity check on .i_extra_isize in below path, result in accessing invalid address later, fix it. - gc_data_segment - is_alive - data_blkaddr - offset_in_addr

In the Linux kernel, the following vulnerability has been resolved: zonefs: fix zonefs_iomap_begin() for reads If a readahead is issued to a sequential zone file with an offset exactly equal to the current file size, the iomap type is set to IOMAP_UNWRITTEN, which will prevent an IO, but the iomap length is calculated as 0. This causes a WARN_ON() in iomap_iter(): [17309.548939] WARNING: CPU: 3 PID: 2137 at fs/iomap/iter.c:34 iomap_iter+0x9cf/0xe80 [...] [17309.650907] RIP: 0010:iomap_iter+0x9cf/0xe80 [...] [17309.754560] Call Trace: [17309.757078] <TASK> [17309.759240] ? lock_is_held_type+0xd8/0x130 [17309.763531] iomap_readahead+0x1a8/0x870 [17309.767550] ? iomap_read_folio+0x4c0/0x4c0 [17309.771817] ? lockdep_hardirqs_on_prepare+0x400/0x400 [17309.778848] ? lock_release+0x370/0x750 [17309.784462] ? folio_add_lru+0x217/0x3f0 [17309.790220] ? reacquire_held_locks+0x4e0/0x4e0 [17309.796543] read_pages+0x17d/0xb60 [17309.801854] ? folio_add_lru+0x238/0x3f0 [17309.807573] ? readahead_expand+0x5f0/0x5f0 [17309.813554] ? policy_node+0xb5/0x140 [17309.819018] page_cache_ra_unbounded+0x27d/0x450 [17309.825439] filemap_get_pages+0x500/0x1450 [17309.831444] ? filemap_add_folio+0x140/0x140 [17309.837519] ? lock_is_held_type+0xd8/0x130 [17309.843509] filemap_read+0x28c/0x9f0 [17309.848953] ? zonefs_file_read_iter+0x1ea/0x4d0 [zonefs] [17309.856162] ? trace_contention_end+0xd6/0x130 [17309.862416] ? __mutex_lock+0x221/0x1480 [17309.868151] ? zonefs_file_read_iter+0x166/0x4d0 [zonefs] [17309.875364] ? filemap_get_pages+0x1450/0x1450 [17309.881647] ? __mutex_unlock_slowpath+0x15e/0x620 [17309.888248] ? wait_for_completion_io_timeout+0x20/0x20 [17309.895231] ? lock_is_held_type+0xd8/0x130 [17309.901115] ? lock_is_held_type+0xd8/0x130 [17309.906934] zonefs_file_read_iter+0x356/0x4d0 [zonefs] [17309.913750] new_sync_read+0x2d8/0x520 [17309.919035] ? __x64_sys_lseek+0x1d0/0x1d0 Furthermore, this causes iomap_readahead() to loop forever as iomap_readahead_iter() always returns 0, making no progress. Fix this by treating reads after the file size as access to holes, setting the iomap type to IOMAP_HOLE, the iomap addr to IOMAP_NULL_ADDR and using the length argument as is for the iomap length. To simplify the code with this change, zonefs_iomap_begin() is split into the read variant, zonefs_read_iomap_begin() and zonefs_read_iomap_ops, and the write variant, zonefs_write_iomap_begin() and zonefs_write_iomap_ops.

In the Linux kernel, the following vulnerability has been resolved: riscv: fix reserved memory setup Currently, RISC-V sets up reserved memory using the "early" copy of the device tree. As a result, when trying to get a reserved memory region using of_reserved_mem_lookup(), the pointer to reserved memory regions is using the early, pre-virtual-memory address which causes a kernel panic when trying to use the buffer's name: Unable to handle kernel paging request at virtual address 00000000401c31ac Oops [#1] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1 Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) epc : string+0x4a/0xea ra : vsnprintf+0x1e4/0x336 epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0 gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000 t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20 s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000 a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008 s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00 s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002 s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617 t5 : ffffffff812f3618 t6 : ffffffff81203d08 status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d [<ffffffff80338936>] vsnprintf+0x1e4/0x336 [<ffffffff80055ae2>] vprintk_store+0xf6/0x344 [<ffffffff80055d86>] vprintk_emit+0x56/0x192 [<ffffffff80055ed8>] vprintk_default+0x16/0x1e [<ffffffff800563d2>] vprintk+0x72/0x80 [<ffffffff806813b2>] _printk+0x36/0x50 [<ffffffff8068af48>] print_reserved_mem+0x1c/0x24 [<ffffffff808057ec>] paging_init+0x528/0x5bc [<ffffffff808031ae>] setup_arch+0xd0/0x592 [<ffffffff8080070e>] start_kernel+0x82/0x73c early_init_fdt_scan_reserved_mem() takes no arguments as it operates on initial_boot_params, which is populated by early_init_dt_verify(). On RISC-V, early_init_dt_verify() is called twice. Once, directly, in setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly, very early in the boot process, by parse_dtb() when it calls early_init_dt_scan_nodes(). This first call uses dtb_early_va to set initial_boot_params, which is not usable later in the boot process when early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the corresponding call to early_init_dt_scan_nodes() uses fixmap addresses and doesn't suffer the same fate. Move early_init_fdt_scan_reserved_mem() further along the boot sequence, after the direct call to early_init_dt_verify() in setup_arch() so that the names use the correct virtual memory addresses. The above supposed that CONFIG_BUILTIN_DTB was not set, but should work equally in the case where it is - unflatted_and_copy_device_tree() also updates initial_boot_params.

