Zoho ManageEngine ADSelfService Plus through 6101 is vulnerable to unauthenticated Remote Code Execution while changing the password.

Genexis PLATINUM 4410 2.1 P4410-V2-1.28 devices allow remote attackers to execute arbitrary code via shell metacharacters to sys_config_valid.xgi, as demonstrated by the sys_config_valid.xgi?exeshell=%60telnetd%20%26%60 URI.

The @ronomon/opened library before 1.5.2 is vulnerable to a command injection vulnerability which would allow a remote attacker to execute commands on the system if the library was used with untrusted input.

A command injection vulnerabilities have been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.1.1540 build 20210107. QNAP Systems Inc. QuTS hero versions prior to h4.5.1.1582 build 20210217.

Remote Code Execution in cominput.jsp and comoutput.jsp in Northstar Technologies Inc NorthStar Club Management 6.3 allows remote unauthenticated users to inject and execute arbitrary system commands via the unsanitized user-controlled "command" and "commandvalues" parameters.

LUCY Security Awareness Software through 4.7.x allows unauthenticated remote code execution because the Migration Tool (in the Support section) allows upload of .php files within a system.tar.gz file. The .php file becomes accessible with a public/system/static URI.

Discord-Recon is a bot for the Discord chat service. Versions of Discord-Recon 0.0.3 and prior contain a vulnerability in which a remote attacker is able to overwrite any file on the system with the command results. This can result in remote code execution when the user overwrite important files on the system. As a workaround, bot maintainers can edit their `setting.py` file then add `<` and `>` into the `RCE` variable inside of it to fix the issue without an update. The vulnerability is patched in version 0.0.4.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability exists in the SaveConfigFile function of the RACompare Service, which may allow for OS command injection. This vulnerability may allow a remote, unauthenticated attacker to execute arbitrary commands in Rockwell Automation FactoryTalk AssetCentre v10.00 and earlier.

Command Injection in Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted "action/umountUSBPartition" request. This occurs because the "formSetUSBPartitionUmount" function executes the "doSystemCmd" function with untrusted input.

Several high privileged APIs on the Vizio P65-F1 6.0.31.4-2 and E50x-E1 10.0.31.4-2 Smart TVs do not enforce access controls, allowing an unauthenticated threat actor to access privileged functionality, leading to OS command execution. The specific attack methodology is a file upload.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

A command injection vulnerability in the API of the Wavlink WL-WN531P3 router, version M31G3.V5030.201204, allows an attacker to achieve unauthorized remote code execution via a malicious POST request through /cgi-bin/adm.cgi.

The Metro Development Server, which is opened by the React Native Community CLI, binds to external interfaces by default. The server exposes an endpoint that is vulnerable to OS command injection. This allows unauthenticated network attackers to send a POST request to the server and run arbitrary executables. On Windows, the attackers can also execute arbitrary shell commands with fully controlled arguments.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175022.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175091.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. This vulnerability is due to an incomplete fix for CVE-2020-4211. IBM X-Force ID: 181724.

An issue was discovered in the list function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

An issue was discovered in the remove function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

The DHCP client on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allows unauthenticated remote code execution as root because /etc/services/INET/inet_ipv4.php mishandles shell metacharacters, affecting generated files such as WAN-1-udhcpc.sh.

A security vulnerability has been detected in D-Link DAP-2695 2.00RC13. The impacted element is the function sub_4174B0 of the component Firmware Update Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

TinyCheck before commits 9fd360d and ea53de8 was vulnerable to command injection due to insufficient checks of input parameters in several places.

Edimax EW-7438RPn-v3 Mini 1.27 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary commands through the /goform/mp endpoint. Attackers can exploit the vulnerability by sending crafted POST requests with command injection payloads to download and execute malicious scripts on the device.

Pinger 1.0 contains a remote code execution vulnerability that allows attackers to inject shell commands through the ping and socket parameters. Attackers can exploit the unsanitized input in ping.php to write arbitrary PHP files and execute system commands by appending shell metacharacters.

oal_ipt_addBridgeIsolationRules on TP-Link TL-WR840N 6_EU_0.9.1_4.16 devices allows OS command injection because a raw string entered from the web interface (an IP address field) is used directly for a call to the system library function (for iptables). NOTE: oal_ipt_addBridgeIsolationRules is not the only function that calls util_execSystem.

