In the Linux kernel, the following vulnerability has been resolved: tls: fix use-after-free on failed backlog decryption When the decrypt request goes to the backlog and crypto_aead_decrypt returns -EBUSY, tls_do_decryption will wait until all async decryptions have completed. If one of them fails, tls_do_decryption will return -EBADMSG and tls_decrypt_sg jumps to the error path, releasing all the pages. But the pages have been passed to the async callback, and have already been released by tls_decrypt_done. The only true async case is when crypto_aead_decrypt returns -EINPROGRESS. With -EBUSY, we already waited so we can tell tls_sw_recvmsg that the data is available for immediate copy, but we need to notify tls_decrypt_sg (via the new ->async_done flag) that the memory has already been released.

In the Linux kernel, the following vulnerability has been resolved: aio: fix use-after-free due to missing POLLFREE handling signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <ramjiyani@google.com> (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.

In the Linux kernel, the following vulnerability has been resolved: can: vxcan: vxcan_xmit: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni().

In the Linux kernel, the following vulnerability has been resolved: 9p: add missing locking around taking dentry fid list Fix a use-after-free on dentry's d_fsdata fid list when a thread looks up a fid through dentry while another thread unlinks it: UAF thread: refcount_t: addition on 0; use-after-free. p9_fid_get linux/./include/net/9p/client.h:262 v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129 v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181 v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314 v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400 vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248 Freed by: p9_fid_destroy (inlined) p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456 p9_fid_put linux/./include/net/9p/client.h:278 v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55 v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518 vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335 The problem is that d_fsdata was not accessed under d_lock, because d_release() normally is only called once the dentry is otherwise no longer accessible but since we also call it explicitly in v9fs_remove that lock is required: move the hlist out of the dentry under lock then unref its fids once they are no longer accessible.

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Avoid use-after-free on suspend/resume hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx().

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_debug_files_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix use-after-free on probe deferral The bridge counter was never reset when tearing down the DRM device so that stale pointers to deallocated structures would be accessed on the next tear down (e.g. after a second late bind deferral). Given enough bridges and a few probe deferrals this could currently also lead to data beyond the bridge array being corrupted. Patchwork: https://patchwork.freedesktop.org/patch/502665/

