An unauthenticated attacker could arbitrarily upload firmware files to the target device, ultimately causing a Denial-of-Service (DoS). This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.302 for the LP series and 1.296 for the EP series. The attacker needs to have a properly signed and encrypted binary, loading the firmware to the device ultimately triggers a reboot.

An unauthenticated attacker can send a specially crafted network packet to delete a user from the web interface. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.29. The impact of this vulnerability is that an unauthenticated attacker could restrict access to the web interface to legitimate users and potentially requiring them to use the default user dip switch procedure to gain access back.

An unauthenticated attacker can send a specially crafted update file to the device that can overflow a buffer. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.302 for the LP series and 1.296 for the EP series. The overflowed data can allow the attacker to manipulate the “normal” code execution to that of their choosing. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable.

An issue was discovered in Nsasoft US LLC SpotAuditor 5.3.5. The program can be crashed by entering 300 bytes char data into the "Key" or "Name" field while registering.

A vulnerability classified as critical has been found in TOTOLINK X15 up to 1.0.0-B20230714.1105. Affected is an unknown function of the file /boafrm/formParentControl of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Buffer Overflow in TP-Link WR2041 v1 firmware for the TL-WR2041+ router allows remote attackers to cause a Denial-of-Service (DoS) by sending an HTTP request with a very long "ssid" parameter to the "/userRpm/popupSiteSurveyRpm.html" webpage, which crashes the router.

A buffer overflow vulnerability in the AT command interface of Gigaset DX600A v41.00-175 devices allows remote attackers to force a device reboot by sending relatively long AT commands.

A Buffer overflow vulnerability on Fanvil x210 2.12.20 devices allows attackers to cause a denial of service or potentially execute arbitrary commands via crafted POST request to the /cgi-bin/webconfig?page=upload&action=submit endpoint.

Buffer Overflow vulnerability in free5gc 3.3.0, UPF 1.2.0, and SMF 1.2.0 allows attackers to cause a denial of service via crafted PFCP messages.

free5gc v4.1.0 and before is vulnerable to Buffer Overflow. When AMF receives an UplinkRANConfigurationTransfer NGAP message from a gNB, the AMF process crashes.

A vulnerability was found in TOTOLINK A702R, A3002R, A3002RU and EX1200T 3.0.0-B20230809.1615/4.0.0-B20230531.1404/4.0.0-B20230721.1521/4.1.2cu.5232_B20210713. It has been classified as critical. Affected is an unknown function of the file /boafrm/formIPv6Addr of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

DBI versions before 1.648 for Perl saved errors in a limited-sized buffer. Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit. Attackers that can influence the error text in an application can trigger a buffer overflow.

** UNSUPPORTED WHEN ASSIGNED ** A buffer overflow vulnerability in the formWep(), formWlAc(), formPasswordSetup(), formUpgradeCert(), and formDelcert() functions of the “webs” binary in Zyxel NWA1100-N customized firmware version 1.00(AACE.1)C0 could allow an attacker to trigger a denial-of-service (DoS) condition by sending a crafted HTTP request to a vulnerable device.

Multiple buffer overflows in the SetClientState function of Tenda AC6 v.15.03.06.50 allows attackers to cause a Denial of Service (DoS) via injecting a crafted payload into the limitSpeed, deviceId, and limitSpeedUp parameters.

igmpproxy 0.4 before commit 2b30c36 allows remote attackers to cause a denial of service (application crash) via a crafted IGMPv3 membership report packet with a malicious source address. Due to insufficient validation in the `recv_igmp()` function in src/igmpproxy.c, an invalid group record type can trigger a NULL pointer dereference when logging the address using `inet_fmtsrc()`. This vulnerability can be exploited by sending malformed multicast traffic to a host running igmpproxy, leading to a crash. igmpproxy is used in various embedded networking environments and consumer-grade IoT devices (such as home routers and media gateways) to handle multicast traffic for IPTV and other streaming services. Affected devices that rely on unpatched versions of igmpproxy may be vulnerable to remote denial-of-service attacks across a LAN .

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could result in denial of service, due to missing length check on user-supplied data from a constructed message received on the network. Affected Product: Interactive Graphical SCADA System Data Collector (dc.exe) (V15.0.0.21320 and prior)

libvncclient/sockets.c in LibVNCServer before 0.9.13 has a buffer overflow via a long socket filename.

Buffer Overflow vulnerability in B&R Automation Runtime webserver allows an unauthenticated network-based attacker to stop the cyclic program on the device and cause a denial of service.

libsmb2 6.2+ is vulnerable to Buffer Overflow. When processing SMB2 chained PDUs (NextCommand), libsmb2 repeatedly calls smb2_add_iovector() to append to a fixed-size iovec array without checking the upper bound of v->niov (SMB2_MAX_VECTORS=256). An attacker can craft responses with many chained PDUs to overflow v->niov and perform heap out-of-bounds writes, causing memory corruption, crashes, and potentially arbitrary code execution. The SMB2_OPLOCK_BREAK path bypasses message ID validation.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

A buffer overflow vulnerability in SonicOS allows a remote attacker to cause a Denial of Service (DoS) by sending a specially crafted request. This vulnerability affects SonicOS Gen5, Gen6, Gen7 platforms, and SonicOSv virtual firewalls.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromAdvSetMacMtuWan function via the serverName parameter.

Possible buffer overflow due to lack of length check in BA request in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromSetSysTime function via the ntpServer parameter.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_APC.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N v11, TL-WR842ND v2 and TL-WR494N v3. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

When an iRule using an ILX::call command is configured on a virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1, specifically in the handling of the wans parameter in the qos.asp endpoint.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_0046f984 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_advanced_set in the payload, which can cause the program to crash and lead to a Denial of Service (DoS) attack.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the Function_00465620 of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of specify_parame in the payload, which can cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

An issue in D-Link DI-8003 16.07.26A1 related to improper handling of the id parameter in the /saveparm_usb.asp endpoint.

An unauthenticated buffer overflow vulnerability exists in IEEE8021x_upload.cgi in GeoVision GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by insufficient bounds checking when parsing filename values in multipart upload data. A remote attacker may exploit this vulnerability by sending a crafted upload request with overly long input, causing memory corruption and resulting in a denial of service.

An exploitable denial of service vulnerability exists in the ENIP Request Path Network Segment functionality of Allen-Bradley Flex IO 1794-AENT/B 4.003. A specially crafted network request can cause a loss of communications with the device resulting in denial-of-service. An attacker can send a malicious packet to trigger this vulnerability.

A buffer overflow vulnerability has been discovered in the Netis WF2880 v2.1.40207 in the FUN_004743f8 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_sec_set in the payload, which may cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to inadequate input validation in the /tggl.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the s parameter in the /web_list_opt.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 and DI-8003G 19.12.10A1 due to improper handling of the wan_ping parameter in the /wan_ping.asp endpoint.

Classic buffer overflow in SolarWinds Dameware allows a remote, unauthenticated attacker to cause a denial of service by sending a large 'SigPubkeyLen' during ECDH key exchange.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper validation of the id parameter in the /thd_member.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the http_lanport parameter in the /webgl.asp endpoint.

A vulnerability in SonicOS allows a remote unauthenticated attacker to cause Denial of Service due to buffer overflow, which leads to a firewall crash. This vulnerability affected SonicOS Gen 6 version 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version 7.0.0.0.