An information disclosure vulnerability exists in the web interface /cgi-bin/debug_dump.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to a disclosure of sensitive information. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

A vulnerability in the Local Packet Transport Services (LPTS) programming of the SNMP with the management plane protection feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to allow connections despite the management plane protection that is configured to deny access to the SNMP server of an affected device. This vulnerability is due to incorrect LPTS programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by connecting to an affected device using SNMP. A successful exploit could allow the attacker to connect to the device on the configured SNMP ports. Valid credentials are required to execute any of the SNMP requests.

BD Alaris Gateway versions, 1.0.13,1.1.3 Build 10,1.1.3 MR Build 11,1.1.5, and 1.1.6, The web browser user interface on the Alaris Gateway Workstation does not prevent an attacker with knowledge of the IP address of the Alaris Gateway Workstation terminal to gain access to the status and configuration information of the device.

A vulnerability was found in Exrick xboot up to 3.3.4. It has been classified as problematic. This affects an unknown part of the component Spring Boot Admin/Spring Actuator. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Instances of UniFi Network Application that (i) are run on a UniFi Gateway Console, and (ii) are versions 7.5.176. and earlier, implement device adoption with improper access control logic, creating a risk of access to device configuration information by a malicious actor with preexisting access to the network. Affected Products: UDM UDM-PRO UDM-SE UDR UDW Mitigation: Update UniFi Network to Version 7.5.187 or later.

A vulnerability has been found in zlt2000 microservices-platform up to 6.0.0 and classified as problematic. This vulnerability affects unknown code of the file /actuator of the component Spring Actuator Interface. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link R15 before v1.08.02 was discovered to contain no firewall restrictions for IPv6 traffic. This allows attackers to arbitrarily access any services running on the device that may be inadvertently listening via IPv6.

A security vulnerability has been detected in YiFang CMS up to 2.0.5. Affected by this vulnerability is the function exportInstallTable of the file app/utils/base/database/Migrate.php. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. This issue affects the function bs_GetManPwd in the library libblinkapi.so of the file /cgi-bin/lighttpd.cgi. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC3600 up to 1.0.22. This affects the function geteasycfg of the file /cgi-bin/lighttpd.cgi of the component Web Management Interface. The manipulation of the argument Password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Metasoft 美特软件 MetaCRM up to 6.4.2. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /env.jsp. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. This vulnerability affects the function bs_GetHostInfo in the library libblinkapi.so of the file /cgi-bin/lighttpd.cgi. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The DocCheck Login plugin for WordPress is vulnerable to unauthorized post access in all versions up to, and including, 1.1.5. This is due to plugin redirecting a user to login on a password protected post after the page has loaded. This makes it possible for unauthenticated attackers to read posts they should not have access to.

An Insecure Direct Object Reference (IDOR) vulnerability in Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 allows unauthorized attackers to access the Admin-only settings and edit the session storage.

SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. In versions 7.14.6 and 8.8.0, the broken authentication in the legacy iCal service allows unauthenticated access to meeting data. An unauthenticated actor can view any user's meeting (calendar event) data given their username, related functionality allows user enumeration. This is fixed in versions 7.14.7 and 8.8.1.

Incorrect access control in the component \controller\SupplierController.java of jshERP v3.5 allows unauthorized attackers to arbitrarily modify the supplier status under any account.

Incorrect access control in the component /controller/PersonController.java of jshERP v3.5 allows unauthorized attackers to obtain all the information of the handler by executing the getAllList method.

A vulnerability was found in Multilaser Sirius RE016 MLT1.0. It has been rated as problematic. This issue affects some unknown processing of the file /cgi-bin/cstecgi.cgi. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Incorrect access control in the component \controller\UserController.java of jshERP v3.5 allows attackers to arbitrarily reset user account passwords and execute a horizontal privilege escalation attack.

Incorrect Access Control in the AJAX endpoint functionality in jonkastonka Cookies and Content Security Policy plugin through version 2.29 allows remote attackers to cause a denial of service (database server resource exhaustion) via unlimited database write operations to the wp_ajax_nopriv_cacsp_insert_consent_data endpoint.

EzGED3 3.5.0 contains an unauthenticated arbitrary file read vulnerability due to improper access control and insufficient input validation in a script exposed via the web interface. A remote attacker can supply a crafted path parameter to a PHP script to read arbitrary files from the filesystem. The script lacks both authentication checks and secure path handling, allowing directory traversal attacks (e.g., ../../../) to access sensitive files such as configuration files, database dumps, source code, and password reset tokens. If phpMyAdmin is exposed, extracted credentials can be used for direct administrative access. In environments without such tools, attacker-controlled file reads still allow full database extraction by targeting raw MySQL data files. The vendor states that the issue is fixed in 3.5.72.27183.