In the Linux kernel, the following vulnerability has been resolved: dm array: fix releasing a faulty array block twice in dm_array_cursor_end When dm_bm_read_lock() fails due to locking or checksum errors, it releases the faulty block implicitly while leaving an invalid output pointer behind. The caller of dm_bm_read_lock() should not operate on this invalid dm_block pointer, or it will lead to undefined result. For example, the dm_array_cursor incorrectly caches the invalid pointer on reading a faulty array block, causing a double release in dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put(). Reproduce steps: 1. initialize a cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. wipe the second array block offline dmsteup remove cache cmeta cdata corig mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try reopen the cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) device-mapper: array: array_block_check failed: blocknr 0 != wanted 10 device-mapper: block manager: array validator check failed for block 10 device-mapper: array: get_ablock failed device-mapper: cache metadata: dm_array_cursor_next for mapping failed ------------[ cut here ]------------ kernel BUG at drivers/md/dm-bufio.c:638! Fix by setting the cached block pointer to NULL on errors. In addition to the reproducer described above, this fix can be verified using the "array_cursor/damaged" test in dm-unit: dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR>

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix information leak in triggered buffer The 'scan' local struct is used to push data to user space from a triggered buffer, but it has a hole between the sample (unsigned int) and the timestamp. This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer The 'data' array is allocated via kmalloc() and it is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Use kzalloc for the memory allocation to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: iio: light: vcnl4035: fix information leak in triggered buffer The 'buffer' local array is used to push data to userspace from a triggered buffer, but it does not set an initial value for the single data element, which is an u16 aligned to 8 bytes. That leaves at least 4 bytes uninitialized even after writing an integer value with regmap_read(). Initialize the array to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: iio: pressure: zpa2326: fix information leak in triggered buffer The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1745: fix information leak in triggered buffer The 'scan' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: media: mgb4: protect driver against spectre Frequency range is set from sysfs via frequency_range_store(), being vulnerable to spectre, as reported by smatch: drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r] drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set' Fix it.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix info leak when fetching board id Add the missing sanity check when fetching the board id to avoid leaking slab data when later requesting the firmware.

In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix kernel panic caused by incorrect error handling The error path while failing to register devices on the TEE bus has a bug leading to kernel panic as follows: [ 15.398930] Unable to handle kernel paging request at virtual address ffff07ed00626d7c [ 15.406913] Mem abort info: [ 15.409722] ESR = 0x0000000096000005 [ 15.413490] EC = 0x25: DABT (current EL), IL = 32 bits [ 15.418814] SET = 0, FnV = 0 [ 15.421878] EA = 0, S1PTW = 0 [ 15.425031] FSC = 0x05: level 1 translation fault [ 15.429922] Data abort info: [ 15.432813] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 15.438310] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 15.443372] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 15.448697] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000d9e3e000 [ 15.455413] [ffff07ed00626d7c] pgd=1800000bffdf9003, p4d=1800000bffdf9003, pud=0000000000000000 [ 15.464146] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Commit 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration") lead to the introduction of this bug. So fix it appropriately.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix VLAN traffic leaks PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but was not reset when it is disabled, which may cause traffic leaks: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br1 ip link set br0 type bridge vlan_filtering 0 ip link set br1 type bridge vlan_filtering 0 # traffic in br0 and br1 will start leaking to each other As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the PCR_MATRIX write from mt7530_port_set_vlan_aware.