An issue was discovered in the crunch function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

An issue was discovered in the singleCrunch function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

Sickbeard alpha contains a remote command injection vulnerability that allows unauthenticated attackers to execute arbitrary commands through the extra scripts configuration. Attackers can set malicious commands in the extra scripts field and trigger processing to execute remote code on the vulnerable Sickbeard installation.

Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote attackers to execute arbitrary commands or set a new password via shell metacharacters to the goform/setSysAdm page.

A vulnerability in the web-based management interface of Cisco DNA Spaces Connector could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underling operating system with privileges of the web-based management application, which is running as a restricted user. This could result in changes being made to pages served by the web-based management application impacting the integrity or availability of the web-based management application.

KLog Server 2.4.1 allows OS command injection via shell metacharacters in the actions/authenticate.php user parameter.

An unauthenticated command-execution vulnerability exists in TerraMaster TOS through 4.2.06 via shell metacharacters in the Event parameter in include/makecvs.php during CSV creation.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not properly sanitize user input on several locations, which may allow an attacker to inject arbitrary commands.

D-link DIR-816 A2 v1.10 is affected by a remote code injection vulnerability. An HTTP request parameter can be used in command string construction in the handler function of the /goform/dir_setWanWifi, which can lead to command injection via shell metacharacters in the statuscheckpppoeuser parameter.

An issue was discovered in ClusterLabs Hawk 2.x through 2.3.0-x. There is a Ruby shell code injection issue via the hawk_remember_me_id parameter in the login_from_cookie cookie. The user logout routine could be used by unauthenticated remote attackers to execute code as hauser.

HGiga MailSherlock does not validate specific parameters properly. Attackers can use the vulnerability to launch Command inject attacks remotely and execute arbitrary commands of the system.

The iSherlock developed by Hgiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. This vulnerability has already been exploited. Please update immediately.

OS command injection vulnerability in Init function in QSAN XEVO allows remote attackers to execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

A remote code execution vulnerability occurs in OpenTSDB through 2.4.0 via command injection in the yrange parameter. The yrange value is written to a gnuplot file in the /tmp directory. This file is then executed via the mygnuplot.sh shell script. (tsd/GraphHandler.java attempted to prevent command injections by blocking backticks but this is insufficient.)

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "command" parameter is directly passed to the attacker, allowing them to control the "command" field to attack the OS.

A remote code execution vulnerability in the installUpdateThemePluginAction function in index.php in WonderCMS 3.1.3, allows remote attackers to upload a custom plugin which can contain arbitrary code and obtain a webshell via the theme/plugin installer.

An os command injection vulnerability exists in the confsrv ucloud_add_new_node functionality of TCL LinkHub Mesh Wifi MS1G_00_01.00_14. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a malicious packet to trigger this vulnerability.

Remote Command Execution (RCE) vulnerability in TerraMaster TOS <= 4.2.06 allow remote unauthenticated attackers to inject OS commands via /include/makecvs.php in Event parameter.

Zeroshell 3.9.3 contains a command injection vulnerability in the /cgi-bin/kerbynet StartSessionSubmit parameter that could allow an unauthenticated attacker to execute a system command by using shell metacharacters and the %0a character.

This affects all versions of package s3-kilatstorage.

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. Command injection can occur in "upload tftp syslog" and "upload tftp configuration" in the CLI via a crafted filename.

An OS command injection vulnerability has been found on EasyPHP Webserver affecting version 14.1. This vulnerability could allow an attacker to get full access to the system by sending a specially crafted exploit to the /index.php?zone=settings parameter.

An issue was discovered in URVE Build 24.03.2020. By using the _internal/pc/vpro.php?mac=0&ip=0&operation=0&usr=0&pass=0%3bpowershell+-c+" substring, it is possible to execute a Powershell command and redirect its output to a file under the web root.

A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.

SITOS six Build v6.2.1 allows an attacker to inject arbitrary PHP commands. As a result, an attacker can compromise the running server and execute system commands in the context of the web user.