A flaw was found in the X.Org X server's XKB key types request validation. A local attacker could send a specially crafted request to the X server, leading to an out-of-bounds memory access vulnerability. This could result in the disclosure of sensitive information or cause the server to crash, leading to a Denial of Service (DoS). In certain configurations, higher impact outcomes may be possible.

A flaw was found in the QEMU Guest Agent service for Windows. A local unprivileged user may be able to manipulate the QEMU Guest Agent's Windows installer via repair custom actions to elevate their privileges on the system.

NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel mode layer handler, where improper privilege management can lead to escalation of privileges and information disclosure.

NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_mp4_module module, which might allow an attacker to trigger a buffer over-read or over-write to the NGINX worker memory resulting in its termination or possibly code execution, using a specially crafted MP4 file. This issue affects NGINX Open Source and NGINX Plus if it is built with the ngx_http_mp4_module module and the mp4 directive is used in the configuration file. Additionally, the attack is possible only if an attacker can trigger the processing of a specially crafted MP4 file with the ngx_http_mp4_module module. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

NVIDIA vGPU manager contains a vulnerability in the vGPU plugin, in which an input offset is not validated, which may lead to a buffer overread, which in turn may cause tampering of data, information disclosure, or denial of service. This affects vGPU version 8.x (prior to 8.6) and version 11.0 (prior to 11.3).

In the Linux kernel, the following vulnerability has been resolved: xfrm: hold dev ref until after transport_finish NF_HOOK After async crypto completes, xfrm_input_resume() calls dev_put() immediately on re-entry before the skb reaches transport_finish. The skb->dev pointer is then used inside NF_HOOK and its okfn, which can race with device teardown. Remove the dev_put from the async resumption entry and instead drop the reference after the NF_HOOK call in transport_finish, using a saved device pointer since NF_HOOK may consume the skb. This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip the okfn. For non-transport exits (decaps, gro, drop) and secondary async return points, release the reference inline when async is set.

In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done.

NVIDIA vGPU software contains a vulnerability in the Virtual GPU Manager (vGPU plugin), in which certain input data is not validated, which may lead to information disclosure, tampering of data, or denial of service. This affects vGPU version 12.x (prior to 12.2), version 11.x (prior to 11.4) and version 8.x (prior 8.7).

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)

NVIDIA Virtual GPU Manager NVIDIA vGPU manager contains a vulnerability in the vGPU plugin in which it allows guests to allocate some resources for which the guest is not authorized, which may lead to integrity and confidentiality loss, denial of service, or information disclosure. This affects vGPU version 8.x (prior to 8.6) and version 11.0 (prior to 11.3).

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Revert to operating out-of-place This mostly reverts commit 72548b093ee3 except for the copying of the associated data. There is no benefit in operating in-place in algif_aead since the source and destination come from different mappings. Get rid of all the complexity added for in-place operation and just copy the AD directly.

In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs.

In OCaml before 4.14.3 and 5.x before 5.4.1, a buffer over-read in Marshal deserialization (runtime/intern.c) enables remote code execution through a multi-phase attack chain. The vulnerability stems from missing bounds validation in the readblock() function, which performs unbounded memcpy() operations using attacker-controlled lengths from crafted Marshal data.

A flaw was found in the X.org server. Due to improperly tracked allocation size in _XkbSetCompatMap, a local attacker may be able to trigger a buffer overflow condition via a specially crafted payload, leading to denial of service or local privilege escalation in distributions where the X.org server is run with root privileges.

A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah.

systeminformation is a System and OS information library for node.js. In versions prior to 5.30.8, a command injection vulnerability in the `wifiNetworks()` function allows an attacker to execute arbitrary OS commands via an unsanitized network interface parameter in the retry code path. In `lib/wifi.js`, the `wifiNetworks()` function sanitizes the `iface` parameter on the initial call (line 437). However, when the initial scan returns empty results, a `setTimeout` retry (lines 440-441) calls `getWifiNetworkListIw(iface)` with the **original unsanitized** `iface` value, which is passed directly to `execSync('iwlist ${iface} scan')`. Any application passing user-controlled input to `si.wifiNetworks()` is vulnerable to arbitrary command execution with the privileges of the Node.js process. Version 5.30.8 fixes the issue.

