WS-WN572HP3 V230525 was discovered to contain a buffer overflow in the component /www/cgi-bin/upload.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

An exploitable denial of service vulnerability exists in the ENIP Request Path Data Segment functionality of Allen-Bradley Flex IO 1794-AENT/B. A specially crafted network request can cause a loss of communications with the device resulting in denial-of-service. An attacker can send a malicious packet to trigger this vulnerability.If the Simple Segment Sub-Type is supplied, the device treats the byte following as the Data Size in words. When this value represents a size greater than what remains in the packet data, the device enters a fault state where communication with the device is lost and a physical power cycle is required.

A vulnerability was found in PCMan FTP Server 2.0.7 and classified as problematic. This issue affects some unknown processing of the component STOR Command Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-251555.

A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as problematic. This vulnerability affects unknown code of the component PUT Command Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251554 is the identifier assigned to this vulnerability.

Vulnerability exists in SCI IEC 60870-5-104 and HCI IEC 60870-5-104 that affects the RTU500 series product versions listed below. Specially crafted messages sent to the mentioned components are not validated properly and can result in buffer overflow and as final consequence to a reboot of an RTU500 CMU.

D-LINK DIR-815 v1.01 was discovered to contain a buffer overflow via the component /web/captcha.cgi.

ShareAlarmPro contains a denial of service vulnerability that allows attackers to crash the application by supplying an oversized registration key. Attackers can generate a 1000-character buffer payload to trigger an application crash when pasted into the registration key field.

SpotDialup 1.6.7 contains a denial of service vulnerability in the registration name input field that allows attackers to crash the application. Attackers can generate a 1000-character buffer payload and paste it into the 'Name' field to trigger an application crash.

SICK FX0-GPNT00000 and FX0-GENT00000 devices through 3.4.0 have a Buffer Overflow

TCPServer.cpp in SimpleNetwork through 29bc615 has an off-by-one error that causes a buffer overflow when trying to add '\0' to the end of long msg data. It can be exploited via crafted TCP packets.

Buffer Overflow vulnerability in the nomath() function in Mathtex v.1.05 and before allows a remote attacker to cause a denial of service via a crafted string in the application URL.

Buffer Overflow vulnerability in the main() function in Mathtex 1.05 and before allows a remote attacker to cause a denial of service when using \convertpath.

When BIG-IP APM Access Profile is configured on a virtual server, undisclosed request can cause TMM to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Out-of-bounds read vulnerability in the smart activity recognition module.Successful exploitation of this vulnerability may cause features to perform abnormally.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly. These vulnerabilities exist because HTTP packets are not properly checked for errors. An attacker could exploit this vulnerability by sending a crafted HTTP packet to the remote interface of an affected device. A successful exploit could allow the attacker to cause a DoS condition on the device.

A buffer overflow in websockets in UnrealIRCd 6.1.0 through 6.1.3 before 6.1.4 allows an unauthenticated remote attacker to crash the server by sending an oversized packet (if a websocket port is open). Remote code execution might be possible on some uncommon, older platforms.

Buffer Overflow vulnerability in Tenda i29 versions 1.0 V1.0.0.5 and 1.0 V1.0.0.2, allows remote attackers to cause a denial of service (DoS) via the pingIp parameter in the pingSet function.

ClickHouse is an open-source column-oriented database management system that allows generating analytical data reports in real-time. A heap buffer overflow issue was discovered in ClickHouse server. An attacker could send a specially crafted payload to the native interface exposed by default on port 9000/tcp, triggering a bug in the decompression logic of Gorilla codec that crashes the ClickHouse server process. This attack does not require authentication. This issue has been addressed in ClickHouse Cloud version 23.9.2.47551 and ClickHouse versions 23.10.5.20, 23.3.18.15, 23.8.8.20, and 23.9.6.20.

Buffer Overflow vulnerability in free5gc 3.3.0, UPF 1.2.0, and SMF 1.2.0 allows attackers to cause a denial of service via crafted PFCP messages.

Buffer Overflow vulnerability in free5gc 3.3.0 allows attackers to cause a denial of service via crafted PFCP messages whose Sequence Number is mutated to overflow bytes.

An issue was discovered in Stormshield Network Security (SNS) SNS 4.3.13 through 4.3.22 before 4.3.23, SNS 4.6.0 through 4.6.9 before 4.6.10, and SNS 4.7.0 through 4.7.1 before 4.7.2. An attacker can overflow the cookie threshold, making an IPsec connection impossible.