A vulnerability has been found in Netgear DGND3700 1.1.00.15_1.00.15NA and classified as problematic. This vulnerability affects unknown code of the file /currentsetting.htm of the component mini_http. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

A security issue has been identified in Appian Enterprise Business Process Management version 25.3. The vulnerability is related to incorrect access control, which under certain conditions could allow unauthorized access to information.

A vulnerability, which was classified as problematic, has been found in Netgear DGND3700 1.1.00.15_1.00.15NA. Affected by this issue is some unknown functionality of the file /BRS_top.html. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

A vulnerability, which was classified as problematic, was found in yangshare 技术杨工 warehouseManager 仓库管理系统 1.0. This affects an unknown part. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as problematic, has been found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected by this issue is the function sub_48F4F0 of the file /H5/versionupdate.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. This vulnerability affects the function sub_41F0FC of the file /H5/webgl.data. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the Task API endpoint of the ctrlX OS setup mechanism allowed a remote, unauthenticated attacker to access and extract internal application data, including potential debug logs and the version of installed apps.

A vulnerability was found in itwanger paicoding 1.0.3 and classified as problematic. Affected by this issue is some unknown functionality of the file /user/home?userId=1&homeSelectType=read of the component Browsing History Handler. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, has been found in D-Link DI-7003GV2 24.04.18D1 R(68125). This issue affects some unknown processing of the file /H5/get_version.data of the component Configuration Handler. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this issue is some unknown functionality of the file /login.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, was found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected is an unknown function of the file /index.data. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /install_base.data. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Gosuncn Technology Group Audio-Visual Integrated Management Platform 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /sysmgr/user/listByPage. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as problematic, was found in Gosuncn Technology Group Audio-Visual Integrated Management Platform 4.0. Affected is an unknown function of the file /config/config.properties of the component Configuration File Handler. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Incorrect access control in Xinference before v1.4.0 allows attackers to access the Web GUI without authentication.

An issue was discovered in CommScope Ruckus Unleashed prior to 200.15.6.212.14 and 200.17.7.0.139 and in Ruckus ZoneDirector prior to 10.5.1.0.279, where hard-coded credentials for the ftpuser account provide FTP access to the controller, enabling a remote attacker to upload or retrieve arbitrary files from writable firmware directories and thereby expose sensitive information or compromise the controller.

A vulnerability classified as critical has been found in ScriptAndTools Online-Travling-System 1.0. Affected is an unknown function of the file /admin/viewpackage.php. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in ScriptAndTools eCommerce-website-in-PHP 3.0 and classified as problematic. This issue affects some unknown processing of the file /admin/subscriber-csv.php. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK A720R 4.1.5cu.374. It has been classified as problematic. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Config Handler. The manipulation of the argument topicurl with the input getInitCfg/getSysStatusCfg leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK A720R 4.1.5cu.374. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in ScriptAndTools Online-Travling-System 1.0. It has been classified as critical. This affects an unknown part of the file /admin/viewenquiry.php. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Weitong Mall 1.0.0. This vulnerability affects unknown code of the file /queryTotal of the component Product Statistics Handler. The manipulation of the argument isDelete with the input 1 leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in Weitong Mall 1.0.0. This affects an unknown part of the file /historyList of the component Product History Handler. The manipulation of the argument isDelete with the input 1 leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in baseweb JSite 1.0. This affects an unknown part of the file /druid/index.html of the component Apache Druid Monitoring Console. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.9, 26.0.4, and 27.0.1, unauthenticated users could send a DAV request which reveals whether a calendar or an address book with the given identifier exists for the victim. Nextcloud Server versions 25.0.9, 26.0.4, and 27.0.1 and Nextcloud Enterprise Server versions 25.0.9, 26.0.4, and 27.0.1 contain a patch for this issue. No known workarounds are available.

Vulnerability in the Oracle Application Object Library product of Oracle E-Business Suite (component: Core). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Application Object Library. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Application Object Library accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N).

A vulnerability has been found in TOTOLINK A3000RU up to 5.9c.5185 and classified as problematic. This vulnerability affects unknown code of the file /cgi-bin/ExportIbmsConfig.sh of the component IBMS Configuration File Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in Tenda FH1202 1.2.0.14(408). Affected by this issue is some unknown functionality of the file /default.cfg. The manipulation of the argument these leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Incorrect access control in the Maintenance module of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows authenticated attackers with low-level privileges to arbitrarily change the high-privileged account passwords and escalate privileges.