In the Linux kernel, the following vulnerability has been resolved: coresight: Clear the connection field properly coresight devices track their connections (output connections) and hold a reference to the fwnode. When a device goes away, we walk through the devices on the coresight bus and make sure that the references are dropped. This happens both ways: a) For all output connections from the device, drop the reference to the target device via coresight_release_platform_data() b) Iterate over all the devices on the coresight bus and drop the reference to fwnode if *this* device is the target of the output connection, via coresight_remove_conns()->coresight_remove_match(). However, the coresight_remove_match() doesn't clear the fwnode field, after dropping the reference, this causes use-after-free and additional refcount drops on the fwnode. e.g., if we have two devices, A and B, with a connection, A -> B. If we remove B first, B would clear the reference on B, from A via coresight_remove_match(). But when A is removed, it still has a connection with fwnode still pointing to B. Thus it tries to drops the reference in coresight_release_platform_data(), raising the bells like : [ 91.990153] ------------[ cut here ]------------ [ 91.990163] refcount_t: addition on 0; use-after-free. [ 91.990212] WARNING: CPU: 0 PID: 461 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x144 [ 91.990260] Modules linked in: coresight_funnel coresight_replicator coresight_etm4x(-) crct10dif_ce coresight ip_tables x_tables ipv6 [last unloaded: coresight_cpu_debug] [ 91.990398] CPU: 0 PID: 461 Comm: rmmod Tainted: G W T 5.19.0-rc2+ #53 [ 91.990418] Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 [ 91.990434] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 91.990454] pc : refcount_warn_saturate+0xa0/0x144 [ 91.990476] lr : refcount_warn_saturate+0xa0/0x144 [ 91.990496] sp : ffff80000c843640 [ 91.990509] x29: ffff80000c843640 x28: ffff800009957c28 x27: ffff80000c8439a8 [ 91.990560] x26: ffff00097eff1990 x25: ffff8000092b6ad8 x24: ffff00097eff19a8 [ 91.990610] x23: ffff80000c8439a8 x22: 0000000000000000 x21: ffff80000c8439c2 [ 91.990659] x20: 0000000000000000 x19: ffff00097eff1a10 x18: ffff80000ab99c40 [ 91.990708] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80000abf6fa0 [ 91.990756] x14: 000000000000001d x13: 0a2e656572662d72 x12: 657466612d657375 [ 91.990805] x11: 203b30206e6f206e x10: 6f69746964646120 x9 : ffff8000081aba28 [ 91.990854] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 : 746e756f63666572 [ 91.990903] x5 : ffff00097648ec58 x4 : 0000000000000000 x3 : 0000000000000027 [ 91.990952] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00080260ba00 [ 91.991000] Call trace: [ 91.991012] refcount_warn_saturate+0xa0/0x144 [ 91.991034] kobject_get+0xac/0xb0 [ 91.991055] of_node_get+0x2c/0x40 [ 91.991076] of_fwnode_get+0x40/0x60 [ 91.991094] fwnode_handle_get+0x3c/0x60 [ 91.991116] fwnode_get_nth_parent+0xf4/0x110 [ 91.991137] fwnode_full_name_string+0x48/0xc0 [ 91.991158] device_node_string+0x41c/0x530 [ 91.991178] pointer+0x320/0x3ec [ 91.991198] vsnprintf+0x23c/0x750 [ 91.991217] vprintk_store+0x104/0x4b0 [ 91.991238] vprintk_emit+0x8c/0x360 [ 91.991257] vprintk_default+0x44/0x50 [ 91.991276] vprintk+0xcc/0xf0 [ 91.991295] _printk+0x68/0x90 [ 91.991315] of_node_release+0x13c/0x14c [ 91.991334] kobject_put+0x98/0x114 [ 91.991354] of_node_put+0x24/0x34 [ 91.991372] of_fwnode_put+0x40/0x5c [ 91.991390] fwnode_handle_put+0x38/0x50 [ 91.991411] coresight_release_platform_data+0x74/0xb0 [coresight] [ 91.991472] coresight_unregister+0x64/0xcc [coresight] [ 91.991525] etm4_remove_dev+0x64/0x78 [coresight_etm4x] [ 91.991563] etm4_remove_amba+0x1c/0x2c [coresight_etm4x] [ 91.991598] amba_remove+0x3c/0x19c ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit() > ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb); may be schedule, and then complete before the line > ndev->stats.tx_bytes += skb->len; [ 46.912801] ================================================================== [ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328 [ 46.935991] [ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[REDACTED] #1 [ 46.947255] Hardware name: [REDACTED] [ 46.954568] Call trace: [ 46.957037] dump_backtrace+0x0/0x2b8 [ 46.960719] show_stack+0x24/0x30 [ 46.964052] dump_stack+0x128/0x194 [ 46.967557] print_address_description.isra.0+0x64/0x380 [ 46.972877] __kasan_report+0x1d4/0x240 [ 46.976723] kasan_report+0xc/0x18 [ 46.980138] __asan_report_load4_noabort+0x18/0x20 [ 46.985027] brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.990613] dev_hard_start_xmit+0x1bc/0xda0 [ 46.994894] sch_direct_xmit+0x198/0xd08 [ 46.998827] __qdisc_run+0x37c/0x1dc0 [ 47.002500] __dev_queue_xmit+0x1528/0x21f8 [ 47.006692] dev_queue_xmit+0x24/0x30 [ 47.010366] neigh_resolve_output+0x37c/0x678 [ 47.014734] ip_finish_output2+0x598/0x2458 [ 47.018927] __ip_finish_output+0x300/0x730 [ 47.023118] ip_output+0x2e0/0x430 [ 47.026530] ip_local_out+0x90/0x140 [ 47.030117] igmpv3_sendpack+0x14c/0x228 [ 47.034049] igmpv3_send_cr+0x384/0x6b8 [ 47.037895] igmp_ifc_timer_expire+0x4c/0x118 [ 47.042262] call_timer_fn+0x1cc/0xbe8 [ 47.046021] __run_timers+0x4d8/0xb28 [ 47.049693] run_timer_softirq+0x24/0x40 [ 47.053626] __do_softirq+0x2c0/0x117c [ 47.057387] irq_exit+0x2dc/0x388 [ 47.060715] __handle_domain_irq+0xb4/0x158 [ 47.064908] gic_handle_irq+0x58/0xb0 [ 47.068581] el0_irq_naked+0x50/0x5c [ 47.072162] [ 47.073665] Allocated by task 328: [ 47.077083] save_stack+0x24/0xb0 [ 47.080410] __kasan_kmalloc.isra.0+0xc0/0xe0 [ 47.084776] kasan_slab_alloc+0x14/0x20 [ 47.088622] kmem_cache_alloc+0x15c/0x468 [ 47.092643] __alloc_skb+0xa4/0x498 [ 47.096142] igmpv3_newpack+0x158/0xd78 [ 47.099987] add_grhead+0x210/0x288 [ 47.103485] add_grec+0x6b0/0xb70 [ 47.106811] igmpv3_send_cr+0x2e0/0x6b8 [ 47.110657] igmp_ifc_timer_expire+0x4c/0x118 [ 47.115027] call_timer_fn+0x1cc/0xbe8 [ 47.118785] __run_timers+0x4d8/0xb28 [ 47.122457] run_timer_softirq+0x24/0x40 [ 47.126389] __do_softirq+0x2c0/0x117c [ 47.130142] [ 47.131643] Freed by task 180: [ 47.134712] save_stack+0x24/0xb0 [ 47.138041] __kasan_slab_free+0x108/0x180 [ 47.142146] kasan_slab_free+0x10/0x18 [ 47.145904] slab_free_freelist_hook+0xa4/0x1b0 [ 47.150444] kmem_cache_free+0x8c/0x528 [ 47.154292] kfree_skbmem+0x94/0x108 [ 47.157880] consume_skb+0x10c/0x5a8 [ 47.161466] __dev_kfree_skb_any+0x88/0xa0 [ 47.165598] brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil] [ 47.171023] brcmf_txfinalize+0xec/0x190 [brcmfmac] [ 47.176016] brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac] [ 47.182056] brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac] [ 47.187568] brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac] [ 47.192529] brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac] [ 47.197859] process_one_work+0x7fc/0x1a80 [ 47.201965] worker_thread+0x31c/0xc40 [ 47.205726] kthread+0x2d8/0x370 [ 47.208967] ret_from_fork+0x10/0x18 [ 47.212546] [ 47.214051] The buggy address belongs to the object at ffffff803f588280 [ 47.214051] which belongs to the cache skbuff_head_cache of size 208 [ 47.227086] The buggy address is located 104 bytes inside of [ 47.227086] 208-byte region [ffffff803f588280, ffffff803f588350) [ 47.238814] The buggy address belongs to the page: [ 47.243618] page:ffffffff00dd6200 refcount:1 mapcou ---truncated---

