Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.32, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R6900P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8500 before 1.0.2.106, R8300 before 1.0.2.106, and WNDR3400v3 before 1.0.1.16.

An Information Disclosure vulnerability exists in the my config file in NEtGEAR WGR614 v7 and v9, which could let a malicious user recover all previously used passwords on the device, for both the control panel and WEP/WPA/WPA2, in plaintext. This is a different issue than CVE-2012-6340.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6400v2 before 1.0.4.84, R6700v3 before 1.0.4.84, R7000 before 1.0.11.126, R6900P before 1.3.2.126, and R7000P before 1.3.2.126.

An information leak in currentsetting.htm of Netgear R6850 v1.1.0.88 allows attackers to obtain sensitive information without any authentication required.

An information leak in the BRS_top.html component of Netgear R6850 v1.1.0.88 allows attackers to obtain sensitive information without any authentication required.

An information leak in the debuginfo.htm component of Netgear CBR40 2.5.0.28, Netgear CBK40 2.5.0.28, and Netgear CBK43 2.5.0.28 allows attackers to obtain sensitive information without any authentication required.

An exploitable arbitrary memory read vulnerability exists in the KCodes NetUSB.ko kernel module which enables the ReadySHARE Printer functionality of at least two NETGEAR Nighthawk Routers and potentially several other vendors/products. A specially crafted index value can cause an invalid memory read, resulting in a denial of service or remote information disclosure. An unauthenticated attacker can send a crafted packet on the local network to trigger this vulnerability.

A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of the file /debuginfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253382 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NETGEAR MR1100 devices before 12.06.08.00 are affected by disclosure of administrative credentials.

A low-privileged OS user with access to a Windows host where NETGEAR ProSAFE Network Management System is installed can create arbitrary JSP files in a Tomcat web application directory. The user can then execute the JSP files under the security context of SYSTEM.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

NETGEAR GS810EMX devices before 1.0.0.5 are affected by disclosure of sensitive information.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

An information leak in the currentsetting.htm component of Netgear CBR40 2.5.0.28, Netgear CBK40 2.5.0.28, and Netgear CBK43 2.5.0.28 allows attackers to obtain sensitive information without any authentication required.

A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /currentsetting.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR R7450 1.2.0.62_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SOAP API endpoint, which listens on TCP port 80 by default. The issue results from the lack of proper access control. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-11559.

The password-recovery feature on NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier allows remote attackers to discover the cleartext administrator password by reading the cgi-bin/passrec.asp HTML source code.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects R6400 before 1.0.1.24, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6250 before V1.0.4.8, R6400 before V1.0.1.22, R6400v2 before V1.0.2.32, R7100LG before V1.0.0.32, R7300 before V1.0.0.52, R8300 before V1.0.2.94, R8500 before V1.0.2.100, D6220 before V1.0.0.28, D6400 before V1.0.0.60, and D8500 before V1.0.3.29.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.94.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.40, D6400 before 1.0.0.74, D7000 before 1.0.1.60, D7800 before 1.0.1.34, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.94, DGN2200Bv4 before 1.0.0.94, EX6200v2 before 1.0.1.50, EX7000 before 1.0.0.56, JR6150 before 1.0.1.18, R6050 before 1.0.1.10J, R6100 before 1.0.1.16, R6150 before 1.0.1.10, R6220 before 1.1.0.50, R6250 before 1.0.4.12, R6300v2 before 1.0.4.12, R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.26, R6700v2 before 1.2.0.4, R6800 before 1.0.1.10, R6900 before 1.0.1.26, R6900P before 1.0.0.58, R6900v2 before 1.2.0.4, R7000 before 1.0.9.6, R7000P before 1.0.0.58, R7100LG before 1.0.0.32, R7300 before 1.0.0.54, R7500 before 1.0.0.112, R7500v2 before 1.0.3.20, R7800 before 1.0.2.36, R7900 before 1.0.1.18, R8000 before 1.0.3.48, R8300 before 1.0.2.104, R8500 before 1.0.2.104, R9000 before 1.0.2.40, WNDR3400v3 before 1.0.1.14, WNDR3700v4 before 1.0.2.96, WNDR4300v1 before 1.0.2.98, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, and WNR3500Lv2 before 1.2.0.44.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6700 before 1.0.1.26, R7000 before 1.0.9.10, R7100LG before 1.0.0.32, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R8300 before 1.0.2.106 and R8500 before 1.0.2.106.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of URLs. The issue results from the lack of proper routing of URLs. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-9618.

NETGEAR ProSafe GS724Tv3 and GS716Tv2 with firmware 5.4.1.13 and earlier; GS748Tv4 with firmware 5.4.1.14; GS510TP with firmware 5.4.0.6; GS752TPS, GS728TPS, GS728TS, and GS725TS with firmware 5.3.0.17; and GS752TXS and GS728TXS with firmware 6.1.0.12 allows remote attackers to read encrypted administrator credentials and other startup configurations via a direct request to filesystem/startup-config.