A buffer overflow flaw was found, in versions from 2.6.34 to 5.2.x, in the way Linux kernel's vhost functionality that translates virtqueue buffers to IOVs, logged the buffer descriptors during migration. A privileged guest user able to pass descriptors with invalid length to the host when migration is underway, could use this flaw to increase their privileges on the host.

In Ansible, all Ansible Engine versions up to ansible-engine 2.8.5, ansible-engine 2.7.13, ansible-engine 2.6.19, were logging at the DEBUG level which lead to a disclosure of credentials if a plugin used a library that logged credentials at the DEBUG level. This flaw does not affect Ansible modules, as those are executed in a separate process.

In GnuPG before 2.5.17, a stack-based buffer overflow exists in tpm2daemon during handling of the PKDECRYPT command for TPM-backed RSA and ECC keys.

MUNGE is an authentication service for creating and validating user credentials. From 0.5 to 0.5.17, local attacker can exploit a buffer overflow vulnerability in munged (the MUNGE authentication daemon) to leak cryptographic key material from process memory. With the leaked key material, the attacker could forge arbitrary MUNGE credentials to impersonate any user (including root) to services that rely on MUNGE for authentication. The vulnerability allows a buffer overflow by sending a crafted message with an oversized address length field, corrupting munged's internal state and enabling extraction of the MAC subkey used for credential verification. This vulnerability is fixed in 0.5.18.

TensorFlow HDF5 Library Uncontrolled Search Path Element Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of TensorFlow. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of plugins. The application loads plugins from an unsecured location. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of a target user. Was ZDI-CAN-25480.

NVIDIA vGPU software contains a vulnerability in the Virtual GPU Manager (vGPU plugin), where an input index is not validated, which may lead to buffer overrun, which in turn may cause data tampering, information disclosure, or denial of service.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, data tampering, or information disclosure.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause the use of an out-of-range pointer offset, which may lead to data tampering, data loss, information disclosure, or denial of service.

A vulnerability was found in X.Org. This security flaw occurs because the XkbCopyNames function left a dangling pointer to freed memory, resulting in out-of-bounds memory access on subsequent XkbGetKbdByName requests.. This issue can lead to local privileges elevation on systems where the X server is running privileged and remote code execution for ssh X forwarding sessions.

NVIDIA vGPU Display Driver for Linux guest contains a vulnerability in a D-Bus configuration file, where an unauthorized user in the guest VM can impact protected D-Bus endpoints, which may lead to code execution, denial of service, escalation of privileges, information disclosure, or data tampering.

A vulnerability was found in cri-o. This issue allows the addition of arbitrary lines into /etc/passwd by use of a specially crafted environment variable.

NVIDIA vGPU software contains a vulnerability in the Virtual GPU Manager (vGPU plugin), where an input index is not validated, which may lead to buffer overrun, which in turn may cause data tampering, information disclosure, or denial of service.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() nft_map_catchall_activate() has an inverted element activity check compared to its non-catchall counterpart nft_mapelem_activate() and compared to what is logically required. nft_map_catchall_activate() is called from the abort path to re-activate catchall map elements that were deactivated during a failed transaction. It should skip elements that are already active (they don't need re-activation) and process elements that are inactive (they need to be restored). Instead, the current code does the opposite: it skips inactive elements and processes active ones. Compare the non-catchall activate callback, which is correct: nft_mapelem_activate(): if (nft_set_elem_active(ext, iter->genmask)) return 0; /* skip active, process inactive */ With the buggy catchall version: nft_map_catchall_activate(): if (!nft_set_elem_active(ext, genmask)) continue; /* skip inactive, process active */ The consequence is that when a DELSET operation is aborted, nft_setelem_data_activate() is never called for the catchall element. For NFT_GOTO verdict elements, this means nft_data_hold() is never called to restore the chain->use reference count. Each abort cycle permanently decrements chain->use. Once chain->use reaches zero, DELCHAIN succeeds and frees the chain while catchall verdict elements still reference it, resulting in a use-after-free. This is exploitable for local privilege escalation from an unprivileged user via user namespaces + nftables on distributions that enable CONFIG_USER_NS and CONFIG_NF_TABLES. Fix by removing the negation so the check matches nft_mapelem_activate(): skip active elements, process inactive ones.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: cancel mlo_scan_start_wk mlo_scan_start_wk is not canceled on disconnection. In fact, it is not canceled anywhere except in the restart cleanup, where we don't really have to. This can cause an init-after-queue issue: if, for example, the work was queued and then drv_change_interface got executed. This can also cause use-after-free: if the work is executed after the vif is freed.