A flaw was found in the Nosy driver in the Linux kernel. This issue allows a device to be inserted twice into a doubly-linked list, leading to a use-after-free when one of these devices is removed. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. Versions before kernel 5.12-rc6 are affected

In the Linux kernel, the following vulnerability has been resolved: drm/meson: reorder driver deinit sequence to fix use-after-free bug Unloading the driver triggers the following KASAN warning: [ +0.006275] ============================================================= [ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0 [ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695 [ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1 [ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT) [ +0.000008] Call trace: [ +0.000007] dump_backtrace+0x1ec/0x280 [ +0.000013] show_stack+0x24/0x80 [ +0.000008] dump_stack_lvl+0x98/0xd4 [ +0.000011] print_address_description.constprop.0+0x80/0x520 [ +0.000011] print_report+0x128/0x260 [ +0.000007] kasan_report+0xb8/0xfc [ +0.000008] __asan_report_load8_noabort+0x3c/0x50 [ +0.000010] __list_del_entry_valid+0xe0/0x1a0 [ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm] [ +0.000172] drm_bridge_detach+0x94/0x260 [drm] [ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm] [ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm] [ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm] [ +0.000144] drm_managed_release+0x170/0x414 [drm] [ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm] [ +0.000143] drm_dev_put+0x20/0x30 [drm] [ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm] [ +0.000028] take_down_aggregate_device+0xb0/0x160 [ +0.000016] component_del+0x18c/0x360 [ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ +0.000015] platform_remove+0x64/0xb0 [ +0.000009] device_remove+0xb8/0x154 [ +0.000009] device_release_driver_internal+0x398/0x5b0 [ +0.000009] driver_detach+0xac/0x1b0 [ +0.000009] bus_remove_driver+0x158/0x29c [ +0.000009] driver_unregister+0x70/0xb0 [ +0.000008] platform_driver_unregister+0x20/0x2c [ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi] [ +0.000012] __do_sys_delete_module+0x288/0x400 [ +0.000011] __arm64_sys_delete_module+0x5c/0x80 [ +0.000009] invoke_syscall+0x74/0x260 [ +0.000009] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000012] el0t_64_sync_handler+0x11c/0x150 [ +0.000008] el0t_64_sync+0x18c/0x190 [ +0.000018] Allocated by task 0: [ +0.000007] (stack is not available) [ +0.000011] Freed by task 2695: [ +0.000008] kasan_save_stack+0x2c/0x5c [ +0.000011] kasan_set_track+0x2c/0x40 [ +0.000008] kasan_set_free_info+0x28/0x50 [ +0.000009] ____kasan_slab_free+0x128/0x1d4 [ +0.000008] __kasan_slab_free+0x18/0x24 [ +0.000007] slab_free_freelist_hook+0x108/0x230 [ +0.000011] kfree+0x110/0x35c [ +0.000008] release_nodes+0xf0/0x16c [ +0.000009] devres_release_group+0x180/0x270 [ +0.000008] component_unbind+0x128/0x1e0 [ +0.000010] component_unbind_all+0x1b8/0x264 [ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm] [ +0.000025] take_down_aggregate_device+0xb0/0x160 [ +0.000009] component_del+0x18c/0x360 [ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ +0.000012] platform_remove+0x64/0xb0 [ +0.000008] device_remove+0xb8/0x154 [ +0.000009] device_release_driver_internal+0x398/0x5b0 [ +0.000009] driver_detach+0xac/0x1b0 [ +0.000009] bus_remove_driver+0x158/0x29c [ +0.000008] driver_unregister+0x70/0xb0 [ +0.000008] platform_driver_unregister+0x20/0x2c [ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi] [ +0.000011] __do_sys_delete_module+0x288/0x400 [ +0.000010] __arm64_sys_delete_module+0x5c/0x80 [ +0.000008] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000008] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000009] el0t_64_sync_handler+0x11c/0x150 [ +0.000009] el0t_64_sync+0x18c/0x190 [ +0.000014] The buggy address belongs to the object at ffff000020c39000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix KASAN use-after-free Read in compute_effective_progs Syzbot found a Use After Free bug in compute_effective_progs(). The reproducer creates a number of BPF links, and causes a fault injected alloc to fail, while calling bpf_link_detach on them. Link detach triggers the link to be freed by bpf_link_free(), which calls __cgroup_bpf_detach() and update_effective_progs(). If the memory allocation in this function fails, the function restores the pointer to the bpf_cgroup_link on the cgroup list, but the memory gets freed just after it returns. After this, every subsequent call to update_effective_progs() causes this already deallocated pointer to be dereferenced in prog_list_length(), and triggers KASAN UAF error. To fix this issue don't preserve the pointer to the prog or link in the list, but remove it and replace it with a dummy prog without shrinking the table. The subsequent call to __cgroup_bpf_detach() or __cgroup_bpf_detach() will correct it.

