A vulnerability in Cisco Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application. The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability.

Umanni RH 1.0 has a user enumeration vulnerability. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

Dropbear 2011.54 through 2018.76 has an inconsistent failure delay that may lead to revealing valid usernames, a different issue than CVE-2018-15599.

An issue was discovered in Aviatrix Controller before 5.4.1204. There is a Observable Response Discrepancy from the API, which makes it easier to perform user enumeration via brute force.

Citrix XenApp 6.5, when 2FA is enabled, allows a remote unauthenticated attacker to ascertain whether a user exists on the server, because the 2FA error page only occurs after a valid username is entered. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Loway - CWE-204: Observable Response Discrepancy

The private-key operations in ecc.c in wolfSSL before 4.4.0 do not use a constant-time modular inverse when mapping to affine coordinates, aka a "projective coordinates leak."

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

Observable Timing Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. Failed web UI login attempts elicit different responses depending on whether a user account exists. Because the responses indicate whether a submitted username is valid or not, they make it easier to identify legitimate usernames. If a login request is sent to ISAPI/Security/sessionLogin/capabilities using a username that exists, it will return the value of the salt given to that username, even if the password is incorrect. However, if a login request is sent using a username that is not present in the database, it will return an empty salt value. This allows attackers to enumerate legitimate usernames, facilitating brute-force attacks. NOTE: this is different from CVE-2020-7057.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

Observable Discrepancy in GitHub repository healthchecks/healthchecks prior to v2.6.

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

ownCloud Guests before 0.12.5 allows unauthenticated user enumeration via the /apps/guests/register/{email}/{token} endpoint. Because of insufficient validation of the supplied token in showPasswordForm, the server responds differently when an e-mail address corresponds to a valid pending guest user rather than a non-existent user.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

In the Twilio Authy API, accessed by Authy Android before 25.1.0 and Authy iOS before 26.1.0, an unauthenticated endpoint provided access to certain phone-number data, as exploited in the wild in June 2024. Specifically, the endpoint accepted a stream of requests containing phone numbers, and responded with information about whether each phone number was registered with Authy. (Authy accounts were not compromised, however.)

Shenzhen Guoxin Synthesis image system before 8.3.0 allows username enumeration because of the response discrepancy of incorrect versus error.

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application fails to normalize the response times of login attempts performed with wrong usernames with the ones executed with correct usernames. A remote unauthenticated attacker could exploit this side-channel information to perform a username enumeration attack and identify valid usernames.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

Adenza AxiomSL ControllerView through 10.8.1 is vulnerable to user enumeration. An attacker can identify valid usernames on the platform because a failed login attempt produces a different error message when the username is valid.

In Bromite through 78.0.3904.130, there are adblock rules in the release APK; therefore, probing which resources are blocked and which aren't can identify the application version and defeat the User-Agent protection mechanism.

Jenkins Configuration as Code Plugin 1.55 and earlier used a non-constant time comparison function when validating an authentication token allowing attackers to use statistical methods to obtain a valid authentication token.

An issue was discovered in MediaWiki before 1.35.8, 1.36.x and 1.37.x before 1.37.5, and 1.38.x before 1.38.3. HTMLUserTextField exposes the existence of hidden users.

UrBackup Server 2.5.31 allows brute-force enumeration of user accounts because a failure message confirms that a username is not valid.

An issue was discovered in Symfony 4.2.0 to 4.2.11 and 4.3.0 to 4.3.7. The ability to enumerate users was possible due to different handling depending on whether the user existed when making unauthorized attempts to use the switch users functionality. This is related to symfony/security.

_account_forgot_password.ajax.php in MFScripts YetiShare 3.5.2 through 4.5.3 takes a different amount of time to return depending on whether an email address is configured for the account name provided. This can be used by an attacker to enumerate accounts by guessing email addresses.

Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

Jenkins GitHub Plugin 1.34.4 and earlier uses a non-constant time comparison function when checking whether the provided and computed webhook signatures are equal, allowing attackers to use statistical methods to obtain a valid webhook signature.

Fides is an open-source privacy engineering platform. Prior to version 2.44.0, a timing-based username enumeration vulnerability exists in Fides Webserver authentication. This vulnerability allows an unauthenticated attacker to determine the existence of valid usernames by analyzing the time it takes for the server to respond to login requests. The discrepancy in response times between valid and invalid usernames can be leveraged to enumerate users on the system. This vulnerability enables a timing-based username enumeration attack. An attacker can systematically guess and verify which usernames are valid by measuring the server's response time to authentication requests. This information can be used to conduct further attacks on authentication such as password brute-forcing and credential stuffing. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

The Reset Password feature in Pagekit 1.0.17 gives a different response depending on whether the e-mail address of a valid user account is entered, which might make it easier for attackers to enumerate accounts.

The login function of Mealie v1.0.0beta-2 allows attackers to enumerate existing usernames by timing the server's response time.

A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device.

In Talend Administration Center 7.3.1.20200219 before TAC-15950, the Forgot Password feature provides different error messages for invalid reset attempts depending on whether the email address is associated with any account. This allows remote attackers to enumerate accounts via a series of requests.

All CODESYS Visualization versions before V4.2.0.0 generate a login dialog vulnerable to information exposure allowing a remote, unauthenticated attacker to enumerate valid users.

Observable Discrepancy in Packagist snipe/snipe-it prior to v5.3.9.

A vulnerability in Qlik Sense Enterprise on Windows could allow an remote attacker to enumerate domain user accounts. An attacker could exploit this vulnerability by sending authentication requests to an affected system. A successful exploit could allow the attacker to compare the response time that are returned by the affected system to determine which accounts are valid user accounts. Affected systems are only vulnerable if they have LDAP configured. The affected URI is /internal_forms_authentication/ the response time of the form is longer if the supplied user does not exists and shorter if the user exists.

Due to improper authentication mechanism an unauthenticated remote attacker can enumerate valid usernames.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, the Login process allows attackers to check whether a username is valid by reading the HTTP response.

An issue was discovered in eZ Publish Ibexa Kernel before 7.5.15.1. The /user/sessions endpoint can be abused to determine account existence.

In Cibele Thinfinity VirtualUI before 3.0, /changePassword returns different responses for invalid authentication requests depending on whether the username exists.

Thinfinity VirtualUI before 3.0 allows a malicious actor to enumerate users registered in the OS (Windows) through the /changePassword URI. By accessing the vector, an attacker can determine if a username exists thanks to the message returned; it can be presented in different languages according to the configuration of VirtualUI. Common users are administrator, admin, guest and krgtbt.

The password-reset form in ServiceNow Orlando provides different responses to invalid authentication attempts depending on whether the username exists.

A user enumeration vulnerability in MELAG FTP Server 2.2.0.4 allows an attacker to identify valid FTP usernames.

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.