zlib versions up to and including 1.3.1.2 include a global buffer overflow in the untgz utility located under contrib/untgz. The vulnerability is limited to the standalone demonstration utility and does not affect the core zlib compression library. The flaw occurs when a user executes the untgz command with an excessively long archive name supplied via the command line, leading to an out-of-bounds write in a fixed-size global buffer.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, information disclosure, or data tampering.

In the Linux kernel 4.14.x, 4.15.x, 4.16.x, 4.17.x, and 4.18.x before 4.18.13, faulty computation of numeric bounds in the BPF verifier permits out-of-bounds memory accesses because adjust_scalar_min_max_vals in kernel/bpf/verifier.c mishandles 32-bit right shifts.

RHACM: unauthenticated SSRF in console API endpoint. A Server-Side Request Forgery (SSRF) vulnerability was found in the console API endpoint from Red Hat Advanced Cluster Management for Kubernetes (RHACM). An attacker could take advantage of this as the console API endpoint is missing an authentication check, allowing unauthenticated users making requests.

An allocation of memory without limits, that could result in the stack clashing with another memory region, was discovered in systemd-journald when many entries are sent to the journal socket. A local attacker, or a remote one if systemd-journal-remote is used, may use this flaw to crash systemd-journald or execute code with journald privileges. Versions through v240 are vulnerable.

A flaw was found in the way pacemaker's client-server authentication was implemented in versions up to and including 2.0.0. A local attacker could use this flaw, and combine it with other IPC weaknesses, to achieve local privilege escalation.

A flaw was found in CRI-O. The fix for a previous vulnerability (CVE-2022-4318) was incorrect, allowing it to be bypassed. An attacker capable of setting environment variables on a container can inject a newline character into the HOME environment variable. This issue allows the addition of arbitrary lines into /etc/passwd by use of a specially crafted environment variable.

A vulnerability was found in Perl. This security issue occurs while Perl for Windows relies on the system path environment variable to find the shell (`cmd.exe`). When running an executable that uses the Windows Perl interpreter, Perl attempts to find and execute `cmd.exe` within the operating system. However, due to path search order issues, Perl initially looks for cmd.exe in the current working directory. This flaw allows an attacker with limited privileges to place`cmd.exe` in locations with weak permissions, such as `C:\ProgramData`. By doing so, arbitrary code can be executed when an administrator attempts to use this executable from these compromised locations.

A privilege escalation flaw was found in Ceph. Ceph-crash.service allows a local attacker to escalate privileges to root in the form of a crash dump, and dump privileged information.

A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.

A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.

It was discovered that libvirtd before versions 4.10.1 and 5.4.1 would permit read-only clients to use the virDomainSaveImageGetXMLDesc() API, specifying an arbitrary path which would be accessed with the permissions of the libvirtd process. An attacker with access to the libvirtd socket could use this to probe the existence of arbitrary files, cause denial of service or cause libvirtd to execute arbitrary programs.

Invalid memory access in Sentencepiece versions less than 0.2.1 when using a vulnerable model file, which is not created in the normal training procedure.

A flaw was found in the foreman-mcp-server. A session management vulnerability in the MCP Server allows unauthenticated attackers to hijack active administrative sessions due to an improper cache of authenticated client connections, by trusting a non-secret session ID without re-validating authentication tokens and by logging all newly created session IDs to standard logs. This issue can result in privilege escalation and infrastructure-wide code execution.