A flaw was found in the Linux kernel implementation of proxied virtualized TPM devices. On a system where virtualized TPM devices are configured (this is not the default) a local attacker can create a use-after-free and create a situation where it may be possible to escalate privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: igb: Do not free q_vector unless new one was allocated Avoid potential use-after-free condition under memory pressure. If the kzalloc() fails, q_vector will be freed but left in the original adapter->q_vector[v_idx] array position.

In the Linux kernel, the following vulnerability has been resolved: ASoC: sof_es8336: fix possible use-after-free in sof_es8336_remove() sof_es8336_remove() calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential use-after-free in jbd2_fc_wait_bufs In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count which may lead to use-after-free. So judge buffer if uptodate before put buffer head reference count.

A use-after-free flaw was found in the Linux kernel’s nouveau driver in how a user triggers a memory overflow that causes the nvkm_vma_tail function to fail. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925e: fix use-after-free in free_irq() From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test to make sure the shared irq handler should be able to handle the unexpected event after deregistration. For this case, let's apply MT76_REMOVED flag to indicate the device was removed and do not run into the resource access anymore.

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix use-after-free on source server when doing inter-server copy Use-after-free occurred when the laundromat tried to free expired cpntf_state entry on the s2s_cp_stateids list after inter-server copy completed. The sc_cp_list that the expired copy state was inserted on was already freed. When COPY completes, the Linux client normally sends LOCKU(lock_state x), FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server. The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state from the s2s_cp_stateids list before freeing the lock state's stid. However, sometimes the CLOSE was sent before the FREE_STATEID request. When this happens, the nfsd4_close_open_stateid call from nfsd4_close frees all lock states on its st_locks list without cleaning up the copy state on the sc_cp_list list. When the time the FREE_STATEID arrives the server returns BAD_STATEID since the lock state was freed. This causes the use-after-free error to occur when the laundromat tries to free the expired cpntf_state. This patch adds a call to nfs4_free_cpntf_statelist in nfsd4_close_open_stateid to clean up the copy state before calling free_ol_stateid_reaplist to free the lock state's stid on the reaplist.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() There is an use-after-free reported by KASAN: BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82 Read of size 1 at addr ffff888112afc460 by task modprobe/2111 CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), Call Trace: <TASK> kasan_report+0xae/0xe0 acpi_ut_remove_reference+0x3b/0x82 acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5 acpi_ds_store_object_to_local+0x15d/0x3a0 acpi_ex_store+0x78d/0x7fd acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b acpi_ps_parse_aml+0x217/0x8d5 ... </TASK> The root cause of the problem is that the acpi_operand_object is freed when acpi_ut_walk_package_tree() fails in acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in acpi_ut_copy_iobject_to_iobject(). The problem was introduced by "8aa5e56eeb61" commit, this commit is to fix memory leak in acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove operation, lead to "acpi_operand_object" used after free. Fix it by removing acpi_ut_remove_reference() in acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage() is called to copy an internal package object into another internal package object, when it fails, the memory of acpi_operand_object should be freed by the caller.

In the Linux kernel before 5.12.4, net/bluetooth/hci_event.c has a use-after-free when destroying an hci_chan, aka CID-5c4c8c954409. This leads to writing an arbitrary value.

The Linux kernel before 5.11.14 has a use-after-free in cipso_v4_genopt in net/ipv4/cipso_ipv4.c because the CIPSO and CALIPSO refcounting for the DOI definitions is mishandled, aka CID-ad5d07f4a9cd. This leads to writing an arbitrary value.