A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp and 4004/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.

A Buffer Overflow vulnerability in Tenda AC500 v.2.0.1.9 allows a remote attacker to cause a denial of service via the port parameter at the goform/setVlanInfo component.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the TXPower parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the CurrentPassword parameter in the CheckPasswdSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the SSID parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Password parameter in the SetWanSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Type parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the AdminPassword parameter in the SetDeviceSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the StartTime parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Buffer overflow in NetRxPkt::ehdr_buf in hw/net/net_rx_pkt.c in QEMU (aka Quick Emulator), when the VLANSTRIP feature is enabled on the vmxnet3 device, allows remote attackers to cause a denial of service (out-of-bounds access and QEMU process crash) via vectors related to VLAN stripping.

** UNSUPPORTED WHEN ASSIGNED **The buffer overflow vulnerability in the Zyxel PMG2005-T20B firmware version V1.00(ABNK.2)b11_C0 could allow an unauthenticated attacker to cause a denial of service condition via a crafted uid.

TOTOLINK A3002R TOTOLINK-A3002R-He-V1.1.1-B20200824.0128 is vulnerable to Buffer Overflow via /bin/boa.

A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed a malicious certificate or for an application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address in a certificate to overflow an arbitrary number of bytes containing the `.' character (decimal 46) on the stack. This buffer overflow could result in a crash (causing a denial of service). In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects.

engine.c in slaacd in OpenBSD 6.9 and 7.0 before 2022-02-21 has a buffer overflow triggerable by an IPv6 router advertisement with more than seven nameservers. NOTE: privilege separation and pledge can prevent exploitation.

Tenda V15V1.0 V15.11.0.14(1521_3190_1058) was discovered to contain a buffer overflow vulnerability via the picName parameter in the formDelWewifiPi function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

D-Link DIR820LA1_FW106B02 was discovered to contain a buffer overflow via the nextPage parameter at ping.ccp.

D-Link Wireless AC1200 Dual Band VDSL ADSL Modem Router DSL-3782 Firmware v1.01 allows unauthenticated attackers to cause a Denial of Service (DoS) via the User parameter or Pwd parameter to Login.asp.

Buffer Overflow vulnerability found in Liblouis v.3.24.0 allows a remote attacker to cause a denial of service via the lou_logFile function at logginc.c endpoint.

Rhonabwy before v1.1.5 was discovered to contain a buffer overflow via the component r_jwe_aesgcm_key_unwrap. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted JWE token.

Vapor is a server-side Swift HTTP web framework. When using automatic content decoding an attacker can craft a request body that can make the server crash with the following request: `curl -d "array[_0][0][array][_0][0][array]$(for f in $(seq 1100); do echo -n '[_0][0][array]'; done)[string][_0]=hello%20world" http://localhost:8080/foo`. The issue is unbounded, attacker controlled stack growth which will at some point lead to a stack overflow and a process crash. This issue has been fixed in version 4.61.1.

An unauthenticated attacker can send a specially crafted unauthenticated HTTP request to the device that can overflow a buffer. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.29. The overflowed data leads to segmentation fault and ultimately a denial-of-service condition, causing the device to reboot. The impact of this vulnerability is that an unauthenticated attacker could leverage this flaw to cause the target device to become unresponsive. An attacker could automate this attack to achieve persistent DoS, effectively rendering the target controller useless.

D-Link DIR-1960 firmware DIR-1960_A1_1.11 was discovered to contain a buffer overflow via srtcat in prog.cgi. This vulnerability allowed attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

A vulnerability has been found in Tenda TX3 16.03.13.11_multi and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

GOST engine is a reference implementation of the Russian GOST crypto algorithms for OpenSSL. TLS clients using GOST engine when ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is agreed and the server uses 512 bit GOST secret keys are vulnerable to buffer overflow. GOST engine version 3.0.1 contains a patch for this issue. Disabling ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is a possible workaround.

A vulnerability classified as critical has been found in Tenda TX3 16.03.13.11_multi. This affects an unknown part of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Tenda AC10-1200 v15.03.06.23_EN was discovered to contain a buffer overflow in the setSmartPowerManagement function.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the GET parameter XNo of incoming HTTP requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.