An issue was discovered on the D-Link DWR-932B router. qmiweb allows command injection with ` characters.

Command injection vulnerability in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A remote code execution (RCE) vulnerability exists in the parisneo/lollms-webui, specifically within the 'open_file' module, version 9.5. The vulnerability arises due to improper neutralization of special elements used in a command within the 'open_file' function. An attacker can exploit this vulnerability by crafting a malicious file path that, when processed by the 'open_file' function, executes arbitrary system commands or reads sensitive file content. This issue is present in the code where subprocess.Popen is used unsafely to open files based on user-supplied paths without adequate validation, leading to potential command injection.

SequenceServer lets you rapidly set up a BLAST+ server with an intuitive user interface for personal or group use. Several HTTP endpoints did not properly sanitize user input and/or query parameters. This could be exploited to inject and run unwanted shell commands. This vulnerability has been fixed in 3.1.2.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

Delta Electronics DIAView has Command Injection vulnerability.

An issue in the handler function in /goform/telnet of Tenda FH1201 v1.2.0.14 (408) allows attackers to execute arbitrary commands via a crafted HTTP request.

A vulnerability was determined in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This impacts the function getInformation of the file /equipment/get_Information of the component HTTP POST Request Handler. Executing a manipulation of the argument fortEquipmentIp can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

HP OpenView Network Node Manager 6.2 through 7.50 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) node parameter to connectedNodes.ovpl, (2) cdpView.ovpl, (3) freeIPaddrs.ovpl, and (4) ecscmg.ovpl.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the cmd parameter in the webcmd function.

Sharp NEC Displays ((UN462A R1.300 and prior to it, UN462VA R1.300 and prior to it, UN492S R1.300 and prior to it, UN492VS R1.300 and prior to it, UN552A R1.300 and prior to it, UN552S R1.300 and prior to it, UN552VS R1.300 and prior to it, UN552 R1.300 and prior to it, UN552V R1.300 and prior to it, UX552S R1.300 and prior to it, UX552 R1.300 and prior to it, V864Q R2.000 and prior to it, C861Q R2.000 and prior to it, P754Q R2.000 and prior to it, V754Q R2.000 and prior to it, C751Q R2.000 and prior to it, V984Q R2.000 and prior to it, C981Q R2.000 and prior to it, P654Q R2.000 and prior to it, V654Q R2.000 and prior to it, C651Q R2.000 and prior to it, V554Q R2.000 and prior to it, P404 R3.200 and prior to it, P484 R3.200 and prior to it, P554 R3.200 and prior to it, V404 R3.200 and prior to it, V484 R3.200 and prior to it, V554 R3.200 and prior to it, V404-T R3.200 and prior to it, V484-T R3.200 and prior to it, V554-T R3.200 and prior to it, C501 R2.000 and prior to it, C551 R2.000 and prior to it, C431 R2.000 and prior to it) allows an attacker a buffer overflow and to execute remote code by sending long parameters that contains specific characters in http request.

A vulnerability was found in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This affects the function portValidate of the file /fort/ip_and_port/port_validate of the component HTTP POST Request Handler. Performing a manipulation of the argument port results in command injection. The attack can be initiated remotely. The exploit has been made public and could be used.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_hour_value` POST parameter.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

git-fastclone before 1.0.5 passes user modifiable strings directly to a shell command. An attacker can execute malicious commands by modifying the strings that are passed as arguments to "cd " and "git clone " commands in the library.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_min_value` POST parameter.

xml_security.rb in the ruby-saml gem before 1.0.0 for Ruby allows XPath injection and code execution because prepared statements are not used.

FOG is a cloning/imaging/rescue suite/inventory management system. Prior to 1.5.10.34, packages/web/lib/fog/reportmaker.class.php in FOG was affected by a command injection via the filename parameter to /fog/management/export.php. This vulnerability is fixed in 1.5.10.34.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_week_value` POST parameter.

Sourcecodester Poultry Farm Management System v1.0 contains an Unauthenticated Remote Code Execution (RCE) vulnerability via the productimage parameter at /farm/product.php.

The Delta Electronics DVW-W02W2-E2 devices expose a web administration interface to users. This interface implements multiple features that are affected by command injections and stack overflows vulnerabilities. Successful exploitation of these flaws would allow remote unauthenticated attackers to gain remote code execution with elevated privileges on the affected devices. This issue affects DVW-W02W2-E2 through version 2.5.2.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a vulnerability can be exploited to manipulate routers by passing malicious shell commands through the s2s API.

A vulnerability classified as critical has been found in Tenda AC500 2.0.1.9(1307). Affected is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261144. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in SeaCMS <=12.9 which allows remote attackers to execute arbitrary code via admin_ping.php.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

WAYOS FBM-291W 19.09.11V was discovered to contain a command injection vulnerability via the component /upgrade_filter.asp.

Roundcube Webmail before 1.5.7 and 1.6.x before 1.6.7 on Windows allows command injection via im_convert_path and im_identify_path. NOTE: this issue exists because of an incomplete fix for CVE-2020-12641.

A remote command execution (RCE) vulnerability in NextGen Mirth Connect v4.3.0 allows attackers to execute arbitrary commands on the hosting server.

Beijing Digital China Cloud Technology Co., Ltd. DCME-320 v.7.4.12.60 has a command execution vulnerability, which can be exploited to obtain device administrator privileges via the getVar function in the code/function/system/tool/ping.php file.

Command injection vulnerability in ELECOM and LOGITEC wireless LAN routers allows a remote unauthenticated attacker to execute an arbitrary command by sending a specially crafted request to a certain port of the web management page. Affected products and versions are as follows: WRC-1167GHBK3-A v1.24 and earlier, WRC-F1167ACF2 all versions, WRC-600GHBK-A all versions, WRC-733FEBK2-A all versions, WRC-1467GHBK-A all versions, WRC-1900GHBK-A all versions, and LAN-W301NR all versions.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection via the host_time parameter in the NTPSyncWithHost function.

A vulnerability was identified in Ruijie WS7204-A 2017.06.15. Affected by this vulnerability is an unknown functionality of the file /itbox_pi/branch_import.php?a=branch_list. Such manipulation of the argument province leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, and R9000 before 1.0.4.26.

Remote Code Execution has been discovered in OpenText™ iManager 3.2.6.0200. The vulnerability can trigger command injection and insecure deserialization issues.

Mocodo Mocodo Online 4.2.6 and below does not properly sanitize the sql_case input field in /web/generate.php, allowing remote attackers to execute arbitrary commands and potentially command injection, leading to remote code execution (RCE) under certain conditions.

A command inject vulnerability allows an attacker to perform command injection on Windows applications that indirectly depend on the CreateProcess function when the specific conditions are satisfied.

Accellion File Transfer Appliance before FTA_9_11_210 allows remote attackers to execute arbitrary code via shell metacharacters in the oauth_token parameter.

Heights Telecom ERO1xS-Pro Dual-Band FW version BZ_ERO1XP.025.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-822+ V1.0.5 was found to contain a command injection in ftext function of upload_firmware.cgi, which allows remote attackers to execute arbitrary commands via shell.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the ipurl parameter at /API/info form endpoint.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection vulnerability via the ussd parameter in the setUssd function.

A flaw has been found in Comfast CF-N1 2.6.0. Affected is the function ntp_timezone of the file /usr/bin/webmgnt. Executing manipulation of the argument timestr can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used.