In the Linux kernel, the following vulnerability has been resolved: ax25: rcu protect dev->ax25_ptr syzbot found a lockdep issue [1]. We should remove ax25 RTNL dependency in ax25_setsockopt() This should also fix a variety of possible UAF in ax25. [1] WARNING: possible circular locking dependency detected 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted ------------------------------------------------------ syz.5.1818/12806 is trying to acquire lock: ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 but task is already holding lock: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_AX25){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x100 net/core/sock.c:3642 lock_sock include/net/sock.h:1618 [inline] ax25_kill_by_device net/ax25/af_ax25.c:101 [inline] ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026 dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563 dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820 sock_do_ioctl+0x240/0x460 net/socket.c:1234 sock_ioctl+0x626/0x8e0 net/socket.c:1339 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735 ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 do_sock_setsockopt+0x3af/0x720 net/socket.c:2324 __sys_setsockopt net/socket.c:2349 [inline] __do_sys_setsockopt net/socket.c:2355 [inline] __se_sys_setsockopt net/socket.c:2352 [inline] __x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_AX25); lock(rtnl_mutex); lock(sk_lock-AF_AX25); lock(rtnl_mutex); *** DEADLOCK *** 1 lock held by syz.5.1818/12806: #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 stack backtrace: CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/lockin ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free in tipc_conn_close(). syzbot reported a null-ptr-deref in tipc_conn_close() during netns dismantle. [0] tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls tipc_conn_close() for each tipc_conn. The problem is that tipc_conn_close() is called after releasing the IDR lock. At the same time, there might be tipc_conn_recv_work() running and it could call tipc_conn_close() for the same tipc_conn and release its last ->kref. Once we release the IDR lock in tipc_topsrv_stop(), there is no guarantee that the tipc_conn is alive. Let's hold the ref before releasing the lock and put the ref after tipc_conn_close() in tipc_topsrv_stop(). [0]: BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435 CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1fc/0x2ef lib/dump_stack.c:118 print_address_description.cold+0x54/0x219 mm/kasan/report.c:256 kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354 kasan_report mm/kasan/report.c:412 [inline] __asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433 tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 tipc_topsrv_stop net/tipc/topsrv.c:701 [inline] tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722 ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153 cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Allocated by task 23: kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192 tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Freed by task 23: __cache_free mm/slab.c:3503 [inline] kfree+0xcc/0x210 mm/slab.c:3822 tipc_conn_kref_release net/tipc/topsrv.c:150 [inline] kref_put include/linux/kref.h:70 [inline] conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff888099305a00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff888099305a00, ffff888099305c00) The buggy address belongs to the page: page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0 flags: 0xfff00000000100(slab) raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940 raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

In the Linux kernel, the following vulnerability has been resolved: mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped By inducing delays in the right places, Jann Horn created a reproducer for a hard to hit UAF issue that became possible after VMAs were allowed to be recycled by adding SLAB_TYPESAFE_BY_RCU to their cache. Race description is borrowed from Jann's discovery report: lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under rcu_read_lock(). At that point, the VMA may be concurrently freed, and it can be recycled by another process. vma_start_read() then increments the vma->vm_refcnt (if it is in an acceptable range), and if this succeeds, vma_start_read() can return a recycled VMA. In this scenario where the VMA has been recycled, lock_vma_under_rcu() will then detect the mismatching ->vm_mm pointer and drop the VMA through vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm. This is wrong: It implicitly assumes that the caller is keeping the VMA's mm alive, but in this scenario the caller has no relation to the VMA's mm, so the rcuwait_wake_up() can cause UAF. The diagram depicting the race: T1 T2 T3 == == == lock_vma_under_rcu mas_walk <VMA gets removed from mm> mmap <the same VMA is reallocated> vma_start_read __refcount_inc_not_zero_limited_acquire munmap __vma_enter_locked refcount_add_not_zero vma_end_read vma_refcount_put __refcount_dec_and_test rcuwait_wait_event <finish operation> rcuwait_wake_up [UAF] Note that rcuwait_wait_event() in T3 does not block because refcount was already dropped by T1. At this point T3 can exit and free the mm causing UAF in T1. To avoid this we move vma->vm_mm verification into vma_start_read() and grab vma->vm_mm to stabilize it before vma_refcount_put() operation. [surenb@google.com: v3]

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a window for use-after-free During a destroy CQ an interrupt may cause processing of a CQE after CQ resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is called under the cq_lock.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not allow CHAIN_ID to refer to another table When doing lookups for chains on the same batch by using its ID, a chain from a different table can be used. If a rule is added to a table but refers to a chain in a different table, it will be linked to the chain in table2, but would have expressions referring to objects in table1. Then, when table1 is removed, the rule will not be removed as its linked to a chain in table2. When expressions in the rule are processed or removed, that will lead to a use-after-free. When looking for chains by ID, use the table that was used for the lookup by name, and only return chains belonging to that same table.

