The WAVLINK Quantum D4G (WN531G3) running firmware version M31G3.V5030.200325 uses IP addresses to hold sessions and does not not use session tokens. Therefore, if an attacker changes their IP address to match the logged-in administrator's, or is behind the same NAT as the logged in administrator, session takeover is possible.

A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. It has been classified as critical. Affected is the function Goto_chidx of the file login.cgi of the component Front-End Authentication Page. The manipulation of the argument wlanUrl leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A remote buffer overflow vulnerability in the /cgi-bin/makeRequest.cgi endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to execute arbitrary machine instructions as root without authentication.

Multiple buffer overflow vulnerabilities in Wavlink WL-WN575A3 RPT75A3.V4300, which are caused by not performing strict length checks on user-controlled data. By successfully exploiting the vulnerabilities, attackers can crash the remote devices or execute arbitrary commands without any authorization verification.

An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple buffer overflow vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges. (The set of affected scripts is similar to CVE-2020-12266.)

Multiple buffer overflow vulnerabilities exist in the internet.cgi set_qos() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability exists in the `en_enable` POST parameter.

Multiple buffer overflow vulnerabilities exist in the internet.cgi set_qos() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability exists in the `cli_mac` POST parameter.

Multiple buffer overflow vulnerabilities exist in the internet.cgi set_qos() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability exists in the `cli_name` POST parameter.

Multiple buffer overflow vulnerabilities exist in the qos.cgi qos_settings() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A buffer overflow vulnerability exists in the `qos_dat` POST parameter.

Multiple buffer overflow vulnerabilities exist in the qos.cgi qos_settings() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A buffer overflow vulnerability exists in the `sel_mode` POST parameter.

Multiple buffer overflow vulnerabilities exist in the qos.cgi qos_settings() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A buffer overflow vulnerability exists in the `qos_bandwidth` POST parameter.

A buffer overflow vulnerability exists in the adm.cgi rep_as_router() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the adm.cgi set_sys_adm() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the internet.cgi set_add_routing() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An arbitrary code execution vulnerability exists in the adm.cgi set_MeshAp() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the adm.cgi set_wzdgw4G() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the adm.cgi set_wzap() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the qos.cgi qos_sta_settings() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the adm.cgi rep_as_bridge() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the adm.cgi set_TR069() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the usbip.cgi set_info() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A buffer overflow vulnerability exists in the login.cgi Goto_chidx() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

A buffer overflow in os/net/mac/ble/ble-l2cap.c in the BLE stack in Contiki-NG 4.4 and earlier allows an attacker to execute arbitrary code via malicious L2CAP frames.

Cerner medico 26.00 has a Local Buffer Overflow (issue 3 of 3).

u'Buffer overflow while processing a crafted PDU data packet in bluetooth due to lack of check of buffer size before copying' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, QCN7606, SA415M, SA515M, SA6155P, SA8155P, SC8180X, SDX55

Cerner medico 26.00 has a Local Buffer Overflow (issue 2 of 3).

Cerner medico 26.00 has a Local Buffer Overflow (issue 1 of 3).

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects R6220 before V1.1.0.50, R7800 before V1.0.2.36, WNDR3400v3 before 1.0.1.14, and WNDR3700v5 before V1.1.0.48.

A vulnerability was identified in D-Link DIR-825 3.00b32. This affects the function NMBD_process of the file sserver.c of the component nmbd. Such manipulation leads to buffer overflow. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

Huawei smart phones with earlier versions than ELLE-AL00B 9.1.0.222(C00E220R2P1) have a buffer overflow vulnerability. An attacker may intercept and tamper with the packet in the local area network (LAN) to exploit this vulnerability. Successful exploitation may cause the affected phone abnormal.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects R6250 before 1.0.4.12, R6300v2 before 1.0.4.12, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000 before 1.0.9.4, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.74.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000 before 1.0.9.4, R7000P before 1.0.0.56, R6900P before 1.0.0.56, R7100LG before 1.0.0.32, R7300 before 1.0.0.54, R7900 before 1.0.1.18, R8300 before 1.0.2.104, and R8500 before 1.0.2.104.

In wlan AP driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00415809; Issue ID: MSV-3405.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Ariel Harush and Roy Hodir from OTORIO have found a flaw in the AXIS A1001 when communicating over OSDP. A heap-based buffer overflow was found in the pacsiod process which is handling the OSDP communication allowing to write outside of the allocated buffer. By appending invalid data to an OSDP message it was possible to write data beyond the heap allocated buffer. The data written outside the buffer could be used to execute arbitrary code.  lease refer to the Axis security advisory for more information, mitigation and affected products and software versions.

Heap out-of-bound write vulnerability in Exynos baseband prior to SMR Jun-2023 Release 1 allows remote attacker to execute arbitrary code.

usb device bluetooth class includes a buffer overflow related to implementation of net_buf_add_mem.

The DEF CON 27 badge allows remote attackers to exploit a buffer overflow by sending an oversized packet via the NFMI (Near Field Magnetic Induction) protocol.

A Buffer Overflow vulnerability in the RSTP server component of Eufy Indoor 2K Indoor Camera allows a local attacker to achieve remote code execution. This issue affects: Eufy Indoor 2K Indoor Camera 2.0.9.3 version and prior versions.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business 220 Series Smart Switches. An unauthenticated, adjacent attacker could perform the following: Execute code on the affected device or cause it to reload unexpectedly Cause LLDP database corruption on the affected device For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released firmware updates that address these vulnerabilities.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business 220 Series Smart Switches. An unauthenticated, adjacent attacker could perform the following: Execute code on the affected device or cause it to reload unexpectedly Cause LLDP database corruption on the affected device For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released firmware updates that address these vulnerabilities.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12066.

Buffer Overflow vulnerability in Tenda AC9 V1.0 through V15.03.05.19(6318), and AC9 V3.0 V15.03.06.42_multi, allows attackers to execute arbitrary code via the urls parameter.

Buffer Overflow vulnerability in Tenda AC9 V1.0 through V15.03.05.19(6318), and AC9 V3.0 V15.03.06.42_multi, allows attackers to execute arbitrary code via the index parameter.

u'Buffer overflow while processing PDU packet in bluetooth due to lack of check of buffer length before copying into it.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, QCN7606, SA415M, SA515M, SA6155P, SA8155P, SC8180X, SDX55

Tenda AC18 V15.03.05.19 was discovered to contain a stack overflow via the funcpara1 parameter in the formSetCfm function.

Buffer Overflow vulnerability in D-Link DSR-150, DSR-150N, DSR-250, DSR-250N, DSR-500N, DSR-1000N from 3.13 to 3.17B901C allows unauthenticated users to execute remote code execution.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.40, R6080 before 1.0.0.40, R6050 before 1.0.1.18, R6120 before 1.0.0.48, R6220 before 1.1.0.86, R6260 before 1.1.0.64, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, and WNR2020 before 1.1.0.62.

Actiontec WCB6200Q uh_tcp_recv_header Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21414.

Actiontec WCB6200Q uh_tcp_recv_content Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21410.