An information leak in debuginfo.htm of Netgear R6850 v1.1.0.88 allows attackers to obtain sensitive information without any authentication required.

The web portal interface in Citrix Access Gateway (aka Citrix Advanced Access Control) before Advanced Edition 4.5 HF1 places a session ID in the URL, which allows context-dependent attackers to hijack sessions by reading "residual information", including the a referer log, browser history, or browser cache.

A Disclosure of Sensitive Information vulnerability in HPE SiteScope version v11.2x, v11.3x was found.

CA Identity Manager r12.6 to r12.6 SP8, 14.0, and 14.1 allows remote attackers to potentially identify passwords of locked accounts through an exhaustive search.

IBM Flex System Manager (FSM) 1.1 through 1.3 before 1.3.2.0 allows remote attackers to enumerate user accounts via unspecified vectors.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to compute password-of-the-day values via unspecified vectors.

If a specific sequence of actions is performed when opening a new tab, the triggering principal associated with the new tab may have been incorrect. The triggering principal is used to calculate many values, including the `Referer` and `Sec-*` headers, meaning there is the potential for incorrect security checks within the browser in addition to incorrect or misleading information sent to remote websites. *This bug only affects Firefox for Android. Other versions of Firefox are unaffected.* This vulnerability affects Firefox < 127.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not include the HTTPOnly flag in a Set-Cookie header for administration applications, which makes it easier for remote attackers to obtain potentially sensitive information via script access to cookies.

Microsoft SQL Server Analysis Services in Microsoft SQL Server 2012, Microsoft SQL Server 2014, and Microsoft SQL Server 2016 allows an information disclosure vulnerability when it improperly enforces permissions, aka "Microsoft SQL Server Analysis Services Information Disclosure Vulnerability".

The login function in Softaculous Webuzo before 2.1.4 provides different error messages for invalid authentication attempts depending on whether the user account exists, which allows remote attackers to enumerate usernames via a series of requests.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover a CM MAC address by sniffing Wi-Fi traffic and performing simple arithmetic calculations.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not set the secure flag for cookies in an https session to an administration application, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.

IDM 4.6 Identity Applications prior to 4.6.2.1 may expose sensitive information.

Emerson Dixell XWEB-500 products are affected by information disclosure via directory listing. A potential attacker can use this misconfiguration to access all the files in the remote directories. Note: the product has not been supported since 2018 and should be removed or replaced

The Google News and Weather application before 3.3.1 for Android allows remote attackers to read OAuth tokens by sniffing the network and leveraging the lack of SSL.

A Remote Disclosure of Information vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P2 was found.

Karotz API 12.07.19.00: Session Token Information Disclosure

Limited plaintext disclosure exists in PRIMX Zed Entreprise for Windows before 6.1.2240, Zed Entreprise for Windows (ANSSI qualification submission) before 6.1.2150, Zed Entreprise for Mac before 2.0.199, Zed Entreprise for Linux before 2.0.199, Zed Pro for Windows before 1.0.195, Zed Pro for Mac before 1.0.199, Zed Pro for Linux before 1.0.199, Zed Free for Windows before 1.0.195, Zed Free for Mac before 1.0.199, and Zed Free for Linux before 1.0.199. Analyzing a Zed container can lead to the disclosure of plaintext content of very small files (a few bytes) stored into it.

Zulip server provides an open-source team chat that helps teams stay productive and focused. Zulip Server 7.0 and above are vulnerable to an information disclose attack, where, if a Zulip server is hosting multiple organizations, an unauthenticated user can make a request and determine if an email address is in use by a user. Zulip Server 9.4 resolves the issue, as does the `main` branch of Zulip Server. Users are advised to upgrade. There are no known workarounds for this issue.

Some NetIQ Identity Manager Applications before Identity Manager 4.5.6.1 included the session token in GET URLs, potentially allowing exposure of user sessions to untrusted third parties via proxies, referer urls or similar.

A remote unauthenticated disclosure of information vulnerability in HPE Matrix Operating Environment version 7.6 LR1 was found.

An information disclosure vulnerability in the BlackBerry Workspaces Server could result in an attacker gaining access to source code for server-side applications by crafting a request for specific files.

An information-leakage issue was discovered on Mimosa Client Radios before 2.2.3 and Mimosa Backhaul Radios before 2.2.3. There is a page in the web interface that will show you the device's serial number, regardless of whether or not you have logged in. This information-leakage issue is relevant because there is another page (accessible without any authentication) that allows you to remotely factory reset the device simply by entering the serial number.