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Fix a use-after-free bug in open If someone cancels the open RPC call, then we must not try to free either the open slot or the layoutget operation arguments, since they are likely still in use by the hung RPC call.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free We've already freed the assoc_data at this point, so need to use another copy of the AP (MLD) address instead.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0

In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace: <TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: efi: ssdt: Don't free memory if ACPI table was loaded successfully Amadeusz reports KASAN use-after-free errors introduced by commit 3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from variables"). The problem appears to be that the memory that holds the new ACPI table is now freed unconditionally, instead of only when the ACPI core reported a failure to load the table. So let's fix this, by omitting the kfree() on success.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix error code path in acpi_ds_call_control_method() A use-after-free in acpi_ps_parse_aml() after a failing invocaion of acpi_ds_call_control_method() is reported by KASAN [1] and code inspection reveals that next_walk_state pushed to the thread by acpi_ds_create_walk_state() is freed on errors, but it is not popped from the thread beforehand. Thus acpi_ds_get_current_walk_state() called by acpi_ps_parse_aml() subsequently returns it as the new walk state which is incorrect. To address this, make acpi_ds_call_control_method() call acpi_ds_pop_walk_state() to pop next_walk_state from the thread before returning an error.

In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Avoid double destroy of default endpoint The rpmsg_dev_remove() in rpmsg_core is the place for releasing this default endpoint. So need to avoid destroying the default endpoint in rpmsg_chrdev_eptdev_destroy(), this should be the same as rpmsg_eptdev_release(). Otherwise there will be double destroy issue that ept->refcount report warning: refcount_t: underflow; use-after-free. Call trace: refcount_warn_saturate+0xf8/0x150 virtio_rpmsg_destroy_ept+0xd4/0xec rpmsg_dev_remove+0x60/0x70 The issue can be reproduced by stopping remoteproc before closing the /dev/rpmsgX.

In the Linux kernel, the following vulnerability has been resolved: devlink: fix possible use-after-free and memory leaks in devlink_init() The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Make an unregister in case of unsuccessful registration.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DPLL, Fix possible use after free after delayed work timer triggers I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fo ---truncated---

In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0

In the Linux kernel, the following vulnerability has been resolved: net: gtp: Fix Use-After-Free in gtp_dellink Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when handling missing device in read_one_chunk Store the error code before freeing the extent_map. Though it's reference counted structure, in that function it's the first and last allocation so this would lead to a potential use-after-free. The error can happen eg. when chunk is stored on a missing device and the degraded mount option is missing. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721

In the Linux kernel, the following vulnerability has been resolved: fs: fix UAF/GPF bug in nilfs_mdt_destroy In alloc_inode, inode_init_always() could return -ENOMEM if security_inode_alloc() fails, which causes inode->i_private uninitialized. Then nilfs_is_metadata_file_inode() returns true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(), which frees the uninitialized inode->i_private and leads to crashes(e.g., UAF/GPF). Fix this by moving security_inode_alloc just prior to this_cpu_inc(nr_inodes)

In the Linux kernel, the following vulnerability has been resolved: greybus: Fix use-after-free bug in gb_interface_release due to race condition. In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code. if (!queue_work(system_long_wq, &intf->mode_switch_work)) { ... } If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows: CPU0 CPU1 | gb_interface_create | gb_interface_request_mode_switch gb_interface_release | kfree(intf) (free) | | gb_interface_mode_switch_work | mutex_lock(&intf->mutex) (use) Fix it by canceling the work before kfree.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix Use-After-Free in ovs_ct_exit Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

In the Linux kernel, the following vulnerability has been resolved: rds: tcp: Fix use-after-free of net in reqsk_timer_handler(). syzkaller reported a warning of netns tracker [0] followed by KASAN splat [1] and another ref tracker warning [1]. syzkaller could not find a repro, but in the log, the only suspicious sequence was as follows: 18:26:22 executing program 1: r0 = socket$inet6_mptcp(0xa, 0x1, 0x106) ... connect$inet6(r0, &(0x7f0000000080)={0xa, 0x4001, 0x0, @loopback}, 0x1c) (async) The notable thing here is 0x4001 in connect(), which is RDS_TCP_PORT. So, the scenario would be: 1. unshare(CLONE_NEWNET) creates a per netns tcp listener in rds_tcp_listen_init(). 2. syz-executor connect()s to it and creates a reqsk. 3. syz-executor exit()s immediately. 4. netns is dismantled. [0] 5. reqsk timer is fired, and UAF happens while freeing reqsk. [1] 6. listener is freed after RCU grace period. [2] Basically, reqsk assumes that the listener guarantees netns safety until all reqsk timers are expired by holding the listener's refcount. However, this was not the case for kernel sockets. Commit 740ea3c4a0b2 ("tcp: Clean up kernel listener's reqsk in inet_twsk_purge()") fixed this issue only for per-netns ehash. Let's apply the same fix for the global ehash. [0]: ref_tracker: net notrefcnt@0000000065449cc3 has 1/1 users at sk_alloc (./include/net/net_namespace.h:337 net/core/sock.c:2146) inet6_create (net/ipv6/af_inet6.c:192 net/ipv6/af_inet6.c:119) __sock_create (net/socket.c:1572) rds_tcp_listen_init (net/rds/tcp_listen.c:279) rds_tcp_init_net (net/rds/tcp.c:577) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:340) copy_net_ns (net/core/net_namespace.c:497) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_namespaces (kernel/nsproxy.c:228 (discriminator 4)) ksys_unshare (kernel/fork.c:3429) __x64_sys_unshare (kernel/fork.c:3496) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) ... WARNING: CPU: 0 PID: 27 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) [1]: BUG: KASAN: slab-use-after-free in inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966) Read of size 8 at addr ffff88801b370400 by task swapper/0/0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) kasan_report (mm/kasan/report.c:603) inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966) reqsk_timer_handler (net/ipv4/inet_connection_sock.c:979 net/ipv4/inet_connection_sock.c:1092) call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701) __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2038) run_timer_softirq (kernel/time/timer.c:2053) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632 kernel/softirq.c:644) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1076 (discriminator 14)) </IRQ> Allocated by task 258 on cpu 0 at 83.612050s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:343) kmem_cache_alloc (mm/slub.c:3813 mm/slub.c:3860 mm/slub.c:3867) copy_net_ns (./include/linux/slab.h:701 net/core/net_namespace.c:421 net/core/net_namespace.c:480) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_name ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: unset reloc control if transaction commit fails in prepare_to_relocate() In btrfs_relocate_block_group(), the rc is allocated. Then btrfs_relocate_block_group() calls relocate_block_group() prepare_to_relocate() set_reloc_control() that assigns rc to the variable fs_info->reloc_ctl. When prepare_to_relocate() returns, it calls btrfs_commit_transaction() btrfs_start_dirty_block_groups() btrfs_alloc_path() kmem_cache_zalloc() which may fail for example (or other errors could happen). When the failure occurs, btrfs_relocate_block_group() detects the error and frees rc and doesn't set fs_info->reloc_ctl to NULL. After that, in btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and then used, which may cause a use-after-free bug. This possible bug can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag(). To fix this possible bug, in prepare_to_relocate(), check if btrfs_commit_transaction() fails. If the failure occurs, unset_reloc_control() is called to set fs_info->reloc_ctl to NULL. The error log in our fault-injection testing is shown as follows: [ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs] ... [ 58.753577] Call Trace: ... [ 58.755800] kasan_report+0x45/0x60 [ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs] [ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs] [ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs] [ 58.758231] start_transaction+0x896/0x2950 [btrfs] [ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs] [ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs] [ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs] ... [ 58.768510] Allocated by task 23683: [ 58.768777] ____kasan_kmalloc+0xb5/0xf0 [ 58.769069] __kmalloc+0x227/0x3d0 [ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs] [ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs] [ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... [ 58.773337] Freed by task 23683: ... [ 58.774815] kfree+0xda/0x2b0 [ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs] [ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs] [ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ...

In the Linux kernel, the following vulnerability has been resolved: bootconfig: use memblock_free_late to free xbc memory to buddy On the time to free xbc memory in xbc_exit(), memblock may has handed over memory to buddy allocator. So it doesn't make sense to free memory back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86. Following KASAN logs shows this case. This patch fixes the xbc memory free problem by calling memblock_free() in early xbc init error rewind path and calling memblock_free_late() in xbc exit path to free memory to buddy allocator. [ 9.410890] ================================================================== [ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260 [ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1 [ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5 [ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023 [ 9.460789] Call Trace: [ 9.463518] <TASK> [ 9.465859] dump_stack_lvl+0x53/0x70 [ 9.469949] print_report+0xce/0x610 [ 9.473944] ? __virt_addr_valid+0xf5/0x1b0 [ 9.478619] ? memblock_isolate_range+0x12d/0x260 [ 9.483877] kasan_report+0xc6/0x100 [ 9.487870] ? memblock_isolate_range+0x12d/0x260 [ 9.493125] memblock_isolate_range+0x12d/0x260 [ 9.498187] memblock_phys_free+0xb4/0x160 [ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10 [ 9.508021] ? mutex_unlock+0x7e/0xd0 [ 9.512111] ? __pfx_mutex_unlock+0x10/0x10 [ 9.516786] ? kernel_init_freeable+0x2d4/0x430 [ 9.521850] ? __pfx_kernel_init+0x10/0x10 [ 9.526426] xbc_exit+0x17/0x70 [ 9.529935] kernel_init+0x38/0x1e0 [ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30 [ 9.538601] ret_from_fork+0x2c/0x50 [ 9.542596] ? __pfx_kernel_init+0x10/0x10 [ 9.547170] ret_from_fork_asm+0x1a/0x30 [ 9.551552] </TASK> [ 9.555649] The buggy address belongs to the physical page: [ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30 [ 9.570821] flags: 0x200000000000000(node=0|zone=2) [ 9.576271] page_type: 0xffffffff() [ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000 [ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 [ 9.597476] page dumped because: kasan: bad access detected [ 9.605362] Memory state around the buggy address: [ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.634930] ^ [ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.654675] ==================================================================

In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix a UAF bug on the error path of probing When the driver fails in snd_card_register() at probe time, it will free the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug. The following log can reveal it: [ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] [ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0 [ 50.729530] Call Trace: [ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] Fix this by adding usb_kill_urb() before usb_free_urb().

In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts This patch is against CVE-2023-6270. The description of cve is: A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial code is finished. But the net_device ifp will still be used in later tx()->dev_queue_xmit() in kthread. Which means that the dev_put(ifp) should NOT be called in the success path of skb initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into use-after-free because the net_device is freed. This patch removed the dev_put(ifp) in the success path in aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout When the sco connection is established and then, the sco socket is releasing, timeout_work will be scheduled to judge whether the sco disconnection is timeout. The sock will be deallocated later, but it is dereferenced again in sco_sock_timeout. As a result, the use-after-free bugs will happen. The root cause is shown below: Cleanup Thread | Worker Thread sco_sock_release | sco_sock_close | __sco_sock_close | sco_sock_set_timer | schedule_delayed_work | sco_sock_kill | (wait a time) sock_put(sk) //FREE | sco_sock_timeout | sock_hold(sk) //USE The KASAN report triggered by POC is shown below: [ 95.890016] ================================================================== [ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0 [ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7 ... [ 95.890755] Workqueue: events sco_sock_timeout [ 95.890755] Call Trace: [ 95.890755] <TASK> [ 95.890755] dump_stack_lvl+0x45/0x110 [ 95.890755] print_address_description+0x78/0x390 [ 95.890755] print_report+0x11b/0x250 [ 95.890755] ? __virt_addr_valid+0xbe/0xf0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_report+0x139/0x170 [ 95.890755] ? update_load_avg+0xe5/0x9f0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_check_range+0x2c3/0x2e0 [ 95.890755] sco_sock_timeout+0x5e/0x1c0 [ 95.890755] process_one_work+0x561/0xc50 [ 95.890755] worker_thread+0xab2/0x13c0 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] kthread+0x279/0x300 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork+0x34/0x60 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork_asm+0x11/0x20 [ 95.890755] </TASK> [ 95.890755] [ 95.890755] Allocated by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] __kasan_kmalloc+0x86/0x90 [ 95.890755] __kmalloc+0x17f/0x360 [ 95.890755] sk_prot_alloc+0xe1/0x1a0 [ 95.890755] sk_alloc+0x31/0x4e0 [ 95.890755] bt_sock_alloc+0x2b/0x2a0 [ 95.890755] sco_sock_create+0xad/0x320 [ 95.890755] bt_sock_create+0x145/0x320 [ 95.890755] __sock_create+0x2e1/0x650 [ 95.890755] __sys_socket+0xd0/0x280 [ 95.890755] __x64_sys_socket+0x75/0x80 [ 95.890755] do_syscall_64+0xc4/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] Freed by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] kasan_save_free_info+0x40/0x50 [ 95.890755] poison_slab_object+0x118/0x180 [ 95.890755] __kasan_slab_free+0x12/0x30 [ 95.890755] kfree+0xb2/0x240 [ 95.890755] __sk_destruct+0x317/0x410 [ 95.890755] sco_sock_release+0x232/0x280 [ 95.890755] sock_close+0xb2/0x210 [ 95.890755] __fput+0x37f/0x770 [ 95.890755] task_work_run+0x1ae/0x210 [ 95.890755] get_signal+0xe17/0xf70 [ 95.890755] arch_do_signal_or_restart+0x3f/0x520 [ 95.890755] syscall_exit_to_user_mode+0x55/0x120 [ 95.890755] do_syscall_64+0xd1/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] The buggy address belongs to the object at ffff88800c388000 [ 95.890755] which belongs to the cache kmalloc-1k of size 1024 [ 95.890755] The buggy address is located 128 bytes inside of [ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400) [ 95.890755] [ 95.890755] The buggy address belongs to the physical page: [ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388 [ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 95.890755] ano ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table() nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and free the memory.Thus, when nouveau_bo_init() returns an error, the gem object has already been released. Then the call to nouveau_bo_ref() will use the freed "nvbo->bo" and lead to a use-after-free bug. We should delete the call to nouveau_bo_ref() to avoid the use-after-free.